Related
So I am installing the Nexus 7 in my car as the head unit, but am now stuck with this issue.
I unlocked, and rooted the device, and used the fastboot oem off-mode-charge 0 command and it worked.
Anytime the Nexus 7 receives power it turns on.
However the device battery died completely and now when I plug it in to charge, the screen stays black, buttons do nothing, and eventually it boots up, but immediatley powers off as the battery is at 0 % and has the red ! mark.
I can't even use the fastboot command to reverse it since the device can't stay on.
What the heck can I do?
Type the reverse command and it will say "waiting for device". Connect your device and booting into bootloader even for a split second should push the command.
Username invalid said:
Type the reverse command and it will say "waiting for device". Connect your device and booting into bootloader even for a split second should push the command.
Click to expand...
Click to collapse
That's what I thought and I tried it, but nothing happened. It stayed in bootloader for about a minute but the command prompt stayed at waiting for device.
I'm not 100% sure but I think I used Nexus Root Toolkit to go back to the stock rom, which would have unrooted the device.
Which also means debugging is not active.
Does it need to be rooted and debug active to be able to push?
I know the bootloader still says unlocked.
@Username invalid
Yes, but will the command be executed before the device dies again?
---------- Post added at 09:46 AM ---------- Previous post was at 09:44 AM ----------
When you're in bootloader, you don't need debugging enabled since the fastboot protocol comes into play, not ADB (which requires debugging to be enabled). Root is also unnecessary. At least that's what I have learnt in the past 5 months I have had this.
Jeremi1023 said:
That's what I thought and I tried it, but nothing happened. It stayed in bootloader for about a minute but the command prompt stayed at waiting for device.
I'm not 100% sure but I think I used Nexus Root Toolkit to go back to the stock rom, which would have unrooted the device.
Which also means debugging is not active.
Does it need to be rooted and debug active to be able to push?
I know the bootloader still says unlocked.
Click to expand...
Click to collapse
No, you do not need be rooted or have USB debugging enabled to use Fastboot. What Android Bootloader Interface driver version do you have installed on your computer? Did you check by typing "fastboot devices" if your device is being recognized?
sgt. meow said:
@Username invalid
Yes, but will the command be executed before the device dies again?
Click to expand...
Click to collapse
There is not enough time for me to set debugging on before the device dies. It stays on for maybe 5 seconds at the home screen then powers off.
Is there a way I could charge the battery a little bit bypassing the Nexus?
Can I splice in the pos and neg of the usb charger to the pos and neg of the battery?
I'd highly discourage the battery direct charging bit.
Username invalid said:
No, you do not need be rooted or have USB debugging enabled to use Fastboot. What Android Bootloader Interface driver version do you have installed on your computer? Did you check by typing "fastboot devices" if your device is being recognized?
Click to expand...
Click to collapse
I'm not sure at all.
I used the R3 Nexus 7 Superboot to push the original command. I had downloaded fastboot from somewhere else, and put it in the Superboot folder to get it to push the command.
By the way sorry for taking so long to reply in between. Since I am a new user, I have to wait the 5 minutes in between posts.
Jeremi1023 said:
That's what I thought and I tried it, but nothing happened. It stayed in bootloader for about a minute but the command prompt stayed at waiting for device.
I'm not 100% sure but I think I used Nexus Root Toolkit to go back to the stock rom, which would have unrooted the device.
Which also means debugging is not active.
Does it need to be rooted and debug active to be able to push?
I know the bootloader still says unlocked.
Click to expand...
Click to collapse
Since your device was able to stay in bootloader for a minute, did you check if it was being recognized by your computer?
Username invalid said:
Since your device was able to stay in bootloader for a minute, did you check if it was being recognized by your computer?
Click to expand...
Click to collapse
I am assuming it was, as Windows chimed in as soon as the device had enough juice to turn on.
Jeremi1023 said:
I am assuming it was, as Windows chimed in as soon as the device had enough juice to turn on.
Click to expand...
Click to collapse
Try booting into bootloader again then typing "fastboot devices". Also go to your computer Device Manager > Android Devices > Android Bootloader Interface > Properties.
Username invalid said:
Try booting into bootloader again then typing "fastboot devices". Also go to your computer Device Manager > Android Devices > Android Bootloader Interface > Properties.
Click to expand...
Click to collapse
I will do that and let you know what I see.
Just gotta wait for the thing to turn on. It's very random right now.
Okay, I was able to get into bootloader, and I I did "fastboot devices" and nothing came up.
