Was running BPB1, and tried to decrypt my phone. It got stuck, so I did a reset, and rebooted into Safestrap. Tried to restore a backup, which seemed to go by quick (I thought it took a bit, but this was done within seconds). I FORGOT to flash teh BPB1 SS kernel....
So I got into Download mode and tried flashing the NK2 kernel. I get stuck on the Samsung Galaxy S5 Custom screen. I then tried flashing the NI2 kernel...same thing.
What the hell do I do now?
Even performed factory reset..and same thing, it won't get past the Samsung Galaxy s5 Custom Powered by Android screen.
bryank29 said:
Even performed factory reset..and same thing, it won't get past the Samsung Galaxy s5 Custom Powered by Android screen.
Click to expand...
Click to collapse
Did you try odin back the pb1 kernel ?
alin919 said:
Did you try odin back the pb1 kernel ?
Click to expand...
Click to collapse
I don't know when the TAR version of the kernel is. These are all ZIPS and one is the full tar, I think http://forum.xda-developers.com/verizon-galaxy-s5/development/vzwstock-based-tw-rom-3-4-16-t3329029
Edit - just found this: https://www.androidfilehost.com/?fid=24438995911969780 will try flashing it.
I just tried the header partiion fix here (even if it was for bok) but that didn't help either: http://forum.xda-developers.com/verizon-galaxy-s5/development/safestrap-5-0-lollipop-t3313800
Just flashed the BPB1 Kernel via Odin. Same Samsung powered by Android screen...
bryank29 said:
Just flashed the BPB1 Kernel via Odin. Same Samsung powered by Android screen...
Click to expand...
Click to collapse
Well , the only think you can do now is to odin full pb1 rom and reroot again . Sorry for the bad news !
alin919 said:
Well , the only think you can do now is to odin full pb1 rom and reroot again . Sorry for the bad news !
Click to expand...
Click to collapse
I am fine doing that if that is what it takes. I hate to ask this..because there is so many links, but could you provide the URL's to the re-root process? My head has been swimming in pages/links for the last 3 hours.
I assume I can use this PB1 download? https://www.androidfilehost.com/?fid=24438995911970571
bryank29 said:
I am fine doing that if that is what it takes. I hate to ask this..because there is so many links, but could you provide the URL's to the re-root process? My head has been swimming in pages/links for the last 3 hours.
I assume I can use this PB1 download? https://www.androidfilehost.com/?fid=24438995911970571
Click to expand...
Click to collapse
Use this one , or you can compare the one from root tred with the one you got...... here :http://forum.xda-developers.com/verizon-galaxy-s5/general/root-method-og5-ok3-t3290370
---------- Post added at 06:49 PM ---------- Previous post was at 06:48 PM ----------
bryank29 said:
I am fine doing that if that is what it takes. I hate to ask this..because there is so many links, but could you provide the URL's to the re-root process? My head has been swimming in pages/links for the last 3 hours.
I assume I can use this PB1 download? https://www.androidfilehost.com/?fid=24438995911970571
Click to expand...
Click to collapse
I think you got the wright one .
alin919 said:
Use this one , or you can compare the one from root tred with the one you got...... here :http://forum.xda-developers.com/verizon-galaxy-s5/general/root-method-og5-ok3-t3290370
---------- Post added at 06:49 PM ---------- Previous post was at 06:48 PM ----------
I think you got the wright one .
Click to expand...
Click to collapse
I previously installed the one with his PROPS file and deodexed....but if I can get back to my nandroid backup, that would solve that issue correct?
alin919 said:
Well , the only think you can do now is to odin full pb1 rom and reroot again . Sorry for the bad news !
Click to expand...
Click to collapse
So reading that rooting thread you posted..the instructions are a bit unclear. Because I am going to odin the BPB1 file, it is mentioned
If Your Not On BPB1 Build then Proceed too Prepare Your Phone ------------------------V RIGHT THERE V
Click to expand...
Click to collapse
Should I look at my situation as if I am NOT on BPB1 then, despite that I 'was'? And then it says 'proceed to rooting instructions' ....but if I install the BPB1, do I still need to unzip "OK3_ROOT_V5.exe " ?
bryank29 said:
So reading that rooting thread you posted..the instructions are a bit unclear. Because I am going to odin the BPB1 file, it is mentioned
Should I look at my situation as if I am NOT on BPB1 then, despite that I 'was'? And then it says 'proceed to rooting instructions' ....but if I install the BPB1, do I still need to unzip "OK3_ROOT_V5.exe " ?
Click to expand...
Click to collapse
Yes , just unzip on same folder on desktop . Prepare phone is about heaving a function pb1 rom before you root .
alin919 said:
Yes , just unzip on same folder on desktop . Prepare phone is about heaving a function pb1 rom before you root .
Click to expand...
Click to collapse
Got it. thanks. Will report back.
Ok so I am going for round 2. Screwed up apparently.
I followed all the steps, and even rebooted into SafeStrap. I thought, after wiping cache, data, etc.. like the instructions said prior to installing a ROM, I could just restore my backup. That process went fine, but then I went to flash the G900V_Fix+Safestrap and it said "FAILED". WTF. I've never had a fail on flashing a zip before. Said it couldn't open the file.
I wonder if part of the SD card is corrupted because it was encrypted, but I can still see my files after I told the phone to decrypt earlier. I mean I got no error flashing my August 26 nandroid...
