Related
Hi I have a big problem because since I tried to reboot to install an add-blocker, I can't go into recovery and I can't start my gt-n9005 anymore because following error message comes:
Custom binary blocked by Reactivation Lock.
SECURE FAIL: KERNEL
And when I want to flash something with odin in download mode following error message appears:
SECURE CHECK FAIL: Recovery
Please help me I don't know what to do. Thank's in advanced...
Could please someone help me?
Can you boot your phone? If you, can, you can go to settings and uncheck the reactivation lock..after that, you should be able to enter recovery normally.
Regards!
empat said:
Can you boot your phone? If you, can, you can go to settings and uncheck the reactivation lock..after that, you should be able to enter recovery normally.
Regards!
Click to expand...
Click to collapse
My dear fellow please read the title of the OP , it says that mani1999 is not able to boot his phone !!! That's the major issue...
ketani73 said:
My dear fellow please read the title of the OP , it says that mani1999 is not able to boot his phone !!! That's the major issue...
Click to expand...
Click to collapse
Sorry, I misread the statement..my bad!
To the OP: what happens when you try to boot? I am asking because I just recovered my device from a similar condition...
Regards, sorry again!
empat said:
Sorry, I misread the statement..my bad!
To the OP: what happens when you try to boot? I am asking because I just recovered my device from a similar condition...
Regards, sorry again!
Click to expand...
Click to collapse
Apology not needed bro , sometimes such things happen to me as well (we are all humans & subject to making such errors) ....
Maybe a factory reset?
Regards!!
mani1999 said:
Hi I have a big problem because since I tried to reboot to install an add-blocker, I can't go into recovery and I can't start my gt-n9005 anymore because following error message comes:
Custom binary blocked by Reactivation Lock.
SECURE FAIL: KERNEL
And when I want to flash something with odin in download mode following error message appears:
SECURE CHECK FAIL: Recovery
Please help me I don't know what to do. Thank's in advanced...
Click to expand...
Click to collapse
Try flash back your country firmware with correct CSC.
Try this it might help if that is the thing you did before - http://forum.xda-developers.com/showpost.php?p=46389503&postcount=2 scroll down to section mention
HELP! I flashed N9005XXUBMJ3_N9005OXABMJ1 and now I am stuck in download mode! What do I do?!
You are mostly going to trip the KNOX Warranty at this point.
Flash this AP N9005XXUBMJ3_N9005OXABMJ1_BTU_RECOVER.tar.md5 (2.05 GB) and this CSC N9005OXABMJ3_CSC.tar.md5 (38.0 MB)
Click to expand...
Click to collapse
Factory reset won't help, as Reactivation is blocking you if you had use different country CSC and you did it before you un-tick the Reactivation Lock.
I can't boot my phone and i can't boot recovery...i always get the message "Custom binary blocked by Reactivation Lock. Secure fail: Kernel" with a yellow alert triangle underneath, even if I normally try to boot my phone. And when I than press the power button the phone turns off again.
I tried to flash cwm with odin but that also failed.
So before i go downloading another firmware (i live in a dormatory and only have 10gb internet a month) do you really think that would work?
mani1999 said:
I can't boot my phone and i can't boot recovery...i always get the message "Custom binary blocked by Reactivation Lock. Secure fail: Kernel" with a yellow alert triangle underneath, even if I normally try to boot my phone. And when I than press the power button the phone turns off again.
I tried to flash cwm with odin but that also failed.
So before i go downloading another firmware (i live in a dormatory and only have 10gb internet a month) do you really think that would work?
Click to expand...
Click to collapse
I had this exact problem recently and I booted by going into download mode and then pressing volume up to reboot. Somehow or other that would boot. Powering off and back on would always get that error that you are getting.
Thank you very much RP that let me boot and uncheck the lock. I had just installed Goo and put twrp on my device.
rp1790 said:
I had this exact problem recently and I booted by going into download mode and then pressing volume up to reboot. Somehow or other that would boot. Powering off and back on would always get that error that you are getting.
Click to expand...
