Problem with samsung galaxy core prime
1) download mode not working
2) dosen't boot (stuck at boot)
3) it has original recovery, no custom recoveries (twrp, cwm, philz etc.) installed - so can't install any rom
4) phone is bricked
5) while installing original softwares from odin it show the following (screenshots included) - stuck at setupconnection...
6) partition problem - tried to install with all files including pit file but dosen't work stuck at set partition (get pit for mapping)
7) tried using adb sideload from stock recovery but dosen't work
8) tried flashing twrp, cwm, philz etc. using odin but dosen't work stuck at setupconnection.
Please help me..... :crying:
Related
I start Install customs roms on s5360
Before i was on stock rom, kernel & recovery
First i zip update ( root ) all work well
after ZIP cmw 6.0.1.2 the phone reboots
Only recovery mode and it stills there
Same things with installed twrp 2.8.7.0
Phone dont quit recovery mode
I try to Install stock roms several times by Odin (---.tar) or recovery mode(-----.ZIP)
But It fails there are some screenshots of pc
Thanks for helping or suggesting
+++++++++++++++++++++++++++++++++++++++++++++++
SOLVED:
After many trials i unbrick my phone by Odin3 version 1.85 on windows 7
My s5360 relive : Odin green pass by
flashing set S5360XXLK1 on this link http://www.mediafire.com/download/bkz8eln4xpiov1n/Galaxy+Y+2.3.6+Update+%28Indian%29.rar
it has 4 folders :
1- Bootloader
2-Pda
3- Modem
4- Csc
If this dont works
you can flash twice :
First flash with check repartition case pit folder " totoro_0623.pit "
In second time 4 folders far above
Kindly all
So I was going about doing my business, I rooted and flashed a custom XPosed framework build and after that my device got stuck in a TRWP bootloop, it will not go boot into anything but that.
(When rebooting from TRWP it says "No OS installed, are you sure you want to reboot?"
And when I try to flash a custom/stock ROM it gives me the error "E: Error executing updater binary in zip '/external_sd/ROMNAME.zip' "
Details:
Samsung Galaxy J5, SM-500FN, TWRP v2.8.7.0, Odin cannot recognize the phone while in TRWP which is the only possible state and the PC cannot access it's files, I need to use SD cards to get files on it.
Thanks a LOT to anyone helping me.
What do you mean TWRP is the only possible state? To use odin you need to boot to the USB Download Mode. To do this you need to take off the battery, put it in again, and then do Vol down + Home + Power.
You can flash stock firmware via odin, http://www.sammobile.com/firmwares/
Or flash Nick Verse's TWRP
http://forum.xda-developers.com/android/development/recovery-samsung-galaxy-j5-t3338869
And CM 12.1
http://forum.xda-developers.com/android/development/rom-cyanogenmod-samsung-galaxy-j5-t3404569
Today i was trying to install the Android Marshmallow 6.0.1 on my Galaxy S5 Snapdragon via Odin, i downloaded the firmware from Sammobile, i verified that the phone model was exactly the same as named on the firmware, i place the .md5 file in the AP slot and everything was ready to go! (The phone was already plugged and in Bootloader mode, and drivers were up to date) then when finishing the flash Odin FAILS to complete the flash and the phone is left with nothing than the Download mode, i panic and try to access recovery mode but realize that there´s no recovery....I proceed to install the recovery.tar into my phone and it works, i start the phone and Samsung logo comes up, finally it loads and does al the process after you flash a Samsung phone.
Everything works just fine!...except for one thing, THERE´S NO RECOVERY!!!. The phone works perfectly but when i try to enter recovery mode, it sends me to Odin mode as it displays a message saying that failed to boot into recovery.
Please help me i don´t know what to do.
Thanks!
Just flash a custom recovery like twrp or cwm
Already did...same problem, recovery won't boot
adavicco said:
Already did...same problem, recovery won't boot
Click to expand...
Click to collapse
You need to flash a pit file to complete the install correctly.
Hello guys,
I need extremely technical help as no longer know what to do.
