HELP PLZ - Galaxy Note 3 Q&A, Help & Troubleshooting

My phone dont charging at all with any charger
i removed the battery and plug in it again
try different kernels
flash stock rom
but any change
in odin phone connect and work for every flash and dont disconnect.
when phone is on is not working at all
when i power off the phone and connect a picture of battery shown but it go and come again and dont work
some one help me

Damaged USB port or connections .
Or dead battery .

Related

Executive dead after update??

Can the experts explain this one or sugest a solution???tryed to flash the new rom on to my beloved xda......the rom was the latest "1933.18533_Thingonaspring.ROM.v3.2" but when running the flash the strange messaged showed up......error flashing rom...from there onwards the device is not recognised on my pc...Have tried in my laptop with the same result....any clues???
many thanks.....
long live buzzzzzz
Try to uninstall the ActiveSync, restart PC and reinstall ActiveSync again.
On your Uni, go to bootloader, will display Serial, plug in USB Cable, will display USB. Run NOID flash program to reflash your Uni.
If still can recogniced your Uni, pls try to change other USB port or other PC (Win XP).
I think I have nice paper weight
Have tryed to get the uni in boot mode but it shoes balck screen with no boot mode at all.have also tryed on my laptop but as soon as I plug it in it say device not recognised..I did try to recover from a bad flash but with no luck..
Cant think of any more solutions.........
Go to the HTC offical site and download an offical rom for Universal.Go to bootloader and get connected to your PC,no matter it is recogized or not,run the exe file you just downloaded,it will flash the rom in your device.When upgrading finished,power on ,and you may flash any rom you like to your device now.
It might useful to get a fully charged battery and to try going into bootloader mode, if that fails, then you your best bet have to send it back to your vendor to get it repaired
thats the problem.....
thats the problem...cant get the uni in bootmode....I do press light+power+reset and the screen is dead....tryed to charge the baterie just in case but the light on the uni starts to blink red and thats it.......I'm getting the impression that the uni became a paperweigth......sadly.....
I think should empty the battery, try to charge your battery over 12 hrs or borrow other people battery to test can go in to bootloader mode or not ?
If can go, try to check the USB Connection at your Activesync and than to flash, or try to uncheck the USB Connection at your Activesync and than flash.
My Uni also same like this problem before, my laptop got 2 USB port. 1st port i try the above mention, still cant recognized my Uni. So i try 2nd port, and Uni was recognized.
done it all....no joy
have done all that sugested but still no joy..I think that during the room flashing a power supply problem on the pc caused this....could it be that the uni became a paper weigh due to the room flashing ???If there was a power supply problem.....Is there anyway to recover the uni from a bad room flashing???

need advice !!!!

Alftef rom upgrade my device can't enter in bootloader just red light when plugged on charger or usb data cable. Any help ? plz
Did you fully charge before flashing? You could try leaving plugged in to charge for a while and then try entering bootloader. Otherwise I have found flashing does seem to show up bad (or old) batteries and you may want to try another battery.
Have a read on my signature link.
Good luck,

[Q] Defy not working after usb connected to a usb power problem pc

i had to connect defy to one of my friends pc to charge my defy. wen i connect it a usb power issue pop up message came on pc, and defy restart itself. I suddenly remove usb from pc. But my defy not starting. Its loaded with WajkUI 2.4.20.
And wen i start defy, its showing the boot animation and screen turns off before get into the locked phone screen. So i wipe cache and dalvik cache(which i only know), i could get into the locked screen, but its not responding and screen went off after some seconds...
What do i do now?
ur friend pc not have motorola usb driver!
and ur phone not charged.
ur battery so low.
u must charge with charger ( no PC ).
jalal-jap said:
ur friend pc not have motorola usb driver!
and ur phone not charged.
ur battery so low.
u must charge with charger ( no PC ).
Click to expand...
Click to collapse
i know how to charge my mobile dude... it was an emergency... mobile charge was low... why do i need usb driver to charge defy with usb via pc...?
if u cant help pls dont troll me...
somebody out here might know the solution.... pls do assist me... thanks...
suppose he is not trolling you ;-), just trying to help
So have you charged your battery and tried again?
corrinti said:
suppose he is not trolling you ;-), just trying to help
So have you charged your battery and tried again?
Click to expand...
Click to collapse
tried with charged battery, but the locked phone screen appears and is not responding...
can i flash it again or just do a data wipe?
cant do above two cuz i havent done any backup.... can i take backup anyway? i just need contacts....
Yes, u can make a backup in CWM.
If the backup is build, flash a clean OS and restore the contacts with Appextractor or RomToolBox or whatever.
did a data wipe and now working fine... thanks...

