Only one sim receives signal at a time - OnePlus 2 Q&A, Help & Troubleshooting

Hi,
So everything was working fine, unless I decided to explore a bit and messed up. I dialed *#*#4636#*#* and turned off data. Then i turned it on and maybe i also changed some band and boom. Now only sim 2 is receiving signal. When i take out sim 2, then sim 1 works perfectly. I played more with phone information and then suddenly sim 1 started working but sim 2 stopped receiving signals. So in short, only one sim receives signal at a time.
Any leads on how to solve this? Have already done a factory reset and wiped off the cache, but to no help.
Android version - 6.0.1
OS version - 3.0.2
Regards,

Hello tushar, I'm really sorry about that. Unfortunately i did the same thing and m receiving signal in one of the sim but never together. Its been a week for me and no solution. I really hope someone can provide us with an answer.

Finally......
Hello guys i solved this issue by flashing oxygen os 2.2.0 now my both sim are working fine.
Just flash oxygen os 2.2.0 which has dual SIM preference selection fix.

shan1990 said:
Finally......
Hello guys i solved this issue by flashing oxygen os 2.2.0 now my both sim are working fine.
Just flash oxygen os 2.2.0 which has dual SIM preference selection fix.
Click to expand...
Click to collapse
Hi,
Have you used erase command before, Bcz, I have already erased my modem 1 & 2.
Thanks in advance

Related

no signals even after fastboot rom

hi guys... i urgently need help..here is my problem..
im not getting signals on redmi 2 (1gb indian )
i flashed lolipop rom of redmi 2 prime than i installed custom recovery to flash cm14.1
i used that rom for few days
after than
today
i flashed back miui 8 via fastboot (4.4.4)
everything was fine but when i tried to change sim cards
i got no signals
i mean i cant swap sim cards i get this kind of error
and if i use single sim..it works
device id null
and all that error
i checked baseband version . it is showing unknown there .
device name shown is hm2 lte in
.
i tried fastboot method
please suggest
Hi there, You are not alone
I am also Redmi 2 (both 1gb and 2gb ram variant) user. I was using MIUI Kitkat, then switched to Lollipop using fastboot. Later I also used CM14 (Lineage OS - N). Few hours Iater after using it I felt buggy so finally I came back to MIUI 8 (Kitkat).
I also got Baseband unknown error, I will explain how it came and what to do next..
I basically have two Jio sims. so what I did what tried using the mobile (Redmi 2 1GB) with two JIO sims at the same time, I finished the DATA from sim 1 so I tried to swap Mobile DATA from sim 1 to sim 2. And that's it.!!
My Baseband became "UNKNOWN" and phone started to reboot.
How did I fixed this ? :
First of all, I have MIUI Lollipop (LP) Fastboot (FB) Rom as well as MIUI Kitkat (KK) Fastboot Rom (MIUI versions doesn't matter).
Next what I did was, Remove the SIM cards and Memory Card from my phone and Flashed the MIUI LP FB Rom. After successfully getting into MIUI welcome screen, I turned off the phone and again fastbooted it and flashed the MIUI KK rom. Now I dont get Unknown Baseband Error, If suppose you are a Jio user.! For your kind information use the JIO sim only on Sim 1 slot and also do not use two JIO sims like me. Redmi OS hasn't got developed much to switch sims with 4G higher band LTE simultaneously . If you need you can exchange the JIO sims manually by removing the previous sim from Slot 1.
NOTE : I have flashed with "FLASH ALL" option in MiFLash software.
Good luck, I hope my essay like reply will help you.!
ok...let me try this...
If still the problem persists , Here is my Detailed Solution :
ajayNvats said:
ok...let me try this...
Click to expand...
Click to collapse
Kindly try and tell me, If still the problem persists then I'll give another advanced brief solution.
Cause it needs your mobile to be rooted and also needs PC + few softwares to restore your IMEI (Bandbase) :good:

