Related
Hello. I recently switched from the iPhone to android and I rooted using the motochopper.zip. After I was done, I pressed the power button and then pressed it again to see the facial recognition lock. Then, it just froze. I pressed and held the power button and it has been stuck on the android recovery loop. I tried putting it into "download mode" as people have recommended and download this "custom OS", but it's stuck downloading. I've tried searching it up, but people are saying to "flash the ROM" or using "Odin". Since I am a new android user, I have no idea what they're talking about.
I know that there's some threads about this, but they're not on my device and they're outdated.
Your help is greatly appreciated. Thanks!
What phone do you have?
Sent from my Nokia 5120. Rocking it oldschool
bhp090808 said:
What phone do you have?
Sent from my Nokia 5120. Rocking it oldschool
Click to expand...
Click to collapse
Galaxy S4 AT&T
Same thing here
I'm having the exact same problem. I can't even get into download mode to try and restore. I'm not new to android and have had several Galaxy phones in the past. I think the internal SD is either corrupt or the OS has simply been wiped from it somehow. The phone boots and shows the Samsung logo with the "Custom" unlock icon then reboots and boots into stock recovery. Once in stock recovery, if I try to wipe cache it says "Wipe error" and goes back to the main menu. My phone is rooted with Motochopper since the release of the exploit. With the bootloader still locked, I haven't even attempted any other mods or flashes. My phone was fine all day yesterday but my battery completely died last night while I was out. I plugged it in and let it charge all night, the phone is fully charged. Removed SIM, external SD, still nothing. I'm going to continue to try and get to download mode but I've just about tried everything I can. Anything this awesome community can help with would be great, luckily I still have my Nexus so it'll do until I can call AT&T on Monday. Its a corporate account so a retail store won't touch it.
You guys try the vol down home button power button combo?
ATT S4 Rooted. Beastin.
4.2.2
There ya go.
http://forum.xda-developers.com/showthread.php?p=40976805
You should not lose any data.
As to how this happened I would suspect you guys were playing with Xposed framework and Cydia. That's how a lot of people are getting stuck in this recovery menu.
Sent from my SAMSUNG-SGH-I337 using xda premium
Odin restore worked..
I was trying the wrong button combination to get into download mode. I forgot I had installed and messed around with Cydia. Thanks for the help, this is why I love this place.
Android System Recovery
Hi,
I accidentally dropped my Galaxy S I and whenever I turn it on, there is a message that says:
Android system recovery <3e>
Enter: OK Key, Select : Vol UP/ Vol down
Reboot system now
apply update from sdcard
wipe data/ factory reset
wipe cache partition
"Reboot system now" is highlighted and I can't select other options for some reason. I took out the battery and the sd card, pressed every single button but it doesn't seem to work. I have no idea what I'm supposed to do!
Your help is really appreciated. Thank you
europ99 said:
Hi,
I accidentally dropped my Galaxy S I and whenever I turn it on, there is a message that says:
Android system recovery <3e>
Enter: OK Key, Select : Vol UP/ Vol down
Reboot system now
apply update from sdcard
wipe data/ factory reset
wipe cache partition
"Reboot system now" is highlighted and I can't select other options for some reason. I took out the battery and the sd card, pressed every single button but it doesn't seem to work. I have no idea what I'm supposed to do!
Your help is really appreciated. Thank you
Click to expand...
Click to collapse
A. You brought back a resolved thread from MAY????????????
B. You dropped your phone.....replace it. Warranty or insurance is your best bet. If warranty won't cover it or if you have no insurance on it, you could try to get Samsung to repair it for less than buying a new one (usually).
Please don't bring back any more OLD and RESOLVED threads.
unable to root and install cmw recovery on my Samsung galaxy grand duos gt 19082
Hi....
I am having Samsung galaxy grand duos gt 19082
having andriod 4.2.2
I want to root and install clockwork mod recovery
but I am not able to do this
please help
please
when I went to download mode
Then my phone goes to android system recovery <3e>
And when flash any zip file or rom
then it says E:signature verification failed
after this it auto reboot s
I also tried to do this with all versions of odin
but in this recovery mode odin is unable to detect my port or mobile
so please help me
please help
help me
help me
please
This is a s4 thread.. Perhaps why its not working?
mf3 rooted SHOstock 2.3
Cant get into download mode on 4.4.2
scott14719 said:
A. You brought back a resolved thread from MAY????????????
B. You dropped your phone.....replace it. Warranty or insurance is your best bet. If warranty won't cover it or if you have no insurance on it, you could try to get Samsung to repair it for less than buying a new one (usually).
Please don't bring back any more OLD and RESOLVED threads.
Click to expand...
Click to collapse
You are wrong this thread isn't resolved. I have the same problem with my Tmobile S4 (M919). When the phone boots without me pressing any buttons, it goes to
Android system recovery <3e>
KOT49h.m919UVUFNB4
and when I HOLD VOLUME DOWN + HOME + POWER it boots as it should. I can't go into download mode. I'm not sure but I think it has something to do with KNOX.
Please help if you have a way to get into DOWNLOAD MODE. I have tried button combination and adb (reboot download) methods.
Help
Hi,
I've just got a Note 3 but it's status is Custom. I don't think it's rooted, I certainly haven't done it.
Basically I want the Kit Kat update but it tells me I can't update OTA as it's modified and through Kies it says it's up to date which isn't true. I'm on 4.3.
I tried rebooting into recovery but it errors when I try and doesn't tell me any information about KNOX lock etc.
Anyway If I can do the update with Odin I'd be happy but could you help me:
Firstly what version of Odin should I use. I can see a 3.07. It seems old but is that OK ?
Secondly I can't work out what firmware I need to download for it. I have done *#1234# and this is what it tells me the following:
AP: N9005XXUBMJ3
CP: N9005XXUBMJ1
CSC:N9005DBTBMJ3
Any ideas what it is and which I'd need to download for it ? When I got it the phone was set to German by default but I'm not sure if that means it is German or not.
