Hello!
EDIT: I've done more tinkering and need to update this question/post.
A couple super noob-questions...
-Does anyone know the default governor settings for the Nexus 10? Using 3c System Tuner I see I can adjust the governor and screen-off governor. In these adjustments there is a 'no change' setting. If I just put it back to that and reboot am I back to the original governor settings, or does it remain changed to the last selection I had?
UPDATE: Looks like the default is 'interactive', could anyone confirm that?
-Again I'll be using 3c System Tuner. I have not adjusted any of the SysCtrl settings. Does anyone know the stock SysCtrl for the Nexus 10, or how I would 'reset to default'?
UPDATE: I worked on adjusting them which then reveals a functional 'Reset' which I assume is back to the devices defaults, could anyone confirm that?
Thanks XDA!!
bigmatty said:
Hello!
EDIT: I've done more tinkering and need to update this question/post.
A couple super noob-questions...
-Does anyone know the default governor settings for the Nexus 10? Using 3c System Tuner I see I can adjust the governor and screen-off governor. In these adjustments there is a 'no change' setting. If I just put it back to that and reboot am I back to the original governor settings, or does it remain changed to the last selection I had?
UPDATE: Looks like the default is 'interactive', could anyone confirm that?
-Again I'll be using 3c System Tuner. I have not adjusted any of the SysCtrl settings. Does anyone know the stock SysCtrl for the Nexus 10, or how I would 'reset to default'?
UPDATE: I worked on adjusting them which then reveals a functional 'Reset' which I assume is back to the devices defaults, could anyone confirm that?
Thanks XDA!!
Click to expand...
Click to collapse
Stock is Ondemand, and Sysctl.conf doesn't exist on the stock OTA so you can delete the file.
brees75 said:
Stock is Ondemand, and Sysctl.conf doesn't exist on the stock OTA so you can delete the file.
Click to expand...
Click to collapse
Thank you!
So actually it looks like the only choices shown are 'userspace' , 'interactive' , and 'performance'. Interactive seems to be the default.
I cranked it up to Performance and it does not seem to drain the battery much more at all. UI feels "zippy" now It did not feel slow at all before, but seems tubo now.
bigmatty said:
So actually it looks like the only choices shown are 'userspace' , 'interactive' , and 'performance'. Interactive seems to be the default.
I cranked it up to Performance and it does not seem to drain the battery much more at all. UI feels "zippy" now It did not feel slow at all before, but seems tubo now.
Click to expand...
Click to collapse
I wouldn't leave it on Performance that means it will be at 1700Mhz the whole time, it WILL eat your battery.
Check this thread out http://forum.xda-developers.com/showthread.php?t=1369817
One very effective tweak for the Interactive governor is to lower the figure for "go_hispead_load", it will be set to 90 or 95 by default and lowering it to 85 or 80 will improve responsiveness.
edit
You will need Trickster mod to do this, it's available at Play store.
Hello and welcome! So I started this because I hated having to have a different app to change some of the kernel settings and having init.d scripts for each kernel was a hassle to me, plus some users were having trouble with so many options available so I created this for all those who like to flash & test different kernels like me. I would like to dedicate this project of mine to my friend @ak for all the help and patience he has, he truly is a great dev and we owe him for some of the best kernels available for the Nexus 4.
So how this works is on every boot the script verifies all the tunables it finds specific for the kernel you have at the moment and generates the necessary files so it can be read & displayed on Synapse. Don't feel bad if you don't see all the listed options, it's just your kernel doesn't have those available.
In time I will be adding more scripts so we can have most, if not ALL tunables I can cram into. Hope you like it!
Screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So what you need:
-Root (obviously)
-Working Busybox
-Your ROM has to support init.d scripts
-Synapse
Click to expand...
Click to collapse
Download Links:
BusyBox
Universal Kernel Manager v3.8.1
Synapse Google Play Link
UKM Uninstaller v2
To install:
-Reboot in recovery
-Flash the .zip (No cache/dalvik wipe necessary)
-Install Synapse
-You're done!
Click to expand...
