Huawei P8 Lite update problem - P8lite Q&A, Help & Troubleshooting

Hello,
yesterday i tried updating my new phone as it was recommended. Unfortunately somehow it failed, so i thought i will update it later, later on i tried updating it once more and i have no idea but it turned off/restarted and the only thing i see now is the logo and nothing else happens, it stays this way, it doesnt turn on.

kotlex said:
Hello,
yesterday i tried updating my new phone as it was recommended. Unfortunately somehow it failed, so i thought i will update it later, later on i tried updating it once more and i have no idea but it turned off/restarted and the only thing i see now is the logo and nothing else happens, it stays this way, it doesnt turn on.
Click to expand...
Click to collapse
Maybe you need to unlock the bootloader. I am not sure. Also check if you are downloading correct file.

Suleiman01 said:
Maybe you need to unlock the bootloader. I am not sure. Also check if you are downloading correct file.
Click to expand...
Click to collapse
I guess he is trying to update via OTA. But anyway getting the bootloader unlocked should have no effect on OTA
Sent from my ALE-L21 using XDA-Developers mobile app

Same problem here too... After OTA phone is in bootloop.
Is it possible to unlock the bootloader when the phone is in bootloop and you can't boot properly into Android?
I've read somewhere that you need read the IMEI codes in order to send them to Huawei to get the unlock code... Now when phone is in bootloop - how do I find out what the IMEI codes are?
And one more thing I am curious about - will it wipe the data when unlocking bootloader?
I recall this happening on Nexus 4 device. That would be bad as I need to recover the data from phone somehow... Now it's in bootloop with bootloader locked... This what you could call a bad luck

Related

HELP! Stuck on Setup Wizard P9 Lite (VNS-L31)