Click to collapse
I put my phone into download mode but volume up mean geting into download mode. Its volume down to reboot but it still says the same when trying to boot. Custom Binary Blocked by Reactivation Lock. Secure Fail: Kernal. Kindly help please
Custom binary blocked by Reactivation Lock
njan_ivide said:
I put my phone into download mode but volume up mean geting into download mode. Its volume down to reboot but it still says the same when trying to boot. Custom Binary Blocked by Reactivation Lock. Secure Fail: Kernal. Kindly help please
Click to expand...
Click to collapse
Hey guys.
Had the same problem with a similar message after Flashing the N3EchoeSlimV2.zip. (was running on Xnote V3 europeen firmware )
Custom binary blocked by Reactivation Lock.
SECURE FAIL: RECOVERY
Only way to boot, was the download mod
So i went back stock rom with Odin.
But i coudnt flash any Custom recovery or Cfroot. Many tries with différent Odin version.
I finally installed a recovery after took the battery off a couple of hours.
Sorry for my bad english
Same problem here with the slim version!
Anybody have an idea?
Kinoal said:
Same problem here with the slim version!
Anybody have an idea?
Click to expand...
Click to collapse
I had posted the solution here on a different thread but let me make it easier for you:
Solution.
1. download KIES 3 (for note 3)
2. Click tools>Firmware upgrade and initialization
3. Put phone into download mode (press Volume down+Home Button+Power Button and then volume up)
4. Connect your phone (it is OK if it is not recognized by KIES, just keep it connected)
5. Now do as it says by typing in your Phone model number (check the battery compartment).
6. Type in the S/N.
7. Let it do its business and download the firmware.
8. Once firmware is downloaded, It will start communicating with the phone.
9. You can see a blue progress line on the screen under the android guy.
10. Let it finish and restart.
DONE! you are back to stock..
NOTE: This doesnt make your KNOX warranty 0x0 if it is already 0x1.
Click Thanks if it helped!!
Calm down guys
What I did was enter into download mode like rp1790 suggested and maybe he did a typing error. When in download mode press down to restart the phone. It bypassed the custom binary block error and booted as normal.
njan_ivide said:
I had posted the solution here on a different thread but let me make it easier for you:
Solution.
1. download KIES 3 (for note 3)
2. Click tools>Firmware upgrade and initialization
3. Put phone into download mode (press Volume down+Home Button+Power Button and then volume up)
4. Connect your phone (it is OK if it is not recognized by KIES, just keep it connected)
5. Now do as it says by typing in your Phone model number (check the battery compartment).
6. Type in the S/N.
7. Let it do its business and download the firmware.
8. Once firmware is downloaded, It will start communicating with the phone.
9. You can see a blue progress line on the screen under the android guy.
10. Let it finish and restart.
DONE! you are back to stock..
NOTE: This doesnt make your KNOX warranty 0x0 if it is already 0x1.
Click Thanks if it helped!!
Click to expand...
Click to collapse
This doesn't work if you install a firmware with the new bootloaders... You CAN'T flash an older bootloader over the new one. It just sends you into a bootloop....
And thats before you include the re-activation lock error...
Kinoal said:
Same problem here with the slim version!
Anybody have an idea?
Click to expand...
Click to collapse
I have also just encountered the same error as the OP, however the above method doesn't work for me, kies 3 gives me an unknown error (i.e. it doesn't say what error) and just fails.
Same deal as me, was using X-Note and installed the add blocker, rebooted, BAM.
Any help is going to be greatly appreciated!
:crying:
yop
i've the same problem and a full wipe fix it
Just got it fixed
I recently had this problem.
I've read from this thread to boot into download mode and just cancel. It will boot normally after that. I'll never reactivate it again.
Guys,
I was using the Cyanogenmod 11 for about 2 weeks and I always got the "kernel is not seandroid enforcing" message and the phone always booted up fine 90% of the times. Today I got the message saying that there was a new version of the firmware and I clicked ok for the phone to restart and begin the update process.
After that, I was stuck in the "kernel is not seandroid enforcing" message no matter what I did.
I entered the recovery mode and wiped the cache partition to see if that solved the problem. After this, I'm not able to access the recovery mode anymore and the phone is stuck on the samsung logo.
So I put it in download mode, opened Odin (It recognized the phone just fine) and flashed the original firmware in order to unbrick the phone. Got a PASS on Odin and I was still stuck on bootloop with no recovery mode.
