Hello everyone.
I just bought a Nexus 7 version 2012 with the original stock ROM Android 4.2.1
And before applying the root / install a recovery or anything else, I decided ( Big mistake from me ) to update the firmware with the official version Jellybean 4.3 with the official method ( Parameter > Update firmware to Android 4.3 )
The Nexus reboot on bootloader and start the update, but after 30 secondes, install failed and I got a message called " Error" on the middle of the screen with the Android logo down.
Now, I'm stuck on bootloop on the " X " logo after "Google".
I tried the Full wipe but nothing changed because it doesn't affect the Bugged Firmware.
Apparently the solution will be to download something else with USB cable on ADB Sideload. But my USB debugging isn't enable...
I'm stuck with the official version and got no root, no revovery, nothing... just an official bug.
If someone have any solution I will be very grateful... Or should I have to send it to Asus with the Warranty ?
Thank you very much.
I think you just can flash factory images from bootloader and you good to go
martikung said:
I think you just can flash factory images from bootloader and you good to go
Click to expand...
Click to collapse
Problem solved, I restored it with Nexus Root Toolkit after unlock the bootloader and Flash Stock in Current status Soft-Bricked mode.
Thank you.
Please help needed!!
I'm stuck here for 3 days
Ok I'm going to tell everything I did,,
My Gionee E7 is indian version.
First I rooted my phone with kingo Root.
Than I flashed CWM chinese version.
I upgraded my system to kitkat and changed the recovery to stock.
I used it for a week than some how my music player and gallery were corrupted.
I don't have any rom so I download one but it was in chinese, flashed it to my gionee. than after rooting,,
I flashed the CWM, same I flashed weeks ago
Here my problem started :crying:
The CWM is not starting. I used recoery tool to boot into recovery after boot up it shows black screen. I used every method holding Vol+ and power button but the same result.
than I tired to get back to my stock recovery but it does the same.
flashed many times both recoveries but didn't worked.
I searched a lot and find a TWRP. I flashed it and wow it worked Finally I can boot into recoery mode.
Now I find the Nandroid backup of indian version. I made it a zip and flashed it through twrp.
My phone is back to indian version but its slow, not too much but its slow; camera, gallery and other apps take some time to open. I can't make or rcv phone calls. Now what i did is download the update form System update.
Now i got kitkat rom.zip but twrp failed to install it.
Some one on the internet was saying that its the problem with my Kernel. I have the latest kernel so CWM won't work cuz it uses old kernel and display drivers.
My
android version is 4.2.2
Kernel version is 3.4.0-svn2155
I also got TWRP for lolipop,
and I patched binary_update in my kitkat rom too but TWRP can't flash it
Thats my whooooolllleeeee story. "
I got stuck with this for almost 3 days now I'm damn tired can't do it anymore plz help :crying::crying::crying:
I figured it out by myself
Ok guyz didn't get any help so I figured it out by my self.
I'm posting it here so if anyone gets stuck like me could solve his issue
I used GNQC Download tool and flashed the whole firmware of my cell including, kernel, rom, recovery, boot everything.
Now I'm back to stock indian rom (jellybean) with stock recovery and now I'm going to upgrade to kitkat
I'm new user so I can't posts links just replace the (dot) in the link,
First download stock firmware of Gionee e7 in following link, GNQC download tool and drivers also included in this zip:
www(dot)androidxda.com/download-gionee-stock-rom-models
Just unzip it and follow the instructions on this site:
www(dot)androidxda.com/gnqc-downlod-tool
I didn't slept last night bcuz of this mess now going to sleep whole day :silly:
Goodnite and bless you all :angel:
AkashX4686 said:
Ok guyz didn't get any help so I figured it out by my self.
I'm posting it here so if anyone gets stuck like me could solve his issue
I used GNQC Download tool and flashed the whole firmware of my cell including, kernel, rom, recovery, boot everything.
Now I'm back to stock indian rom (jellybean) with stock recovery and now I'm going to upgrade to kitkat
I'm new user so I can't posts links just replace the (dot) in the link,
First download stock firmware of Gionee e7 in following link, GNQC download tool and drivers also included in this zip:
www(dot)androidxda.com/download-gionee-stock-rom-models
Just unzip it and follow the instructions on this site:
www(dot)androidxda.com/gnqc-downlod-tool
I didn't slept last night bcuz of this mess now going to sleep whole day :silly:
Goodnite and bless you all :angel:
Click to expand...
