Can't flash stock firmware on my Note 4 (910C) - Galaxy Note 4 Q&A, Help & Troubleshooting

Hi everyone, my Galaxy Note 4 is running a aosp rom (one like CM13) and I don't know how to go back to stock. I tried before installing this but it was saying the firmware is corrupted while i was extracting the md5 file but i kept going and then the phone wasn't turning on (it was stuck on the 'Samsung Galaxy Note 4' message) so I had to root it again and install this rom. With touchwiz roms i get bootloop if i try to restart the phone so I only have this right now. Please somebody can help me with this one?

GalaxyNote4 <3;68216840 said:
Hi everyone, my Galaxy Note 4 is running a aosp rom (one like CM13) and I don't know how to go back to stock. I tried before installing this but it was saying the firmware is corrupted while i was extracting the md5 file but i kept going and then the phone wasn't turning on (it was stuck on the 'Samsung Galaxy Note 4' message) so I had to root it again and install this rom. With touchwiz roms i get bootloop if i try to restart the phone so I only have this right now. Please somebody can help me with this one?
Click to expand...
Click to collapse
I meant with the stock touchwiz rom via odin I get bootloop after it restarts from the process.

Related

[Q] HELP!!!! note 3 bootloop

Hello everyone,
i am fairly new to the world of rooting and recently encountered a problem while flashing a rom
i have the at&t samsung galaxy note 3 N-900A running 4.3 jellybean (2 year contract expired and i got and used the unlock code)
i rooted the phone using the kingo root app, because i could not update the phone (I recently moved out of the USA so i cant connect to an at&t server to update)
i installed safestrap recovery 3.71 and it was running fine
i found a tutorial from galaxy note 3 root for the knoxraid ro
(put youtube. c o m here) /watch?v=8HDHt4xSnQY
according to the tutorial i had to install the rom over the stock rom file
so i copied the stock rom to rom slot 1
this is where i messed up, i installed the knoxraid rom over the stock rom without wiping/data factory reset first. But it gets worse, i realized i forgot to wipe the data from safestrap so before the install was even halfway completed, i pulled the battery out.
now whenever i turn it on it will go straight to recovery mode
it wont even turn off. i have to pull the battery out.
i can get to download mode and recovery mode but thats it.
im not sure about the build number because it wont boot up
all i can tell you is it is a at&t note 3 running 4.3 jellybean
please help if you can
btw: my computer wont recognize the phone because it says the PHONE does not have the correct drivers installed
however odin still recognizes it with the blue box with 0:[COM6] if that helps
so yeah please help me the phone is fairly new and i dont want to waste $600
infinitephase said:
Hello everyone,
i am fairly new to the world of rooting and recently encountered a problem while flashing a rom
i have the at&t samsung galaxy note 3 N-900A running 4.3 jellybean (2 year contract expired and i got and used the unlock code)
i rooted the phone using the kingo root app, because i could not update the phone (I recently moved out of the USA so i cant connect to an at&t server to update)
i installed safestrap recovery 3.71 and it was running fine
i found a tutorial from galaxy note 3 root for the knoxraid ro
(put youtube. c o m here) /watch?v=8HDHt4xSnQY
according to the tutorial i had to install the rom over the stock rom file
so i copied the stock rom to rom slot 1
this is where i messed up, i installed the knoxraid rom over the stock rom without wiping/data factory reset first. But it gets worse, i realized i forgot to wipe the data from safestrap so before the install was even halfway completed, i pulled the battery out.
now whenever i turn it on it will go straight to recovery mode
it wont even turn off. i have to pull the battery out.
i can get to download mode and recovery mode but thats it.
im not sure about the build number because it wont boot up
all i can tell you is it is a at&t note 3 running 4.3 jellybean
please help if you can
btw: my computer wont recognize the phone because it says the PHONE does not have the correct drivers installed
however odin still recognizes it with the blue box with 0:[COM6] if that helps
so yeah please help me the phone is fairly new and i dont want to waste $600
Click to expand...
Click to collapse
Well, this is the wrong forum to begin with.
However, head over here, http://forum.xda-developers.com/showthread.php?t=2703006 , and read very, very carefully.
sirobelec said:
Well, this is the wrong forum to begin with.
However, head over here, http://forum.xda-developers.com/showthread.php?t=2703006 , and read very, very carefully.
Click to expand...
Click to collapse
sorry, next time ill post in the right forum
thanks for the link, however this appears to be for the N900AUCUCNC2 variant, which i believe is KitKat (sry if im wrong) i need files for 4.3 jellybean firmware. (i never updated)
thanks in advance