Also checked device manager and no Android or anything like it in there.
Username invalid said:
Try booting into bootloader again then typing "fastboot devices". Also go to your computer Device Manager > Android Devices > Android Bootloader Interface > Properties.
Click to expand...
Click to collapse
I see that it is coming up as unknown device under the USB section
I have tried the Nexus toolkit guide for installing the drivers to no avail.
When I try to update the drivers for "unknown device" and go to the path where they are, windows said the best drivers are already installed.
Jeremi1023 said:
I see that it is coming up as unknown device under the USB section
I have tried the Nexus toolkit guide for installing the drivers to no avail.
When I try to update the drivers for "unknown device" and go to the path where they are, windows said the best drivers are already installed.
Click to expand...
Click to collapse
http://d-h.st/kDu
Username invalid said:
http://d-h.st/kDu
Click to expand...
Click to collapse
Even with those drivers, Windows still says the best ones are installed and refuses to use them.
Jeremi1023 said:
Even with those drivers, Windows still says the best ones are installed and refuses to use them.
Click to expand...
Click to collapse
Uninstall your current one first.
Username invalid said:
Uninstall your current one first.
Click to expand...
Click to collapse
What I have done is use Nexus Toolkit to uninstall, like it says, anything having to do with nexus, google, samsung, etc. I reboot the computer, wait for the tablet to turn on for a few seconds and then windows chimes in and says the usb device malfunctioned and could not be installed. It shows up in device manager as Unknown Device, and when I try to update the drivers, it says they are updated and won't use the ones I chose.
Have I not fully uninstalled the old ones?
Jeremi1023 said:
What I have done is use Nexus Toolkit to uninstall, like it says, anything having to do with nexus, google, samsung, etc. I reboot the computer, wait for the tablet to turn on for a few seconds and then windows chimes in and says the usb device malfunctioned and could not be installed. It shows up in device manager as Unknown Device, and when I try to update the drivers, it says they are updated and won't use the ones I chose.
Have I not fully uninstalled the old ones?
Click to expand...
Click to collapse
I'm not sure. I stopped using the toolkit and do pretty much everything I need now through ADB. Do you have another computer you can use?
Username invalid said:
I'm not sure. I stopped using the toolkit and do pretty much everything I need now through ADB. Do you have another computer you can use?
Click to expand...
Click to collapse
Yeah I have a desktop I could try it on.
I've never plugged the Nexus in to the desktop, so it should be a complete clean install of drivers.
If Windows recognizes the nexus on the desktop, what should I do?
Do I need to uninstall anything it may install on its own?
I figure I will end up installing the drivers you previously provided.
Hi,
I tried a lot of other rooting applications and have had no luck with any of them. Then I found Wug's Nexus Root Toolkit. It works for my Nexus 4 (Jelly Bean 4.3) - until I came to the "Full Driver Configuration Guide" - where it gives a message: "ADB device was not found".
I have tried it over several times to no avail. Can anyone offer any clues as to what may be causing this?
btw, I am running the Wug's Nexus Root Toolkit v1.7.2 on Windows 8.
Thank you,
David
I was just having the same problem, and I realized after a while that I was making the STUPID mistake of not noticing that my phone was asking me to confirm USB debugging when the toolkit started searching for ADB devices. If you're as big of a dummy as I am (or just having an off day), this may be your problem
aaronwebstey said:
I was just having the same problem, and I realized after a while that I was making the STUPID mistake of not noticing that my phone was asking me to confirm USB debugging when the toolkit started searching for ADB devices. If you're as big of a dummy as I am (or just having an off day), this may be your problem
Click to expand...
Click to collapse
I am having the same problem. Where/how does the phone ask you to confirm USB debugging? It asks me when I turn it on, but not again later.
I have tried 3 or 4 different drivers, but, although the device is recognised by Windows 8, it is not recognised by Root Toolkit.
.... toolkits are the the devil...
They promote not learning what you're doing or what's actually happening in your devices so... there's posts like this.
please read this thread before touching your device
studacris said:
.... toolkits are the the devil...
They promote not learning what you're doing or what's actually happening in your devices so... there's posts like this.
please read this thread before touching your device
Click to expand...
Click to collapse
I'm not quite sure how this was supposed to help. My problem is that the ADB drivers do not seem to work on my computer. I have just tried installing the Android SDK (which comes with its own ADB drivers), having first uninstalled all the existing drivers. It did not help.
Not entirely sure where to go from here.