hey guys,
i think i made something really stupid.
-unlocked bootloader
-installed TWRP
-rooted
everthing was fine B161.
installed apps2sd and did something there so my phone was stuck in bootloop.
now the stupid part:
i wiped everything in TWRP... system, internal storage everything... i am such a douchebag!
I tried to recover with eRecovery and install stock firmware B161. Update process was successful and i can start my phone again.
but everytime i start the setup wizard i am stuck after wi-fi+ service (enhanced internet expierence) the screen shows "checking data.." for 1 second and switched back to wi-fi+ service.
is there anything i can do? guys help me please i am starting to freak out.
is my guarantee voided after i unlocked my phone?
fastboot shows
-phone locked
-frp locked
THANKS FOR ANY HELP!
khajiit said:
hey guys,
i think i made something really stupid.
-unlocked bootloader
-installed TWRP
-rooted
everthing was fine B161.
installed apps2sd and did something there so my phone was stuck in bootloop.
now the stupid part:
i wiped everything in TWRP... system, internal storage everything... i am such a douchebag!
I tried to recover with eRecovery and install stock firmware B161. Update process was successful and i can start my phone again.
but everytime i start the setup wizard i am stuck after wi-fi+ service (enhanced internet expierence) the screen shows "checking data.." for 1 second and switched back to wi-fi+ service.
is there anything i can do? guys help me please i am starting to freak out.
is my guarantee voided after i unlocked my phone?
fastboot shows
-phone locked
-frp locked
THANKS FOR ANY HELP!
Click to expand...
Click to collapse
did you do factory reset? I had some weird stuff going on after recovery, so I booted back to factory reset (vol + and power), after that it worked OK.
Once you requested the bootloader unlock key, your warranty might be void from that point (depends on country). The bootloader gets locked after flashing official firmware via eRecovery though.
yes i did a factory reset, still can't proceed after wi-fi+ configuration.
is there anything else i can do?
I have one question: is it possible with
-frp locked
and
-phone locked
to downgrade via eRecovery? (to b130 or something..)
I have the exact same problem.
I bought it 3 days ago, and suddenly yesterday downloaded Apps (from the Play Store) stopped working. So someone told me to hard reset it. I got into EMUI and did it. Then I rebooted it and now it stuck there. Can't complete the setup wizard.
I found no solution to my problem after reading google & xda-forum for 3 days. Tried everything... nothing worked. Sent it back and (luckily) got a new one. Now i'm more careful for sure.
The store I bought it from claimed that they had numerous similar complaints about the 3gb version. Which is the one I have. They told me I should take it back and that they will give me a new 2gb version along with any difference in money. We will see.
Exact same thing with me stuck at setup wizard so had to send it off for warranty and got a brand new phone yesterday
Sent from my HUAWEI VNS-L31 using XDA-Developers mobile app
Help please my Huawei P9 cannot proceed afta WiFi setting it is stuck on "Checking info "and Reply saying "Couldn't sign in"
The problem is Android System Webview, it's not a system app in this rom and when you reset your phone it deletes it, happened the same to me, I had to go to a huawei center, they menaged to skip the initial setup and I've installed the apk from apk mirror. Without this app the phone can't login in your google account, so if you don't install it your gapps won't work
Maxai94 said:
The problem is Android System Webview, it's not a system app in this rom and when you reset your phone it deletes it, happened the same to me, I had to go to a huawei center, they menaged to skip the initial setup and I've installed the apk from apk mirror. Without this app the phone can't login in your google account, so if you don't install it your gapps won't work
Click to expand...
Click to collapse
Hello,
does ist really work? Is it just installing the androidsystemview.apk and the phone works fine again?