OnePlus 2 VOLTE Sign Disappear

Hello Friends , I have OnePlus 2 ( oxygen OS 3.6.1) with JIO on my 1st sim slot . Many times the VOLTE icons disappears from the status bar although the signal is full on the sim and the data is working .After VOLTE icons disappears I cant make any call from the sim and I dont have any other choice than disabling the sim card and re enabling it to bring the VOLTE back which is quite frustrating . Any help on this ?
Try resetting the network settings within your sim card menu. Revert if issue persists.
Hey I already tried network resetting but nothing works
perhaps reflashing the modem firmware file of 3.6.0 or 3.6.1 will solve your issue. Link is in the lineage OS 15 thread. Search for the keywords you'll get it. If you don't I'll link.
Hey send link didn't find it plz
[email protected] said:
Hello Friends , I have OnePlus 2 ( oxygen OS 3.6.1) with JIO on my 1st sim slot . Many times the VOLTE icons disappears from the status bar although the signal is full on the sim and the data is working .After VOLTE icons disappears I cant make any call from the sim and I dont have any other choice than disabling the sim card and re enabling it to bring the VOLTE back which is quite frustrating . Any help on this ?
Click to expand...
Click to collapse
I am also facing this issue recently.
I Tried reflashing the OS to 3.6.0 and 3.5.6 but same issue still persists. I cleaned Data and cache too.
(Jio VOLTE is now only working in SIM1 slot. Previously it used to work in SIM2 slot too. Even after flashing to older OS, facing same issue)
No success yet.
ShomiNa said:
I am also facing this issue recently.
I Tried reflashing the OS to 3.6.0 and 3.5.6 but same issue still persists. I cleaned Data and cache too.
(Jio VOLTE is now only working in SIM1 slot. Previously it used to work in SIM2 slot too. Even after flashing to older OS, facing same issue)
No success yet.
Click to expand...
Click to collapse
chances that u'r using 2 simcards... remove one and power on /off then isert second sim !
[email protected] said:
Hey send link didn't find it plz
Click to expand...
Click to collapse
Is your problem solved? Coz I m facing the same issue for a while now.
Even I'm facing the same issue?
I have to remove and reinsert sim every 1-2 hours to get volte back

Unique volte and data bug in all custom roms in my device.

Hey guys,
Recently I flashed nitrogen is roms by soleintic,the ROM was working flawlessly without any issues...Today I went to service centre to get my device's speaker changed.After getting my device back volte was not working while previously it was working,So I thought changing swapping the sim slots would do the work I did the same and volte was working then but my data was not getting connected it was showing some random error in ipv6 and ipv4,then I again switched the sim slots and in slot 2 the data was working but volte was not working so I thought reflashing the ROM would fix the error.I reflashed the ROM again but the error was still there...So I decided to switch ROM..so I flashed PE ROM 5 mins ago but it's showing the same error pls help me I can't understand the real problem.
Akshay8181 said:
Hey guys,
Recently I flashed nitrogen is roms by soleintic,the ROM was working flawlessly without any issues...Today I went to service centre to get my device's speaker changed.After getting my device back volte was not working while previously it was working,So I thought changing swapping the sim slots would do the work I did the same and volte was working then but my data was not getting connected it was showing some random error in ipv6 and ipv4,then I again switched the sim slots and in slot 2 the data was working but volte was not working so I thought reflashing the ROM would fix the error.I reflashed the ROM again but the error was still there...So I decided to switch ROM..so I flashed PE ROM 5 mins ago but it's showing the same error pls help me I can't understand the real problem.
Click to expand...
Click to collapse
In short...Volte is working in slot 1 where as data is not working in it where as data is working in slot 2 but volte is not working there....The exact thing on phone info is
Ipv4:fail(2)
Ipv6:fail(2)
HTTP client test:Failed(IoException)
Flash miui rom and then flash any custom rom. I'm not sure where it'll fix the problem but chances are high