Any clue why flashing zips would barf? I was definitely rooted and busybox and SS installed. Though after installing SS a 2nd time (per the instructions) I got a verizon notification that said unauthorized something....
Confirmed...my files on my SD card were corrupt. So formatting card, copying over the fresh backups I made before **** hit the fan, and giving this another go.
Related
hello, so, ive had the s4 (att) for a while and i have a small problem, i rooted it (and confirmed the root with rootchecker) and at some point decided to try to install a custom mod on it. issue is i am on MF3 and read of all the dangers and kinda stopped. but i stopped after attempting to get CWM on the phone using rom manager (from teh google play store) now when all this happened it was months ago and i had just started on android exploits and the dangers scared me off, i used a jailbroken and unlocked iphone before.
needless to say currently i want to get cyanogenmod on the phone. its rooted, but im not sure what to do next. ive been reading materials for about 2 days now. threads keep contradicting eachother some say use loki and odin others say you cant because its gonna brick mf3.
looking for a quick answer on what exactly i need to get a custom rom installed. the guides here are great but again most say mf3 will be bricked while others say otherwise.
also currently the phone randomly displays a "custom" boot screen right after bootup. sometime it does sometime it doesnt. im guessing from teh CWM. but not sure.
help.
vampirekid13 said:
hello, so, ive had the s4 (att) for a while and i have a small problem, i rooted it (and confirmed the root with rootchecker) and at some point decided to try to install a custom mod on it. issue is i am on MF3 and read of all the dangers and kinda stopped. but i stopped after attempting to get CWM on the phone using rom manager (from teh google play store) now when all this happened it was months ago and i had just started on android exploits and the dangers scared me off, i used a jailbroken and unlocked iphone before.
needless to say currently i want to get cyanogenmod on the phone. its rooted, but im not sure what to do next. ive been reading materials for about 2 days now. threads keep contradicting eachother some say use loki and odin others say you cant because its gonna brick mf3.
looking for a quick answer on what exactly i need to get a custom rom installed. the guides here are great but again most say mf3 will be bricked while others say otherwise.
also currently the phone randomly displays a "custom" boot screen right after bootup. sometime it does sometime it doesnt. im guessing from teh CWM. but not sure.help.
Click to expand...
Click to collapse
I read this and i'm not sure in what stage you are? What firmware you are on ( asume stock rooted MF3). Did you phone bootup all the way or not? All i can help is just start fresh from here: http://forum.xda-developers.com/showthread.php?t=2502003 if you on MF3. If you not on MDL just go to sammobile find firmware and flash with odin.
After you back to stock firmware root you phone (look for correct metod on firmware you have) install SafeStrip for MF3 or CMW for MDL ( do not install CMW if you on MF3) SafeStrip post here http://forum.xda-developers.com/showthread.php?t=2448925 and more info here :http://forum.xda-developers.com/showthread.php?t=2428254. But first of all READ, READ, READ : http://forum.xda-developers.com/showthread.php?t=2314494
norbarb said:
I read this and i'm not sure in what stage you are? What firmware you are on ( asume stock rooted MF3). Did you phone bootup all the way or not? All i can help is just start fresh from here: http://forum.xda-developers.com/showthread.php?t=2502003 if you on MF3. If you not on MDL just go to sammobile find firmware and flash with odin.
After you back to stock firmware root you phone (look for correct metod on firmware you have) install SafeStrip for MF3 or CMW for MDL ( do not install CMW if you on MF3) SafeStrip post here http://forum.xda-developers.com/showthread.php?t=2448925 and more info here :http://forum.xda-developers.com/showthread.php?t=2428254. But first of all READ, READ, READ : http://forum.xda-developers.com/showthread.php?t=2314494
Click to expand...
Click to collapse
well the short version is this
bought phone (it auto updated to mf3)
rooted phone while on mf3
installed rom manager off the play store, which installed CWM.
i uninstalled rom manager but im more than sure that CWM stayed.
currently i want to start over, hopefully flash the phone back to stock and re-root it and try again using a better method (like safestrap)
so all i have to do is get odin + mf3 pda/csc/phone/modem files and flash the phone right? then its gonna be back to stock rom. so i will have to reroot it and try again...
will this also reset the flash counter?
So from what I read, you're not in a great position. MF3 CANNOT have a custom recovery, sure you can install one like you did but it won't work. That being said what you mentioned should work, flashing MF3 via ODIN. After that, root it and install SafeStrap, it's the only option for MF3 (currently no options for the latest firmware AFAIK).
Link to Odin thread:
http://forum.xda-developers.com/showthread.php?t=2504311
read the entirety of it, it's only 5 pages long.
http://forum.xda-developers.com/showthread.php?t=2314494
Read post 2 thoroughly, it has lots of good information. IGNORE THE FIRST POST, it doesn't apply to your phone
Lastly if you don't want the phone to update itself, what I did was install Titanium backup and froze the following apps:
1. AT&T Software update Vxx_x_xxxx_x_x
2. FWUpgrade x.x.x
3. LocalFOTA vx_xxxx_x_x
as for the flash counter, I'm not sure. I hope this helps a little.
What i would suggest is to odin bak to UCUAMDL and then use casual to root back.
Then you will have TWRP recovery and can flash any rom (loki'd) , Also keep in mind never do a data format using twrp.
s4shyam95 said:
What i would suggest is to odin bak to UCUAMDL and then use casual to root back.
