[Tools, Tips & Tutorials] [kenzo] Entering EDL mode via Test Mode Screen - Xiaomi Redmi Note 3 Guides, News, & Discussion

[Tools, Tips & Tutorials] [kenzo]Entering EDL mode via Test Mode Screen
Who cannot enter EDL mode from standard Android boot and have no abilty to boot an image from FastBoot mode, you could try the following:
Switch the phone off.
Press and hold both Volume keys and Power key.
As Mi logo appears on the screen, release all buttons.
After several seconds, Test Mode Screen should appear (SYSTEM INFO, KEYPAD BACKLIGHT etc.).
Open Device Manager in Windows.
Connect the phone to the Windows computer (no matter which cable end is inserted first).
If ADB drivers are installed, "Android device" branch should appear in Device Manager, containing "Android Composite ADB Interface" and "Xiaomi Composite MDB Interface". Addionally, there should be "Portable devices" branch with "Redmi Note 3" device. If some drivers are not installed, install them.
Execute "adb devices" command to check if ADB connection is established.
If no devices are shown by ADB, wait a minute until "Redmi Note 3" device gets the "!" mark. Repeat "adb devices" command.
If "Redmi Note 3" device is not marked by "!" after a minute and ADB does not list the phone ID, try to disable "Redmi Note 3" in Device Manager.
As the phone ID becomes listed by ADB, execute "adb reboot edl" command.
Click to expand...
Click to collapse
Keep repeating "adb devices" until it reports connected.
Thought this deserves a thread of it's own. If anyone tried to get to EDL via volume buttons, will probably know how difficult it is.

not working

Redmi note 3 , screen on while put to charging, I tried to start mobile , by pressing Volumn + , volume - & Power buttons simultaneously, tried several times but unable to start mi note 3

Related

Can't find my device on adb devices

First of all, i tried to start my device Samsung galaxy E7 on download mode,
i couldn't start it trying (Home + Volume down + power button)
I tried to install ADB so i can't start the download mode using it,
But failed too,
Because i couldn't find my device on "ADB devices" command.
even thought i installed drivers but i can't find the Android device on device management (ADB Android interface)
I can't startup the device completely (I've little virus, so i can't go to settings to enable USB Debug) So guys if you can help me step by step, please.. I'm new in this community

getting into fastboot mode

I am trying to get into fastboot mode to unlock my bootloader. I enabled usb debugging, and allowed the oem unlock mode. when I press volume down and power button, i do not see "fastboot mode" anywhere. in device manager, my device shows up with a exclamation mark and triangle. I installed the google usb driver via sdk manager. when i type "fastboot devices" on my desktop, my 6p does not show up. how can I get this to work?
sniper8752 said:
I am trying to get into fastboot mode to unlock my bootloader. I enabled usb debugging, and allowed the oem unlock mode. when I press volume down and power button, i do not see "fastboot mode" anywhere. in device manager, my device shows up with a exclamation mark and triangle. I installed the google usb driver via sdk manager. when i type "fastboot devices" on my desktop, my 6p does not show up. how can I get this to work?
Click to expand...
Click to collapse
Holding power + volume down will get you to the bootloader, this is fastboot mode. Is the phone in this mode when issuing the "fastboot devices" command? Does Windows show any driver installation/update dialogue when you connect the phone in this mode?
Yes, it is.
I believe a driver installation popup came up before.
Heisenberg said:
Holding power + volume down will get you to the bootloader, this is fastboot mode. Is the phone in this mode when issuing the "fastboot devices" command? Does Windows show any driver installation/update dialogue when you connect the phone in this mode?
Click to expand...
Click to collapse
It also tells me to connect a usb data cable, when it's already plugged in.
So I found a usb driver, and it works now. Up to the point where I go into TWRP, but it asks for a password to decrypt the data. So I enter the password I use to get onto my phone, and it gets to "Unable to mount storage. Full SELinux support is available." Where do I go from here?
Are you using the Android N Dev Preview?

ADB works fine. Fastboot not working when on bootloader.

Hi!
So I've just received my Oreo 8.1 update. but before updating, I decided to backup my EFS/persist after some reading in this forum.
Turns out ADB works fine, "adb devices" shows my phone ID but when I reboot to booloader, fastboot doesn't work, it doesn't show my phone ID.
While on ADB mode:
On Windows 10 Device Manager, Moto G5 Plus is listed under Android Devive > Motorola ADB Interface. (Everything ok here, no exclamation mark, working as it should)
-While on fastboot mode:
Phone gets listed under "Other Devices" as "Fastboot Potter S" (exclamation mark inside a triangle)
Tried uninstalling/reinstalling motorola drivers but I always get: Windows found drivers for your device but encountered an error while attempting to install it."
-Moto G5 Plus (XT1683) - Stock, Nougat 7.0 ( NPNS25.137-92-14 )
-Debugging mode is enabled.
-When connected to the PC, If I change from Charging to Transfer Files, my phone doesn't show up as another drive where I can transfer files and also gets listed as MTP (Exclamation mark/Triangle) under "Other Devices"
-Windows 10. Updated.
Anyone has been through that? Any ideas, tips, solutions or workaround would be appreciated.
Use "Fastboot Reboot Bootloader" device will go to bootloader automatically without the need of switching off.