PDAnet's drivers may work. Simply install PDAnet (after uninstalling any previous attempted driver installations) to get the drivers.
studacris said:
PDAnet's drivers may work. Simply install PDAnet (after uninstalling any previous attempted driver installations) to get the drivers.
Click to expand...
Click to collapse
I had installed PDANet from within Root Toolkit, and it didn't work. Just now, I uninstalled everything again, and installed PDANet from their web site. Still get no ADB device in Root Toolkit. [NB I didn't have PDANet on the phone, but it seems to be there now]
I tried running adb from the android SDK, and it says "error: device not found".
However, I noted there was an adb prompt on the phone when I first plugged it in, this time (which I told to always accept).
[Later]
Wierd - it is now a bit further on. This is what I did:
Started PDANet on the phone, and enabled USB tethering.
Started PDANet on the computer, and it connected to the phone. At this point the USB debugging permission thing came up again, and I accepted it (also ticking the box to always accept).
Unticked USB tethering on the phone again.
Stopped PDANet on the computer (right click on icon, exit).
Tried the Root Toolkit again (pressed Root button), it connected to the device, and put it into fastboot mode.
The boot loader appeared on the phone, and the computer said "Checking Fastboot Status".
It seemed to stay like that for ever.
Killed the root toolkit. and tried again.
Left the computer for a while, and when I came back, it had completed.
So, it seems to be working now.
And when you try using fastboot directly instead of the toolkit....... what happens?
changing MTP to camera in USB connection mode did it for me...with MTP it showed correctly in device manager but the toolkit didn't recognise it
Gesendet von meinem Nexus 4 mit Tapatalk 4
studacris said:
And when you try using fastboot directly instead of the toolkit....... what happens?
Click to expand...
Click to collapse
I type "fastboot reboot" at the command prompt.
It replies "< waiting for device >"
I wait a few minutes.
Then I press ^C and the command prompt returns.
P.S. Changing the USB connection to camera doesn't make any difference to the above.
Best idea i didnt notice too
aaronwebstey said:
I was just having the same problem, and I realized after a while that I was making the STUPID mistake of not noticing that my phone was asking me to confirm USB debugging when the toolkit started searching for ADB devices. If you're as big of a dummy as I am (or just having an off day), this may be your problem
Click to expand...
Click to collapse
Thanx !!!!!!!
cmajetic said:
changing MTP to camera in USB connection mode did it for me...with MTP it showed correctly in device manager but the toolkit didn't recognise it
Gesendet von meinem Nexus 4 mit Tapatalk 4
Click to expand...
Click to collapse
Thank you so much! This solved it for me :good:
nikkilocke said:
I type "fastboot reboot" at the command prompt.
It replies "< waiting for device >"
I wait a few minutes.
Then I press ^C and the command prompt returns.
P.S. Changing the USB connection to camera doesn't make any difference to the above.
Click to expand...
Click to collapse
I got stuck the same way.
The way to got around was to change connection to camera -> the PC is intalling some drivers,
then turn off the USB debugging -> the PC is again installing some drivers,
then turn on the USB debugging -> "bingo" adb mode recognized by the toolkit
Now I can install and enjoy Kikat 4.4.1 :good:
cmajetic said:
changing MTP to camera in USB connection mode did it for me...with MTP it showed correctly in device manager but the toolkit didn't recognise it
Click to expand...
Click to collapse
I found the same solution, changing over from MTP to CAMERA suddenly had the toolkit recognise the phone and could boot it to unlock then root it... Previously, I had installed PDA drivers...
I am astonished how PATHETIC nexus phones/tablets are at simply connecting to a PC. I am baffled at the attempt by google to make their devices as UN-plug & play friendly as possible... bizarre! I have a N10, N7 and have had two N5's and all have the same PITA random disability....
grrr...
Mark.
So the Nexus toolkit is able to see the Nexus 7 as a media device but not Windows ?
marcelin99 said:
I got stuck the same way.
The way to got around was to change connection to camera -> the PC is intalling some drivers,
then turn off the USB debugging -> the PC is again installing some drivers,
then turn on the USB debugging -> "bingo" adb mode recognized by the toolkit
Now I can install and enjoy Kikat 4.4.1 :good:
Click to expand...