huawei p9 lite bricked ...please i need a help
my phone stoped in fastboot...
phone locked
frp lock
i can´t enter on recovery mode and he not pass the huawei icon ...
please i need help
i do not connect phone to pc ....
contact me to solve the problem
I'm having exact problem with my mate 8 NXT-L09, after i had to factory reset when update from firmware finder failed. Anyway to bypass this problem? Do you have a way of add Android System View into the mate 8 during the bootup process. I love this mate 8 phone and 5 days now i has been torture.
logjam said:
I'm having exact problem with my mate 8 NXT-L09, after i had to factory reset when update from firmware finder failed. Anyway to bypass this problem? Do you have a way of add Android System View into the mate 8 during the bootup process. I love this mate 8 phone and 5 days now i has been torture.
Click to expand...
Click to collapse
Reflash the rom you were on using the "dload" method
dariomrk said:
Reflash the rom you were on using the "dload" method
Click to expand...
Click to collapse
Sorry, dont have the previous ROM, I boiught it off someone and they probably did the first update. The factory reset should reset to huawei original but i think this is where my problem sits.
HARDWARE VERSION=NEXT_L09_VN2
BOOTLOADER VERSION=NXT-C900B120_FASTBOOT
KERNEL VERSION=NXT-C900BB140_BOOT
AP VERSION=NXT-C900B140_SYSTEM
CP VERSION=21.750.08.00.010(balong)
Parameter Version:
P-00.00.000 G-17.V271.371 E-40.01.000
does anyone have an international rom for this or any version that can work.
The way i was able to factory reset was
1. going to huawei site. "consumerDOThuaweiDOTcomSLASHjmSLASHsupportSLASHdownloadsSLASHindexDOThtm"
change slash to / and dots to .
2. Select options for your phone, mine was NXT-L09. Will show "HUAWEI Mate 8 Firmware(NXT-L09, Android 6.0, EMUI 4.0, C605B100, Latin America, Channel-Others)"
3. Download, extract onto sdcard in dload folder, restart phone using vol up & vol down & power.
4. phone will complete boot restart but will then loop the boot process.
5. Do factory reset again
6. After huawei logo, different options show and you are then ok to proceed to login to your google account and setup refreshed phone.
Now on NXT-L09C900B100 build, if anyone has nougat rom for this, please share.
For future reference, if anyone gets stuck with this on P9 lite, indeed the instructions provided by Huawei point to VNS-L11C432B161, which doesn't include Android webview and therefore initial setup cannot proceed. The solution is to flash B210 on top of B161:
update.hicloud.com:8180/TDS/data/files/p3/s15/G1164/g104/v80562/f1/full/update.zip
which allows you to pass setup as the bug has been fixed. No root/unlock/twrp required.

Bootloader unlocked screen - cant remove - Huawei UK repair centre help?

Hi all,
i soft bricked my phone and now cant get the bootloader unlocked warning message gone as there doesn't seem to be a way of locking again !
tried so many different things, upgrade, downgrade etc
i was wondering if Huawei repair centres would help me , im based in the UK? OEM info im not sure of either if its correct as certain apps display a test keys info. and currently on "stock" b161 rom
anyone have any idea ?
Fastboot? Can you enter fastboot?
pospi69 said:
Fastboot? Can you enter fastboot?
Click to expand...
Click to collapse
Yup! i ran HCU today and somehow got rid of the bootloader unlocked message on boot! hurrah.
however i have an update pending to B371 in the update option in settings but it fails every time. i think this means my phone is missing OEM info ?
originalsauce said:
Yup! i ran HCU today and somehow got rid of the bootloader unlocked message on boot! hurrah.
however i have an update pending to B371 in the update option in settings but it fails every time. i think this means my phone is missing OEM info ?
Click to expand...
Click to collapse
Downgraden to marshmallowscreen and then do the upgrade again. I had a problem with the settings force Vlissingen and downgrading and upgrading again solved the problem. Only catch is that it also does a factory reset.