Any help would be greatly appreciated!!
Daniel
You might want to try asking in the Note3 forum. You will get better answers.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Thanks for the tip
Your tip on booting in safe mode helped me get out of recovery mode. Thanks.
stevehkim said:
You guys try the vol down home button power button combo?
ATT S4 Rooted. Beastin.
4.2.2
Click to expand...
Click to collapse
ANDROID SYSTEM RECOVERY (3e) Gallaxy S4
ZPaul2Fresh8 said:
There ya go.
http://forum.xda-developers.com/showthread.php?p=40976805
You should not lose any data.
As to how this happened I would suspect you guys were playing with Xposed framework and Cydia. That's how a lot of people are getting stuck in this recovery menu.
Sent from my SAMSUNG-SGH-I337 using xda premium
Click to expand...
Click to collapse
I am new to this website so forgive me if this has already been addressed. My daughter's phone has the Android System Restore (3e) message. I am trying to figure out a way to save her pictures and contacts without having to do a factory reset. Will the above file allow us to correc this problem and keep the contacts and pictures? She has pictures on her phone she needs to pass a class so she can graduate. Any and all helpl would be appreciated. If someone is able to walk me through this - I would appreciate it
So i followed the Odin post as it was, and i'm still stuck and seems no way out.
when i click "start" to flash and resetup the factory FW, i get the following.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337UCUAMDB_I337ATTAMDB_I337UCUAMDB_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Added!!
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/009> Removed!!
<ID:0/009> Added!!
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> aboot.mbn
<ID:0/009> NAND Write Start!!
<ID:0/009> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
what am i doing wrong that i cant flash back to stock so i can flash PACMAN on my S4?
Your device was running a firmware newer than amdl. You will need to flash the mf3 or mk2 tar file in Odin. They are linked in the general section.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Red_81 said:
Your device was running a firmware newer than amdl. You will need to flash the mf3 or mk2 tar file in Odin. They are linked in the general section.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
is this post the one i need Red? when looking it was one of the first i seen with the info you gave me.
AndriodVamps said:
is this post the one i need Red? when looking it was one of the first i seen with the info you gave me.
Click to expand...
Click to collapse
Yes, use the all in one tar file. It's mk2
Sent from my Nexus 5
People asked me Hey TechnoCrat,
Rooting my Android phone went well, but I've tried to flash a custom ROM and now I think I've bricked my phone. Is there anything I can do?
…
First of all, lets get something straight. Most people use the term "bricked" improperly. A bricked phone means one thing: your phone won't turn on in any way, shape or form, and there's nothing you can do to fix it. It is, for all intents and purposes, as useful as a brick. A phone stuck in a boot loop is not bricked, nor is a phone that boots straight into recovery mode. These are things you can usually fix, and they're a lot more common than a truly bricked phone. If your phone is actually bricked, you won't be able to fix it yourself (but there are things you can do—see the end of this article). For those other problems, you have a few options.
If Your Phone Keeps Rebooting: Wipe Your Data and Cache
How Do I Fix My Bricked Android Phone?
If you've flashed a ROM and your phone won't boot into the home screen, it's probably because you forgot to wipe your data and/or cache. It's trying to boot into the ROM, but some leftover data from your last ROM is causing it to error out, and it'll reboot itself over and over again. If your phone's eating a big bowl of boot loops, your first course of action should be to wipe its data and cache, which you can do from recovery mode. This method assumes you're using ClockworkMod Recovery, like the majority of Android users, but if your particular phone uses a different third-party recovery (like AmonRA), you should still be able to find these options in the interface. They might just be in a different place. To wipe your data and cache:
Power down your phone. Turn it back on and boot into Recovery mode. This is a bit different for every phone, so you'll have to Google how to do it for your specific model. Usually it involves holding down another button, like Volume Down, as you turn your phone on. HTC phones will have to then select "Recovery" from a menu, while other phones will boot directly into ClockworkMod. You'll know you're in ClockworkMod by the words "ClockworkMod Recovery" at the top of the screen.
Use your volume keys to navigate the menus, and your power button to select menu items. Scroll down to Advanced, and choose "Wipe Dalvik Cache". When that's finished, go back to the main screen and choose "Wipe Cache Partition". Lastly, head to "Wipe Data/Factory Reset". This will delete all your settings and apps, but you should still be using the correct ROM.
Reboot your phone.
Click to expand...
Click to collapse
With any luck, it should boot right into your ROM. If that didn't work, try the below method with the same ROM (or with a different ROM) and see if you get different results.
If Your Phone Boots Straight Into Recovery: Flash a New ROM
How Do I Fix My Bricked Android Phone?
If, when you boot up your phone, it goes straight into ClockworkMod, then there's likely an issue with the ROM you flashed. Note that some ROMs boot into recovery mode automatically after flashing, so reboot your phone once from recovery mode to make sure you're having a problem. HTC users: if you boot up your phone, it might go straight into the bootloader—check to see whether you can choose "Recovery" from the list before continuing to the next step. HTC phones usually don't boot straight into recovery.
In this case, you'll want to reflash the ROM from scratch. Try again with the ROM that messed up your phone, if you so choose, but if that doesn't work, try an entirely different ROM. The best way to do this is to download a ROM from somewhere on the net and putting it on your SD card. You'll need to take the SD card out of your phone, and you'll need an SD card reader that you can plug into your computer. Here's how it works:
Plug the SD card into your computer. Drag the ROM's ZIP file to your SD card, and wait for it to copy.
When it's done copying, eject the SD card and put it back in your phone. Reboot into Recovery mode. This is a bit different for every phone, so you'll have to Google how to do it for your specific model. Usually it involves holding down another button, like Volume Down, as you turn your phone on. HTC phones will have to then select "Recovery" from a menu, while other phones will boot directly into ClockworkMod. You'll know you're in ClockworkMod by the words "ClockworkMod Recovery" at the top of the screen.