Click to collapse
Features:
Info
General
Model Number
Android Version
Kernel Version
ROM Description
ROM Version
ROM Build Date
SOC Binning
Last KMSG
Status
Battery Temperature
CPU Temperature
Memory
Uptime
Unused CPU States
Time in state for CPUs
Kernel Wakelocks
CPU
Live CPU Frequency
CPU Min Frequency
CPU Max Frequency
CPU Max Screen Off Frequency
CPU Multicore Power Saving
CPU Governor
CPU Governor Options
CPU Governor Tunables
Hotplug
MPDecision (Qualcomm)
Intelliplug (faux123)
ECO Mode
Snakecharmer
Intellithermal
MSM MPDecision (show-p1984)
Screen off Single Core
Min CPUs
Max CPUs
Idle Frequency
Event Boost
MSM Hotplug (myfluxi)
Min CPUs
Max CPUs
Max CPUs Boosted
Boost Lock Duration
Down Lock Duration
History Size
Update Rate
Fast Lane Load
Offline Load
Suspend Frequency
Auto Hotplug (Thalamus)
Disable Load Threshold
Enable Load Threshold
Enable All Load Threshold
Min Sampling Rate
Sampling Periods
Min Online CPUs
Max Online CPUs
Dynamic Hotplug (stratosk)
Minimum Online CPU
Maximum Online CPU
Up Threshold
Up Timer Control
Down Timer Control
Alucard Hotplug (Alucard)
Hotplug Enable
Sampling Rate
Max Cores Limit
Max Cores Limit Sleep
CPU Down Rate
CPU Up Rate
Hotplug Loads
Hotplug RQs
Hotplug Frequencies
Mako Hotplug (franciscofranco)
Cores on touch
First Level
Suspend Frequency
CPU Boost Driver
Boost
Sync Threshold
Input Boost ms
Input Boost Frequency
CPU Voltage
Global Voltage
Frequency Voltage
AK
Faux
Semaphore
I/O Control
Read-ahead Size
I/O Scheduler
General I/O Tunables
I/O Scheduler Tunables
GPU
Live GPU Frequency
GPU Max Frequency
GPU Governor
Simple Governor Tunables
Interactive Governor Tunables
Gamma
Faux Gamma Profiles
Faux Gamma Tunables
Franco Gamma Tunables
Motley Gamma Tunables
LCD Backlight Tunables
Sound
Faux Sound Profiles
Faux Sound Tunables
Franco Sound Tunables
Speaker
Faux Speaker Profiles
Faux Speaker Tunables
Memory
Z-RAM
Virtual Memory
Wake Control
Apply at init.d
DoubleTap2Wake
Touch Wake
Sweep2Wake
Sweep2Sleep
Power Key Suspend
Miscellaneous
TCP Congestion Control
Temperature Control
Temperature Limit Minimum Frequency
Power Suspend State
FSYNC
Dynamic FSYNC
Vibrator Strength
USB Fast Charge
OTG
Battery Life Extender
Touchscreen Accuracy Filter
LED Control
Advanced
C-States
Kernel Samepage Merging (KSM)
Ultra Kernel Samepage Merging (UKSM)
Gentle Fair Sleepers
Low Memory Killer
Build.Prop
Wifi Scan Interval
VM Heapsize
Allow Purgeable Assets
DNS Tweaks
Tools
Toggle Bootloader Lockstate
Toggle Bootloader Tamper Flag
Toggle SELinux Status
Preferred Network Mode
Kernel Image Managment (Backup, Restore)
Log Creation (logcat, dmesg, last_ksmg)
Reboot
Profiles
Changelog:
UKM v3.8.1
Lowered min CPU voltages
Fixed missing hotplug tunables
Fixed sqlite version mismatch
UKM v3.8
New Devices (Additional LG G3 variants, Samsung Galaxy S4, Samsung Galaxy S5)
Additional 10 rows for frequencies in time in state
Added msm_hsic_host wakelock tunable
Added new kcal tunables from savoca.
Improved preferred_network mode.
Fixed compatibility with certain devices.
Fixed permissions issue when flashing.
Minor bug fixes.
UKM v3.7
New UKM backup script.
New Devices (Moto G 2014, Samsung Galaxy S3, Sony Xperia Z Ultra).
Added new Wake toggles.
Added Simple GPU parameters for other devices.
Added Force Audit toggle in tools.
Added live Fauxsound version.
Added Software CRC Control toggle.
Added kcal_invert gamma toggle.
Moved Headphone PA Value to device files.
Fixed blu_plug display error.