Recovery bricked after Nougat update?

First excuse me for opening an other thread like this, i think i have read all other threats regarding my problem, but none have the same situation
My Huawei M3 Wifi (BTV-W09) seems semi bricked after installation of Nougat Update.
The Installation (Force Install with dload) gave me an error and also while boot i got the error message: "Your device has failed verification and may not work properly."
I have the option to press "Powerbutton" and the device will boot up. I checked the Version and it showed android 7 + EMUI 5. The only problem was that almost every system app was missing, like keyboard, calendar etc. (playstore was there)
So i tried to do the rollback with:
HUAWEI MediaPad M3 8 Rollback Package%28BTV-W09 %2CC900B300%2C EMUI5.0%2BAndroid7.0 rollback to EMUI4.1%2BAndroid 6.0%29
The Installtion (force update) gets stuck at 5% and after like 3-5 minutes the tablet will boot up showing the same boot error that can be skipped with pressing powerbutton. I checked sytem and it still showed "android 7 + EMUI 5" but built : BTV-W09C900B300
I think this is the one i "need" to be able to install the "HUAWEI MediaPad M3 8 Firmware %28BTV-W09 %2CC100B006%2C EMUI4.1%2BAndroid 6.0%29"
Problem is regardless which "update.app" i try to force install will get stuck at 5% and give me same error. I have ADB/Fastboot installed and tried some different things like flashing/unbricking it with "Huawei Multitool" where you can extract like boot.img or recovery.img and try to flash it.
Also getting an error. I can access eRecovery witout problems, the option to fix it by itself by wifi doesn`t work. I can´t access "normal" recovery and i think there is the problem (may got bricked while flashing Nougat?) I think its recovery problem, cause when i boot it up to the "half-installed" Android and go into setting "hard-reset" option i know it would boot up intoi recovery and would erease everything, while bootup it shows error "reset failed".
In fastbootmode i see bootloader: unlocked FRM: unlocked
I tried to install TWRP recovery with adb but get error: adb remote command not allowed
I downloaded like 15 different Android Versions 6+7 Emui 4.1+5 to try with force update but none worked, may i have to flash special version of recovery first?
I just want a normal version of android 6 or 7 i dont mind but at the moment with half working 7 "without" systemapps its a hardtime.
I hope someone can help me.
This isnt my first android device and im not a total noob i unlocked bootloader and flashed kernels on many other phones but with the W-09 where i did nothing special i dont get why "recovery got broken"
Thanks in advance
You haven't read other threads too well: more times people reported that the bootloader got locked after an update still declaring itself unlocked!
Second thing you have not found: the Nougat update consist of 2 packages and the second must be installed from TWRP.
nicolap8 said:
You haven't read other threads too well: more times people reported that the bootloader got locked after an update still declaring itself unlocked!
Second thing you have not found: the Nougat update consist of 2 packages and the second must be installed from TWRP.
Click to expand...
Click to collapse
thanks for your anwser, i read that so i also tried unlocking it "again" and it quotet it is also unlocked in adb. I also know that there are 2 packages. That you need TWRP i didnt know thanks so i am a bit smater now. I think i ll try "relock" and unlock it again might be the right way, thanks for the tip.
kivi90 said:
I think i ll try "relock" and unlock it again might be the right way, thanks for the tip.
Click to expand...
Click to collapse
This is nonsense. Unlock, install the right TWRP then install the second zip package.
nicolap8 said:
This is nonsense. Unlock, install the right TWRP then install the second zip package.
Click to expand...
Click to collapse
i cant unlock cause i dont have the code, on the huawei page i try do make an account and get the code by providing the necessary information.
I just uploaded a picture, i choose "before EMUI5" cause this is the only option i can choose "tablets". --> i choose "tablet wifi" , enter product model "BTV-W09" then the serialnumber i can see in setting: 28D6R17316XXXXXX but then i have the problem to input product id, it say i can get it through "Dialer" app (which i dont have in wifi model ) or the calculator. Problem is in my damaged installation there is no huawei calc, other calcs from store dont work (read that problem in other threats) I tried many apps from appstore to get a product ID but huawei site keeps saying wrong product ID =/
With the program DC Unlocker i am able to see a MEID i dont know if its the right one, i tried my luck with the Product ID Generator from Huawei but it doenst work. (device not supported)
It's very strange that it says bootloader unlocked if you have never unlocked...
And was very stupid to try to installl a beta release without before unlocking and taking a backup.