Use your volume keys to navigate the menus, and your power button to select menu items. Scroll down to "Install ZIP From SD Card" and navigate to the ZIP file you just copied over. Give it time to flash the ROM.
When it's done, reboot your phone.
Hopefully, your phone should successfully boot into the new ROM. From there, you can probably assume that the previous ROM that messed up your phone isn't going to work, and you'll have to find another ROM for now—or find another copy of that ROM that isn't corrupted. Remember to make backups of your working ROMs so you don't lose all your data!
Click to expand...
Click to collapse
If Your Phone Boots Straight Into its Bootloader: Restore From a Stock ROM
If you're really having trouble, one of the most surefire ways to get your phone working again is to restore from the original ROM your phone came with—unrooted, stock, stable goodness. Each manufacturer and phone has a different method for doing this, and we can't go into too much detail here, but we can steer you in the right direction.Like Samsung has odin.
Note that this will unroot your phone, and return it to exactly how it was when you bought it from the store. You'll lose all your apps, settings, ClockworkMod recovery, you'll get over-the-air updates again, and you'll even have to re-activate your phone if you're on a CDMA provider like Verizon or Sprint.
For Samsung Phones: If you're using a Samsung Galaxy phone, you can use a tool called Odin to reflash an OPS file, which is a stock ROM that will return your phone to factory settings. You'll need a Windows machine and a copy of Odin, which you can find by Googling around the net (as its not an official tool). Check out the video to the left to see an example of Odin, and check out The Unlockr's guide to using Odin to familiarize yourself. You may need to Google around for your specific device's OPS file and instructions.
Click to expand...
Click to collapse
If You Get Errors with Any of The Above Methods: Reformat Your SD Card and Don't Give Up
This is less likely, but it's a problem I and a few others have run into on occasion: sometimes your SD card just gets corrupted, which makes the above methods useless (since they rely on your SD card to work). Take your SD card out of your phone, put it into your computer using an SD card reader, and format it. It's very important that you format it through an SD card reader directly and not by plugging in your phone in USB mode—I learned this the hard way. Format it as FAT32 and try the above methods again.
Other errors, like during the ROM flashing process, might give you a hint as to what's wrong. Try heading to the XDA Developers forums and asking for help, as your phone could have one of a million specific problems we can't address here today. Remember, if your phone turns on, there's still a good chance you can recover from whatever error you're experiencing, so don't give up just yet!
Click to expand...
Click to collapse
If Your Phone Is Truly Bricked: Take It Into the Store and Play Dumb
If your phone is actually bricked—that is, it won't turn on at all, no matter how hard you try—it's time to give up and move on. The first thing you can do in this situation is try to take it back to your carrier's store and play dumb—just say something like "I don't know what happened, but my phone won't turn on anymore" (don't tell them you rooted it, obviously). Most carriers don't have time to deal with such issues and they'll just give you a new phone. Sure, it's a tad evil, but it should work most of the time.
If they're wise to your act, though, you can try another store or just sell your bricked phone for a few bucks on Craigslist. Sadly, if no one will replace your phone, you'll have to buy an entirely new one. Such are the dangers of rooting, but don't be discouraged! Bricking your phone is pretty rare, so I wouldn't worry about it being a common occurrence. As always, though, when you void your warranty, only do so if you're ready to replace that device completely, since you never know what can happen.
Click to expand...
Click to collapse
Source::Lifehacker
Bump
Sent from my GT-I9103 using xda app-developers app
So you're bumping a thread full of info you lifted from another site word for word ? Classy.
(That you've gave credit is irrelevant, you could just as easily have posted a link somewhere, and this stuff has been posted here thousands of times before already)
MistahBungle said:
So you're bumping a thread full of info you lifted from another site word for word ? Classy.
(That you've gave credit is irrelevant, you could just as easily have posted a link somewhere, and this stuff has been posted here thousands of times before already)
Click to expand...
Click to collapse
Wouldn't that be irrelevant? I start a thread and just post links?
Sent from my GT-I9103 using xda app-developers app
Please delete.
What if it boost into CWM recovery but none of the options work? And Odin won't recognize the device because of driver issues?
Tha TechnoCrat said:
People asked me Hey TechnoCrat,
Rooting my Android phone went well, but I've tried to flash a custom ROM and now I think I've bricked my phone. Is there anything I can do?
…
First of all, lets get something straight. Most people use the term "bricked" improperly. A bricked phone means one thing: your phone won't turn on in any way, shape or form, and there's nothing you can do to fix it. It is, for all intents and purposes, as useful as a brick. A phone stuck in a boot loop is not bricked, nor is a phone that boots straight into recovery mode. These are things you can usually fix, and they're a lot more common than a truly bricked phone. If your phone is actually bricked, you won't be able to fix it yourself (but there are things you can do—see the end of this article). For those other problems, you have a few options.
If Your Phone Keeps Rebooting: Wipe Your Data and Cache
How Do I Fix My Bricked Android Phone?
With any luck, it should boot right into your ROM. If that didn't work, try the below method with the same ROM (or with a different ROM) and see if you get different results.
If Your Phone Boots Straight Into Recovery: Flash a New ROM
How Do I Fix My Bricked Android Phone?
If Your Phone Boots Straight Into its Bootloader: Restore From a Stock ROM
If You Get Errors with Any of The Above Methods: Reformat Your SD Card and Don't Give Up
If Your Phone Is Truly Bricked: Take It Into the Store and Play Dumb
Source::Lifehacker
Click to expand...
Click to collapse
keltaurn said:
What if it boost into CWM recovery but none of the options work? And Odin won't recognize the device because of driver issues?
Click to expand...
