I'm buying a TV with an ethernet port which has the feature of streaming via the net. Can I tether my phone to my PC and have the TV pull a signal from my PC using my phone as a modem? How would one do this?
Thanks!
this could be done using a pc and internet connection sharing or a cradlepoint router.
however, it will also be a great way to burn so much data usage to get your account suspended, warned or charged for overage.
Ive used massive amounts of data without being warned. In fact,Ive ran bit torrent. There is no way that I have not gone over the limit some month using the phone as my primary internet connection.
Im not entirely sure what the OP is asking,but here is what I know. You can use your phone as an internet connection in several ways. The easiest is using a hack to connect via USB or bluetooth. I have found this to be very unreliable. You can use a third party program to do the same thing as well. I use a program called PDA net which works much more reliably. You can also use hacks or third party programs to connect via wifi.
Your phone will provide a connection similar to slower DSL lines. You can expect 800-1200k downloads and 150-300k downloads (your millage may vary here,but that's what I have gotten in Ohio and Utah)
If you want to connect to an ethernet device there are a few options. You can use programs allow your phone to share over wifi and create an adhoc network. You can also connect your phone to an access point and then configure your network devices default gateways to point to the phone instead of the access point.
Ok, so I am looking at different options for reducing my bills and one of them is to get rid of the Verizon FIOS and replace it with the T-mobile service I am already paying for by replacing one of the lines with a mobile hotspot.
I have the Magicjack phone service now and it works fine however it requires an ethernet connection to the internet. I currently have it plugged into a Hub which is connected to the FIOS router. If I lose the router how would I be able to pickup the internet signal from the hotspot and get it to the ethernet connection of the magicjack???
(without plugging it into a computer which would require leaving the computer on all the time)
If you don't know how to make an ad hoc network, just search "how to" on whatever OS you're running. But anyways I had the idea to get my phone, ps3,and laptop on my high speed internet connection without a router. First thought was a reverse USB tether and then broadcast it to ps3....but it seems impossible on my cm7 gingerbread vibrant.(btw, no one bothered answering my post for help). So technically you don't even need to create an ad hoc network. I allowed sharing from my wired local network connection to my wireless connection on the laptop. Then enabled the wifi hotspot ability on my phone, did custom connection and picked up "AndroidAP" on my ps3 wireless connection, made sure that it aquired an IP but didn't care about internet just yet. I then connected the laptop to the "AndroidAP" access point under available wireless networks. Waited a minute and I see my computer as a media server on my ps3. Open the browser on the ps3 and voila! Online connection tested at 6.4 mbps download and a 2.8 Mbps upload. The phone acted as a wireless bridge but isn't drawing any data from it because the hotspot ability is for sharing....so now I need to figure out how to tap into the love on the phone.
If you haven't figured it out, you can get everything online in your house without buying a wireless router. This is a homemade access point that's super easy!
So I can use my standard USB cable and tether to the laptop and have net connection on lappy. Same with desktop. USB tether works just the same as wifi tether. What about getting a micro USB to RJ45 (ethernet) cable and tethering to the internet in jack on my router. Would that put the net signal on the router like a modem would?
Chopstix9 said:
So I can use my standard USB cable and tether to the laptop and have net connection on lappy. Same with desktop. USB tether works just the same as wifi tether. What about getting a micro USB to RJ45 (ethernet) cable and tethering to the internet in jack on my router. Would that put the net signal on the router like a modem would?
Click to expand...
Click to collapse
Or you could get a wireless adapter for your Desktop. That's what I did. Now I can stream Amazon Prime on my Xbox 360, and PC game at the same time.This is what I have and works like a charm.
Good luck.
Oh my desktop is already wireless enabled, that's not an issue... Been running the house off the phones for a couple years... Just gave up a little bit when I got rid of cable interet. Whole house networking to other computers in the house, had to plug the wireless printer back into the desktop, it's no longer a network printer, etc.... was just toying with the idea and wondering if it would work is all.
Actually, in looking at the micro usb - rj45 adapters, I don't think it will work. Those are actually ethernet adapters, like adding a network card to a slot on a pc. Made for taking a net signal FROM a network, not sending one TO it.
Correct me if I'm wrong, but can't you just get a compatible wireless dongle (Something you would use for sniffing/injecting packets) and use it as an access point so you can broadcast the signal throughout the house?
Another thing you can do is pick up a router that you can install Tomato or DD-WRT on and use it as a wireless client bridge. It would connect to your phone, and again, broadcast that signal through the house.
Chopstix9 said:
So I can use my standard USB cable and tether to the laptop and have net connection on lappy. Same with desktop. USB tether works just the same as wifi tether. What about getting a micro USB to RJ45 (ethernet) cable and tethering to the internet in jack on my router. Would that put the net signal on the router like a modem would?