Click to collapse
So the Nexus 7 toolkit is able to see the Nexus 7 as media device with this method, but not Windows ? That's strange because Windows is supposed to see your files within the Nexus via Mtp mode. Is it that google removed the ability for Windows to be able to see Nexus 7 files in Android kit kat 4.4.2. What should I do then if I simply want to view files inside Nexus as a non root user ? B.T.W I'm currently on stock kitkat 4.4.2 build KOT49H. Therefore, I'd gladly appreciate it if anyone out there would answer this question and thanks in advance. Feel free to PM me on this so we can "talk" about this. : )
cmajetic said:
changing MTP to camera in USB connection mode did it for me...with MTP it showed correctly in device manager but the toolkit didn't recognise it
Gesendet von meinem Nexus 4 mit Tapatalk 4
Click to expand...
Click to collapse
Success.
Well, mtp connection works perfectly fine in my Windows 7 machine. But on my xp machine I could never get it to work no matter what driver combination I used.
I can see the reason they changed to mtp but I found mass storage to be much more user friendly.
Sent from my Nexus 4 using XDA Free mobile app
as others, I was using WUG kit to get back to stock. I was stuck without USB degugging options. Installing PDAnet did the trick, installing drivers so that I was able to get WUG working. I am now stock. All traces on my tinkering are gone. Later this week I will upgrade to a Galaxy Mega and trade in my Galaxy Nexus that I have loved for 3 plus years.
Stuck on fastboot screen
GranPaSmurf said:
as others, I was using WUG kit to get back to stock. I was stuck without USB degugging options. Installing PDAnet did the trick, installing drivers so that I was able to get WUG working. I am now stock. All traces on my tinkering are gone. Later this week I will upgrade to a Galaxy Mega and trade in my Galaxy Nexus that I have loved for 3 plus years.
Click to expand...
Click to collapse
Hi
Happy New Year to all! unfortunately I am left with the unusable nexus 7 that happened last night.
I was going crazy with the lags with lollipop and was waiting for the 5.0.5 update OTA but the delay was making me go crazy so I decided to take the risk of manually flashing the image using ADB and SDK.
Like many others pointed, I knew how to enable my computer to see my device by switching from MTP to PTP mode from my earlier rooting experience with Samsung, HTC and others. So that was not an issue for me.
I was following a tutorial from androidcentral and half way through I went to check a tutorial on youtube which I think caused the disaster. After I executed the adb devices no devices were detected and like I said I went and changed the MTP mode to off and bingo now my device was detected.
I executed device unlock and currently my device is in unlocked bootloaded state which is displayed in the fastboot screen where I am stuck now. Following the youtube instead of flashing each separately bootloader first and then the factory image I jumped to 'flash-all.bat' command...I saw something say on my command prompt on pc that completed in so many seconds or minutes which led me to get anxious and since no rebooting happened on the device I went and manually tried to press the power button.
From that time I am stuck on the fastboot screen. I can cycle through 'power off', restart booloader, recovery mode and start. But when I select 'restart bootloader' it comes to 'start' in the same mode and when I select that I can see a tiny 'Booting failed' in white letters in tiny fonts on the top left side of the 'Start'. I cannot go past this state.
Since I know the last time I had enabled 'usb debugging' and MTP off before everything went wrong I am presuming those states are still intact. I can see status on 'reboot bootloader' screen that my bootloader is unlocked.
Now, when I try to go through the process again my device is seen in device manager but when I send 'adb devices' command it cannot detect any devices. If my device is usable I can atleast go into settings to see if my MTP state and usb debugging status. Now I don't have that option. I even tried the Nexus Root Toolkit - everything is fine but until it tests the driver to finally say 'ADB device not found'.
After browsing so many posts I spotted there were some posts that said there is some discrepancy between the device id as listed by the driver to what actually is usb.inf, which all is too technical and overboard for me. And finally left me thinking that it is some issue of Windows PC as someone pointed that the ADB device was detected on a MAC. So I am now thinking to give it a shot in a mac machine as a final attempt to recover my device.
Anyone please suggest a solution, apologies if this is covered by someone elsewhere in the forum if so please point me there. I will make sure that from next time I will never do a manual flash of factory image.
please help!
It sounds like you are on top of it, but haven't hit the right combination yet. Thanks for the quote and I am sorry I am unable to offer any help. As mentioned in my post, I have switched to the Galaxy Mega and was pleasantly surprised by the OTA upgrade to 4.4. Now I am trying to figure out how to root it.
I have followed Heisenbergs instructions to the letter but when I issue the adb devices command it just returns the string "list of devices" and that's it. Fastboot devices doesn't work either.
So I'm stuck at the start. Can anyone help me? From what I can tell I may need drivers but I'm new to this so I don't know.
I can give anyone more info if they need it.