Click to collapse
yeah, i have the same problem
http://forum.xda-developers.com/showthread.php?p=51582800 is my thread related to this (NEED HELP)
keltaurn said:
What if it boost into CWM recovery but none of the options work? And Odin won't recognize the device because of driver issues?
Click to expand...
Click to collapse
I got it fixed long ago, just try other computer and different cable (just in case)
Hope this helps
Hit thanks if I helped you sent from my SM-T211 using XDA Free mobile app
boot loop, no boot logo.
the phone keeps rebooting but no boot logo. just the "Samsung Galaxy S4 GT-i9500"
i was just sending an SMS, and suddenly my phone rebooted.
whenever i put my battery back. the phone turns on automatically and wont stop looping.
tried to boot into recovery and DL mode, but nothing, just keeps looping.
i have CM 11 (4.4.2)
lasmaty07 said:
the phone keeps rebooting but no boot logo. just the "Samsung Galaxy S4 GT-i9500"
i was just sending an SMS, and suddenly my phone rebooted.
whenever i put my battery back. the phone turns on automatically and wont stop looping.
tried to boot into recovery and DL mode, but nothing, just keeps looping.
i have CM 11 (4.4.2)
Click to expand...
Click to collapse
It's not rom related. It's a phisical problem, problably it's a broke power button, or faulty battery.
misterG33 said:
It's not rom related. It's a phisical problem, problably it's a broke power button, or faulty battery.
Click to expand...
Click to collapse
thanks for the answer.
luckily it was still under warranty, (despite having CM 11, they do not check those thing here in argentina) took it to my carrier and they changed the POWER button.
Tha TechnoCrat said:
Bump
Sent from my GT-I9103 using xda app-developers app
Click to expand...
Click to collapse
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Removed!!
i tried flashing the pit file but failed
gt i9505(TCL) plz help!!!!!!!!!!!!
I bricked my rca 4.1 android phone shaped like a galaxy s3 i cant seem to get off the logo screen please help thank you
Sent from my LGL86C using XDA Free mobile app
Softbricked Samsung galaxy grand prime SM-G530R4
Can some one plz plz plzzz help me.
i softbricked my phone and Kies 3, and smart switch is not working i tried odin
but it always gets stuck on NON-HLOS.bin
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G530R4TYU1AOF5_G530R4USC1AOF5_G530R4TYU1AOF5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> hyp.mbn
<ID:0/003> NON-HLOS.bin
Hello, I have a MediaTek device (Android 9, Lenovo Tab M8 FHD) I had it updated to Android 10 and in the process of trying to downgrade it to 9, I bricked it..badly....The indicator still responds to power buttons and plugging it in, but I cannot access recovery or fastboot. Is this tablet a goner or is there any fix?
I was stuck in a bootloop after flashing AOSP rom. So I decided to power off and use SPFlashTool to flash the stock rom. But both SP and Techno flash tools give the following error:
ERROR : STATUS_BROM_CMD_STARTCMD_FAIL (-1073348607) , MSP ERROE CODE : 0x00.
The phone doesn't respond to any button presses however whenever I connected it with my PC, the charging indicator glows and even windows can detect it, and the device is listed in ports.
Can anyone please help.
Device is Infinix Hot 8.
TIA.
i have a cricket Dream 5G phone nd it went brick it literaly says ´´your device is corrupted and is not trusted and may not work properly please visit link 9.co/ABH on another device
My phone is stuck in bootloop after I flashed an unofficial twrp img on my phone. I`ve tried a couple of things; factory data resetting adb fastboot through command [fastboot -w] I also relocked my bootloader and when I tried re-booting it showed a message; your device has failed verification and may not work properly. Whilst also asking me to install the correct boot img file for the phone, of course I`d already done that. after a sometime while I was trying multiple things a command failed due to low battery. Is there any way to fix this? My device of course is very unpopular; Ulefone note 7p, Kindly help.
I'm hoping someone can help me. I'm stuck travelling and my phone just crapped out. I'm not sure if it something to do with the ROM, but I was recording video and then all of a sudden the phone just rebooted and got stuck on the first screen. When I would normally reboot, i'd see a lock and it'd boot into the OS, but now it just says Samsung Galaxy s5 and its stuck.
I'm hoping someone can point me to the first step I need to do to recover it. I can't even get into recovery mode using the home key, power and volumen button. It just says Recovery Booting... and is just sitting there.
So I was able to get into Maintenace Mode. Not sure what to do from here to to recover or do a fresh install.
I REALLLLYY appreciate any help you guys can provide!!
Not sure if it matters, but i'm on the latest MOAR ROM (OC4)
If it's really that urgent, you might have to take it to the Verizon store #shudder#
Verizon won't do anything..I bought this off of craigslist.
So I've been successful at getting to the 'Downloading...' screen to make Odin work. I've so far flashed the NK2 Kernel successfully, but when I try to flash the NK2.tar I consistently fail:
<OSM> ALL_VZW_G900VVRU1ANCG_G900VVZW1ANCG_964333_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> aboot.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007> sbl1.mbn
<ID:0/007> rpm.mbn
<ID:0/007> tz.mbn
<ID:0/007> sdi.mbn
<ID:0/007> NON-HLOS.bin
<ID:0/007> boot.img
<ID:0/007> recovery.img
<ID:0/007> system.img.ext4
<ID:0/007> FAIL! (Auth)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
I can't get past it, even after trying to flash different NXX .tars. I've tried two different computers, and different cables. I've tried Odin 3.10, 3.09 and 3.07
Suggestions please????
flashhsalf said:
Verizon won't do anything..I bought this off of craigslist.
Click to expand...
Click to collapse
That doesn't matter, if your service is through them, they can fix it.
I get the impression that it wasn't as urgent as you led to believe, since your initial post was days ago. You REALLY just wanted people to help you immediately...
ldeveraux said:
That doesn't matter, if your service is through them, they can fix it.