Auto power-on when plugging charger? (SM-T555)

I succesfully rooted my Tab A 9.7 LTE and installed MacroDroid to make it power off when the charger is unplugged.
However, I can't make it turn on when plugging in.
I read about it here and watched this, but I can't get the CMD to work with fasboot command. Looks like my PC does not recognise the tablet when it's in recovery menu, and when I choose "Reboot to bootloader" it just reboots to download mode.
Code:
adb devices
then works, but
Code:
fastboot
in any iteration does not

Question Nothing Phone 1 hard bricked (Edl Mode)

Hello there members.
i have a Nothing Phone 1 in Edl Mode. Tried to restart it but still connected on Edl. i have searched around for this problem but sill unlucky to find a solution.
Client pretend to have played with roms and flashed the wrong one.
Any help suggestion?
pogradecari said:
Hello there members.
i have a Nothing Phone 1 in Edl Mode. Tried to restart it but still connected on Edl. i have searched around for this problem but sill unlucky to find a solution.
Client pretend to have played with roms and flashed the wrong one.
Any help suggestion?
Click to expand...
Click to collapse
Try holding power+volup+voldown with the phone unplugged from a computer.
If it doesn't work, let me know.
how to boot to edl mode ??
Try this :
Install ADB and Minimal Fastboot drivers through which Windows will recognize your Device.
Enable USB Debugging on your Android Device. You can do this simply by following the given direction:
Settings > About Phone > tap 7 times on the Build Number. This will enable Developer options on it.
Now, again go back to the main Settings > Developer options > USB Debugging and Enable it.
Connect your smartphone with your PC via a USB cable.
Open Command Window by the press and hold Shift Key + right-click of your Mouse.
Choose Open Command Window here.
Type the following command and press the Enter button to check whether the device is connected or not.
" adb devices "
You will see a device serial code on the screen. That means it is successfully connected. Then follow the next step.
Type the command from below and hit enter to Boot into Download Mode (EDL Mode):
" adb reboot edl " or "fastboot oem edl" or "fastboot reboot-edl" or "fastboot reboot edl"
muppetz said:
Try this :
Install ADB and Minimal Fastboot drivers through which Windows will recognize your Device.
Enable USB Debugging on your Android Device. You can do this simply by following the given direction:
Settings > About Phone > tap 7 times on the Build Number. This will enable Developer options on it.
Now, again go back to the main Settings > Developer options > USB Debugging and Enable it.
Connect your smartphone with your PC via a USB cable.
Open Command Window by the press and hold Shift Key + right-click of your Mouse.
Choose Open Command Window here.
Type the following command and press the Enter button to check whether the device is connected or not.
" adb devices "
You will see a device serial code on the screen. That means it is successfully connected. Then follow the next step.
Type the command from below and hit enter to Boot into Download Mode (EDL Mode):
" adb reboot edl "
Click to expand...
Click to collapse
my phone is bricked while flashing stock rom via fastboot
so unable to boot to recovery or bootloader
To begin with, power off your device. If you can’t do so, then you will have to wait until the battery completely drains out.
Now connect one end of the USB cable to your PC, but don’t attach the other end to the device.
Press and hold the Volume Up and Volume Down buttons together for a few seconds.
Now connect the other end of the device to the USB cable.
Your device will now be recognized as Qualcomm HS-USB QDLoader 9008. You may now flash the device-specific firmware to unbrick it.
Even you have a black screen , PC does recognize your phone . Use only a USB 2.0 port . Verify if Qualcomm USB Driver have been installed on Windows .
muppetz said:
To begin with, power off your device. If you can’t do so, then you will have to wait until the battery completely drains out.
Now connect one end of the USB cable to your PC, but don’t attach the other end to the device.
Press and hold the Volume Up and Volume Down buttons together for a few seconds.
Now connect the other end of the device to the USB cable.
Your device will now be recognized as Qualcomm HS-USB QDLoader 9008. You may now flash the device-specific firmware to unbrick it.
Even you have a black screen , PC does recognize your phone . Use only a USB 2.0 port . Verify if drivers have been installed on Windows .
Click to expand...
Click to collapse
tried these steps but phone goes in 900E mode
OK , look then at this :
muppetz said:
OK , look then at this :
Click to expand...
Click to collapse
it does not work as he just changed the drivers from diagnostic mode to qdloader mode
pogradecari said:
Hello there members.
i have a Nothing Phone 1 in Edl Mode. Tried to restart it but still connected on Edl. i have searched around for this problem but sill unlucky to find a solution.
Client pretend to have played with roms and flashed the wrong one.
Any help suggestion?
Click to expand...
Click to collapse
Maybe it's too late already but you can unbrick the phone with this tool
Unbrick / Flash Stock Rom (1.1.7 global) QDLoader 9008 fix | EDL Mode fix
Hi everyone, If your phone (1) does not react on any of yours actions. You may have the same problem. This is an instruction how to fix it without Disassembly. ‼️ Do this at your own risk, I am not responsible for any damage that may occur to...
forum.xda-developers.com
none of these will work
pogradecari said:
none of these will work
Click to expand...
Click to collapse
Why? Have you tried?

Categories

Resources