Click to expand...
Click to collapse
DJNads said:
Another thing you can do is pick up a router that you can install Tomato or DD-WRT on and use it as a wireless client bridge. It would connect to your phone, and again, broadcast that signal through the house.
Click to expand...
Click to collapse
Correct. Assuming the phone would even operate in this manner (I've never tried but sounds like a great idea!), you'd need a router that is capable of operating in bridged mode/wireless bridge/access point mode (may be labeled as either of them). You'd then have to configure the router to said bridged mode. An easier route (and possibly more expensive) would be to purchase just an access point.
MrHyde03 said:
Correct. Assuming the phone would even operate in this manner (I've never tried but sounds like a great idea!), you'd need a router that is capable of operating in bridged mode/wireless bridge/access point mode (may be labeled as either of them). You'd then have to configure the router to said bridged mode. An easier route (and possibly more expensive) would be to purchase just an access point.
Click to expand...
Click to collapse
I may have an old WAP in my junk closet. A router that can bridge may work but first thing I think I would need is a router or WAP that has a USB connection on it.... I'm looking to plug the phone into the router to provide the internet signal instead of a cable/dsl modem, creating a typical LAN ... I can still use the LAN in-house sans the net connection. Just a pain to disconnect from one network (phone hotspot) and connect to another (netless LAN) for file transfers network printing etc ...
Chopstix9 said:
I may have an old WAP in my junk closet. A router that can bridge may work but first thing I think I would need is a router or WAP that has a USB connection on it.... I'm looking to plug the phone into the router to provide the internet signal instead of a cable/dsl modem, creating a typical LAN ... I can still use the LAN in-house sans the net connection. Just a pain to disconnect from one network (phone hotspot) and connect to another (netless LAN) for file transfers network printing etc ...
Click to expand...
Click to collapse
You shouldn't need to physically connect your phone to the router at all. Depending on what router you get, it should be able to pick up the wireless signal from your phone's hotspot and rebroadcast it as its own network.
Edit: And honestly, I'm not sure connecting the phone via usb to the router would even share the connection. That router doesn't have the drivers needed for that to work.
To the OP, off topic question but what did you have to do to activate wi fi tether? your sig, tells me that your on stock and can still do it, yes? thanks!
Side note, it's been awhile but when I moved into my apartment I had no internet for a few days.
I did the USB wired tether to a laptop, then the laptop I think I enabled ICS/internet connection sharing and then connected with rj45 to a router, and it shared that as the WAN connection.
motrinHD said:
To the OP, off topic question but what did you have to do to activate wi fi tether? your sig, tells me that your on stock and can still do it, yes? thanks!
Click to expand...
Click to collapse
What part of my sig tells you I am on stock?
I've done both these things. I've taken my cell and flashed a router with dd-wrt and set it up as a repeater bridge but that means that only the computers near that router gets internet, unless your house is wired for ethernet (or using wireless). My current setup is having the phone tethered to a computer running Zentyal linux. This is a cool distro that can replace a 2008 Small business server in a work environment but it does the trick for my router at home. I had it running on an old P4 and recently graduated to a Zotac Zbox Mini ID41 which is tucked away behind my TV. I set up the computer to hand out dhcp and be the router and gateway. When i plug in my cell in tethering mode, zentyal recognizes it and i set that USB device as external WAN. It usually takes some getting used to and about a minute to normalize after the phone is unplugged and taken on the road. This has worked for me so far but when i'm at work, no internet at home. I'm currently attempting to talk my workplace into letting me subsidize a Verizon Jetpack i can leave home which will do the same job.
As a side note, i live in rural WI and we only have Satellite internet as a choice, which really stinks as both carriers have a bandwidth cap which we were constantly hitting two weeks into the billing cycle. They then throttle you down to less than a meg until your billing cycle renews.
We RV all summer most years and I use WiFiRanger gear to network our 5th wheel. That way we can grab a WiFi AP if one is available and the credentials are known or I HotSpot my phone and the Router grabs the phone's WiFi AP and we are good to go.
If you are stationary and only intend to use the phone's HotSpot as a WiFi AP then WiFiRanger's GO2 should do the trick. They are currently working on a firmware upgrade that will allow some great bandwidth monitoring and device usage controls. Their price is comparable to most full featured routers being offered but not cheap.
I am a satisfied user and Beta tester of their equipment, not an employee or representative. We use several of their offerings to maximize our capabilities on the road.