Nokia 6(TA-1000) cellular network not work after Android Oreo

I just upgrade my Nokia 6(TA-1000) to official Android 8.0.0 (Oreo).
Then my Cellular network won't work anymore.
I live in Hong Kong, using sim card service "CMHK".
I think it is LTE/WCDMA mode.
Tried "*#*#4636#*#*" and changing the settings.
But the connection always shown IPv4: Failed(2)
The phone notification show it is connected and running 3G network.
But the upload/download speed is always 0KB/s.
Reset to factory setting already.
Before upgrade Android everything work fine.
Anyone have the same problems?
Now, what can i do....?
It seems I can't even downgrade my Android.
Only, have to wait for next update and hope it will fixed?
I think i am screwed.
Alvin Fung said:
I just upgrade my Nokia 6(TA-1000) to official Android 8.0.0 (Oreo).
Then my Cellular network won't work anymore.
I live in Hong Kong, using sim card service "CMHK".
I think it is LTE/WCDMA mode.
Tried "*#*#4636#*#*" and changing the settings.
But the connection always shown IPv4: Failed(2)
The phone notification show it is connected and running 3G network.
But the upload/download speed is always 0KB/s.
Reset to factory setting already.
Before upgrade Android everything work fine.
Anyone have the same problems?
Now, what can i do....?
It seems I can't even downgrade my Android.
Only, have to wait for next update and hope it will fixed?
I think i am screwed.
Click to expand...
Click to collapse
Why dont you hard reset your device, this could help you
Hard reset is done by recovery menu.
Hope this couls work for you
sltushar said:
Why dont you hard reset your device, this could help you
Hard reset is done by recovery menu.
Hope this couls work for you
Click to expand...
Click to collapse
I already do factory reset on System Settings.
I think it is the same as reset on recovery menu.
It still Android 8.0.0 and problem still exists.
Alvin Fung said:
I already do factory reset on System Settings.
I think it is the same as reset on recovery menu.
It still Android 8.0.0 and problem still exists.
Click to expand...
Click to collapse
No, there is a lot difference between system reset(soft reset) and recovery reset (hard reset)
Try it, may be it solve your problem
sltushar said:
No, there is a lot difference between system reset(soft reset) and recovery reset (hard reset)
Try it, may be it solve your problem
Click to expand...
Click to collapse
Tried. No luck, the problem still exists.
It seems you ****ed up modem firmware. What's the baseband version and build number from About?
Alvin Fung said:
I just upgrade my Nokia 6(TA-1000) to official Android 8.0.0 (Oreo).
Then my Cellular network won't work anymore.
I live in Hong Kong, using sim card service "CMHK".
I think it is LTE/WCDMA mode.
Tried "*#*#4636#*#*" and changing the settings.
But the connection always shown IPv4: Failed(2)
The phone notification show it is connected and running 3G network.
But the upload/download speed is always 0KB/s.
Reset to factory setting already.
Before upgrade Android everything work fine.
Anyone have the same problems?
Now, what can i do....?
It seems I can't even downgrade my Android.
Only, have to wait for next update and hope it will fixed?
I think i am screwed.
Click to expand...
Click to collapse
Have you tried other SIM cards, whether you work in your cell phone! Tried to register your network operator service in the settings! Set preferred network ~
---------- Post added at 11:04 AM ---------- Previous post was at 10:57 AM ----------
Have you tried other SIM cards, whether you work in your cell phone! Tried to register your network operator service in the settings! Set preferred network ~
qwertysmerty said:
It seems you ****ed up modem firmware. What's the baseband version and build number from About?
Click to expand...
Click to collapse
I use official update.
All firmware should be correct?
BTW, I get a new sim card from ISP but cellular network still not working.
Also, tried both sim card slot 1 and slot 2 nothing work.
May be new system not compatible with my SIM card service only which is "CMHK" aka "中國移動香港".
Hope next update will fix that...
Device name:
Nokia 6
Model
TA-1000
Android version
8.0.0
Android security patch level
January 1, 2018
Baseband version
MPSS.JO.3.0-00387-8937_GENNS_PACK-1.124813.1.126605.3
Kernel version
3.1.8.66-perf
Fri Jan 12 19:48:46 CST 2018
Camera firmware version
V100.0230.05
V010.0210.10
Touch panel firmware version
ilitek-V10010
Goodix-v1.05.29-HV
Build number
00CN_5_210
Baseband version looks good. I was just wonder if your ta-1000 ever had ta-1003 firmware installed. Don't know what's wrong with radio on your phone, sorry.
I have same problem in my Nokia 6 TA1003 after upgraded to 8.0
The CMHK sim in sim 2 slot the cellular network can work. sim 1 slot install other ISP sim card is no problem.
Just put the CMHK in sim 1 slot only run 3G voice services and cellular network not work.
NOKIA 6
hi,
i updated my nokia 6 TA-1000 to oreo update.
i faced many issues like lte not working.
in battery saver mode launcher is stopping suddenly.
it is not detecting the sim correctly.
i didnt get network signals correctly.