Fixed device write error in several files.
UKM V3.6.1
Added back old CPU Boost Input Freq
Fixed drop caches null value
UKM v3.6
New Devices (Motorola Droid Ultra, Moto X 2013, Sony Xperia Z2).
Added initial support for Nexus 6 (shamu).
Alternate way of detecting device on startup.
New Config module for import/export of settings.
Support for gamma action in new Config module.
New Galaxy Nexus settings for gamma.
Moved MSM Limiter & CPU Boost to CPU tab.
New MSM Limiter tunables (individual CPU control).
New CPU Boost tunables (individual CPU control).
New Power-efficient Workqueues tunables.
Added Bricked Hotplug tunables.
Added LMK profiles.
Set permissions for UKM files on startup.
Additional permissions for UKM files on startup.
Increased Fauxsound max limit settings.
Changed vibrator titles in misc tab.
Added vibrator strength for wake controls.
Additional gamma profile for Nexus 5.
Added additional voltage control for Galaxy Nexus.
Fixed Kernel logger & Bootloader tunable.
Fixed empty value in global voltage.
Fixed error in GPU frequency list.
Fixed GPU Governor in hammerhead.
Fixed display error on device hostname.
Fixed Idle Freq error in Bricked Hotplug.
Fixed Sound Control for devices without Poweramp.
UKM v3.5
Fixed Sound Control Lock for certain devices.
Fixed write error when restoring gamma profiles.
Added Live Installation Check.
Added ability to change IO settings for all blocks.
Added tunable for dmesg kernel logging.
New Intelliplug hotplug tunables.
New MSM Hotplug tunables.
New & Fixed Alucard hotplug tunables.
New CPU Boost hotplug tunables.
New Intellithermal tunables.
New tunables to change individual CPU settings (Kernel Dependent).
New Gamma settings for Galaxy Nexus.
New vibrator settings for Galaxy Nexus.
Added check to see if GPU settings are present.
Code optimization in config.json.generate file.
New Devices! (Sony Xperia Z1, LG G3, HTC One M8, Moto G 2013, Moto G 4G 2013, Galaxy Nexus).
v3.4.3
Disabled DNS Tweaks for now
Excluded weights from IO Scheduler tunables
Added auto clear data when kernel changed detected (to prevent boot errors)
Additional permissions for init.d in recovery
Auto set permissions for LMK file on Android L
Updated SOC path, New Deferred Timer for KSM
Added Gamma control for OnePlus One
New tunables for updated ZRAM
Added sound control lock to Fauxsound
Moved thermal settings, New MSM MPDecision Hotplug tunables
New thermal section (New Intellithermal settings, New MSM Thermal settings)
Support for new devices (LG G2, HTC M7, Sony XPeria Z, Sony Xperia ZL)
Minor bug fixes
Fixed Intellithermal path
v3.3.2
Lowered CPU voltage step
Increased max sleep for KSM & UKSM
Added Optimize Databases tool
Added Drop Caches tunable (Clear VFS Caches)
Added Vibrator support for OPO
Added support for devices with auto PowerAmp
Added additional gamma profiles for N5
New Blu_Plug hotplug & updated AutoSMP tunables
Added support for LG Optimus G, LG G Pad 8.3 & Nexus 7 2012
Fixed derp on action for powersaver_mode (Blu_plug)
Fixed echo write error when setting CPU frequencies
Fixed derp on wildcard for gee variants
v3.2
Fixed Intelliplug 5.0 tunable errors
Fixed GPU voltages with uV values
Disabled toggle switch between s2s/s2d
Fixed write error invalid argument display message
Apply value of 1 to kcal_ctrl if it exists
Added back s2s, removed unnecessary notifiers
Added High Performance Mode sound tunable
Added descriptions for Memory & Advanced options
New Laptop Mode (Auto FS Writeback Delay Mode) tunable
v3.1
Fixed default headphone_pa_gain for Nexus 5.
Fixed voltage write error for certain kernels.
Fixed wake write error when applying profile.
Added support for OnePlus One device (bacon).
Added default screen for non-supported devices.
Added kcal (independent) & kcal_min tunables.
Added additional wake toggles (DoubleTap2Wake profiles, DoubleTap2Wake Feather, Sweep2Wake profiles, OPO touchpanel).