Click to collapse
Hello my friend, please help me.
I am trying to flash stock inidan rom 4.2 but.. I installed all CWM for E7 found on the internet and I am getting black screen. I managed to Install TWRP but TWRP cannot flash the rom that I need to flash. I flashed a chinese 4.2 but is piece of garbage..
gngc-download-tool said that the com port is closed.
I have windows 64 is this the problem causing gngc not working?
No its not, it is working on 64bit windows very well.
In TWRP factory reset and format system and data, than install
Chinese 4.2 ROM. After that boot it and try it again.
It should work!
bllkarv said:
Hello my friend, please help me.
I am trying to flash stock inidan rom 4.2 but.. I installed all CWM for E7 found on the internet and I am getting black screen. I managed to Install TWRP but TWRP cannot flash the rom that I need to flash. I flashed a chinese 4.2 but is piece of garbage..
gngc-download-tool said that the com port is closed.
I have windows 64 is this the problem causing gngc not working?
Click to expand...
Click to collapse
For me...problem!
there´s a cwm recovery that flashes over the kernel...
i flashed it and than i was unable to go to recovery, every time i tried the phone power off
Solution: Flash the stock boot.img
Use the file according to the Android version...
Help
I just rooted my gionee elife e7. Flashed the chinese recovery which seemed to be the only one which would be compatible. But, while changing a few setting using pimp my rom, the software just stopped working. Errors keep showing up on the screen - "system.ui is not working", "android app is not working", I cannot even go the settings because "settings is not working". Third party apps still seem to work, so, whatsap and stuff continue to function. Doing a factory reset or flashing firmware again seem to be the only viable option.
But, when I try to load up the bootloader using the power and volume keys, it gets stuck on the screen showing the gionee logo and it reads 'fastboot mode' in the bottom left hand side corner. So,
a. can you offer any advice which may be useful ?
b. can you share the link from where you got a TWRP recovery which will work on the Elife ?
c. do you have any idea what exactly went wrong here ?
Any help you can provide will be appreciated because, it's my mausi's phone and I will have a very tough time explaining what really went down here.
Regards,
my zenfone 2 laser is bootloop! (ZE500KG)
I try flash file TWRP but I can't do that!
It say ''Failed'' > '' zip verification failed''
anyone know how to fix it faulty?
TWRP 3.0.2-0 (TeamWin) for zenfone 2 laser!
ALSO DO NOT FLASH WITH ADB! Help me. :crying::crying::crying::crying::crying:
Hey,I dont know if u found the answer yet
TWRP can just flash unofficial rom
not official rom
if you want official rom
you have to use oem recovery...not twrp
I m look for answer too...that is all i know
TWRP can install both Stock Or Custom Roms...it is based upon the update-script...
I had an issue where I could install any of the cyanogenmod 13 nightly updates past June 14th on my phone, a ze551kl. I resolved the issue by updating to the OEM ROM 21.40 from the Asus website. Hopefully this is helpful.
I downloaded the following files from the?*Asus website and copied them into the?*SD Card?*of my phone:
- UL-Z00T-WW-1.16.40.763-user.zip
- UL-Z00T-WW-1.17.40.1234-user.zip
- UL-Z00T-WW-21.40.1220-1615-user.zip
- UL-Z00T-WW-21.40.1220-1794-user.zip
I then used fastboot to install the stock recovery image. After installing the stock recovery, I rebooted into recovery mode and installed 1.16 and restarted the phone. After the phone booted into 1.16, I rebooted into recovery and installed 1.17, etc . . . until I updated to 21.40.1220-1794.
After the last update, I replaced the stock recovery with TWRP and l was able to install the latest nightlies. It seems like installing 21.40 was the key to fixing this issue.
An important side note : I downloaded the WW ROMs because my phone is a WW region. If your phone is from a different region, you will need to download the appropriate ROMs.
Good luck with your phone.
ASUS ZenFone 2=ZE551ML(Z00AD/Z00ADA/Z00ADB/Z00ADC) software Image: V4.21.40.223 for WW SKU only* (andriod M)
Improvement Item:
1)Improve Wi-Fi/Bluetooth stability
2)Update Security patch
3)Improve system stability
4)Support India SOS call (India only)
Full Rom Download Link: http://dlcdnet.asus.com/pub/ASUS/ZenFone/ZE551ML/UL-Z00A-WW-4.21.40.223-user.zip
Hi,
How to install it on a rooted ZE551ML ?