Then you will have TWRP recovery and can flash any rom (loki'd) , Also keep in mind never do a data format using twrp.
Click to expand...
Click to collapse
He's on mf3, how's he going to do that?
Sent from my Nexus 5 using xda app-developers app
jd1639 said:
He's on mf3, how's he going to do that?
Sent from my Nexus 5 using xda app-developers app
Click to expand...
Click to collapse
Cant one odin back to mdl from mf3 ?
s4shyam95 said:
Cant one odin back to mdl from mf3 ?
Click to expand...
Click to collapse
No, a qfuse is blown. No way to go backwards.
Sent from my Nexus 5 using xda app-developers app
s4shyam95 said:
Cant one odin back to mdl from mf3 ?
Click to expand...
Click to collapse
Even if you update to last leak (MJ6) or official (MJ9) you can not return back to MF3
---------- Post added at 02:32 PM ---------- Previous post was at 02:30 PM ----------
vampirekid13 said:
well the short version is this
bought phone (it auto updated to mf3)
rooted phone while on mf3
installed rom manager off the play store, which installed CWM.
i uninstalled rom manager but im more than sure that CWM stayed.
currently i want to start over, hopefully flash the phone back to stock and re-root it and try again using a better method (like safestrap)
so all i have to do is get odin + mf3 pda/csc/phone/modem files and flash the phone right? then its gonna be back to stock rom. so i will have to reroot it and try again...
will this also reset the flash counter?
Click to expand...
Click to collapse
Yes flash with odin back to MF3 root install triangle away if you want to reset flash counter then reset.
Good luck.
norbarb said:
Even if you update to last leak (MJ6) or official (MJ9) you can not return back to MF3
---------- Post added at 02:32 PM ---------- Previous post was at 02:30 PM ----------
Yes flash with odin back to MF3 root install triangle away if you want to reset flash counter then reset.
Good luck.
Click to expand...
Click to collapse
umm for the mf3 sgh-i337 i need odin3 v185 right?
thats what i read someplace but i forgot where.
vampirekid13 said:
umm for the mf3 sgh-i337 i need odin3 v185 right?
thats what i read someplace but i forgot where.
Click to expand...
Click to collapse
This one i post in attachment
found 【docomo】GALAXY Note Edge(SC-01G) root - RECOVERY TWRP - fireware
I already tried root and RECOVERY TWRP on my unlocked N915D and every goes OK
■ROOT
1. Download cf-auto-root-for SC-01G.zip
2. Flash it in PDA with Odin 3.07
■ the same steps on RECOVERY TWRP
■Fireware in the source I didn't try it
All files in the link attached
NOTE :
I can't post any link because I should have 10 post before I do that xda policy
I'm trying to root my edge but I can't get these files from the links. do you still have this?
Mikekan13 said:
I'm trying to root my edge but I can't get these files from the links. do you still have this?
Click to expand...
Click to collapse
yes i have it
I dream with the day that my Verizon Note Edge will get root...
This method to get root also works for the KDDI AU SCL24 Note Edge! I found the file on a vietnamese website that said it also worked for SCL24 / SM-N915J.
Confirmed working as well.
root files for edge
pg2150 said:
yes i have it
[email protected]
send me exactly you need
Click to expand...
Click to collapse
hi sir..may i ask for the files as well for Note Edge rooting..the files in the links have been deleted
kindly email it to [email protected] if it's ok..thanks
pg2150 said:
found 【docomo】GALAXY Note Edge(SC-01G) root - RECOVERY TWRP - fireware
I already tried root and RECOVERY TWRP on my unlocked N915D and every goes OK
■ROOT
1. Download cf-auto-root-for SC-01G.zip
2. Flash it in PDA with Odin 3.07
■ the same steps on RECOVERY TWRP
■Fireware in the source I didn't try it
All files in the link attached
NOTE :
I can't post any link because I should have 10 post before I do that xda policy
Click to expand...
Click to collapse
Do you mind making the files available to me as well? I need:
TWRP RECOVERY :
openrecovery-twrp-2.8.1.1-trltetmo.img.tar?dl=0
FIRmWARE :
SC01GOMU1ANJ3.zip.
Thanks.
---------- Post added at 07:28 AM ---------- Previous post was at 06:50 AM ----------
ihavenoeffort said:
This method to get root also works for the KDDI AU SCL24 Note Edge! I found the file on a vietnamese website that said it also worked for SCL24 / SM-N915J.
Confirmed working as well.
Click to expand...
Click to collapse
IHNE, can you send me that link to the site you found the files? [email protected]. Thanks.
Working Link for firmware SC-01G ?
pg2150 said:
found 【docomo】GALAXY Note Edge(SC-01G) root - RECOVERY TWRP - fireware
I already tried root and RECOVERY TWRP on my unlocked N915D and every goes OK
■ROOT
1. Download cf-auto-root-for SC-01G.zip
2. Flash it in PDA with Odin 3.07
■ the same steps on RECOVERY TWRP
■Fireware in the source I didn't try it
All files in the link attached
NOTE :
I can't post any link because I should have 10 post before I do that xda policy
Click to expand...
Click to collapse
Sorry, but could I bother you to send the linked files to [email protected]?
I would really appreciate it! Thanks for your time!
P.s. Just to clarify, this will also work for the SCL24, correct?
kokuon said:
P.s. Just to clarify, this will also work for the SCL24, correct?
Click to expand...