Added tool to Clear Synapse Data internally.
New AutoSMP, MSM Limiter & Intelliplug 5.0 hotplug tunables.
Minor bug fixes.
v3.0
New USB Fast Charge & BLX for N7
Added additional wake settings
Load default mako config if device not supported
Fixed device parameters for OnePlus One
Set new device specific parameters for GPU & Bin
Create dynamic device parameters for Bin Settings
Create dynamic device parameters for GPU Settings
Support for kernels with basic speaker settings
Fixed Franco hotplug, New AutoSMP hotplug
Fixed incorrect device detection for fauxsound
Fixed creation of Logs folder only when needed
Minor bug fixes
v2.9
Added new gamma profiles
Fixed headphone gain for Nexus 5
Fixed gamma profiles for Nexus 5
Fixed incorrect product device for Oneplus One
Misc bug fixes
v2.8
Fixed more config.json errors for Nexus 5
Added Default Custom Profiles (to avoid reset)
Added better permissions for init.d wake toggles
More Code optimization
Added support for Oneplus One (let's go @ak)
v2.7.2
Add new hotplug, misc & advanced tunables (thanks to @ak)
Few bug fixes
v2.7
Attempt to fix gamma invalid argument error
Several bug fixes
General code optimization
Added additional log mode
Added Power Suspend Mode
Added New Intelliplug tunables
v2.6
Fixed invalid argument error
Fixed config.json generate with duplicate GPU freq
Fixed several tunable parameters
Additional mount parameters for wake options
Merged CPU Gov tab with CPU tab
Added CPU Global Volt file to save values
v2.5
Fixed JSON configuration parsing failed for certain kernels.
Fixed Fast Charge Level & Touchscreen Accuracy.
Fixed init.d permissions & owner for Wake toggles.
Fixed N5 Power Key Suspend tunable.
Fixed Preferred Network Mode & Added Log Mode in tools.
Added N5 Franco Gamma Profiles, Fixed Permissions in gamma files.
Added Device Hostname & Wireless Port in build.prop.
Modified notifiers for better performance.
New Intelliplug Tunables.
New MSM Hotplug Tunables.
New MSM MPDecision Tunables.
Disabled CPU Frequency Display (for now).
v2.4
Fixed Wake Notifier bug.
Added Temp Threshold, New Faux Fast Charge.
Added GPU Min Freq.
Ability to set CPU settings for all Cores.
Increased CPU Frequency Poll (download the latest Synapse!).
Added Custom Gamma Profiles (Faux & Franco).
Added MSM Hotplug Load Levels, Fixed Fast Lane Load values.
v2.3
Integrated sqlite3
Fixed Interactive GPU (for good this time)
Added New Semaphore Tunables
Added Franco Hotplug Tunables
Added ability to apply wake options at init.d
Added UKSM Tunables
Added LED Control Tunables
v2.2
Fixed TWRP flash error
Fixed GPU Settings for supported devices
Fixed certain Hotplug settings not displaying
Fixed Live Wakelocks for devices without file
Added Interactive GPU tunables
Added Preferred Network Mode
v2.1
Lowered CPU & GPU refresh rate to display correct CPU & GPU frequency (tested with perfmon)
Fixed Restore Profiles (now checks .tgz first)
Fixed default CPU & GPU values in device config
Fixed incorrect devices parameters in live action
Added Power Suspend State (N5)
Fixed Franco Gamma, Added Franco Sound Tunables
v2.0
No longer N4 exclusive.
Re-coded entire script to support other devices (N4, N5 & N7 for now).
All commands are now called from internal busybox.
Optimized code (faster & less CPU usage).
Added Kernel Image Management (Backup, Restore & Delete).
Added Live Kernel Wakelocks.
v1.7
Integrated busybox for better support
Better way to fix permissions in CPU Frequencies
Fixed Faux Gamma Custom Profiles Link
Fixed Uptime, Unused, Time in State, CPU Freq & Bootloader displays
Fixed Bootloader Lock State. Added Tamper Flag & SELinux Toggles
Added Alucard & CPU Boost Hotplug
Added Allow Purgeable Assets (build.prop)
v1.6
Fix Conservative GPU governor error
Attempt to fix permissions in CPU Frequencies before opening app
Fixed MSM Hotplug display for HellsCore & HellsDoctor users
Added ability to name your backup in Profile
Added Semaphore Hotplug Tunables
Added New Tools Section (Bootloader Lock Status, Log Creation, etc.)