Exhange your device for a Nokia 3110!
nicolap8 said:
It's very strange that it says bootloader unlocked if you have never unlocked...
And was very stupid to try to installl a beta release without before unlocking and taking a backup.
Exhange your device for a Nokia 3110!
Click to expand...
Click to collapse
yeah at this device i never touched bootloader, i didnt think it would become such a big deal , i didnt want unlocked bootloader or other recovery just newest android. Never had any problems with the "force update function" to come back to stock. I tried DC Unlocker but cant get further cause device need to get into manufature mode (thorugh dialer or calculator which i both dont have) i hope maybe i find one more way.
Did you ever find a fix
Did you ever find a way to fix this. I'm in the same situation. I even did a VPN on my router to give me a Hong Kong address for erecovery and that still didn't work. I have the exact same product. Like you I tried to various attempts to download a new recovery, but nothing works. Nice hardware, but some of the worst software/firmware I have ever dealt with since starting with the first release of Android on the HTC Hero.
kivi90 said:
yeah at this device i never touched bootloader, i didnt think it would become such a big deal , i didnt want unlocked bootloader or other recovery just newest android. Never had any problems with the "force update function" to come back to stock. I tried DC Unlocker but cant get further cause device need to get into manufature mode (thorugh dialer or calculator which i both dont have) i hope maybe i find one more way.
Click to expand...
Click to collapse
I had mostly the same problem. I rolled back to 4.1 using the rollback and the actual 4.1 update.app. I think that puts you on C100 if I remember right. Tablet I have is C128 (USA) but no problem for this step. Get the Product ID from the calculator. Allow OEM unlock in the settings, then unlock it using the unlock code. Email yourself the unlock code because who knows if their website will even be functional next time. Alternatively you can extract the stock calculator from the update_data_usa.zip or whatever and try to use DC with 5.0. That second update zip does not install properly via the dload method, so a bunch of stock apps don't get installed. You can kind of hack it and flash it via TWRP but I didn't do it that way.
Or...you can use firmware finder to force an OTA from 4.1 right up to 5.0 (350), then take that last partial OTA to 351 after as well. The way to do that is via DNS in firmware finder. Find the Full OTA in firmware finder you want, send it to the updater by changing your DNS the way it tells you to, and when it does the OTA, everything will be properly installed basically the official way. Good as new. Flash TWRP to recovery2 and replace the erecovery. Keep the stock recovery as is. Install magisk. Golden.
---------- Post added at 03:36 AM ---------- Previous post was at 03:26 AM ----------
kivi90 said:
So i tried to do the rollback with:
HUAWEI MediaPad M3 8 Rollback Package%28BTV-W09 %2CC900B300%2C EMUI5.0%2BAndroid7.0 rollback to EMUI4.1%2BAndroid 6.0%29
The Installtion (force update) gets stuck at 5% and after like 3-5 minutes the tablet will boot up showing the same boot error that can be skipped with pressing powerbutton. I checked sytem and it still showed "android 7 + EMUI 5" but built : BTV-W09C900B300
I think this is the one i "need" to be able to install the "HUAWEI MediaPad M3 8 Firmware %28BTV-W09 %2CC100B006%2C EMUI4.1%2BAndroid 6.0%29"
Problem is regardless which "update.app" i try to force install will get stuck at 5% and give me same error.
Click to expand...
Click to collapse
Also, as far as the rollback, you need to do the first one (the C900 which is just a compatibility fix to allow rollback, previously used by beta testers I believe). Then you need to do the second one, the C100. If it is getting stuck, try downloading it again and be sure you don't have anything else in the /dload directory on either internal or the sd card. I had one on both at one point so maybe that happened to you. The C900 should be very quick but the C100 will slowly progress after 5% all the way around in several minutes.
When you get to updating back to 5.0, you can choose whichever region you want as long as it is a full OTA. C128 is USA and that's what I bought so that's what I picked. That gets you back in the right OTA update channel after that.
Hi guys,
I started as a novice and have learnt the hard way.
Has anyone tried rollback to EMUI 4.1 EU version on a US device (W09) and are there any problems I should be aware of?
I have had the exact same problem shared in this thread and have gone through the pain of finding a solution. My last resort is to rollback to 4.1 and restart the whole process.
@deV14nt: you suggested that when updating back to EMUI 5.0, I can choose the region even if my EMUI4.1 is EU version. How does this work?
Thanks in advance for your help.