I get the impression that it wasn't as urgent as you led to believe, since your initial post was days ago. You REALLY just wanted people to help you immediately...
Click to expand...
Click to collapse
It was urgent at the time when I asked for help, but I got by using email to contact people that I needed because I had no choice.
I wasn't trying to dupe anyone to help me, I was in panic because I had no idea where to start while waiting for my flight. I didn't sit on my ass waiting for help either. I went and scoured the web for instructions on how to restore the phone and the last post is as far as I've gotten.
Thanks for your help btw.
flashhsalf said:
It was urgent at the time when I asked for help, but I got by using email to contact people that I needed because I had no choice.
I wasn't trying to dupe anyone to help me, I was in panic because I had no idea where to start while waiting for my flight. I didn't sit on my ass waiting for help either. I went and scoured the web for instructions on how to restore the phone and the last post is as far as I've gotten.
Thanks for your help btw.
Click to expand...
Click to collapse
Can you get to download mode to ODIN a ROM?
ldeveraux said:
Can you get to download mode to ODIN a ROM?
Click to expand...
Click to collapse
Yes, that is what i've been trying with Power+Vol Down+Home Key, I leave everything default and then add the .tar in the AP field. Few posts about other Samsung phones mention that i need to add some files in the BL, CP, CSC, field, but not sure if that applies to our S5.??
i've downloaded almost all of the Stock_Restore.tar files from this thread: (http://forum.xda-developers.com/showthread.php?t=2784880) and I've also tried the Stock_Retail.tar but they all fail at with the error in ODIN. After the error, I reboot but I can't get to the Samsung S5 screen. I get bootlooped into the ODIN screen saying firmware got corrupted, so with another attempts to reset, battery pull etc, I get to the normal ODIN screen and If I flash a Firmware, only then do I get to the Samsung S5 screen, but then nothing.
What I am not clear about is do I need to install the Retail Firmware or the Modem or the Kernel individually? Or do I just flash the Stock_Restore.tar as it has all of those files in it already.
Few times I was able to get ODIN to flash the rom tar without any errors not sure what changes I made, but it would then just sit on the Samsung Galaxy screen and not do anything.
Second time, I got Recovery Booting on the top left of the screen and then it'd just sit there. I tried to get into the Recovery Menu, but nothing would happen.
So I've just been trying to flash differnt combination of Firmware and stock Rom.tar files hoping something would stick, but i feel like i'm running in circles.
I've tried to get Kies 3 to work, but why samsung doesn't list the serial number on the S5 and then ask for it in their software is beyond me. I've tried Smart Switch, but it doesn't support our phone and i get stuck with the same are where I need the Serial Number. :/
You're in over your head, and for some reason, you refuse to go to the source to get this fixed. If you won't listen to advice on where to get help, I'm afraid I can't help you.
Which build were you running before the phone crashed? This may be applicable to you but you must have been on a build before BOC4.
Flash this. Unzip the file and you'll find a large file that ends in tar.md5
Open Odin (Doesn't matter which verion as long as it's higher than 3.09)
Click the button that says 'AP' and flash it.
Wait for the com-slot to go first blue then green and eventually say "PASS!!".
You should now have Stock NCG KitKat running on your SM-G900V
Quigly said:
Which build were you running before the phone crashed? This may be applicable to you but you must have been on a build before BOC4.
Flash this. Unzip the file and you'll find a large file that ends in tar.md5
Open Odin (Doesn't matter which verion as long as it's higher than 3.09)
Click the button that says 'AP' and flash it.
Wait for the com-slot to go first blue then green and eventually say "PASS!!".
You should now have Stock NCG KitKat running on your SM-G900V
Click to expand...
Click to collapse
I was on MOAR's OC4 ROM and i've tried what you have suggested and after I get the 'PASS!" and the system reboots, it never leaves the 'Samsung S5' screen. It'll stay there for hours. I then try to enter Recovery and I'll get the Recovery Booting on the top left of the screen in blue ..... and then it'll just stay there as well. I think something got corrupted and can't be overwritten with ODIN.
Where is the recover image located? In the bootloader? The menu which you see after you hit the Power + Vol UP+ Home?
Thanks for your suggestions, i do appreciate you trying.
ldeveraux said:
You're in over your head, and for some reason, you refuse to go to the source to get this fixed. If you won't listen to advice on where to get help, I'm afraid I can't help you.
Click to expand...
Click to collapse
Isn't everyone in over their head when they try to fix their phone for the first time with so much information scattered all over web forums and then multitude of exception about which rom and which firmware to install? Needless to say I took your advice and went to the Verizon store and they said what I excepted, Its not their problem, I need to take it to Samsung. I then found a Samsung support place at Best Buy and he pretty much said, because it said System Status: Custom , he can't plug it into his computer. So yea, not much help there, but thanks for your suggestions.
flashhsalf said:
Where is the recover image located? In the bootloader? The menu which you see after you hit the Power + Vol UP+ Home?
Thanks for your suggestions, i do appreciate you trying.
Click to expand...
Click to collapse
The recovery and boot.img files are in the ROM and/or tar.md5 package when you flash them.
Have you tried flashing the stock OC4 roms or just the firmware maybe?
When you flash a full tar.md5 with the MULTI CERT (bootloader FW) that should take care of your problem because that should overwrite any file system in place.
flashhsalf said:
I was on MOAR's OC4 ROM and i've tried what you have suggested and after I get the 'PASS!" and the system reboots, it never leaves the 'Samsung S5' screen. It'll stay there for hours. I then try to enter Recovery and I'll get the Recovery Booting on the top left of the screen in blue ..... and then it'll just stay there as well. I think something got corrupted and can't be overwritten with ODIN.
Where is the recover image located? In the bootloader? The menu which you see after you hit the Power + Vol UP+ Home?
Thanks for your suggestions, i do appreciate you trying.
Click to expand...