Phone won't boot anymore

HI guys. I have a bit of an issue with my phone.
It's the Sprint variant of the Galaxy Note 3 and I had been running Temasek's CM12 build on it. However, I wanted to try Sacs S6 port that was posted over at the Sprint Galaxy Note 3 forum.
I flashed it, but now when I try to load it, it gets stuck on the Samsung loading screen.
I tried to restore my phone back to the backup I made right before I flashed it but when I do that my phone shows the Galaxy Note III screen then turns black and nothing happens.
Any advice would be very appreciated. I'm very confused at the moment.
Sprint forum Q&A as its a different product .
Suggest recovery mounts and storage format system data cache preload .
Boot to download mode and flkash correct stock rom via Odin .
itzkpanda said:
HI guys. I have a bit of an issue with my phone.
It's the Sprint variant of the Galaxy Note 3 and I had been running Temasek's CM12 build on it. However, I wanted to try Sacs S6 port that was posted over at the Sprint Galaxy Note 3 forum.
I flashed it, but now when I try to load it, it gets stuck on the Samsung loading screen.
I tried to restore my phone back to the backup I made right before I flashed it but when I do that my phone shows the Galaxy Note III screen then turns black and nothing happens.
Any advice would be very appreciated. I'm very confused at the moment.
Click to expand...
Click to collapse
Try updating your boot loader to L one

Samsung galaxy s3 neo stuck on bootload after flash (PLEASE HELP ME)

Hello. So ill start from what i wanted to do and where i need help.
I wanted to put Cyanogenmod to my Samsung Galaxy s3 neo. But when i deleted data fro. The phone i also lost the ROM. So i lost the OS. Now i searched and i flashed my phone with stock firmware. All went well. But now when the phone started it stucks on samsung bootload logo. Some of my friends said try downloading another firmware. So i downloaded one. But i dont know when i want to extract the firmware with Winrar, it sops after 90% and says crc fail error, the file is corrupted. (I downloaded this file from sammobile.) Now what can i do. Please help me because i don't have any other phone.

Stuck with N9005

Hi all
I am a silent reader of this forum since long but for the first time I feel like as if I am in a real trouble. A couple of days ago I got a Note 3 International version N9005 Snapdragon from a friend. It was running on 4.3 rooted version so I tried to update it to 5.0 stock using odin (Sammobile UK BTU firmware). Something went wrong over there and i got a FAIL message from odin. There onwards I tried searching all over the web but couldn't bring it back to life. One thing I never tried and won't do it that is use of pit file for re-partitioning. Now at this moment it has got a CWM recovery 6.0.4.7-kk(0125) installed but whenever I even try to flash a custom rom, it installs successfully but after reboot i am stuck again samsung logo. I have tried using a few kk custom roms with no success and also tried flashing 4.3, 4.4.2 and 5.0 stock roms from odin with again no success. Now my aim is to bring this thing back to life. Kies 3 gives a message that your device is not compatible with this version of kies.
Waiting for some expert opinions, I am ready to start from the beginning.
Regards

Need Some ideas Note 4 rom bootloop

i was just using my note 4 on a rooted stock rom but then it turn off when i open it again it got stuck in the samsung galaxy note 4 powered by android
things ive done
flash stock rom via odin same version and lowered version of rom
flash twrp via odin not working also cant get to recovery mode
flash cf auto root via odin not working also
flash a recovery.img not working also
every odin flash i did was a pass but it wont take me anywhere else besides galaxy note 4 logo
so in summary i cant get to recovery or os even after flashing everything im just stuck in this samsung galaxy note 4 logo i can only to download mode nothing else anyone else have a suggestion
any suggestion is awesome thanks in advance
Same problem
I have the Snapdragon Duos version using this rom https://forum.xda-developers.com/no...eo-8-1-0-unofficial-lineage-15-1-rom-t3760969 and it got this peculiar problem of sim death. Basically when you restarted the phone to revive your sim, you got bootlooped. Couldn't get to recovery. either:crying:
I tried the things you tried and it was the same. Stuck on boot animation. No recovery.
Have you found a solution now? Anyone has any idea?
Guys, don't you know that the eMMC problem is a plague of the 910F models? Maybe that's the issue.
Get to read more on the Snapdragon threads about it.

Categories

Resources