DANGEROUS UPDATE : C432B185; do not apply

Hello,
I just applied the latest update C432B185 on a 8 pro honor; it remains blocked at restart. Another user reports an identical problem on the FRANDROID site.
Do not apply this update because the problem is blocking; you will no longer be able to use your honor 8 pro.
Solution on hold.
Thank you
I have the exact same problem. I started the update, and put it back in my pocket. I grabbed my phone after a few minutes and blindly touched the fingerprint sensor and pressed where normally the home button is. Instead, I catched a glimpse of a black screen, a triangle and a button. The button was at almost the same spot as where the home button normally is, so I clicked it and my phone restarted. After that, the only thing my phone does right now is show the white Honor logo with a lightblue blackground.
I already tried everything that can be done, I think.
Restarted the phone 20 times, did a 'user reset', cleared the cache 20 times and did a lot of factory resets (sometimes stuck at 99%).
Nothing made my phone work again. I also tried to use eRecovery to 'Download latest version and recovery' but that only resulted in 'Getting package info failed'.
If someone has any clue to what can be done to revive the Honor 8 Pro again (or to see some kind of logs to view what's going on), please... help! :crying:
The topic on Frandroid that Pascal was talking about: forum.frandroid.com/topic/261525-mise-%C3%A0-jour-qui-plante-le-smartphone
Hello,
I have exactly the same problem with my honor 8 pro.
I can't use it anymore, the user reset is staying 99%
If someone has a solution...
Also had the update, tried everything, wanted to flash other rom but i haven't got my product ID to unlock the bootloader.
Worst part of all, there is no care centre in The Netherlands...
so what im suppose to do? not sure at all, eRecovery fails,
using the dload method fails.
nothing seem to work atm...
Thank you for sharing this. It's not released in India yet seems but disabled the auto download update over wifi feature just in case.
Also, I can't connect to the phone with ADB or fastboot. /adb reboot recovery returns error: device unauthorized. This adb server's $ADB_VENDOR_KEYS is not set and ./fastboot getvar all returns FAILED (remote: Command not allowed). HiSuite (never tried before) can't find my phone on OSX and crashes after 5 minutes.
No root, no unlocked bootloader. Also shows FRP is locked.
Same here (france) Factory reset doesn't work, dload method doesn't either and the WIFI update doesn't find anything so I'm stuck with no phone for the moment :'(
Same here (Poland). Phone is bricked, second visit in service within 2 months :/
Oh ,god, i was about to let people know that a new update b185 had just come up until i see this post...I immediatly stopped the downloading process of this Update, so bad news for the ones who already applied the update and who got stuck now...
There might be an ultimate solution for bricked phone by using the DC Phoenix unlock software method...
Same Problem with the Honor 8Pro update
Hi,
Same problem in the Netherlands, Brabant.
Just downloaded the update for the Honor 8Pro.
Tried everything, also the eRecovery, Same problem with the package Failure.
Also E-mailed to HiHonor for an sollution, nothing so far.
Somebody got any tip? Can miss my phone for work..
Greeting from Oss, The Netherlands.
Same problem
Same problem here in The Netherlands. Literally nothing works. Never even rooted this device or anything like that. Also, what is this "download and recovery" in eRecovery even for if nothing downloads? I am very disappointed in this. Have no idea what I should be doing while normally I find a way to work around such problems.
TheVeeeMan said:
Same problem here in The Netherlands. Literally nothing works. Never even rooted this device or anything like that. Also, what is this "download and recovery" in eRecovery even for if nothing downloads? I am very disappointed in this. Have no idea what I should be doing while normally I find a way to work around such problems.
Click to expand...
Click to collapse
Zelfde probleem hier en nu een onbruikbare telefoon...
Nog geen half jaar oud!
Ik heb net Honor gemaild .. even afwachten tot morgen..
Sterkte alvast!
Thank you for the warning!
flash a stock rom by -=MoRpH=-.
these are factory firmwares and reset your device back to full stock, yes, even with locked bootloader!
Regards
OldDroid said:
flash a stock rom by -=MoRpH=-.
these are factory firmwares and reset your device back to full stock, yes, even with locked bootloader!
Regards
Click to expand...
Click to collapse
I have explicitly chosen to not root or otherwise mod my phone just yet. Does this void your warranty? Right now, I can send it back to the supplier and they will fix it. Of course if something else is faster (supplier says max. 3 weeks) then I am happy to try, if it does not void my warranty.
EDIT: and also, how can I see which version I need? I don't know how for sure which version I have, and of course I can't get into the UI anymore. As I posted before, ADB and Fastboot don't give me any info.
OldDroid said:
flash a stock rom by -=MoRpH=-.
these are factory firmwares and reset your device back to full stock, yes, even with locked bootloader!
Regards
Click to expand...
Click to collapse
Hello,
that didn't work.
:crying:
Krystal666 said:
Oh ,god, i was about to let people know that a new update b185 had just come up until i see this post...I immediatly stopped the downloading process of this Update, so bad news for the ones who already applied the update and who got stuck now...
There might be an ultimate solution for bricked phone by using the DC Phoenix unlock software method...
Click to expand...
Click to collapse
Thank you.
I have made use of many Huawei phones in recent years (Mate 7, Mate 9, P8 Lite, P9 Lite) and Honor 8 Pro. I quickly realized that this update was blocking; it was common sense to inform users of the Honor 8 Pro in order to limit the number of service returns, unnecessary time wastage, etc.
This is our precious ...
Welcome
Here in Holland this morning the same problem.
Thanks for the Info. No update notice for my phone (in Germany). Hopefully Huawei/Honor will have stopped the update rolling out. Jeez, don't these updates get tested before they're released?
You can use Firmware Finder for PC to send an update for installation via erecovery with changing your routers DNS.
Erecovery is used in customer services to install manually sent updates only. That's why it can't find anything without sending an update to your device.