When checking for OTA, it is not purposing the update for the moment.
Thanks
fredlamour said:
Hi,
How to install it on a rooted ZE551ML ?
When checking for OTA, it is not purposing the update for the moment.
Thanks
Click to expand...
Click to collapse
It is, but not if your bootloader is unlocked.
Rodepo said:
It is, but not if your bootloader is unlocked.
Click to expand...
Click to collapse
Thanks.
bootloader unlocked so no way.
I am thinking about jumping into a lineage rom.
VoLte support?? in this new update....
I felt like this was happening today! came in and here it is. Updating right now.
Thanks
any update for this update of asus zenfone 2
optimumgiant said:
any update for this update of asus zenfone 2
Click to expand...
Click to collapse
Hello. This forum is for galaxy 8.07. We don't know about zendroid 2 or whatever you ask.
Just joking. This IS for zenfone 2.
I'm currently using the update. Screen flickering has stopped for the time being.
i have a rooted device ZE551ml 2.3gzh 4gb and when i checked for firmware update it starts downloading and now my device is on the update prompt screen i.e. to install , postponed or cancel it.
so my question is :- is it safe to install the updates on a rooted device.
thanks in advance
crownpiyush said:
i have a rooted device ZE551ml 2.3gzh 4gb and when i checked for firmware update it starts downloading and now my device is on the update prompt screen i.e. to install , postponed or cancel it.
so my question is :- is it safe to install the updates on a rooted device.
thanks in advance
Click to expand...
Click to collapse
it seems you are first. Give it a try and find it out for yourself and let us know!
crownpiyush said:
i have a rooted device ZE551ml 2.3gzh 4gb and when i checked for firmware update it starts downloading and now my device is on the update prompt screen i.e. to install , postponed or cancel it.
so my question is :- is it safe to install the updates on a rooted device.
thanks in advance
Click to expand...
Click to collapse
My way is unroot and uninstall Xposed first, than sideload the whole rom with stock recovery.
I had failed to OTA many times because I modified some system files (forgot to restore them), so now I just reflash rom to save the trouble.
Wifi auto-connect problem seems fixed and the phone has more available ram after "power and boost".
It's worth to update imo.
Battery life seems the same
All sensors working with this version in my brazilian zenfone 2 z00a.
Running this for last two days so far , yup Wi-Fi connects quicker , graphics seem sharper round the web and there's the security patch .
To update ..
Coming from .184 rooted and twrp.
Full unroot first.
Then used the modder tool , to "return back to stock " option. Select boot.img then recovery.img, remember it flashes .134 .img's and I was coming from .184 to begin with.
Then boot to stock recovery .
Scroll to update from adb. Then adb cmd >
adb sideload MOFD_SDUPDATE.zip
Remembering to put the new firmware in adb/fastboot folder first and changing the file name to MOFD_SDUPDATE before sideloading.
Will give it a few more days then will try to use the modder tool to get back to lineage os and back up the new firmware.
I was on rooted .184 and twrp. I booted into fastboot, flashed recovery, booted to recovery, and updated from SD card. After the update has been installed and the phone booted, I unlocked the bootloader, flash twrp, root, remove bloatware, profit
audit13 said:
After the update has been installed and the phone booted, I unlocked the bootloader, flash twrp, root, remove bloatware, profit
Click to expand...
Click to collapse
I had unlocked the BL before so i updated and directly tried regaining root and xposed but failed (softbrick at asus loading screen), I confirm that applying the whole ota from sideload sort of relocks the bootloader and you must do it again, now it is booting and rebuilding the dalvik cache.
audit13 said:
I was on rooted .184 and twrp. I booted into fastboot, flashed recovery, booted to recovery, and updated from SD card. After the update has been installed and the phone booted, I unlocked the bootloader, flash twrp, root, remove bloatware, profit
Click to expand...
Click to collapse
In conclusion you did only flashed stock recovery and, from that, you flashed the whole zip in the first post, right?
Inviato dal mio ASUS_Z00AD utilizzando Tapatalk
timbernot said:
Running this for last two days so far , yup Wi-Fi connects quicker , graphics seem sharper round the web and there's the security patch .
To update ..
Coming from .184 rooted and twrp.
Full unroot first.
Then used the modder tool , to "return back to stock " option. Select boot.img then recovery.img, remember it flashes .134 .img's and I was coming from .184 to begin with.