Tried flash it again with the pit file (thought it would fix the partition) and the problem stills perssists.
I tried to run the Cyanogenmod installer and it doesn't recognize the phone anymore, saying the model is not compatible. Odin still recognizes the phone as always when I put it in download mode.
Any ideas?
Have I lost the phone ?
Thanks in advance for the help.
Best Regards
menaum said:
Guys,
I was using the Cyanogenmod 11 for about 2 weeks and I always got the "kernel is not seandroid enforcing" message and the phone always booted up fine 90% of the times. Today I got the message saying that there was a new version of the firmware and I clicked ok for the phone to restart and begin the update process.
After that, I was stuck in the "kernel is not seandroid enforcing" message no matter what I did.
I entered the recovery mode and wiped the cache partition to see if that solved the problem. After this, I'm not able to access the recovery mode anymore and the phone is stuck on the samsung logo.
So I put it in download mode, opened Odin (It recognized the phone just fine) and flashed the original firmware in order to unbrick the phone. Got a PASS on Odin and I was still stuck on bootloop with no recovery mode.
Tried flash it again with the pit file (thought it would fix the partition) and the problem stills perssists.
I tried to run the Cyanogenmod installer and it doesn't recognize the phone anymore, saying the model is not compatible. Odin still recognizes the phone as always when I put it in download mode.
Any ideas?
Have I lost the phone ?
Thanks in advance for the help.
Best Regards
Click to expand...
Click to collapse
Hi,
When you run the stock firmware through odin , you must wipe the cache an data before and after the flash.
Did you do that?
malybru said:
Hi,
When you run the stock firmware through odin , you must wipe the cache an data before and after the flash.
Did you do that?
Click to expand...
Click to collapse
I can't to that without the recovery mode, right?
I have no acess to the recovery mode.
menaum said:
I can't to that without the recovery mode, right?
I have no acess to the recovery mode.
Click to expand...
Click to collapse
Hi,
Are you sure you are trying to access it correctly?
Try holding the power button + volume up.
When the blue writing comes up , let go of all the buttons , and tap volume down.
If that still does not work , install the stock firmware again , and see if you can then get back to recovery mode.
malybru said:
Hi,
Are you sure you are trying to access it correctly?
Try holding the power button + volume up.
When the blue writing comes up , let go of all the buttons , and tap volume down.
If that still does not work , install the stock firmware again , and see if you can then get back to recovery mode.
Click to expand...
Click to collapse
Already did that, still no sucess. It enters the download mode normally but when I try to enter the recovery mode the blue text appears and then the screen goes black and the phone tries to boot and gets stuck on the samsung logo. (And yes I already tried holding the buttons until something else appears on the screen and nothing happens. )
And yes I'm trying to acess it correctly.
Thansks!
menaum said:
Already did that, still no sucess. It enters the download mode normally but when I try to enter the recovery mode the blue text appears and then the screen goes black and the phone tries to boot and gets stuck on the samsung logo. (And yes I already tried holding the buttons until something else appears on the screen and nothing happens. )
And yes I'm trying to acess it correctly.
Thansks!
Click to expand...
Click to collapse
Hi,
Do you have the knox bootloader?
What firmware are you trying to flash?
AT&T version here, same problem
malybru said:
Hi,
Do you have the knox bootloader?
What firmware are you trying to flash?
Click to expand...
Click to collapse
Quick ?: I have the AT&T s4 i337 with the same problem. Can i use the same method ? And no on the knox(saferoot) . 4.2 i believe. Thanx & sorry for butting in ! Ardonie
ardonie said:
Quick ?: I have the AT&T s4 i337 with the same problem. Can i use the same method ? And no on the knox(saferoot) . 4.2 i believe. Thanx & sorry for butting in ! Ardonie
Click to expand...
Click to collapse
Hi,
Then , you should try flashing a non-knox firmware .
Unfortunately ,I do not know AT&T firmwares.
Perhaps someone HERE can help.
I have the same issue on verizon, and searching for a solution. If you guys got any further in solving i would appreciate sharing the methods here
recovery is not Seandroid Enforcing
lorenzoraj said:
I have the same issue on verizon, and searching for a solution. If you guys got any further in solving i would appreciate sharing the methods here
Click to expand...