I need help, my wifi not work

I have had a moto g6 plus for some time now, but nowadays I am not able to detect SIM cards and wifi does not turn on, what is happening?
Wellfare11 said:
I have had a moto g6 plus for some time now, but nowadays I am not able to detect SIM cards and wifi does not turn on, what is happening?
Click to expand...
Click to collapse
Can you tell us more?
How did it start?
Did something happen to it, or did you just notice it is not connecting?
The most easy things first, is your sim card correctly in place?
Which ROM are you on and have you reflashed it?
weazie said:
Can you tell us more?
How did it start?
Did something happen to it, or did you just notice it is not connecting?
The most easy things first, is your sim card correctly in place?
Which ROM are you on and have you reflashed it?
Click to expand...
Click to collapse
The phone started with problems since I upgraded to Android Pie, I have taken care of it very well but I do not know if it is a hardware failure, but note that in baseband turns out to be unknown, I installed several stock roms from fastboot without any success, also I thought it would be a problem of the EFS partition, but everything is fine I even took a backup in case the doubts, what could happen?
Wellfare11 said:
The phone started with problems since I upgraded to Android Pie, I have taken care of it very well but I do not know if it is a hardware failure, but note that in baseband turns out to be unknown, I installed several stock roms from fastboot without any success, also I thought it would be a problem of the EFS partition, but everything is fine I even took a backup in case the doubts, what could happen?
Click to expand...
Click to collapse
Did you originally update via OTA, meaning, was it the official update?
Then when you noticed it's not working, you tried to flash several stock ROMs?
One possible problem that comes to mind, is that for some reason, you have the wrong radio/modem firmware. That can happen for example, if you have flashed a ROM, which is not meant for your region.
weazie said:
Did you originally update via OTA, meaning, was it the official update?
Then when you noticed it's not working, you tried to flash several stock ROMs?
One possible problem that comes to mind, is that for some reason, you have the wrong radio/modem firmware. That can happen for example, if you have flashed a ROM, which is not meant for your region.
Click to expand...
Click to collapse
Yes, upgrade to Android pie via OTA
I already put a stock rom of the same region, following each fastboot command one by one, but everything continues the same, I even installed RROS 7, to see if at least it turned on the wifi, and it is in bootloop.
Wellfare11 said:
Yes, upgrade to Android pie via OTA
I already put a stock rom of the same region, following each fastboot command one by one, but everything continues the same, I even installed RROS 7, to see if at least it turned on the wifi, and it is in bootloop.
Click to expand...
Click to collapse
Go with the modding guide index: how to restore stock ROM etc., and flash a stock ROM that you know will work. Flash the radio/modem file too, and make sure it's the correct one.
Just to say, I had connection problems too, and in the end they were because the sim card did not latch correctly in place i.e. was not correctly in place.
weazie said:
Go with the modding guide index: how to restore stock ROM etc., and flash a stock ROM that you know will work. Flash the radio/modem file too, and make sure it's the correct one.
Just to say, I had connection problems too, and in the end they were because the sim card did not latch correctly in place i.e. was not correctly in place.
Click to expand...
Click to collapse
I already tried, I installed the rom corresponding to the model of the cell phone and the wifi still does not work, the base band is still unknown, I also checked if the sim card was correctly placed, and everything is fine
weazie said:
Go with the modding guide index: how to restore stock ROM etc., and flash a stock ROM that you know will work. Flash the radio/modem file too, and make sure it's the correct one.
Just to say, I had connection problems too, and in the end they were because the sim card did not latch correctly in place i.e. was not correctly in place.
Click to expand...
Click to collapse
I have an idea, but I need someone to help with a backup of the files, Radio, Modem, and Persist to flash in twrp
Wellfare11 said:
I have an idea, but I need someone to help with a backup of the files, Radio, Modem, and Persist to flash in twrp
Click to expand...
Click to collapse
Great that you have an idea. ?
Here's an idea: take a backup of your current config in twrp, move it to the computer, take a copy. Replace the files in that copy with the ones that you want to flash.
Did you mean this? You are aware that you can try different radio/modem files through fastboot, not having to flash everything else every time? That said, go with your idea. ?
weazie said:
Great that you have an idea.
Here's an idea: take a backup of your current config in twrp, move it to the computer, take a copy. Replace the files in that copy with the ones that you want to flash.
Did you mean this? You are aware that you can try different radio/modem files through fastboot, not having to flash everything else every time? That said, go with your idea.
Click to expand...
Click to collapse
I already tried and still does not give results curiously I have noticed that even in bootloader shows, Baseband not fund
Wellfare11 said:
I already tried and still does not give results curiously I have noticed that even in bootloader shows, Baseband not fund
Click to expand...
Click to collapse
Does the phone ask for a pin code at any point?
weazie said:
Does the phone ask for a pin code at any point?
Click to expand...
Click to collapse
does not request any code at any time
Wellfare11 said:
does not request any code at any time
Click to expand...
Click to collapse
Ok, but WiFi should work even if there is no mobile data available.
I probably can't help at this point, apologies! My suggestion is to flash a stock ROM, lock the bootloader and send the phone for repairs. There could be a solution to this, but I'm out of ideas. ?*
weazie said:
Ok, but WiFi should work even if there is no mobile data available.
I probably can't help at this point, apologies! My suggestion is to flash a stock ROM, lock the bootloader and send the phone for repairs. There could be a solution to this, but I'm out of ideas. *