I have a Galaxy S7 Edge device, which installed the rom BobCat and everything went well until then.
Later I decided to install another rom to test KingRom that left me unsatisfied, because I thought it had some bugs. Had the TWRP 3.0.0 recovery and decided to upgrade to 3.0.2, everything went well.
At one point I do not remember when or how if was when install back, downgrade to TWRP3.0.0, I do not remember if it was via Odin or TWRP, it happens that the installation stopped halfway. Then unplug the device, restarted in recovery mode and got the following message "E: falied to mount EFS (Invalid Argumen)", I could not restart the device (Boot Loop, and stucked at Samsung Logo) except in Recovery Mode, which also made to stay without IMEI number and Serial Number.
I googled until I came to this tutorial:
http://forum.xda-developers.com/s7-e...ssues-t3379516
I followed all the steps explained, I back up EFS_backup and RADIO_bakcup partitions.
Installed FACTORY BINARY G935, everything went well. After restarted, already had the correct IMEI number but still did not present the S / N.
After all that, i tried to install Stock Firmware via Odin, from here started the problems that could not solve.
In the first attempt Odin stucked in "System" (also used the PIT file with the same CSC ... .i do not know if I was right using PIT?). Restarted the device forcibly, entered the stock Recovery, did a complete wipe and always get this message "E: falied to mount System (Invalid argument), I returned to install Factory Binary, then reboot in Recovery and the same message no longer appeared.
Again I try to install the Stock Firmware and Odin always stucks in System, or NAND writing, or Partition, etc. I've tried various Stock Firmware, with and without PIT files, always without success.
Only Factory Binary that successfully installs. The TWRP via Odin also but when device restarts to enter Recovery Mode always get the message at the top of the display:
"Recovery image signature check Fail"
"Reboot to avoid Warranty bit set."
1. Does the partitions are in good shape? how can I check it?
2- I did good or bad using PIT file?
3- Does the problem is running Windows XP through a Virtual Machine?
4 What else can I do?
In all actions used and am using a Macbook 4.1, OsX Lion 10.7.5, Odin 3.11 Windows XP Professional 32bit through Oracle VM VirtualBox 3.4.38
Device:
Galaxy S7 Edge (SM-G935F) CSC = SWC SwissCom
1st Original Firmware: (I guess was 1?) G935FXXS1APG5_G935FVFG1APF3_SWC
Need help Please
Thank you so very much!
TWRP custom recovery installs but shows "cannot boot normally" on recovery mode boot
Hi, my device is Samsung Galaxy Note 3 sm-n900k (korean). I tried to flash custom recovery (twrp). These are the steps I followed:
-> Went into developers mode and checked USB debugging.
-> Went to security and disabled reactivation lock.
-> Downloaded latest Odin (v3.13.1).
-> Downloaded latest TWRP (twrp-3.2.3-0-hlte.img.tar).
-> Flashed TWRP with odin and Odin showed Pass.(I put my device into download mode did everything suggested in a thread )
-> then I tried to boot in recovery mode but , a message at the top of the screen was displayed in red color : "cannot boot normally".
Please help. Did I do something wrong? Thanks in advance.
twrp FOR 900K ??
JJEgan said:
twrp FOR 900K ??
Click to expand...
Click to collapse
Yes. I downloaded it from twrp site. I am not allowed to post a link so the page I downladed it from goes like this:
twrp site -> Searched Samsunge Galaxy Note 3 -> Samsung Galaxy Note 3 (Americas, China, Europe & Korea) (hlte)
Try older twrp
Or read the identical threads .
https://twrp.me/samsung/samsunggalaxynote3qualcomm.html
Actually I have already tried about 8 older versions. Upto " twrp-2.8.7.0-hlte-4.4.img.tar " because the official site mentioned they update to support newer devices, I even tried using older version of Odin, also hit many similar threads. But there is very little thread for sm-n900k and reagrding this problem of TWRP not booting even with successful installation. But thanks anyways.
Try Philz Recovery or CWM if installs you can flash twrp zip