Then i tried to hard reset my mobile ,after complete reset and after rebooting it stopped at language selection,i clicked lets go many times but it is not working .it got stucked there.
is there anyway to get rid of it.i asked for nokia chat support but they are asking me to take mobile to nearest service center.
if there is any solution please guide me with it .thank you in advance.
I just turn off the cellular network yesterday.
After I wake up from bed, my phone Google service can not connect from wifi(can't use email, Google store).
BUT! After reinsert my sim card and turn back on cellular network, everything working now.
Both 4G cellular and Google service all good.
May be some part of the network is cached.
So, if you encounter this problem just turn off cellular network and wait.
BenSo2111 said:
I have same problem in my Nokia 6 TA1003 after upgraded to 8.0
The CMHK sim in sim 2 slot the cellular network can work. sim 1 slot install other ISP sim card is no problem.
Just put the CMHK in sim 1 slot only run 3G voice services and cellular network not work.
Click to expand...
Click to collapse
It seems that, the old slot 1 cached your sim card.
So, you change to slot 2 work, but you can't use SD card.
And I found that if you wait a long time the cache will clear.
You can try to insert sim card back to slot 1 after 1-2 days.
gamez cliq said:
hi,
i updated my nokia 6 TA-1000 to oreo update.
i faced many issues like lte not working.
in battery saver mode launcher is stopping suddenly.
it is not detecting the sim correctly.
i didnt get network signals correctly.
Then i tried to hard reset my mobile ,after complete reset and after rebooting it stopped at language selection,i clicked lets go many times but it is not working .it got stucked there.
is there anyway to get rid of it.i asked for nokia chat support but they are asking me to take mobile to nearest service center.
if there is any solution please guide me with it .thank you in advance.
Click to expand...
Click to collapse
The only option was left to flash stock firmware, but as it updated to oreo, its bootloader has also been updated so I will suggest you to wait for official oreo firmware to release, please don't try to downgrade your device for now, it can brick your device very badly, keep patience, if any solution will come out, we will definitely tell you
Sim detecting issues of Nokia 6
Have you got it fixed now?
I'm also having the same problem, and tell me how did you do it?
Nevklear said:
Have you got it fixed now?
I'm also having the same problem, and tell me how did you do it?
Click to expand...
Click to collapse
Yes, I got it fixed...
1) Just turn off your cellular network.
2) Wait for 1-2 days.
3) Turn on your cellular network again, it should work.
How can I off cellular network. Will keeping it in flight mode helps?
Alvin Fung said:
Yes, I got it fixed...
1) Just turn off your cellular network.
2) Wait for 1-2 days.
3) Turn on your cellular network again, it should work.
Click to expand...
Click to collapse
Thank you for raising this question. My phone got the same problem. I am just wondering if I should send it to maintenance center but I guess they will just do reset.
And by saying "turn off cellular network and wait for 1-2 days", do you mean by just turning off the data usage, or turning it to flight mode/ turning the phone.
Nevklear said:
Have you got it fixed now?
I'm also having the same problem, and tell me how did you do it?
Click to expand...
Click to collapse
I just read a comment from a forum in HK and some members find a way to fix the problem. I tried it and it is successful.
{lihkg.com/thread/544787/page/1?ref=web&post=20}
i face same problem .. Nokia care told me that your phone motherboard problem

Hardware Issue: Moto G5 Plus not connecting to network

Hi All, I have a Moto G5 Plus XT1686 from India. Since yesterday, the both SIMs don't register with the network, even if it does register I am unable to make./receive calls nor messages. I had tried Network reset, From Phone information changed settings to LTE/WCDMA even Factory reset. My phone is still boot loader locked. Anything I could do to reset the phone to working state, before I could get a new SIM. I dont have another phone from which I can check if this is a SIM problems, however I am trying to check that as well.
The problem occured after updating to oreo?
antojamez said:
The problem occured after updating to oreo?
Click to expand...
Click to collapse
Just before installation, while the notification came up. Oreo seems to work fine, finally narrowed it down to the SIM connectors, so need to get that replaced.
SIMs seems to work fine.
fordac said:
Just before installation, while the notification came up. Oreo seems to work fine, finally narrowed it down to the SIM connectors, so need to get that replaced.
SIMs seems to work fine.
Click to expand...
Click to collapse
I had the similar issue after oreo update. When i checked *#*#4636#*#* in phone info it showed radio off.
I solved it by flashing modem from the Oreo flashable zip of Soak test 1 and everything is working fine now.

Categories

Resources