Hi, New poster so if I've posted in the wrong area please don't bite
I've been connecting my phone to a smart device (miracast-ing 'direct') but as of late the connection has become unstable and generally unusable. I had the brainstorm of using an old router to stabilize the connection, this seems to have done the trick but now I'm unable to access the mobile data as WIFI has assumed priority. Please bear in mind I don't have home internet so the router is being used solely as a go between for phone and smart device. Is there any possibility of WiFi connection whilst have access to mobile data or is this just a pipedream?
Thanks in advance
You can just start a wifi network from your phone, connect the smart devices to your phones wifi and use mobile data normal as internet connection (this is standard if you start a wifi network from phone). You wouldnt even need the router with this szenario, if the wifi signal of your phone isnt strong enough you can connect your router to the phone and extend the wifi with the router.
saturday_night said:
You can just start a wifi network from your phone, connect the smart devices to your phones wifi and use mobile data normal as internet connection (this is standard if you start a wifi network from phone). You wouldnt even need the router with this szenario, if the wifi signal of your phone isnt strong enough you can connect your router to the phone and extend the wifi with the router.
Click to expand...
Click to collapse
Thanks for the reply
But creating a mobile hotspot won't help because it doesn't solve the faulty (actually non-existent) miracast connection, plus I don't need a hotspot because only the phone needs internet access. My earlier explanation was probably a bit vague.
My goal is to mirror my phone's screen but to also have internet access solely on my phone.
Phone➡Smart Device➡Display - Can't connect (used to work faultless).
Phone➡Router➡Smart Device➡Display - Connects but no mobile data available because the phone thinks the router has internet access covered.
Dowtish said:
Thanks for the reply
But creating a mobile hotspot won't help because it doesn't solve the faulty (actually non-existent) miracast connection, plus I don't need a hotspot because only the phone needs internet access. My earlier explanation was probably a bit vague.
My goal is to mirror my phone's screen but to also have internet access solely on my phone.
Phone➡Smart Device➡Display - Can't connect (used to work faultless).
Phone➡Router➡Smart Device➡Display - Connects but no mobile data available because the phone thinks the router has internet access covered.
Click to expand...
Click to collapse
Creating a hotspot is not for giving the other devices in your network internet access, this is the only way you can use the wifi on your phone with using mobile data at the same time. I dont know why but android devices never use mobile data when they are connected to a wifi network and there is no internet access available. So if you configure your router as a wifi repeater and setup the phone as base station, your wifi signal from phone to router should be good and you can connect your other devices to the router, the phone should see all devices in the same network if you stop the dhcp server in your router and only use the one from your phones hotspot. Should look like this :
Phone (with DHCP) <----Router---->Smart Device---> Display
saturday_night said:
Creating a hotspot is not for giving the other devices in your network internet access, this is the only way you can use the wifi on your phone with using mobile data at the same time. I dont know why but android devices never use mobile data when they are connected to a wifi network and there is no internet access available. So if you configure your router as a wifi repeater and setup the phone as base station, your wifi signal from phone to router should be good and you can connect your other devices to the router, the phone should see all devices in the same network if you stop the dhcp server in your router and only use the one from your phones hotspot. Should look like this :
Phone (with DHCP) <----Router---->Smart Device---> Display
Click to expand...
Click to collapse
Cheers will try it out.
Hopefully that sort of config is available on my router as it is loaded with a custom firmware from my old ISP provider.
Thanks
saturday_night said:
Creating a hotspot is not for giving the other devices in your network internet access, this is the only way you can use the wifi on your phone with using mobile data at the same time. I dont know why but android devices never use mobile data when they are connected to a wifi network and there is no internet access available. So if you configure your router as a wifi repeater and setup the phone as base station, your wifi signal from phone to router should be good and you can connect your other devices to the router, the phone should see all devices in the same network if you stop the dhcp server in your router and only use the one from your phones hotspot. Should look like this :
Phone (with DHCP) <----Router---->Smart Device---> Display
Click to expand...
Click to collapse
Router ISP custom firmware seems restrictive (no advanced wireless settings) plus WDS is not officially supported.
Possibly achievable but beyond my technical savvy
Thanks for the advice anyways.
Dowtish said:
Hi, New poster so if I've posted in the wrong area please don't bite
I've been connecting my phone to a smart device (miracast-ing 'direct') but as of late the connection has become unstable and generally unusable. I had the brainstorm of using an old router to stabilize the connection, this seems to have done the trick but now I'm unable to access the mobile data as WIFI has assumed priority. Please bear in mind I don't have home internet so the router is being used solely as a go between for phone and smart device. Is there any possibility of WiFi connection whilst have access to mobile data or is this just a pipedream?
Thanks in advance
Click to expand...
Click to collapse
Do not use WiFi 5Gz , use only 2,4Gz, and wifi 5Gz off for router and smartphone