I believe part of the instructions are to install the Platform Tools, which should include drivers. Try running the SDK Manager and updating or installing the drivers again. Also ensure you have USB Debugging ON in your Developer settings and OEM Unlocking enabled. Lastly, tap the notification in your shade about the USB connection (I think it defaults to Charging Only) and change it to various modes. Mine seems to only work on PTP mode. When you run the adb devices command you will need to authorize the connection on the phone end the first time by clicking OK so make sure the screen is on and unlocked so you can see it.
Hope this helps.
peckaldee said:
I have followed Heisenbergs instructions to the letter but when I issue the adb devices command it just returns the string "list of devices" and that's it. Fastboot devices doesn't work either.
So I'm stuck at the start. Can anyone help me? From what I can tell I may need drivers but I'm new to this so I don't know.
I can give anyone more info if they need it.
Click to expand...
Click to collapse
u enable OEM Unlock under developer settings?
You enable USB debugging?
Me personally do not get any strings of data returned when im on fastboot
i open CMD, run ADB DEVICES, get message saying the port is opening, and then listing devices... which is empty
but i am able to flash anything i want using fastboot....
try this command and see if it works after that... fastboot reboot-bootloader
it should reboot bootloader for u.. thats a easy way to know its responding to u
Is the device showing properly in the Device Manager when it's connected to your system?
hEaTLoE said:
Is the device showing properly in the Device Manager when it's connected to your system?
Click to expand...
Click to collapse
It shows up in windows explorer as "Nexus 6p" when I plug in the USB cable.
I have USB debugging and unlock bootloader checked in settings.
My fastboot devices command returns nothing.
peckaldee said:
It shows up in windows explorer as "Nexus 6p" when I plug in the USB cable.
I have USB debugging and unlock bootloader checked in settings.
My fastboot devices command returns nothing.
Click to expand...
Click to collapse
Did you change the USB mode? Mine shows in Explorer as you described but won't work in ADB/Fastboot until I change it to PTP.
fury683 said:
Did you change the USB mode? Mine shows in Explorer as you described but won't work in ADB/Fastboot until I change it to PTP.
Click to expand...
Click to collapse
Yeah I tried every option. Nothing.
The instructions say the fastboot devices command should return my serial number and it does not.
When booted into the bootloader one it tells me on one line phone LOCKED and on another line says download mode DISABLED.
Don't know if this has anything to do with my problems but I still cannot get a return on the fastboot devices command in order to proceed with the unlock command of "fastboot flashing unlock"
remember that u need latest fastboot for this to work.
did u updated the SDK manager to the latest? i had to do that in order to work for 6P
chaco81 said:
remember that u need latest fastboot for this to work.
did u updated the SDK manager to the latest? i had to do that in order to work for 6P
Click to expand...
Click to collapse
I'm using sdk manager revision 24.4.1
peckaldee said:
I have followed Heisenbergs instructions to the letter but when I issue the adb devices command it just returns the string "list of devices" and that's it. Fastboot devices doesn't work either.
So I'm stuck at the start. Can anyone help me? From what I can tell I may need drivers but I'm new to this so I don't know.
I can give anyone more info if they need it.
Click to expand...
Click to collapse
I had the same issue ,it was down to when I plugged the phone into the PC for the first time,it installed the Google.USB driver ,but it didn't install the driver for the adb interface,I had to download it from Google and install it manually
I also had the same issue, I had an old Clockworkmod generic driver that I was using for my Samsung Galaxy S5 installed.
Go to Device manager (either type it in the start menu, or: right click This PC, click manage, and click device manager), plug in your unlocked Nexus 6P phone and watch for a new item to pop up. If it says android something, uninstall it. I had to uninstall 3 times, then reinstall the drivers from the SDK before it would work.
I used the skipsoft toolkit to install the fb drivers; worked for me. http://forum.xda-developers.com/nex...ol-skipsoft-android-toolkit-nexus-6p-t3234159
but like others said, you may have to manually remove any that are already installed in windows, although I think that is one of the options in the toolkit.
mbonus said:
I used the skipsoft toolkit to install the fb drivers; worked for me. http://forum.xda-developers.com/nex...ol-skipsoft-android-toolkit-nexus-6p-t3234159
but like others said, you may have to manually remove any that are already installed in windows, although I think that is one of the options in the toolkit.
Click to expand...
Click to collapse
This worked. Now my commands in terminal are working correctly. thanks all for the help
Got A device to pop up under the command adb devices, but nothing under fastboot devices. Any tips? Had to follow the skipsoft instructions to install adb/fastboot devices. Yes USB Debugging is on and the OEM unlocking is set to allow..