Click to collapse
I also have the same problem with Galaxy s4 Active (i9295)
Flashing recovery finish successfully (tried Philz,CWM, TWRP )
But afterwards no recovery exists anymore
only:
recovery is not Seandroid Enforcing
When I flash stock ROM again, the basic recovery it there - no option for applying zip files
Dear all..
im facing a problem trying to root my Note 3 LTE
i have done all steps to the rooting process
1- enabled the USB debugging mode
2- put my phone in download mode
3- started odin
4-installed the Samsung drivers
5-choose the CF-Auto-Root-hlte-hltexx-smn9005
6- clicked start button on ODIN 3.9 and done the same thing with ODIN 3.7
2 mins later odin says DONE
the phone stuck on
Recovery Booting ....
recovery is not senandroid enforcing
set warranty bit : recovery
although the odin says DONE
but the phone is stuck on that screen
Thanks and regards ...
Mr.SpY said:
Dear all..
im facing a problem trying to root my Note 3 LTE
i have done all steps to the rooting process
1- enabled the USB debugging mode
2- put my phone in download mode
3- started odin
4-installed the Samsung drivers
5-choose the CF-Auto-Root-hlte-hltexx-smn9005
6- clicked start button on ODIN 3.9 and done the same thing with ODIN 3.7
2 mins later odin says DONE
the phone stuck on
Recovery Booting ....
recovery is not senandroid enforcing
set warranty bit : recovery
although the odin says DONE
but the phone is stuck on that screen
Thanks and regards ...
Click to expand...
Click to collapse
Press volume up + menu + power button and data factory reset and then try to reboot or try pressing power for about 10 seconds or flash a custom recovery in download mode.
gee2012 said:
Press volume up + menu + power button and data factory reset and then try to reboot or try pressing power for about 10 seconds or flash a custom recovery in download mode.
Click to expand...
Click to collapse
i want to continue my rooting process , i can acsess my phone by going to download mode and choosing
cancel ( restart phone )
but my question is WHY i cant root the device ???
i don't have any problem accessing the phone ....
but my problem is that i want to root the device
thanks and regards
Mr.SpY said:
i want to continue my rooting process , i can acsess my phone by going to download mode and choosing
cancel ( restart phone )
but my question is WHY i cant root the device ???
i don't have any problem accessing the phone ....
but my problem is that i want to root the device
thanks and regards
Click to expand...
Click to collapse
If i we`re you i would flash a custom recovery (.tar file) with Odin in downloadmode from here here http://d-h.st/users/xiaolu/?fld_id=31963 (check for the right file like hlte) and flash the latest superSU.zip (1.94 i think) in recovery and that should work. BTW did you disable Kies in windows task manager?
Mr.SpY said:
i want to continue my rooting process , i can acsess my phone by going to download mode and choosing
cancel ( restart phone )
but my question is WHY i cant root the device ???
i don't have any problem accessing the phone ....
but my problem is that i want to root the device
thanks and regards
Click to expand...
Click to collapse
Did you follow and download the cf-auto root from here?http://forum.xda-developers.com/showthread.php?t=2466423
And you didn't mention about reactivation lock
Mr.SpY said:
Dear all..
im facing a problem trying to root my Note 3 LTE
i have done all steps to the rooting process
1- enabled the USB debugging mode
2- put my phone in download mode
3- started odin
4-installed the Samsung drivers
5-choose the CF-Auto-Root-hlte-hltexx-smn9005
6- clicked start button on ODIN 3.9 and done the same thing with ODIN 3.7
2 mins later odin says DONE
the phone stuck on
Recovery Booting ....
recovery is not senandroid enforcing
set warranty bit : recovery
although the odin says DONE
but the phone is stuck on that screen
Thanks and regards ...
Click to expand...
Click to collapse
Which os do you have 4.3 or 4.4.2?
hey_joe said:
Which os do you have 4.3 or 4.4.2?
Click to expand...
Click to collapse
YES I followed the instructions in the previous post
its is
4.3
Mr.SpY said:
YES I followed the instructions in the previous post
its is
4.3
Click to expand...