Then boot to stock recovery .
Scroll to update from adb. Then adb cmd >
adb sideload MOFD_SDUPDATE.zip
Remembering to put the new firmware in adb/fastboot folder first and changing the file name to MOFD_SDUPDATE before sideloading.
Will give it a few more days then will try to use the modder tool to get back to lineage os and back up the new firmware.
Click to expand...
Click to collapse
Running this update since it came out 5hrs SOT over a 26hr period seems very good :good:
Still on stock no mods apart from using firefox browser with adblock .
Good to know too .... official downgrade version of LP WW-52.20.40.196 firmware is on my ext SD card and i still get notification for this downgrade update OTA after a reboot on this WW-4.21.40.223(andriod M) latest firmware
https://forum.xda-developers.com/zenfone2/help/success-downgrade-mm-to-lp-via-sd-card-t3520642
timbernot said:
Running this update since it came out 5hrs SOT over a 26hr period seems very good :good:
Still on stock no mods apart from using firefox browser with adblock .
Good to know too .... official downgrade version of LP WW-52.20.40.196 firmware is on my ext SD card and i still get notification for this downgrade update OTA after a reboot on this WW-4.21.40.223(andriod M) latest firmware
https://forum.xda-developers.com/zenfone2/help/success-downgrade-mm-to-lp-via-sd-card-t3520642
Click to expand...
Click to collapse
can you please share your adblock app with us.
thanks
crownpiyush said:
can you please share your adblock app with us.
thanks
Click to expand...
Click to collapse
its a add-on downloaded and installed from ` tools ` in firefox browser settings :good:
ps, i had trouble using adblockplus add-on from firefox ,when viewing XDA pages ..they turned out blank , XDA i think prevented the use of such adblock , so now i use the less blocking add-on in firefox called `uBlock`
its good enough
Chicken & egg situation caused by system & recovery SKU mismatch from the factory
Hi All,
I've been stuck on this for 2 days now and I thought maybe it would be quicker for someone here to point me in the right direction.
This thread isn't for my model of phone but it does help explain my problem in the most clear way.
https://www.asus.com/zentalk/thread-14962-1-1.html
This is what I have:
Asus Zenfone Max ZC550KL
- Z010D
- 8916
- 410
- 2GB
- CN Recovery
- WW System
The phone is stuck on android 5.0.2 and never received the OTA updates. or it did, but failed. I think the reason the phone has so many issues with updates is because the supplier of the phone side loaded the WW system image on top of a CN recovery. Apparently this is a no no.
So now I'm trying to fix the problem but I seem to be trapped in a chicken and egg type situation. I need to change the recovery firmware from CN to WW. To change the recovery firmware I first need to unlock the boot loader. When I try to install the unlock boot loader apk through adb it says "[INSTALL_FAILED_OLDER_SDK]". To unlock the boot loader I need to first update android. But I can't update android over OTA because that isn't working. I also can't update the firmware by copying the latest version from asus (8916-13.8.26.110) to the SD card because android doesn't notify me that it has found this update in the root directory. I can't even update the firmware by pushing it through adb. It says something like 'Can't install WW firmware on a CN phone'. Lastly I have also tried using the ASUS flash tool but that was unable to extract the firmware.zip. Apparently I need a raw firmware zip for aft to work but those are hard to come by.
I'm thinking my only option would be to either find an Asus boot loader unlocker that works on android 5.0.2 and the Z010D. Anyone know if this exists?
or force the normal asus boot loader unlocker to install on android 5.0.2. Anyone know if this is possible?
or find a raw firmware zip for the z010d to flash using AFT. Anyone seen this?
Any other suggestions?
Edit: I figured it out. Follow the instructions for using AFT here https://ainotech.com/how-to-flash-firmware-asus-zenfone-max-zc550kl-root-custom-twrp-recovery/
I used AFT v0.34 because the newer versions either couldn't see my phone or couldn't handle the zip file.
I also flashed the old v12 firmware they have listed because I couldn't find a newer version in raw format. (AFT requires raw zips). But it doesn't really matter if it's an old version because once AFT has flashed the WW recovery, you can freely update to whatever WW version you want using traditional methods. I didn't even manage to get that version running because of boot loops. But the recovery works perfectly. From there it was simply a matter of downloading the v13 zip from the asus website and flashing it from the recovery menu.