Hi all. I have problem with sp flash tool - cant detect my phone ( zte blade a1 c880u ). I have installed all enought drivers, but flash tool cant find my phone.. I follow this guide - https://www.youtube.com/watch?v=7kzMJ058xpw. I test that on windows 7 x86 and windows 10 x64 but flashtool cant find my phone..
Problem solved.. -> just uninstall stock ZTE drivers from control panel -> add/remove programs..
Related
my defy stuck on motorola logo after i was trying to install the cm7.2 rom
and the blue led isn't flash
I tried to flash it with motorola RSD lite but when I enter boot loader mode and connect it to my computer (Windows 7 64bit) it says it couldn't find the driver for S Flash OMAP3630
I've googled and I just can't find a driver for this thing anywhere!
what should i do ?? plz help me
7mrawy said:
my defy stuck on motorola logo after i was trying to install the cm7.2 rom
and the blue led isn't flash
I tried to flash it with motorola RSD lite but when I enter boot loader mode and connect it to my computer (Windows 7 64bit) it says it couldn't find the driver for S Flash OMAP3630
I've googled and I just can't find a driver for this thing anywhere!
what should i do ?? plz help me
Click to expand...
Click to collapse
Have you installed the latest drivers?
http://forum.xda-developers.com/showthread.php?p=17247255
If you still cant get it to flash, then try on a Win Xp PC if you have dual boot or at friend's place.
zopeon said:
Have you installed the latest drivers?
http://forum.xda-developers.com/showthread.php?p=17247255
If you still cant get it to flash, then try on a Win Xp PC if you have dual boot or at friend's place.
Click to expand...
Click to collapse
still couldn't find the driver for S Flash OMAP3630 ??
but thanks
Download Motorola Device Manager for Windows 7.
http://www.motorola.com/Support/CA-EN/Support-Home/USB-Drivers-and-PC-Charging-Drivers
If you want to flash cm7.2, you have to make sure to wipe data + cache + dalvik before flashing, and make
sure that you run a froyo kernel, not GB.
Have you tried using stock bootloader ? from there you must just do a factory wipe / reset and it should be all good check here , maybe it will help you ! :good:
Hit thanks button if i helped it
How to restore the Stock ROM:
For Grand X ProOK, today I'll be showing you how to restore the Grand X Pro back to Stock, just as it was before you flashed the custom ROM...
You will need:
A PC Running Windows 7 (ONLY WIN 7 WORKS FOR NOW)
The Grand X Pro
A USB Android Cable
My FlashTool
ZTE VCOM Preloader Drivers MT6577
So , first get the full flashtool from here: ApeelMe's Blogspot - ZTE Grand X Pro FlashTool
Also install the Preloader drivers if you didn't do so...
Plug in the Grand X Pro and then turn it off...
It should (on the PC) install some drivers and fail , don't worry...
Open flashtool and select the NandUtil file and the Scatter file (nandutil.bin and mt6577_scatter.txt , their names are like that)
In the menu where you can select ANDROID , RECOVERY , BOOT , MBR, DSP , Preloader , etc DON'T Touch anything as it will wipe that partition and you may hard-brick your device..
Click "Download" in flashtool, wait till the green circle...
After the green circle appears , close flashtool and disconnect the phone.
Now turn it on, good ol' stock ROM...
Hope this works for you as it did work for me...
TeamMaverick
it didn't work for me, it completes the download and evrything but it still just stands on zte sign an that is it, can you help?
trying to use but i get a nandutil.bin file is not a valid da format. Is it corrupted?
Anyhowse. i went ahead and flshed with all in one. im now with cyanogenmod and cwm which is the opposite of what i needed. How can I return to stock rom and stock recovery? basically i need to send it back to shop because of faulty screen.
Resolved. Followed guide with link here
http://apeelme.blogspot.no/2013/08/zte-blade-super-gyari-allapot.html?m=1
how did you manage to follow he steps in flash tool to find download agent and scaterr file, the all thees ebr1, and the rest....i have done everything FAILED, it didn't change nothing same thing like with the solution in this post
majmun123 said:
how did you manage to follow he steps in flash tool to find download agent and scaterr file, the all thees ebr1, and the rest....i have done everything FAILED, it didn't change nothing same thing like with the solution in this post
Click to expand...
Click to collapse
Didn't have any problems followed these steps:
1. run Flash_tool.exe from desktopfolder (maybe try run as admin if a problem)
2. select File-open scatter loading file
3. select MT6577_Android_scatter_emmc.txt from restore to stock folder.
the ebr1 etc should be automatically filled in with file pathway
4.click download button
5. plug in switched off telephone (if drivers installed properly should just run)
6. wait until green circle appears. hey presto! switch on telephone.
nothing i hav done all that, an the problem is when it is all finished, i get errors such as can't mount data, it doesn find anything, i don't know what to do else, if you want i can post pictures when i enter recovery mode
repair grand x pro
Hi, this is no working for me. Just have CWm after finished.
I tried update tool software too, but can't recognize phone, red x stay at chacking and installing drivers.
Someone help?
Hi there!!!
My OP5 is full dead!!! Black screen, no charging, no buttons !!!