Click to collapse
You probably used the file meant for 4.4.2. Use this one for 4.3. It has the same name as the one for 4.4.2 so delete the one you previously used or extract on a different folder. No need to enable usb debugging as it's useless when in download mode but you need to make sure reactivation lock is off in settings>security.
thanx fellows
Yeah , that worked fine , im now rooted and voided my knox warranty :angel:
Thanks - TEAM
Mr.SpY said:
Yeah , that worked fine , im now rooted and voided my knox warranty :angel:
Thanks - TEAM
Click to expand...
Click to collapse
Welcome to the club Flash away my friend, lots of goodies await you.
Hi guys, I just recently attempted to root my Note 3 using CF-Auto-Root however after downloading and installing using my version (SM-N900T since I have tmo) it is stuck at a screen saying
RECOVERY BOOTING....
RECOVERY IS NOT SEANDROID ENFORCING
SET WARRANTY BIT: RECOVERY
It seems that I cannot leave this boot screen to get into download mode and the device will not boot into android so I am at a loss of what to do. My computer does not see the device when I plug it in.
nrkid9 said:
Hi guys, I just recently attempted to root my Note 3 using CF-Auto-Root however after downloading and installing using my version (SM-N900T since I have tmo) it is stuck at a screen saying
RECOVERY BOOTING....
RECOVERY IS NOT SEANDROID ENFORCING
SET WARRANTY BIT: RECOVERY
It seems that I cannot leave this boot screen to get into download mode and the device will not boot into android so I am at a loss of what to do. My computer does not see the device when I plug it in.
Click to expand...
Click to collapse
Use below file for rooting & once rooted successfully, switch off your phone & reboot in recovery.
http://d-h.st/J32
re: download mode
nrkid9 said:
Hi guys, I just recently attempted to root my Note 3 using CF-Auto-Root however after downloading and installing using my version (SM-N900T since I have tmo) it is stuck at a screen saying
RECOVERY BOOTING....
RECOVERY IS NOT SEANDROID ENFORCING
SET WARRANTY BIT: RECOVERY
It seems that I cannot leave this boot screen to get into download mode and the device will not boot into android so I am at a loss of what to do. My computer does not see the device when I plug it in.
Click to expand...
Click to collapse
Remove battery, wait 10 seconds replace battery and
hold down the volume down+power+home key at the
same time. Then the phone will go into download mode.
I have 4 sprint Note 3's I rooted with CWM for all 4 but one is "stuck" at recovery like this any time I turn it on it always tries to boot into recovery and gets stuck.
I can get into download mode. will cf auto root fix this? (trying to avoid a full odin restore)
the only thing different about this sprint note 3 that I am aware of is that its flashed to boost (if that matters it should not matter)
the other 3 went flawlessly. yes I tried to odin the cwm root a second time no change.
Thanks!!!
Thanks for the link. Just unboxed the note 3 (sprint) with version 4.3 and followed qbking77 and it was stuck on that same screen (tried it 3 times).
Your link saved me. :good::good::good:
I wonder why qbking's didn't work ... it always has in the past.
jdomadia said:
Use below file for rooting & once rooted successfully, switch off your phone & reboot in recovery.
http://d-h.st/J32
Click to expand...
Click to collapse
chickenmusket said:
Thanks for the link. Just unboxed the note 3 (sprint) with version 4.3 and followed qbking77 and it was stuck on that same screen (tried it 3 times).
Your link saved me. :good::good::good:
I wonder why qbking's didn't work ... it always has in the past.
Click to expand...
Click to collapse
Why didn't you use the specific file for your device (Note 3 Sprint): http://download.chainfire.eu/362/CF-Root/CF-Auto-Root/CF-Auto-Root-hltespr-hltespr-smn900p.zip
thought I was...
Maybe I'm getting dumber, or maybe it's getting more confusing to root. Seems like there's a crap load of how to root this device pages and it takes a long time to figure out which one actually works. Then once I find it, I'm faced with dead links to the downloads.
I read on many posts and comments that everyone is able to boot in download mode. My Note 3 just stuck on recovery boot and I can't get it to boot in download mode. I tried all of the suggestions about pressing three buttons, removing battery etc.
Does anyone know solution for when you can't get into download mode?