Added Franco Gamma Tunables, New Faux Gamma Profiles
Added Semaphore CPU Voltage Tunables
Added TouchScreen Accuracy Filter Tunables
v1.5
Better UCI support on certain ROMS
Fixed default CPU scaling & New CPU multicore tunable
Fixed display issue in live unused & time in states
More build.prop tweaks, New DNS tweaks
More MSM Hotplug & New Auto Hotplug Tunables
Added LCD Backlight
Added Temperature Limit Minimum Frequency
v1.4
Fixed permission issues in files
Added Fahrenheit Temps, CPU time in state
Added build.prop tweaks
Added Intellithermal Settings
Fixed ondemand sampling_rate_min error
v.1.3
Fixed interactive boostpulse error
Added Global CPU Offset Voltages
Added Faux Sound Settings
Added Live Status
v1.2
Added Faux Gamma Profiles & Tunables
Added Faux Speaker Profiles & Tunables
v.1.1
Fixed CPU live label
Added Profile Settings (For backup & restore)
v1.0
Initial Release
Click to expand...
Click to collapse
Thanks:
@ak - for his help in getting this started.
@AndreiLux - for his awesome app Synapse.
@osm0sis - for his ideas on the Galaxy Nexus.
@eng.stk - for his help on the support for Nexus 5.
GitHub is Here:
UKM
Any suggestions, bugs or others settings you need just let me know.
Code:
Please rate the thread and don't forget the THANKS button below! :D
Supported devices:
Nexus 4
Nexus 5
Nexus 6
Nexus 7 (2012 & 2013)
Galaxy Nexus
OnePlus One
LG G2
LG G3
LG G Pad 8.3
LG Optimus G
HTC M7
HTC One M8
Moto Droid Ultra
Moto G 2013
Moto G 4G 2013
Moto G 2014
Moto X 2013
Samsung Galaxy S3
Samsung Galaxy S4
Samsung Galaxy S5
Sony XPeria Z
Sony Xperia ZL
Sony Xperia Z1
Sony Xperia Z2
Sony Xperia Z Ultra
Click to expand...
Click to collapse
Tested kernels:
Should work on any kernel, but my personal tested kernels & confirmed by other users are the following:
Nexus 4:
AK
Faux
Matr1x
HellsCore
HellsDoctor
Semaphore
moob
dimfish
Aufa
Zulfa
Furnace
Nexus 5:
Code Blue
Uber
ElementalX
Nexus 7:
AK
OnePlus One:
AK
Click to expand...
Click to collapse
F.A.Q.
No UCI support detected? Check the following:
a) Does your ROM support init.d scripts?, IF it doesn't try this,
b) Check in /system/xbin if the uci file exists. IF it doesn't exists you can try reflashing the .zip or run the following in terminal emulator:
su
ln -s /data/N4UKM/uci /system/xbin/uci
Click to expand...
Click to collapse
c) Check the permissions of /system/xbin/uci AND /data/N4UKM/uci, it should be 755 or 777. IF it isn't you can try reflashing the .zip or run the following in terminal emulator:
su
chmod 755 /system/xbin/uci
chmod 755 /data/N4UKM/uci
Click to expand...
Click to collapse
d) Check the config.json file in /data/N4UKM/, if the file is blank you can try generating the file again with the following in terminal emulator:
su
uci reset
uci
Click to expand...
Click to collapse
IF NONE OF THE ABOVE WORKED FOR YOU send me a screenshot of your terminal emulator running the following command to determine your issue:
su
uci reset
uci
Click to expand...
Click to collapse
Some steps to fix most common issues when coming from another kernel and UKM is still installed: (thanks to gorillap)
Step 1 - go to settings>Apps>Synapse - force close - Clear data - ReOpen Synapse
If this doesn't work
Step2 - go to settings>Apps>Synapse - force close - Clear data - Uninstall Synapse. Reinstall Synapse in play store
If this doesn't work
Step3 - go to settings>Apps>Synapse - force close - Clear data - Uninstall Synapse. Delete Synapse folder. Reboot to recovery. Reflash kernel, Reflash UKM. Install Synapse
If this doesn't work, request support in thread.