Click to collapse
The root method does work. I'm not sure about the recovery part though.
**edit**
I went to this website and downloaded TWRP version 2.8.5.0 and it works. As for the functionality, i'm not sure. I tried doing the backup and it was working but then the screen shut off but the back and home buttons were still lit up and the screen would not turn back on with the power button so i just pulled the battery. Also of note, there are two strips of bright blue on either side of the main UI. There was an error that said the UI could not load properly, but like i said, it was starting to backup. I'm more of a CWM kind of person so i am going to try the T-Mobile version of that and see what happens. http://techerrata.com/file/twrp2/trltetmo/openrecovery-twrp-2.8.5.0-trltetmo.img.tar
Good luck.
**edit2**
I turned off the screen timeout feature and the backup went fine. I'm going to test to see if I can restore from that backup tonight.
ihavenoeffort said:
The root method does work. I'm not sure about the recovery part though.
**edit**
I went to this website and downloaded TWRP version 2.8.5.0 and it works. As for the functionality, i'm not sure. I tried doing the backup and it was working but then the screen shut off but the back and home buttons were still lit up and the screen would not turn back on with the power button so i just pulled the battery. Also of note, there are two strips of bright blue on either side of the main UI. There was an error that said the UI could not load properly, but like i said, it was starting to backup. I'm more of a CWM kind of person so i am going to try the T-Mobile version of that and see what happens.
Good luck.
**edit2**
I turned off the screen timeout feature and the backup went fine. I'm going to test to see if I can restore from that backup tonight.
Click to expand...
Click to collapse
Thanks, I'll give it a shot. Just to make sure I'm not misunderstanding, this recovery is what will grant me root, correct? It's my first time messing with CWM so I'm a bit worried.
custy3000 said:
Thanks, I'll give it a shot. Just to make sure I'm not misunderstanding, this recovery is what will grant me root, correct? It's my first time messing with CWM so I'm a bit worried.
Click to expand...
Click to collapse
Whoa wait. First you need to follow the root method by flashing the sc-01g recovery. Boot the phone and install/update busy box and SuperSU. Then you can reflash to twrp or cwm.
custy3000 said:
Thanks, I'll give it a shot. Just to make sure I'm not misunderstanding, this recovery is what will grant me root, correct? It's my first time messing with CWM so I'm a bit worried.
Click to expand...
Click to collapse
ihavenoeffort said:
Whoa wait. First you need to follow the root method by flashing the sc-01g recovery. Boot the phone and install/update busy box and SuperSU. Then you can reflash to twrp or cwm.
Click to expand...
Click to collapse
Ah, ok I understand now. Thanks for the help!
Now if only somebody could provide me with SC01GOMU1ANJ3.zip... I'll love you long time!
custy3000 said:
Ah, ok I understand now. Thanks for the help!
Click to expand...
Click to collapse
I got it, thanks a lot!
Just remember that if you want osaifu-keitai to keep working, you will need to flash Stock Recovery.
golfinry said:
Just remember that if you want osaifu-keitai to keep working, you will need to flash Stock Recovery.
Click to expand...
Click to collapse
Do you have a link to the stock recovery to flash?
HyoImowano said:
Do you have a link to the stock recovery to flash?
Click to expand...
Click to collapse
Please see updated guide.
Thank you!
when i get into Recovery Mode it allways error "recovery seandroid enforcing".how can i fix it?:crying:
Hi, I'm stupid and bricked my phone.
I had rooted almost immediately after getting my phone, AT&T SM-G900A, and had no problems.
Used FlashFire to apply the 5.0 pre-rooted stock rom (OC4), and had no problems.
Decided today to use SuperSU's "Full Unroot" function, rebooted, and now I can't get past the AT&T logo on boot. And apparently even after that the phone is still rooted.
Tried the G900AUCU3BOC4-OneClick.exe Odin flasher, but it fails and I get "sw rev check fail [aboot]: fused 4 > binary 3" which from what I understand means I am trying to install a rom version that is older than the one I currently have.
Looked on the internet to see if there is any Odin-compatible tar.md5 file for the newer versions, hoping one of those would let me update. However, I can only find .zip files made by muniz_ri. Tried copying those to my microSD card and install through recovery, but it fails with "invalid header". It looks like those zip files only work with FlashFire, which I can't even get to anymore because I can't boot.
Is there a floating copy of one of the newer stock roms (can be unrooted, I don't care) that I can flash with Odin? Or is there another secret I am missing? I have been through dozens of threads here on the forums and they all seem to have a solution that just give me any results.
Thanks for any help!
I have the same issue, did you fix it somehow?
KhaosAnimeX said:
I have the same issue, did you fix it somehow?
Click to expand...
Click to collapse
i've the same problem... did you 2 had any luck?
This might be you solution:
http://forum.xda-developers.com/att...cu4bof3-odin-tar-files-t3246906?goto=newpost/
DanteGG said:
This might be you solution:
http://forum.xda-developers.com/att...cu4bof3-odin-tar-files-t3246906?goto=newpost/
Click to expand...
Click to collapse
i'll try it, thanks!
edit: worked!!!!!!!!!!!!!!!!! thanks
calculuschild said:
Hi, I'm stupid and bricked my phone.
I had rooted almost immediately after getting my phone, AT&T SM-G900A, and had no problems.
Used FlashFire to apply the 5.0 pre-rooted stock rom (OC4), and had no problems.