Click to collapse
Have you been able to resolve this issue or are you still stuck? I posted again to your questions just above this post. Basically what I'm saying is that you have a corrupt file that you're trying to flash or you have the incomplete version of the one you really need. This post http://forum.xda-developers.com/showthread.php?t=2784880 should steer you in the right direction if you still have quetions or you just PM me.
Make sure you're not trying to downgrade the bootloader. If you had BOE1 or later, an attempted flash of anything earlier than that will always fail because the bootloader was irrevocably locked.
You do not need to flash all of the components (modem, etc) in any combination. Just grab a full stock recovery image, and it contains everything you need. You can tweak with different modem versions later, but for right now focus on getting your phone working.
Make sure you're checking the md5 of the image you downloaded. A corrupted download will always fail to flash.
After successfully flashing with Odin, boot into stock recovery and clear the cache. If that doesn't work, boot back into stock recovery and also do "factory reset" to wipe out any remnants. (I wouldn't think this would do anything since flashing is supposed to wipe out everything, but it's worked for me on several occasions when stuck on the logo screen).
Read this to get yourself up to speed: http://forum.xda-developers.com/verizon-galaxy-s5/general/guide-painiacs-essential-guide-to-t3319848
im new to this but here it goes i flashed g935aucu4bqa6_Recovery using odin 3.12 and it got my phone out of a bootloop but when it boots up it says installing system update then goes through erasing then it states no command so i press power and volume up to go into recovery then i press wipe catch then it reset it boots samsung and AT&T logo then says Device storage corrupt so i reboot back into recovery and i go to factory reset and it stops and says e:format_volume; make ext4 failed on /dev/block/bootdevice
is there anything i can do i even took it to bestbuy and the guy said it wont put the stock on there maybe cause its rooted i also tried to load stock back onto it and it failed with new cord and different usb ports
ANY HELP would be appreciated
Lazyleperchaun said:
im new to this but here it goes i flashed g935aucu4bqa6_Recovery using odin 3.12 and it got my phone out of a bootloop but when it boots up it says installing system update then goes through erasing then it states no command so i press power and volume up to go into recovery then i press wipe catch then it reset it boots samsung and AT&T logo then says Device storage corrupt so i reboot back into recovery and i go to factory reset and it stops and says e:format_volume; make ext4 failed on /dev/block/bootdevice
is there anything i can do i even took it to bestbuy and the guy said it wont put the stock on there maybe cause its rooted i also tried to load stock back onto it and it failed with new cord and different usb ports
ANY HELP would be appreciated
Click to expand...
Click to collapse
How long did you wait after you had information "Erasing"? My phone took good 2-3 min to start after. Pay attention to blue light if it is blinking after. I think you need to ODIN firmware with pit file.
On Edge of Galaxy
wait time
norbarb said:
How long did you wait after you had information "Erasing"? My phone took good 2-3 min to start after. Pay attention to blue light if it is blinking after. I think you need to ODIN firmware with pit file.
On Edge of Galaxy
Click to expand...
Click to collapse
it went in and out of updating then erasing there was no blue led indicator then it booted to data file corrupt I used the pit file as well and I'm sure that's what helped it out of a bootloop
Lazyleperchaun said:
it went in and out of updating then erasing there was no blue led indicator then it booted to data file corrupt I used the pit file as well and I'm sure that's what helped it out of a bootloop
Click to expand...
Click to collapse
Seems like your hardware is damage. You may try another firmware like t-mobile or combination files, even i would try download different build of AT&T firmware. If this not going to help it is phone it self.
sm-g935U
norbarb said:
Seems like your hardware is damage. You may try another firmware like t-mobile or combination files, even i would try download different build of AT&T firmware. If this not going to help it is phone it self.
Click to expand...
Click to collapse
i tried G935U and t failed with this
<ID:0/007> userdata.img.ext4
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1
Lazyleperchaun said:
i tried G935U and t failed with this
<ID:0/007> userdata.img.ext4
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1
Click to expand...
Click to collapse
Looks like you phones flash memory is damage. But like i said try different firmware.
I have a G950FD, which I changed CSC on (from SIN to XEU), and this worked fine. Wifi calling was not available, so I decided to just flash the BTU firmware instead. I followed instructions on sammobile website (I specified the AP file, but not the others, as per instructions and did NOT select Re-partition), using odin 3.12.7 and the flash went through. However after reboot, it is stuck at the boot screen (just shows Samsung Galaxy S8 in white text, with Powered by android on bottom in white too). I tried to reboot into recovery mode to do a wipe and format but I cannot boot into recovery.
- I am unable to turn the phone off (holding power in does not force it to shut down)
- I am unable to boot into Recovery (holding VolUp + Bixby + Power does nothing, no matter what is showing on screen)
- I AM able to reboot phone with VolDown + Power
- I AM able to boot into Download mode with VolDown + Bixby + Power
- Phone is NOT rooted and KNOX is 0x0
- Phone had standard firmware and boot and recovery on it when I flashed BTU firmware
I tried to reflash again, and it reports following and then reboots -
<ID:0/005> Odin engine v(ID:3.1207)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> FAIL! (DeviceInfo)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
I have tried holding various button combinations when I click start in Odin, but the same result every time (error as above, and reboot, and stuck at boot screen)
I tried to use Smart Switch and it's emergency initialization option but this goes through the motions of asking for model and serial and then downloading the Firmware, and then it starts the process of writing the firmware, but after showing no progress on progress bar, the phone reboots (and gets stuck boot screen) and Smart Switch reports a failure, telling me to try again.
Am I correct that this phone seems to no longer have a Recovery partition ? All instructions keep telling me to switch off the phone and then go into download / recovery / whatever, but I am unable to shutdown the phone, I can ONLY reboot it or reboot into Download mode.
Is this phone now a useless brick ?
I have your exact same issue, I think the issue originated because we did not flash csc/bl/cp the second time, not sure. The issue seems specific to the S8, unable to find anything online.