To use UKM on Lollipop just do this: (Thanks to thereal_bigjake)
1) Flash Permissive boot.img (thanks to ramjet73).
2) Install SELinux Mode Changer and set to permissive.
3) Install Synapse and flash UKM v3.5 or higher (you need busybox installed also)
4) Run a terminal after boot and type su, then type \system\etc\init.d\UKM
5) Enter Synapse and profit.
To restore a profile: (Thanks to apb_axel)
1) Save the profile to the /sdcard/Synapse/saved_profiles folder.
2) Open Synapse, go to profiles tab and press the Restart Synapse button (to make to profile appear).
3) Open Synapse, go to profiles tab and select the profile, click the √ and select Restore Selected Profile.
4) At this moment Synapse will close automatically so give it a few seconds and it will open automatically again.
5) When it opens, click the X button on top, not the √.
6) Done.
Restrictions on config files: (thanks to apb_axel)
1) You can't import settings that don't exist on your current kernel (this is fairly obvious so no explanation needed).
2) Some settings that are not imported/exported for privacy concerns are: buildprop net.hostname, buildprop service.adb.tcp.port.
3) You can't import/export the SELinux status, either Enforcing or Permissive (I've read that some people had issues when restoring profiles that were based on a KitKat ROM and when it was restored on a Lollipop ROM it broke their root, they had to reinstall everything from scratch so I prefer to avoid this at all costs).
4) You can't import/export the Preferred Network Mode (again some people have complained that restoring a profile where their carries have different settings had their phone stopped working).
5) You can't import/export voltage settings (Not every CPU is build the same, so to avoid device shutdown do to low voltages this is disabled).
6) You can't import/export sound settings (This is more of a personal setting and doesn't affect battery/performance).
7) You can't import/export speaker settings (This is more of a personal setting and doesn't affect battery/performance).
8) You can't import/export gamma settings (This is more of a personal setting and doesn't affect battery/performance).
Want to integrate UKM into your ROM?: (thanks to kecinzer)
http://forum.xda-developers.com/showpost.php?p=58054064&postcount=2409
I cannot get cpu settings to show... Btw awsome work hpe to see it get even better
Edit: oops i am on stock rom so i cannot use this, realised just now ... Is there any way to add init.d support to stock ROM?
Sent from my Nexus 4 using Tapatalk
chewu.pg said:
I cannot get cpu settings to show... Btw awsome work hpe to see it get even better
Edit: oops i am on stock rom so i cannot use this, realised just now ... Is there any way to add init.d support to stock ROM?
Sent from my Nexus 4 using Tapatalk
Click to expand...
Click to collapse
There is an app that can help you get init.d support to stock ROM, try it out and let me know if it works: http://forum.xda-developers.com/showthread.php?t=1933849
The .zip works fine on PSXv4.0.4 & ak Exodus 227
Enviado desde mi Nexus 4 mediante Tapatalk
Good work.
Glad to see that you took full advantage of the capabilities of the app. Also very happy to see that you took advantage of the notifiers for the global voltage slider in exactly the way that I intended them, although that I would have done the behaviour a bit different, but that's a choice of preference.
Let me know on Github on any wishes/comments/feedback.
Ideally in the future I was planning to do a sister-app which does a configuration-injection much like you do, but for global device compatibility, and self-contained. Sadly it's a lot of work and needs to be maintained, hope I can do it by this summer. Goal is to basically annihilate other apps such as Trickster and all other custom kernel configs apps.
apb_axel said:
There is an app that can help you get init.d support to stock ROM, try it out and let me know if it works: http://forum.xda-developers.com/showthread.php?t=1933849
Click to expand...
Click to collapse
Worked!! Thank you so much, its so awsome and first thing i did after, is uninstall trickster... still need to keep fauxclock for color presets but i hope it will come to this app the time passes... Also noticed that synapse boot failed toast massage, so will try restarting few times to see if set on boot works
Sent from my Nexus 4 using Tapatalk
AndreiLux said:
Good work.
Glad to see that you took full advantage of the capabilities of the app. Also very happy to see that you took advantage of the notifiers for the global voltage slider in exactly the way that I intended them, although that I would have done the behaviour a bit different, but that's a choice of preference.
Let me know on Github on any wishes/comments/feedback.