Decided today to use SuperSU's "Full Unroot" function, rebooted, and now I can't get past the AT&T logo on boot. And apparently even after that the phone is still rooted.
Tried the G900AUCU3BOC4-OneClick.exe Odin flasher, but it fails and I get "sw rev check fail [aboot]: fused 4 > binary 3" which from what I understand means I am trying to install a rom version that is older than the one I currently have.
Looked on the internet to see if there is any Odin-compatible tar.md5 file for the newer versions, hoping one of those would let me update. However, I can only find .zip files made by muniz_ri. Tried copying those to my microSD card and install through recovery, but it fails with "invalid header". It looks like those zip files only work with FlashFire, which I can't even get to anymore because I can't boot.
Is there a floating copy of one of the newer stock roms (can be unrooted, I don't care) that I can flash with Odin? Or is there another secret I am missing? I have been through dozens of threads here on the forums and they all seem to have a solution that just give me any results.
Thanks for any help!
Click to expand...
Click to collapse
Hello!
Did you fix your s5? I'm having the same issue with mine. I can't find the G900AUCU4BOF2 I'm scared to flash via odin any other old firmware.
Thanks
Sent from my SM-N910V using XDA-Developers mobile app
Download stock firmware for your device and flash it via odin.. everything will get back to normal
mumo24 said:
i'll try it, thanks!
edit: worked!!!!!!!!!!!!!!!!! thanks
Click to expand...
Click to collapse
Hello there!
Where can i get the link to the stock G900AUCU4BOF2?i noticed that you fix yours.
Thanks
---------- Post added at 02:58 PM ---------- Previous post was at 02:56 PM ----------
brave nathanael said:
Download stock firmware for your device and flash it via odin.. everything will get back to normal
Click to expand...
Click to collapse
Stock Rom for G900AUCU4BOF2 5.0 does not exist yet,just G900AUCU1ANCE 4.4.2 Im afraid to brick my phone if I downgrade.having a hard time to find it
osk4rin said:
Hello there!
Where can i get the link to the stock G900AUCU4BOF2?i noticed that you fix yours.
Thanks
---------- Post added at 02:58 PM ---------- Previous post was at 02:56 PM ----------
Stock Rom for G900AUCU4BOF2 5.0 does not exist yet,just G900AUCU1ANCE 4.4.2 Im afraid to brick my phone if I downgrade.having a hard time to find it
Click to expand...
Click to collapse
Hello, try looking for G900A_OF2_Stock_Rooted_Rom.zip I think that is the file you are looking for. In case you dont find it I could upload it.
(I guess that was the file I used, downloaded a lot of ROMs that time)
Well... I want to completely wipe my phone make it a clean slate and then install this new officially released lollipop update.
Please can you good people inform me, what is the procedure to do the same step-by-step.
PS: I guess I have to use the Philz and odin.. but can anybody tellme complete procedure. I wana completely delete cache, partitions etc etc.. that is needed.
Also, if I use this method how to upload to the phone the actual Official OS? I know it can be downloaded via sammobile but is it possible to DL from Kies and upload via odin ?
UPDATE: Well, can you please tellme how can I erase cache/dalvik cache/partition from my current stock recovery (using Lollipop 5.1.1)
Yes, download an official firmware from Samsungupdates.com or sammobile, flash it through odin and then boot into recovery and clear data and format system.
Advice
MrHollywood said:
Yes, download an official firmware from Samsungupdates.com or sammobile, flash it through odin and then boot into recovery and clear data and format system.
Click to expand...
Click to collapse
Hi. I am new here and it seems that you know a lot about this subject. A couple days ago, I went to the samsungupdates site and during the download, it tried to overtake my browser and came up with that "you have a virus, call this number....". I cleaned that malware out and now I hear that Odin is loaded with malware also? Any advice on where to download roms and Odin that are safe? Thanks in advance. Have a great day : )
Drakkor said:
Hi. I am new here and it seems that you know a lot about this subject. A couple days ago, I went to the samsungupdates site and during the download, it tried to overtake my browser and came up with that "you have a virus, call this number....". I cleaned that malware out and now I hear that Odin is loaded with malware also? Any advice on where to download roms and Odin that are safe? Thanks in advance. Have a great day : )
Click to expand...
Click to collapse
Haha yeah I do have a lot of experience with that since I downloaded many firmwares and also roms. As for that virus thing It is just an Ad, don't worry about it I have downloaded firmwares from Samsunhupdates many times. If you don't like it Go ahead with Sam mobile. Once you download the firmware things will be very simple. But remember download the firmware for the country that you are in, for an example if you are in the middle east download XSG ...etc Just download an app called Samsung info From playstore and it will tell you what your CSC code is (country code For firmware) okay. Once you download the firmware tell me, so that I can guide you step by step.
MrHollywood said:
Yes, download an official firmware from Samsungupdates.com or sammobile, flash it through odin and then boot into recovery and clear data and format system.
Click to expand...
Click to collapse
Well, I know what I have to do as u stated above, but dunno how !!
I want to download Philz and delete all cache and partition and then flash new FW via odin.... but I require step-by-step guide to perform this.....
no luck
MrHollywood said:
Haha yeah I do have a lot of experience with that since I downloaded many firmwares and also roms. As for that virus thing It is just an Ad, don't worry about it I have downloaded firmwares from Samsunhupdates many times. If you don't like it Go ahead with Sam mobile. Once you download the firmware things will be very simple. But remember download the firmware for the country that you are in, for an example if you are in the middle east download XSG ...etc Just download an app called Samsung info From playstore and it will tell you what your CSC code is (country code For firmware) okay. Once you download the firmware tell me, so that I can guide you step by step.