[Q] How to return to stock recovery and rom without USB

Hi guys,
Im actually using samsung galaxy s GT-9001 and have recently ran into a serious problem. actually two
Problem 1 : Usb cable malfuction
Im unable to connect my phone to pc, windows reports unrecognised device (was able before, tried few PC, cables) , furthermore im unable to charge my device unless i remove the battery, connect the charger then put the battery back up. Also noticed if i just put the charger on turned off device it boots instantly (skiping the option to charged as turned off), it does charge over USB, but does not recognise it.
Problem 2 : How to return to stock recovery and rom without USB
In regards to my problem number 1 , i have decided to give a shot at warranty, unfortunately cannot get rid of my CWM and custom ROM without ODIN. Any ideas how i could go back to stock rom + stock recovery without USB cable?
ps: Only created this thread as my last resort, after countless hours of browsing and testing. Please help
furthermore im unable to charge my device unless i remove the battery, connect the charger then put the battery back up. [/QUOTE]
Have you tried cleaning the contacts on battery and phone?
MogiMogi said:
Problem 2 : How to return to stock recovery and rom without USB
Click to expand...
Click to collapse
You can try Mobile Odin and also these to resolve connection problems

Unknown Problems With Y Duos

I Never Had This Problem/Bug BeFore...
After Connecting Usb The Phone Keeps Charging ..But When I Disconnect The Usb,Stil The Phone Keeps Showing As If It Is Charging and Also There Is USB icon In Statusbar..After Rebooting Phone The USB icons disappear..
And Some Times I Have Reverse Of That...After Connecting USB it doesnt Shows Up Any Icons Nor It take Charge....After I Reboot The Phone It Becomes Ok....
I M sick of This Rebooting..Phone
Tryd Flashing Stock Rom -DDL4..Stil Its There..
Help
Himan Boro said:
I Never Had This Problem/Bug BeFore...
After Connecting Usb The Phone Keeps Charging ..But When I Disconnect The Usb,Stil The Phone Keeps Showing As If It Is Charging and Also There Is USB icon In Statusbar..After Rebooting Phone The USB icons disappear..
And Some Times I Have Reverse Of That...After Connecting USB it doesnt Shows Up Any Icons Nor It take Charge....After I Reboot The Phone It Becomes Ok....
I M sick of This Rebooting..Phone
Tryd Flashing Stock Rom -DDL4..Stil Its There..
Help
Click to expand...
Click to collapse
Maybe theres problem on ur data cable..
GalKill said:
Maybe theres problem on ur data cable..
Click to expand...
Click to collapse
IDK..I dont think so its data cable problm....may b phone has bcum Bad ...
flash newest firmware with pit,it should help.
Cleare Dalvik Cache
Cache
Didnt work?
get a stock build prop (or just look for a code contains usb u will understand it)
Didnt work?
Factory reset
Didnt work?
Reflash Kernel and rom
Didnt work ? LOL
Change Usb port if didnt help change the cable if this too wont help change usb socket
if the phone says its still charging once you remove the usb cable the most common cause iv seen is dirt in the phones usb socket - clean it out with an object - you can also use cleaning solution but make sure the battery is removed and the socket is fully dry before you attempt to turn it back on
marcussmith2626 said:
if the phone says its still charging once you remove the usb cable the most common cause iv seen is dirt in the phones usb socket - clean it out with an object - you can also use cleaning solution but make sure the battery is removed and the socket is fully dry before you attempt to turn it back on
Click to expand...
Click to collapse
yap...thats the problem..ok i wil Try

Categories

Resources