Ideally in the future I was planning to do a sister-app which does a configuration-injection much like you do, but for global device compatibility, and self-contained. Sadly it's a lot of work and needs to be maintained, hope I can do it by this summer. Goal is to basically annihilate other apps such as Trickster and all other custom kernel configs apps.
Click to expand...
Click to collapse
Thanks for the kind words! That sister-app sounds awesome if you need anything just let me know.
chewu.pg said:
Worked!! Thank you so much, its so awsome and first thing i did after, is uninstall trickster... still need to keep fauxclock for color presets but i hope it will come to this app the time passes... Also noticed that synapse boot failed toast massage, so will try restarting few times to see if set on boot works
Sent from my Nexus 4 using Tapatalk
Click to expand...
Click to collapse
I'm glad it worked for you. That synapse boot failed happens mainly the first time you boot up, it should go away on another reboot and let it set the auto settings or just apply any settings to dismiss it.
Now I see Backup & restore page is lose for me
Ultraspeedy n⁴ powered by PSX v4.0.4 & AK EXODUS v227
Kaotiko77 said:
Now I see Backup & restore page is lose for me
Ultraspeedy n⁴ powered by PSX v4.0.4 & AK EXODUS v227
Click to expand...
Click to collapse
To backup & restore profiles? I'll add it to my to-list.
apb_axel said:
To backup & restore profiles? I'll add it to my to-list.
Click to expand...
Click to collapse
Thanks and very good and hard job
Ultraspeedy n⁴ powered by PSX v4.0.4 & AK EXODUS v227
Tried it, and it works! Thanks for this app! (FYI: I had to reboot 2x to get it working.)
EotT said:
Tried it, and it works! Thanks for this app! (FYI: I had to reboot 2x to get it working.)
Click to expand...
Click to collapse
Yeah it happened to me once in my testing, couldn't reproduce it so i though it was a fluke. I'll take another look just in case.
It's not really a problem. At first, I was a bit disappointed, because I thought it didn't work. I'm glad I was mistaken.
Damn geart job man! Cannot wait for volume settings. Then I can get rid of trickstermod and have 1 app instead.
Konstantinos said:
Damn geart job man! Cannot wait for volume settings. Then I can get rid of trickstermod and have 1 app instead.
Click to expand...
Click to collapse
Yeah sound settings are coming! First I will release gamma then definitely sound.
apb_axel said:
Yeah sound settings are coming! First I will release gamma then definitely sound.
Click to expand...
Click to collapse
Thanks! You rock.
On a side note, on "ROM Description"(First tab) it says PARANOID3, but I use PARANOID4.(PA 4.3 Beta 1) Who cares about this, but I'm just saying.
Hi @apb_axel, thanks for your work
I have a little issue after flashing your script. Core 0 stays at high speed ( 1.5 Ghz ) and doesn't fall to lower frequency ( 162 in my case ), even if hotplug is enabled. I'm using Ondemand with the latest AK kernel.
EDIT : After a while I had this, see the screenshot.
Konstantinos said:
Thanks! You rock.
On a side note, on "ROM Description"(First tab) it says PARANOID3, but I use PARANOID4.(PA 4.3 Beta 1) Who cares about this, but I'm just saying.
Click to expand...
Click to collapse
The folks of paranoid android probably didn't update the build.prop file in the ROM, run this in terminal emulator and see what you get:
Code:
su
getprop ro.build.host
hello friends, today i want to share this GENIUS script+app, created by @apb_axel, with everybody in the Z section.
NOTE: THIS IS NOT MY WORK, ALL CREDIT'S GOES TO @apb_axel
So how this works is on every boot the script verifies all the tunables it finds specific for the kernel you have at the moment and generates the necessary files so it can be read & displayed on Synapse. Don't feel bad if you don't see all the listed options, it's just your kernel doesn't have those available.
Click to expand...
Click to collapse
So, what you need:
-Root (obviously)
-Working Busybox
-Your ROM has to support init.d scripts
-Synapse
Click to expand...
Click to collapse
Download links:
BusyBox
Universal Kernel Manager v3.6.1
Synapse Google Play link
UKM Uninstaller
To install:
-Reboot in recovery
-Flash the .zip (No cache/dalvik wipe necessary)
-Install Synapse
-You're done!
Click to expand...