Click to expand...
Click to collapse
Hi again. Well, no matter where I go, They try to get me to download some other junk I do not want. I don't know why people are always trying to scam people! They send me to some file gator site, they load popups full screen. Then, it puts Yahoo as my default search engine. If I ever met the idiots that do this, I would shoot them in the head!
Drakkor said:
Hi again. Well, no matter where I go, They try to get me to download some other junk I do not want. I don't know why people are always trying to scam people! They send me to some file gator site, they load popups full screen. Then, it puts Yahoo as my default search engine. If I ever met the idiots that do this, I would shoot them in the head!
Click to expand...
Click to collapse
Okay, no worries bro give me your CSC and you want the latest lollipop firmware right? For n900 right? Give me those information and I will be happy to find you Another link, an easier one to download from.
---------- Post added at 02:01 AM ---------- Previous post was at 01:53 AM ----------
craige said:
Well, I know what I have to do as u stated above, but dunno how !!
I want to download Philz and delete all cache and partition and then flash new FW via odin.... but I require step-by-step guide to perform this.....
Click to expand...
Click to collapse
Here is a step by step guide to flash a stock firmware using odin
http://www.droidviews.com/install-stock-firmware-on-samsung-galaxy-devices-using-odin/
Once you flash the firmware, go ahead and boot into recovery, it should take you to the original recovery, not philz or cwm, the original recovery. Once you open it, go ahead and format And clear Your data along side the cache.
Ps: you will lose EVERYTHING that is on Your phone, but that's what you want right?
Goodluck!
[/COLOR]
Here is a step by step guide to flash a stock firmware using odin
http://www.droidviews.com/install-stock-firmware-on-samsung-galaxy-devices-using-odin/
Once you flash the firmware, go ahead and boot into recovery, it should take you to the original recovery, not philz or cwm, the original recovery. Once you open it, go ahead and format And clear Your data along side the cache.
Ps: you will lose EVERYTHING that is on Your phone, but that's what you want right?
Goodluck! [/QUOTE]
Mate, that was a complete ODIN guide and I thank you for that.
Now, I have to wipe cache/delvik/partition on my phone as I i have to get rid of sum weird errors and lags that only deleting this via Philz can do.
So please gimme guide/link of Philz as well OR even you can explain than i can follow procedure as you said.
Is this a spoon feed thread ?
Dejan Sathanas said:
Is this a spoon feed thread ?
Click to expand...
Click to collapse
Right from the start I just want to know how to install philz (Some say on SD card and some some other assorted ways) AND, after deleting cache/delvik/partition.... what command to give in order to flash through odin (I know how 2 use Odin).
Its simple - But then instead of answering this you are here to insult me... well, guess too much free time OR angry with your family & GF !?
craige said:
[/COLOR]
Here is a step by step guide to flash a stock firmware using odin
http://www.droidviews.com/install-stock-firmware-on-samsung-galaxy-devices-using-odin/
Once you flash the firmware, go ahead and boot into recovery, it should take you to the original recovery, not philz or cwm, the original recovery. Once you open it, go ahead and format And clear Your data along side the cache.
Ps: you will lose EVERYTHING that is on Your phone, but that's what you want right?
Goodluck!
Click to expand...
Click to collapse
Mate, that was a complete ODIN guide and I thank you for that.
Now, I have to wipe cache/delvik/partition on my phone as I i have to get rid of sum weird errors and lags that only deleting this via Philz can do.
So please gimme guide/link of Philz as well OR even you can explain than i can follow procedure as you said.[/QUOTE]
What is your phone Model? N900? N9005? Tell me so that I can find a Philz recovery for you mate.
I highly recommend twrp as philz is no longer updated and was based on cwm.
Well actually am using international Note 3 Neo (Model: SM-N750).
Now, I have researched around and landed on this page:
http://forum.xda-developers.com/showthread.php?p=39433857#post39433857
According to above my phone aint supported..... So now shall I still go ahead and use Philz ?
craige said:
Well actually am using international Note 3 Neo (Model: SM-N750).
Now, I have researched around and landed on this page:
http://forum.xda-developers.com/showthread.php?p=39433857#post39433857
According to above my phone aint supported..... So now shall I still go ahead and use Philz ?
Click to expand...
Click to collapse
you need to use ONLY and ONLY file for your phone
craige said:
Well actually am using international Note 3 Neo (Model: SM-N750).
Now, I have researched around and landed on this page:
http://forum.xda-developers.com/showthread.php?p=39433857#post39433857
According to above my phone aint supported..... So now shall I still go ahead and use Philz ?
Click to expand...
Click to collapse
Is this your phone: http://forum.xda-developers.com/showthread.php?t=2719163 ?
audit13 said:
Is this your phone: http://forum.xda-developers.com/showthread.php?t=2719163 ?
Click to expand...
Click to collapse
Yes tht is my phone - Let me browse around, search videos on how to install & use this and revert back with any questions I may be having.
PS: The official Samsung Lollipop OS tht I want can only be downloaded via sammobile? Is It guaranteed to be 1-by-1 image of the original source...
You can just use Odin to flash the stock firmware from sammobile.com. Yes, it is original and untouched.
audit13 said:
You can just use Odin to flash the stock firmware from sammobile.com. Yes, it is original and untouched.