That why ive tried change rom, flashed via twrp installed!!!
I think the good thing is PC can recognize because device in the Qualcomm HS-USB Qdloader 9008 /EDL mode.
I have tried unbrick it, using this tools
QFIL
Q phone download tool
eMMC DL TOOL
Xiaomi Mi Flas Tool
But....................I NEED A STOCK ROM MUST HAVE
“rawprogram0.XML”, “patch0.XML”, “prog_emmc_firehose_8974.mbn” and “MPRG8974.mbn” flashers . ETC, ETC
BECAUSE
OnePlus5OXYGEN_23_OTA_009_all_1707032123_c10521d0fb8b46c0. ZIP
is missing that kind of files.
DOES SOMEBODY CAN TELL ME WHERE CAN I GET THIS KIND OF ROM FOR OP5!!!????
HELP HELP
Get it from the official site
pls help me out sp flash tool cant detect my coolpad 8675 phone when i want to flash my phone an i hv installed coolpad setup driver, mtk driver, Vcom driver, mtk preloader Vcom usb port on my laptop till is not see my phone pls help me how to fix it, an i hold up volume bottom till sp flash tool can not detect my coolpad 8675 phone i till use YGDP to flash till is cant see my phone pls help me,
adex100 said:
pls help me out sp flash tool cant detect my coolpad 8675 phone when i want to flash my phone an i hv installed coolpad setup driver, mtk driver, Vcom driver, mtk preloader Vcom usb port on my laptop till is not see my phone pls help me how to fix it, an i hold up volume bottom till sp flash tool can not detect my coolpad 8675 phone i till use YGDP to flash till is cant see my phone pls help me,
Click to expand...
Click to collapse
Use QFIL because it is a Qualcomm Device....
Hello. While i tried flash twrp for newest ver and after reboot then cant go in again more to twrp.
I tried already thro MiFlash but PC doesnt recognize qualcom device, i have only "Coolpad Android Bootloader Interface" in device manager.
I also tried flash previous twrp CUOCO92 thro Windows CMD but i got error "unknown command".
I also tried with QFIL and QGDP/YGDP witch cpb file from here
and also doesnt work.
I also tried with Coolpad Download Assistant with this tutorial
https://forum.xda-developers.com/t/...-to-android-9-from-jui-or-nougat-rom.3954064/
but also doesn work, frozen at room upgrading for at least 1 hour and more, after that disconnected cable phone.
This phone is LeRee Le 3 C106
Please help me to recover my brick ;/
EDIT: FIXED!!!
miki666643 said:
Hello. While i tried flash twrp for newest ver and after reboot then cant go in again more to twrp.
I tried already thro MiFlash but PC doesnt recognize qualcom device, i have only "Coolpad Android Bootloader Interface" in device manager.
I also tried flash previous twrp CUOCO92 thro Windows CMD but i got error "unknown command".
I also tried with QFIL and QGDP/YGDP witch cpb file from here
and also doesnt work.
I also tried with Coolpad Download Assistant with this tutorial
https://forum.xda-developers.com/t/...-to-android-9-from-jui-or-nougat-rom.3954064/
but also doesn work, frozen at room upgrading for at least 1 hour and more, after that disconnected cable phone.
This phone is LeRee Le 3 C106
Please help me to recover my brick ;/
EDIT: FIXED!!!
Click to expand...
Click to collapse
HI, how do you have fixed? Please explain me....
dave21272 said:
HI, how do you have fixed? Please explain me....
Click to expand...
Click to collapse
thro YGDP_Tool_V4.0.6 installed original rom
1.52 GB file on MEGA
mega.nz
1. C1回退EUI刷机包 thro YGDP
2. TWRP_3.1.0_Cuoco92 thro mi flash
3. recovery from 4pda
4. ArrowOS Android 11 from 4pda
5. gapps
4pda helped me a lot
miki666643 said:
thro YGDP_Tool_V4.0.6 installed original rom
1.52 GB file on MEGA
mega.nz
1. C1回退EUI刷机包 thro YGDP
2. TWRP_3.1.0_Cuoco92 thro mi flash
3. recovery from 4pda
4. ArrowOS Android 11 from 4pda
5. gapps
4pda helped me a lot
Click to expand...
Click to collapse
Thanks!!! I try now!!!!
Can I flash if my pc recognized Coolpad Android Bootloader Interface wirh YGDP tool?
Great!!!!!!!!!!
my coolpad is alive !!!!!!!
The password for rar MEGA is : coolpadJUI2017
first flash init.cpb
second flash rom.cpb
and your phone is turn on !!!!!!!!!!!
yea exactly
However, I have another way.
1.Shut down your phone.
2.Hold Volume+ and Volume- , but WITHOUT power.
3.Connect it to computer.
4.If your phone's LED is flashing red lights, congratulations. You're now at 9008(EDL).
5.Download "C106-TWRP-需解压使用.zip“ from https://pan.baidu.com/s/1kdgu2YUstL...rentPath=/sharelink2927266148-452227205909178 .
6.Add a rom into the unzip folder.
7.Use QFIL(Miflash Public edition is okay,if you like) to flash it.
8.It should boot up.