The first time I brick a device and it had to be my s8, FeelsBadMan.
Were you able to figure out anything?
I left the phone overnight to drain and turn off, which it did. As soon as I plugged in charger, it went straight back to boot screen without me even touching the power button.
Still no luck in doing anything other down going to boot screen or Download mode.
Anyone got any bright ideas ? I'm pretty much willing to try ANYTHING to get this phone working again. I don;t care about the data on the phone, just want it working.
Just realized that the AP I flashed with Odin was earlier than what was on there, as the phone updated itself to AQG5 when it was set to CSC of XEU. I'm going to download the XEU AQG5 firmware and try to flash that to see if it helps.
Nope - same problem.
Hello,
I had flashed AQG5 firmware and was having the same issue for last 4 days. i.e. Stuck on boot screen showing Galaxy S8 screen. Unable to boot into recovery as well.
I just now flashed AQF7 via odin and now it working fine
I flashed AP, BL, CP, & CSC files
priyank500 said:
Hello,
I had flashed AQG5 firmware and was having the same issue for last 4 days. i.e. Stuck on boot screen showing Galaxy S8 screen. Unable to boot into recovery as well.
I just now flashed AQF7 via odin and now it working fine
I flashed AP, BL, CP, & CSC files
Click to expand...
Click to collapse
Which version of ODIN did you use ? Also, did you flash CSC or HOME_CSC ?
- EDIT - I just noticed that the FW I flashed that got me into this mess WAS AQF7 already. Reflashing it does nothing
I flashed CSC.
To avoid that FAIL issue in Odin just hold bixby+volume down+power buttons right after clicking start(you should be fast ) and release them when the "BOOT" stage is complete(it's one of the first stages so you won't have to to perform that fingers trick for long). If you hold buttons too long it will fail again.
And also leave the default settings in Odin. And use all files, not just AP but also BL and others(can't remember them all) and use CSC, not HOME_CSC. It will wipe all your data but in your case I recommend doing so.
As long as you are able to boot into recovery or download mode your phone is not bricked. So don't worry, there's always a way to bring the phone back to life.
nikonazaroff said:
To avoid that FAIL issue in Odin just hold bixby+volume down+power buttons right after clicking start(you should be fast ) and release them when the "BOOT" stage is complete(it's one of the first stages so you won't have to to perform that fingers trick for long). If you hold buttons too long it will fail again.
And also leave the default settings in Odin. And use all files, not just AP but also BL and others(can't remember them all) and use CSC, not HOME_CSC. It will wipe all your data but in your case I recommend doing so.
As long as you are able to boot into recovery or download mode your phone is not bricked. So don't worry, there's always a way to bring the phone back to life.
Click to expand...
Click to collapse
Must I hold the buttons and then click Start, or click start and then hold the buttons ? When you say " release them when the "BOOT" stage is complete" what do you mean? as soon as I click Start, it shows the following and then reboots the phone and goes immediately to the Samsung logo and stays there -
<ID:0/005> Odin engine v(ID:3.1207)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> FAIL! (DeviceInfo)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
Also, I assume that you are saying I must go into download mode (bixby+volume down+power) connect to pc and load odin and then select all the files. then click Start and then very quickly press "bixby+volume down+power" AGAIN to go back into download mode ? Is this BEFORE the phone restarts, or after ?
OK. Had this same problem and got it to work. Here is what I did:
- Odin 3.12.5
- Image: G950FDXXU1AQE5_OXM1AQE5_India_7.0
1 - Went into Download mode with the Power+Bixby+VDown
2 - Selected BL+AP+CP+CSC (pretty much replace all) in Odin
3 - before I hit start, press the Power+Bixby+VDown and continued to hold.
4 - Press Start - and I get the same error and phone reboots - keep holding down.
5 - Comes back up in Download mode, let go and select download mode again.
6 - once in download, press down and hold the Power+Bixby+VDown and hit start on Odin again (yes ,same as above).
7 - it should start loading the image. Once it starts, let go of the buttons or the phone will reboot again and kill it.
Basically, it fails once then imaged on the second time. If you let it get to the samsung screen between download screens, you just have to start over.
After that, it was fine. Had quiet a scare on this one.
dmcnall said:
OK. Had this same problem and got it to work. Here is what I did:
- Odin 3.12.5
- Image: G950FDXXU1AQE5_OXM1AQE5_India_7.0
1 - Went into Download mode with the Power+Bixby+VDown
2 - Selected BL+AP+CP+CSC (pretty much replace all) in Odin
3 - before I hit start, press the Power+Bixby+VDown and continued to hold.
4 - Press Start - and I get the same error and phone reboots - keep holding down.
5 - Comes back up in Download mode, let go and select download mode again.
6 - once in download, press down and hold the Power+Bixby+VDown and hit start on Odin again (yes ,same as above).
7 - it should start loading the image. Once it starts, let go of the buttons or the phone will reboot again and kill it.
Basically, it fails once then imaged on the second time. If you let it get to the samsung screen between download screens, you just have to start over.
After that, it was fine. Had quiet a scare on this one.
Click to expand...
Click to collapse
Progress sort of......
Before doing this, I reinstalled Device drivers in Smart Sqitch
I then did the steps above, up to and including click Start for first time. It loaded firmware without fail message. Surprised, I let go of the buttons and let if finish. It reported the following -
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)The phone then rebooted and continued with post FW write procedure (I THINK it showed something about formatting or partitioniong)
It then rebooted and comes up with Installing System Update. This then goes to Error at about 6% and reboots and keep on showing Installing System Update.... 6% and Error and reboot
ARGH
Could this be because the battery is empty, and that when it is performing system update it does not charge, even though it is plugged into PC still ?
If I reboot into Download mode 'part 1' (but do NOT press VolUp when prompted, so do not go into actual download mode) and leave it connected to the charger that came with the phone, will this charge it ?