Click to expand...
Click to collapse
Mate, my phone is facing extreme lags and slowdowns after upgrading to Lollipop via kies.
Now this thing have happened in my old Note 1 with JB as well....
All-in-All, till I don't delete cache, dalvik and partition and reflash the firmware this problem aint gona solve 100% and hence want to use anything like TWRP etc.. to wipe tht first, but I had completely forgotten how I had done last time. BTW, after deleting the said phone cache etc.. I can directly rebot my phone go to odin and flash?
PS: I am still looking how 2 install twrp and under which menu I can find all those options - Gimme sum time to figure this out.
In some instances, stock recovery will go a better job of wiping the phone.
craige said:
Well actually am using international Note 3 Neo (Model: SM-N750).
Now, I have researched around and landed on this page:
http://forum.xda-developers.com/showthread.php?p=39433857#post39433857
According to above my phone aint supported..... So now shall I still go ahead and use Philz ?
Click to expand...
Click to collapse
You realise you are in the wrong forums... right? The Neo has it's own forums at THIS Address so you should be asking your questions there. Advice in the Galaxy Note 3 forums may not work and may even brick your phone.
I couldn't find the correct thread to upload this, its a newer model of the J700P it could be from Sprint or Boostmobile either way here is the stock odin firmware i seen it in the Samsung kitchen so why not share it
This is Nougat firmware
AP_J727PVPU1AQB9_REPAIR_user_low_ship_MULTI_CERT_meta.tar.md5
BL_J727PVPU1AQB9_REPAIR_user_low_ship_MULTI_CERT.tar.md5
CP_J727PVPU1AQB9_REPAIR_user_low_ship_MULTI_CERT.tar.md5
CSC_SPT_J727PSPT1AQB9_REPAIR_user_low_ship_MULTI_CERT.tar.md5
https://www.androidfilehost.com/?fid=745425885120715469
Note:
This is either for Sprint or Boostmobile
Has anyone used this???
Sent from my SM-J727P using XDA-Developers Legacy app
JeepinxJosh said:
Has anyone used this???
Sent from my SM-J727P using XDA-Developers Legacy app
Click to expand...
Click to collapse
yes, quite afew times
will this work for Virgin mobile as well? I haven 't had a need yet...but knowing meeee...eventually.
Worked for my VM version of the phone. I think the phone sets itself from the network(Sprint, Boost, Virgin) when you activate it.
Very well ,Confirmed Works on boost mobile only method. helps me get off or bypass screen massage Blocked by FRP ,flashed with Odin thanks
Thank you very much! Also for the confirmation it works..... (i did hit the thanks button)
Downloading now,....... Just got this device due to a insurance claim so this is a completelt new phone to me and I really want to either start or add to one specific form till we get a complete spot on the fourms.... Any way my ideal or a good ideal for us is to add everthing that is confirmed working as on today and add it to one fourm and reserve like 10 entrys for specific problems and the solutions. Or just in a easy format so everything is not so confusing till we get our device a Fourm started instead of a thread thats confusing and hard to follow.... Anyone with me???? Its a new device and we need development so bad.. im stuck in a bootloop as of now and cant find the info to help me and its so aggervating.... someone will have to maintain it of course
---------- Post added at 09:01 PM ---------- Previous post was at 08:33 PM ----------
quick question...... downloaded the stock firmware but not sure about something....
do I add every file to odin or just the AP file??? or what? cause im use to just flashing in the AP spot in odin. Do I just load the AP REPAIR file i downloaded in the zip file? or do I add all files to odin??? Im alil confused.... PLEASE AND THANK YOU FOR THE HELP
just never really had to flash any other files but the AP slot....
Easy instruction would be very helpfull please
UPDATE UPDATE
I just went ahead and added all dled files in the folder to Odin and everythings good! Thanks again
FLASH ALL FILES
still getting error
XxTeXx07xX said:
Thank you very much! Also for the confirmation it works..... (i did hit the thanks button)
Downloading now,....... Just got this device due to a insurance claim so this is a completelt new phone to me and I really want to either start or add to one specific form till we get a complete spot on the fourms.... Any way my ideal or a good ideal for us is to add everthing that is confirmed working as on today and add it to one fourm and reserve like 10 entrys for specific problems and the solutions. Or just in a easy format so everything is not so confusing till we get our device a Fourm started instead of a thread thats confusing and hard to follow.... Anyone with me???? Its a new device and we need development so bad.. im stuck in a bootloop as of now and cant find the info to help me and its so aggervating.... someone will have to maintain it of course
---------- Post added at 09:01 PM ---------- Previous post was at 08:33 PM ----------
quick question...... downloaded the stock firmware but not sure about something....
do I add every file to odin or just the AP file??? or what? cause im use to just flashing in the AP spot in odin. Do I just load the AP REPAIR file i downloaded in the zip file? or do I add all files to odin??? Im alil confused.... PLEASE AND THANK YOU FOR THE HELP
just never really had to flash any other files but the AP slot....
Easy instruction would be very helpfull please
UPDATE UPDATE
I just went ahead and added all dled files in the folder to Odin and everythings good! Thanks again
FLASH ALL FILES
Click to expand...
Click to collapse
OK, so i flashed all 4 files in odin with my Boost mobile samsung galaxy SM-J727P and im still getting an error...im stuck in boot loop as well.someone please help. thanks
Does anyone knows if it's possible to unlock it with Z3X?
