My Galaxy Note 3 Blank Screen No Charging No Download Mode No Recovery Mode Connect Pc Show HS-USB QDLoader 9008
Sounds like the phone is bricked. In order to revive it, you should try booing the phone with a debrick image on an sd card.
Is this the one you posted about bricked before and new motherboards ???
Related
First, Sorry abut my English
so this it my sad story:crying:…
after i rooted my device and tried to flash twrp recovery via (flashify.apk)
i got soft brick then i tried to fix it by this guide:
http://forum.xda-developers.com/showthread.php?t=2582142
maybe I did something wrong
so then the light screen device shutdown
now my phone not start and no screen light
but When I Plug it into windows 7 .It first time detect to qhsusb_bulk
and this download driver qualcomm hs-usb diagnostics 9008
so someone can plz help me to fix it ???
I buy it just one week ago :crying::crying:
Hello,
I think my Samsung Galaxy S4 - GT-9506 is Hard Bricked. Screen is black - regardless if i press the power-button, home and Volume-Down or Up. Odin didn't recognize the Phone. But i installed OPST cause the phone was recognized as Qualcom HS-USB QDLoader 9008. When i start the QPST Software Download Program it tells me that there is a phone connected to COM6 in Download Mode. I think this is a good sign but i don't know how to use QPST and I also have no recovery Image for QPST and my GT-9506. Can somebody help me?
Nobody here who can help me?
Hi there,
Well, I am a samsung s4 i9506 owner. This weekend, I actually hard brick my phone and now it doesn't respond. It doesn't even start, No screen flash, No led flash. When I try to connect it to PC, it says Windows cannot recognize this device. However, I figured it out how to connect my phone to pc, its by holding the power button for one minute and then plug in the usb cable, which is connected to the pc on the other end. Now it shows, RELINK HS-USB QDLoader 9008 (Com 6). I tried everything whichever I could found after google search but nothing pls help
I think the people in the below thread have the same problem.
http://forum.xda-developers.com/galaxy-s4/help/samsung-s4-fullbrick-t3284237
Hi,
My phone got bricked while installing and update. The phone i hard bricked it shows no signs of life and does not go to Download or recovery mode. Not by button combination or USB Jig.
When I connect the phone to the laptop it shows qualcomm hs-usb qdloader 9008. Is there any way to rescue the phone and debrick it?
Thanks :crying:
Come on people there should be a solution to this crap
http://www.droidsavvy.com/unbrick-qualcomm-mobiles/
The site listed above is all the information I currently have on my problem. I know enough to understand a bit of what's going on but I'm no coder or hacker. I've dabled (meaning rooting S3 Straight Talk, Nexus 7, and S7 Edge).
So my phone is black screen, cannot boot/won't boot. It's an S7 Edge so I'm not pulling the battery out since it won't be water-proof then.
+ I cannot boot into bootloader
+ I cannot boot into recovery
+ Nothing lights up, the LED indicator, the screen, buttons, all unresponsive.
+ ADB won't recognize my phone currently so I can't use that
+ Odin won't recognize the phone so I can't use that
My S7 Edge *plugged into my pc* comes up as "RELINK HS-USB QDLoader 9008 (COM 7)" under 'Ports (COM & LPT)' in DEVMGMT.MSC (Device Manager).
I installed the drivers for Qualcomm following the tutorial from the site above. My phone is now recognized as "Qualcomm HS-USB QDLoader 9008 (COM 7)". I cannot find a BACKUP.IMG of my device since I don't know if that's what I'm supposed to be looking for ("BACKUP.IMG") or if it's just a "compiled" version of the five Odin-flashable images I downloaded.
So, copied from their website;
"Guide, if you are NEW “Qualcomm HS-USB QDLoader 9008” MODE
If you are that lucky person, (I'm not) who is stuck in the NEW “Qualcomm HS-USB QDLoader 9008” mode, to be honest, the steps to be taken are a lot easier. However, you need somebody having the same phone as yours to upload your device’s complete eMMC image for you."
So I guess what I'm posting this for is to find out
1.) if anyone else is having similar issues
2.) if there have been any successful attempts at using this method to recover from hard brick
3.) if someone could go waaaaay out of their way to give me their eMMC file
^ I don't think it has to be a Sprint phone, I just need it to boot into bootloader (I THINK)
I'll update with my progress below!
So I contacted JTag repairs and my response is as follows:
"Hello ------ and thank you for contacting me.
No problem for the questions ...but unfortunately I have a short answer :
The S7 Edge uses UFS Memory instead of Emmc memory, there are no JTAG tools that can communicate this UFS memory...this means it cannot be unbricked with JTAG or similar tools."
So here's the information for anyone else. You'll need a program that can communicate to a hard bricked S7 Edge and you'll need a UFS image backup of a functioning device.
Special thanks to @godpowerrr for trying to help me out with it.
Notes: don't hard brick your S7 yet! Lol.
Have you found any solution? I'm also stuck in the same situation with G935A S7 Edge (AT&T variant)