More progress !!
I plugged phone into charger while in Download Stage 1 mode, and then clicked VolDown to boot. It went to Installing System Update and then failed immediately, showing Error. Progress bar went up to 10% and it then went into Recoveyr mode. It is sat in Recovery mode at this time and I am leaving it there till I get some guidance.
What should I do ?
Wipe cache and format and reboot?
Leave it in recovery for an hour to charge and then go back into Download and reflash? If I do this, is it ok to leave phone connectedto PC when ODIN finished flashing and it reboots, or should I disconnect as soon as it reboots after flash (and then maybe plug into floor charger just to be safe) ?
The information on the bottom of recovery screen show the following (as per picture below)
Support SINGLE-SKU
Supported API: 3
-- Installing package...
Finding update package...
Opening update package...
E:failed to map file
-- meminfo...
Installation aborted. #2
-- omc_binary_download...
-- Deleting selective files
Successfully deleted files selectively
-- Deleting RSU selective file
Successfully deleted RSU selective file
-- omc-app-link...
[amazon_link] mismattached carrierID(-1015403757)
FINALLY got the phone to work. I wiped cache and formatted in recovery mode and then rebooted. Phone started as if I had just done a Factory reset. Strangely, the firmware on the phone is AQF7 and CSC's report as XEU/XEU/XSP. It seems like the entire firmware flash process has not happened and all that happened is a Factory reset...
I'm not complaining... at least the phone is working now. What I will do is leave it as is and only try going a CSC change using *#272*IMEI# (as this is how I got it into XEU) to get it to BTU CSC. If wifi calling still doesn;t work, then I'm leaving phone as is. I've been flashing galaxy phones for years now and this is the first time I have 'near bricked' my phone, so I'm going to leave it as is !!
Thanks for all the help everyone
nikonazaroff said:
To avoid that FAIL issue in Odin just hold bixby+volume down+power buttons right after clicking start(you should be fast ) and release them when the "BOOT" stage is complete(it's one of the first stages so you won't have to to perform that fingers trick for long). If you hold buttons too long it will fail again.
And also leave the default settings in Odin. And use all files, not just AP but also BL and others(can't remember them all) and use CSC, not HOME_CSC. It will wipe all your data but in your case I recommend doing so.
As long as you are able to boot into recovery or download mode your phone is not bricked. So don't worry, there's always a way to bring the phone back to life.
Click to expand...
Click to collapse
Thanks a bunch, any idea why this error occurs? Seems really weird...
uberNoobZA said:
Must I hold the buttons and then click Start, or click start and then hold the buttons ? When you say " release them when the "BOOT" stage is complete" what do you mean? as soon as I click Start, it shows the following and then reboots the phone and goes immediately to the Samsung logo and stays there -
<ID:0/005> Odin engine v(ID:3.1207)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> FAIL! (DeviceInfo)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
Also, I assume that you are saying I must go into download mode (bixby+volume down+power) connect to pc and load odin and then select all the files. then click Start and then very quickly press "bixby+volume down+power" AGAIN to go back into download mode ? Is this BEFORE the phone restarts, or after ?
Click to expand...
Click to collapse
You should start holding the buttons just right after you press START in Odin(you should be already in download mode of course), really you should start holding those buttons right in the next moment after you click START in Odin, so you must do it really fast. It should avoid that FAIL issue in Odin and proceed to further installation of the firmware. As soon as it finishes flashing BOOT, release those buttons(as I said BOOT is one of the first stages so you will have to release the buttons after a second or two), if you keep holding them it will fail again and it will also fail if you start holding them before you press START or if you start holding them too late. Yes, we are using this combination to go to the download mode but in this case it won't do that, it should allow you to avoid that FAIL at the start of flashing process.
Hope this will help you.
nikonazaroff said:
You should start holding the buttons just right after you press START in Odin(you should be already in download mode of course), really you should start holding those buttons right in the next moment after you click START in Odin, so you must do it really fast. It should avoid that FAIL issue in Odin and proceed to further installation of the firmware. As soon as it finishes flashing BOOT, release those buttons(as I said BOOT is one of the first stages so you will have to release the buttons after a second or two), if you keep holding them it will fail again and it will also fail if you start holding them before you press START or if you start holding them too late. Yes, we are using this combination to go to the download mode but in this case it won't do that, it should allow you to avoid that FAIL at the start of flashing process.
Hope this will help you.
Click to expand...
Click to collapse
What do you mean by BOOT, I don't see anything that says BOOT
---------- Post added at 07:26 PM ---------- Previous post was at 06:57 PM ----------
uberNoobZA said:
Progress sort of......
Before doing this, I reinstalled Device drivers in Smart Sqitch
I then did the steps above, up to and including click Start for first time. It loaded firmware without fail message. Surprised, I let go of the buttons and let if finish. It reported the following -
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)The phone then rebooted and continued with post FW write procedure (I THINK it showed something about formatting or partitioniong)
It then rebooted and comes up with Installing System Update. This then goes to Error at about 6% and reboots and keep on showing Installing System Update.... 6% and Error and reboot
ARGH
Could this be because the battery is empty, and that when it is performing system update it does not charge, even though it is plugged into PC still ?
If I reboot into Download mode 'part 1' (but do NOT press VolUp when prompted, so do not go into actual download mode) and leave it connected to the charger that came with the phone, will this charge it ?
Click to expand...
Click to collapse
I can see to get this to work...what magic did you do? I cant seem to follow the second part of the restart because the SW_REV_CHECK_FAIL is on the phone's screen and so the Start button on Odin won't click and start.
UberNoobZA how did you go on recovery mode? After SUCCESSFULLY flashing it with CRI5, my device is stuck on Samsung Logo SM-G950F and i can go to download mode, but i CANNOT go to recovery mode (VolUP+Bixby+Power)
From what I can remember, I followed information in post 17 above by nikonazaroff