The extra csc file or the other so file named home-ap
AtlasTheGod said:
OK, so i flashed all 4 files in odin with my Boost mobile samsung galaxy SM-J727P and im still getting an error...im stuck in boot loop as well.someone please help. thanks
Click to expand...
Click to collapse
Flash the home ap file I believe instead....
You see the file?
UPDATE UPDATE
I just went ahead and added all dled files in the folder to Odin and everythings good! Thanks again
FLASH ALL FILES
I have followed all steps. I am using the J727p for boost. It turned on loaded up normally for me then when I restarted the phone it is now stuck in a boot load it gets to the Samsung screen then shuts off and repeats.
XxTeXx07xX said:
Flash the home ap file I believe instead....
You see the file?
UPDATE UPDATE
I just went ahead and added all dled files in the folder to Odin and everythings good! Thanks again
FLASH ALL FILES
Click to expand...
Click to collapse
What build were you on when flashed it ???
If you were on J727PVPU2AQI3 YOUR STUCK TILL YOU GET THE NEW FIRMWARE FILE !!
JUSMEJOSE said:
I couldn't find the correct thread to upload this, its a newer model of the J700P it could be from Sprint or Boostmobile either way here is the stock odin firmware i seen it in the Samsung kitchen so why not share it
This is Nougat firmware
AP_J727PVPU1AQB9_REPAIR_user_low_ship_MULTI_CERT_meta.tar.md5
BL_J727PVPU1AQB9_REPAIR_user_low_ship_MULTI_CERT.tar.md5
CP_J727PVPU1AQB9_REPAIR_user_low_ship_MULTI_CERT.tar.md5
CSC_SPT_J727PSPT1AQB9_REPAIR_user_low_ship_MULTI_CERT.tar.md5
https://www.androidfilehost.com/?fid=745425885120715469
Note:
This is either for Sprint or Boostmobile
Click to expand...
Click to collapse
this fixed my blinking:
rpmb provisioned ...pink
rpmb fuse: 1 ...yellow
recovery booting ...blue
This does not work. I've tried it multiple times on multiple versions of Odin. This will not work if you use Boost Mobile. It either fails, hangs at flashing boot.img, or hangs at SetupConnection.
Galaxy J727P
spc_hicks09 said:
This does not work. I've tried it multiple times on multiple versions of Odin. This will not work if you use Boost Mobile. It either fails, hangs at flashing boot.img, or hangs at SetupConnection.
Click to expand...
Click to collapse
Here try these four file ! Don't use the fifth file if your not on Sprint it not needed in most cases !
https://www.androidfilehost.com/?w=files&flid=244089
peter couniaz said:
Here try these four file ! Don't use the fifth file if your not on Sprint it not needed in most cases !
https://www.androidfilehost.com/?w=files&flid=244089
Click to expand...
Click to collapse
Thank you, I will try them now and see what happens.
XxTeXx07xX said:
Flash the home ap file I believe instead....
You see the file?
UPDATE UPDATE
I just went ahead and added all dled files in the folder to Odin and everythings good! Thanks again
FLASH ALL FILES
Click to expand...
Click to collapse
Anyone have any luck with these? I'd really like to bypass frp on this
spc_hicks09 said:
Thank you, I will try them now and see what happens.
Click to expand...
Click to collapse
So do you have any luck? trying to get stock firmware on my device to bypass FRP boot.img error
Almost bricked...and then this post saved my friggin day!
peter couniaz said:
Here try these four file ! Don't use the fifth file if your not on Sprint it not needed in most cases !
This works to get you back to stock from bootloop. I tried my hand at rooting this little SOB (TWRP,Magisk) and tripped the Knox counter bc I forgot to wipe it. Reboot came up with "Validation Failure" and I was stuck. I stumbled over this post and with nothing to lose other than $130.
First piece of advice...Use Odin 3.12.3 ONLY!! I tried the latest version and it didn't work. Download the files, place them in the appropriate boxes and flash. reboot into recovery, wipe the cache/data and you should be good. Mine took quite a while after hanging on the Boost mobile splash screen, but about 3 reboots later, it brought me to the configuration screen. It's up, running and I even got the OTA software update, but then again, it is stock.
Click to expand...
Click to collapse
J727P
ListlessSpectre said:
peter couniaz said:
Here try these four file ! Don't use the fifth file if your not on Sprint it not needed in most cases !
This works to get you back to stock from bootloop. I tried my hand at rooting this little SOB (TWRP,Magisk) and tripped the Knox counter bc I forgot to wipe it. Reboot came up with "Validation Failure" and I was stuck. I stumbled over this post and with nothing to lose other than $130.
First piece of advice...Use Odin 3.12.3 ONLY!! I tried the latest version and it didn't work. Download the files, place them in the appropriate boxes and flash. reboot into recovery, wipe the cache/data and you should be good. Mine took quite a while after hanging on the Boost mobile splash screen, but about 3 reboots later, it brought me to the configuration screen. It's up, running and I even got the OTA software update, but then again, it is stock.
Click to expand...
Click to collapse
You may want to look at this link if you haven't already the last Rom there is my daily drive but you should read threw it let me know if you need any help !
https://forum.xda-developers.com/galaxy-j7/development/updated-tweaked-deodexed-rom-galaxy-t3773219
Click to expand...
Click to collapse