Christ I'm retarded. Sorry boys, thought my phone was in the bootloader when I was trying this command LOL
Same problem
peckaldee said:
When booted into the bootloader one it tells me on one line phone LOCKED and on another line says download mode DISABLED.
Don't know if this has anything to do with my problems but I still cannot get a return on the fastboot devices command in order to proceed with the unlock command of "fastboot flashing unlock"
Click to expand...
Click to collapse
I'm having the same problem. Did you ever figure out what was wrong?
mbonus said:
I used the skipsoft toolkit to install the fb drivers; worked for me. http://forum.xda-developers.com/nex...ol-skipsoft-android-toolkit-nexus-6p-t3234159
but like others said, you may have to manually remove any that are already installed in windows, although I think that is one of the options in the toolkit.
Click to expand...
Click to collapse
Solved my problem as well. Thanks!
Hi all
I tried Wug's Nexus Root Toolkit and i keep on getting the trouble shooting message when ever i try to either unlock the bootloader or make a back up,
I have tried the other way using the sdk tool kit and using cmd prompts but it wont list my device when i enter adb devices.
I have enabled usb debugging and im using MDB08L
ant78 said:
Hi all
I tried Wug's Nexus Root Toolkit and i keep on getting the trouble shooting message when ever i try to either unlock the bootloader or make a back up,
I have tried the other way using the sdk tool kit and using cmd prompts but it wont list my device when i enter adb devices.
I have enabled usb debugging and im using MDB08L
Click to expand...
Click to collapse
Assuming you are on Windows, Try this tool. https://www.androidfilehost.com/?fid=24052804347803384
Also, make sure you have the option to unlock OEM bootloader under developer options turned on.
chichu_9 said:
Assuming you are on Windows, Try this tool. https://www.androidfilehost.com/?fid=24052804347803384
Also, make sure you have the option to unlock OEM bootloader under developer options turned on.
Click to expand...
Click to collapse
I'm using windows 10 and I already have oem unlock ticked .
Thanks
Could be a driver issue. Check in Device Manager and make sure the device is recognized as an ADB Composite Device. Also, when you connect your phone, and do "ADB devices", make sure to touck OK on the phone screen also
PaisanNYC said:
Could be a driver issue. Check in Device Manager and make sure the device is recognized as an ADB Composite Device. Also, when you connect your phone, and do "ADB devices", make sure to touck OK on the phone screen also
Click to expand...
Click to collapse
Most likely this problem. If you don't see the option to touch OK, restart the phone and/or replug the USB cable.
PaisanNYC said:
Could be a driver issue. Check in Device Manager and make sure the device is recognized as an ADB Composite Device. Also, when you connect your phone, and do "ADB devices", make sure to touck OK on the phone screen also
Click to expand...
Click to collapse
My ADB device in Device manager has a warning sign next to it, i click and ask windows to fix this but it says "Windows was unable to install your ADB device"
I have this on my new laptop and new desktop PC, all have usb 3 connections
Just followed this guide and fingers crossed it seems ok, http://visualgdb.com/KB/usbdebug-manual/
A little history. I have rooted several other brands of tablets, so I am not new at this. Even thogh I am not a programmer by any stretch of the word. My Pixel C drivers work fine in normal mode, I can see the storage as a drive, no problem. I can transfer files back and forth. But, when I boot it into fastboot mode, it will not see it. It is listed as an unknown device in the device manager of Windows 10. I have tried to install the drivers, but they say not found. And this is the driver from the Android website. I'm at my wit's end. I'm not a newbie at windows, either. But, I need suggestions to get this to work. BTW this is the latest version of Windows 10 1903. And I have tried every solution I have found on google and on this website. TIA
Ok, fixed that by selecting a driver from a list of drivers so now I have ADB drivers. I have another issue which I will do some research on if not.....I'LL BE BACK.
What is your goal?
Do you want to use adb or fastboot?
Is the bootloader unlocked, have you enabled usb debugging in the developers menu (hidden) etc
Ok, as I said before, I figured it out. And yes, the bootloader was unlocked and yes USB debugging was enabled. I got everything
working and I am now running Android 9. Thanks for the reply, though.
Toolcrazy said:
Ok, as I said before, I figured it out. And yes, the bootloader was unlocked and yes USB debugging was enabled. I got everything
working and I am now running Android 9. Thanks for the reply, though.
Click to expand...
Click to collapse
Missed that! (you mentioned another issue)
Well done etc