Click to collapse
Features: (warning: big list)
Info
General
Model Number
Android Version
Kernel Version
ROM Description
ROM Version
ROM Build Date
SOC Binning
Last KMSG
Status
Battery Temperature
CPU Temperature
Memory
Uptime
Unused CPU States
Time in state for CPUs
Kernel Wakelocks
CPU
Live CPU Frequency
CPU Min Frequency
CPU Max Frequency
CPU Max Screen Off Frequency
CPU Multicore Power Saving
CPU Governor
CPU Governor Options
CPU Governor Tunables
Hotplug
MPDecision (Qualcomm)
Intelliplug (faux123)
ECO Mode
Snakecharmer
Intellithermal
MSM MPDecision (show-p1984)
Screen off Single Core
Min CPUs
Max CPUs
Idle Frequency
Event Boost
MSM Hotplug (myfluxi)
Min CPUs
Max CPUs
Max CPUs Boosted
Boost Lock Duration
Down Lock Duration
History Size
Update Rate
Fast Lane Load
Offline Load
Suspend Frequency
Auto Hotplug (Thalamus)
Disable Load Threshold
Enable Load Threshold
Enable All Load Threshold
Min Sampling Rate
Sampling Periods
Min Online CPUs
Max Online CPUs
Dynamic Hotplug (stratosk)
Minimum Online CPU
Maximum Online CPU
Up Threshold
Up Timer Control
Down Timer Control
Alucard Hotplug (Alucard)
Hotplug Enable
Sampling Rate
Max Cores Limit
Max Cores Limit Sleep
CPU Down Rate
CPU Up Rate
Hotplug Loads
Hotplug RQs
Hotplug Frequencies
Mako Hotplug (franciscofranco)
Cores on touch
First Level
Suspend Frequency
CPU Boost Driver
Boost
Sync Threshold
Input Boost ms
Input Boost Frequency
CPU Voltage
Global Voltage
Frequency Voltage
AK
Faux
Semaphore
I/O Control
Read-ahead Size
I/O Scheduler
General I/O Tunables
I/O Scheduler Tunables
GPU
Live GPU Frequency
GPU Max Frequency
GPU Governor
Simple Governor Tunables
Interactive Governor Tunables
Gamma
Faux Gamma Profiles
Faux Gamma Tunables
Franco Gamma Tunables
Motley Gamma Tunables
LCD Backlight Tunables
Sound
Faux Sound Profiles
Faux Sound Tunables
Franco Sound Tunables
Speaker
Faux Speaker Profiles
Faux Speaker Tunables
Memory
Z-RAM
Virtual Memory
Wake Control
Apply at init.d
DoubleTap2Wake
Touch Wake
Sweep2Wake
Sweep2Sleep
Power Key Suspend
Miscellaneous
TCP Congestion Control
Temperature Control
Temperature Limit Minimum Frequency
Power Suspend State
FSYNC
Dynamic FSYNC
Vibrator Strength
USB Fast Charge
OTG
Battery Life Extender
Touchscreen Accuracy Filter
LED Control
Advanced
C-States
Kernel Samepage Merging (KSM)
Ultra Kernel Samepage Merging (UKSM)
Gentle Fair Sleepers
Low Memory Killer
Build.Prop
Wifi Scan Interval
VM Heapsize
Allow Purgeable Assets
DNS Tweaks
Tools
Toggle Bootloader Lockstate
Toggle Bootloader Tamper Flag
Toggle SELinux Status
Preferred Network Mode
Kernel Image Managment (Backup, Restore)
Log Creation (logcat, dmesg, last_ksmg)
Reboot
Profiles
That's a huge list, isnt it?
And there's a quite huge list of supported device's too!
For more information's, changelog's, eventual bug reports, FAQ's, screenshot's, and to hit @apb_axel's THANKS BUTTON:
check the original thread over HERE
This thread is just for sharing, this is NOT my work. QUESTION'S or BUG REPORTS wil NOT be answered, as i am only a happy user of @apb_axel's script+app
Have a nice day and check his thread if u like to cheers!
Thanks Bro
Vishalkris said:
Thanks Bro
Click to expand...
Click to collapse
Is it working with 5.0 ?
streetu said:
Is it working with 5.0 ?
Click to expand...
Click to collapse
Not on all ROMs just few for xperia Z
Work fine existenz 3.5.5