Thanks
Do you have access to a USB jig?
luqmaanki said:
I read on many posts and comments that everyone is able to boot in download mode. My Note 3 just stuck on recovery boot and I can't get it to boot in download mode. I tried all of the suggestions about pressing three buttons, removing battery etc.
Does anyone know solution for when you can't get into download mode?
Thanks
Click to expand...
Click to collapse
same problem here did you find solution please reply
As already posted .
Try USB Recovery Jig.
Fails then service centre .
twrp
vndnguyen said:
Why didn't you use the specific file for your device (Note 3 Sprint): http://download.chainfire.eu/362/CF-Root/CF-Auto-Root/CF-Auto-Root-hltespr-hltespr-smn900p.zip
Click to expand...
Click to collapse
i know this thread is old....but sometimes i have to access download mode, and then chose cancel in order for it to boot. usually from recovery when i tap reboot system, it brings me back to recovery. so i have to pull the battery and button combo to download mode then cancel. does this issue have any familiarity?
Someone please help I have a Samsung note edge that I just reset through the menu settings backup and reset option and phone turned off but did not fully come back on its just sitting on black Samsung Screen and on top left corner it says recovery booting set warranty bit : recovery in blue and yellow letters and I am able to got into the download screen but I press volume down just to cancel and reboot and stars coming on but gose back to same black Samung screen. Like i said I did not try rooting it or any such thing.
Wrong forum this is not EDGE model .
Download mode and flash stock rom through Odin is generic advice .
"Recovery Booting" Bootloop fix
A few months ago, my rooted Galaxy Note 3 (sm-n900t) was force closing and freezing my apps often. So I decided to boot into recovery to clear device cache. The 'recovery booting' would appear on the screen with the logo, but after 7 seconds it would reboot normally instead of opening recovery(I had version 3.2.3.0). So I did reboot recovery with Rom Toolbox and it began bootlooping with the message:
Recovery Booting....
Set Warranty Bit : recovery
It wouldn't boot normally, in recovery or download mode.
STEPS TO FIX:
1.) Let phone Bootloop until completely dead
2.) On PC downloaded (2.8.7.0) twrp file for device from twrp.me/devices
3.) Press and hold volume down + home + power until phone reboots into download mode.
4.) Plug device into PC USB where drivers are loaded.
5.) Start Odin or Samsung Tool z3x flashing tab
6.) Load twrp in AP or PDA section and flash
7.) Phone should reboot normally!
Hi, i was using Imperium v11 until today I grabbed my phone and it was off
Turned it on and it says:
KERNEL IS NOT SEANDROID ENFORCING
Set Warranty Bit: kernel
And loops.... cannot boot it even in recovery mode it says:
recovery mode (blue letters)
and then shuts down
What is the cause of this ?
And what can I do to avoid losing what I have and get it to work again ?
It seems that the problem is related to the power button, since i cannot enter any mode , neither recovery neither download... and i've read a few posts with same issue
how can i fix this?
carlcox89 said:
Hi, i was using Imperium v11 until today I grabbed my phone and it was off
Turned it on and it says:
KERNEL IS NOT SEANDROID ENFORCING
Set Warranty Bit: kernel
And loops.... cannot boot it even in recovery mode it says:
recovery mode (blue letters)
and then shuts down
What is the cause of this ?
And what can I do to avoid losing what I have and get it to work again ?
It seems that the problem is related to the power button, since i cannot enter any mode , neither recovery neither download... and i've read a few posts with same issue
how can i fix this?
Click to expand...
Click to collapse
Charge your phone first.
The kernel is not seandroid enforcing is just normal..ignore that
When you installed the rom, were you using it? Or just installed it and this happened? Well did you wipe data before installing your rom?
"If someone helps, never forget to hit thanks ? "
DeepankarS said:
Charge your phone first.
The kernel is not seandroid enforcing is just normal..ignore that
When you installed the rom, were you using it? Or just installed it and this happened? Well did you wipe data before installing your rom?
"If someone helps, never forget to hit thanks ? "
Click to expand...
Click to collapse
phone was charged... it's a problem related to the power button
i had to put some pressure on the button for it to "release"
carlcox89 said:
phone was charged... it's a problem related to the power button
i had to put some pressure on the button for it to "release"
Click to expand...
Click to collapse
Cool
"If someone helps, never forget to hit thanks ? "