Click to expand...
Click to collapse
from what I see, if there is no baseband it does not detect the sim card and it does not turn on the wifi, I will try to force an OTA retail update
it did not work
Wellfare11 said:
from what I see, if there is no baseband it does not detect the sim card and it does not turn on the wifi, I will try to force an OTA retail update
it did not work
Click to expand...
Click to collapse
Hello, colud you solve the problem? Because I am havig a very similar one...
Hello group friends, I'm new here. I have a similar problem, I was using the Havoc 2.4 rom, when upgrading to 2.6 I no longer recognize my SIM card and the wi-fi does not connect, I can not install another rom anymore, nor rom stock, recovery TRWP has been replaced by the Havoc and the Wipe System function does not work, and for a few days you can not stay in recovery mode anymore, it restarts every 3 seconds, not the time to click the options. Can someone help me. I'm without a cell phone, and I need it.
I have a similar issue after flashing the latest firmware. SIM goes to "SIM locked" every ten seconds or so, and Wifi drops at the same tie. It's like networking is being reset every 10 seconds. No network settings I've tried change that.
I've flashed several stock ROMs; the one I had previously, newest, oldest, both for RETEU and retail. I used Lenovo restore to upgrade but that resulted in soft brick, after that I flashed the latest firmware via Fastboot and that's when the problem started.
With Oreo, wifi and cellular don't work at all, nothing detected. With Pie they're connected and dropped in a loop. I can't help thinking that the Lenovo restore broke this somehow, but modem files have been reflashed several times after that with no change. I'm not getting the baseband error.
bitstuff said:
I have a similar issue after flashing the latest firmware. SIM goes to "SIM locked" every ten seconds or so, and Wifi drops at the same tie. It's like networking is being reset every 10 seconds. No network settings I've tried change that.
I've flashed several stock ROMs; the one I had previously, newest, oldest, both for RETEU and retail. I used Lenovo restore to upgrade but that resulted in soft brick, after that I flashed the latest firmware via Fastboot and that's when the problem started.
With Oreo, wifi and cellular don't work at all, nothing detected. With Pie they're connected and dropped in a loop. I can't help thinking that the Lenovo restore broke this somehow, but modem files have been reflashed several times after that with no change. I'm not getting the baseband error.
Click to expand...
Click to collapse
I have the exact same problem, I wasn't able to repair it so I sent it to service and tomorrow they will try to fix it for $35. The problem with goign back to previous versions is that you loose the IMEI and MAC . The problem with the pie version I believe is the baseband. If the service is able to fix it I will post the solution here for you to fix it .
bitstuff said:
I have a similar issue after flashing the latest firmware. SIM goes to "SIM locked" every ten seconds or so, and Wifi drops at the same tie. It's like networking is being reset every 10 seconds. No network settings I've tried change that.
I've flashed several stock ROMs; the one I had previously, newest, oldest, both for RETEU and retail. I used Lenovo restore to upgrade but that resulted in soft brick, after that I flashed the latest firmware via Fastboot and that's when the problem started.
With Oreo, wifi and cellular don't work at all, nothing detected. With Pie they're connected and dropped in a loop. I can't help thinking that the Lenovo restore broke this somehow, but modem files have been reflashed several times after that with no change. I'm not getting the baseband error.
Click to expand...
Click to collapse
Service couldn't fix it. Being honest they were quite incompetent, when I explained the problem he said "we should hire you" ( I am 16 years old) . Anyway, could you fix it? Because I am not even close
---------- Post added at 03:00 AM ---------- Previous post was at 02:54 AM ----------
caradobeco said:
Hello group friends, I'm new here. I have a similar problem, I was using the Havoc 2.4 rom, when upgrading to 2.6 I no longer recognize my SIM card and the wi-fi does not connect, I can not install another rom anymore, nor rom stock, recovery TRWP has been replaced by the Havoc and the Wipe System function does not work, and for a few days you can not stay in recovery mode anymore, it restarts every 3 seconds, not the time to click the options. Can someone help me. I'm without a cell phone, and I need it.
Click to expand...
Click to collapse
Sorry I answer so late, I didn's see the message before.
I believe you already tried puting it into bootloader mode. If that's the case, I had a similar problem recently an it solved alone, I let it loop for a while and suddenly fell, into dtock recovey, i factory reset (with stock recovery) and somehow stock was booted ( i believe it was because it was in inactive slot).
Hope this helps you
juampapo546 said:
Service couldn't fix it. Being honest they were quite incompetent, when I explained the problem he said "we should hire you" ( I am 16 years old) . Anyway, could you fix it? Because I am not even close
---------- Post added at 03:00 AM ---------- Previous post was at 02:54 AM ----------
Sorry I answer so late, I didn's see the message before.
I believe you already tried puting it into bootloader mode. If that's the case, I had a similar problem recently an it solved alone, I let it loop for a while and suddenly fell, into dtock recovey, i factory reset (with stock recovery) and somehow stock was booted ( i believe it was because it was in inactive slot).
Hope this helps you
Click to expand...
Click to collapse
I am still working on this, I actually did this to a work phone (I had permission to root/unroot). Something that has helped me so far is just getting familiar with the whole flashing process - https://android.gadgethacks.com/how...actory-images-android-using-fastboot-0175277/. I think from this article the problem lies in the modem/radio rom. That *should* be the only thing you need to flash on. However, I have noticed with a lot of roms on here, a modem rom is not included on the stock firmware. But that needs to match well to your phone from what I understand. I have tried a few modem roms already, unfortunately, but no luck.

Categories

Resources