Related
I don't like stock sony dialer and i tryed dialer created by Wajk (http://forum.xda-developers.com/crossdevice-dev/sony/mod-dialer-mods-1-0-t3115001).
But it not usefull for me because it don't have additional not latin letters in dial pad. Therefore i build dialer from CyanogenMod. And this dialer add additional letters to dial pad depending on the system locale.
REQUERIMENTS:
Xperia™ stock Lollipop 5.1.1, 5.0.2 (tested on Xperia ZR but must work in all Xperia with stock Lollipop)
Root
Deodexed / Odexed
INSTALL INSTRUCTIONS:
For Lollipop 5.0.2 use version 5.
For Lollipop 5.1.1 use version 6+.
With recovery:
Download zip archive Dialer_Without_inCallUI_recovery_v*.zip and install via recovery
With adb:
Download and unpack Dialer_With_InCallUI_v*.zip
Set execute permission for installD_start.sh and installD_wraper.sh is needed
Execute installD_start.sh
Known issues:
Sometimes problem with proximity sensor - fixed
empty name for SDN contacts
You do everything here at your own risk. I take no responsibility for any broken devices/sdcards/your house going down on fire and everything else.
do we get the call settings like the cynogen rom, for instance call connect vibrate and call waiting vibrate????
great!
CM Messages app also working on Stock Sony LP?
Can you try it and if working, share with us?
thnx
Wajk said:
great!
Messages app also working on AOSP?
Can you try it and if working, share with us?
thnx
Click to expand...
Click to collapse
It seems like i don't understand you A small problem with the translation. Often I don't understand English
Do you mean messages app from AOSP on stock rom ?
If yes i can try from CyanogenMod if need. Don't know have it difference with AOSP.
Anton111111 said:
It seems like i don't understand you A small problem with the translation. Often I don't understand English
Do you mean messages app from AOSP on stock rom ?
Click to expand...
Click to collapse
Yes, sorry for my english
It has some extra settings (Unicode, etc..)
alexdonwarez said:
do we get the call settings like the cynogen rom, for instance call connect vibrate and call waiting vibrate????
Click to expand...
Click to collapse
I don't use this features. But i tried now and call waiting vibrate, vibrate each 45 sec works fine. Ability to enable call waiting vibrate we have too. But i can't test it now.
Wajk said:
Yes, sorry for my english
It has some extra settings (Unicode, etc..)
Click to expand...
Click to collapse
I will try...
Wajk said:
Yes, sorry for my english
It has some extra settings (Unicode, etc..)
Click to expand...
Click to collapse
You can try http://forum.xda-developers.com/crossdevice-dev/sony/mod-cyanogenmod-messaging-app-stock-t3152431
But please don't forget that it is still beta version. I build it half an hour ago
Anton111111 said:
empty name for SDN contacts
Click to expand...
Click to collapse
Sounds very interesting!
But what is "SDN" ?
ponchofiesta said:
Sounds very interesting!
But what is "SDN" ?
Click to expand...
Click to collapse
I understand it is the contacts that come from the mobile operator.
As a temporary solution you can use the following app:
https://play.google.com/store/apps/details?id=wolfen.deleteblankcontacts
https://play.google.com/store/apps/details?id=com.rachunek.android.simcard
small update with one fix
Does it work with 5.1.1 too?
ponchofiesta said:
Does it work with 5.1.1 too?
Click to expand...
Click to collapse
Updated
For Lollipop 5.0.2 use version 5.
For Lollipop 5.1.1 use version 6+.
I like your work, however is it possible to remove the stock dialer and phonebook app ?
deepu28792 said:
I like your work, however is it possible to remove the stock dialer and phonebook app ?
Click to expand...
Click to collapse
It's easy. Rename Phonebook.apk to Phonebook.apk.bak in /system/priv-app/Phonebook/ folder and reboot.
Thanks @Anton111111 it worked.....
Anton111111 just beautiful, working great on m2 dual, with Z5 STYLE 4.5 Rom
Sent from my XPERIA M2 Dual using XDA-Developers mobile app
Anton111111 said:
small update with one fix
Click to expand...
Click to collapse
Hi maybe you could update this for mm?
I like your work!
thanks buddy
acabreram said:
Hi maybe you could update this for mm?
I like your work!
thanks buddy
Click to expand...
Click to collapse
I don't think. My xperia zr will not have mm. And I do not plan to change the mobile phone in the near future.
How can I add Group name for contact ?
Tks in advance.
Flyme OS 4.5.4.1R for our phone, made by pixle
Orginal thread:
http://bbs.ydss.cn/thread-599956-1-1.html
baidu download:
http://pan.baidu.com/s/1bnDOSDT?qq-pf-to=pcqq.group
yandex download:
https://yadi.sk/d/HQvOQmj2ktqwp
I didn't test it, so read the orginal thread before flashing and be careful!
i can work on it but i need a mirror link to the download
download link is terrible
bug?
Sent from my Redmi Note 2
LTE signal instability.
weijianhui said:
LTE signal instability.
Click to expand...
Click to collapse
can you tell me more about this rom? someone send to me mirror and i want start to work on it
I'm not a developer,so I don't know what you want,I just know it's based on cm12.1.
In the place LTE signal is not good,the signal will disappear again and again,so I back to Miui.
Sent from my Redmi Note 2 using XDA Free mobile app
weijianhui said:
I'm not a developer,so I don't know what you want,I just know it's based on cm12.1.
In the place LTE signal is not good,the signal will disappear again and again,so I back to Miui.
Sent from my Redmi Note 2 using XDA Free mobile app
Click to expand...
Click to collapse
after the boot i select my language and a popup tell me settings app crashes! and I can t go to the other steps....have you the same problem? how did you solve it?
Jo-san said:
after the boot i select my language and a popup tell me settings app crashes! and I can t go to the other steps....have you the same problem? how did you solve it?
Click to expand...
Click to collapse
can you remove setup wizard app in zip rom and test it again??
http://www.mediafire.com/download/p138wtfikvejzo0/flyme_Redmi-Note-2_pixle_4.5.4.1R_fix.zip
This is a mirror to download.
Installed fron the phone memory. I can´t from sd.
gfarzad said:
can you remove setup wizard app in zip rom and test it again??
Click to expand...
Click to collapse
solved it..it was because of gapps flash..i need to include them without the google initial login! there ae many part in chinese...needed to be traduced!
Jo-san said:
solved it..it was because of gapps flash..i need to include them without the google initial login! there ae many part in chinese...needed to be traduced!
Click to expand...
Click to collapse
good luck. i hope see your rom soon.:highfive:
i test this rom now.its very Interesting rom and i like it. just need more tweak for battery and smooth
New version of Flyme Os Stable for Redmi note 2...
Version 4.5.4.3 by Vova Vafin
Is based on cm12.1
USSD is working properly.
Added all the possible languages in all applications
Gapps (Google applications (only necessary)) Market, synchronization works as expected.
Root through SuperSU
Modem from the latest stable miui
No kitayschiny
Debugged, I saw no bugs.
camera, Vibrate, etc. works.
Links for site: http://4pda.ru/forum/index.php?showtopic=695717&st=2700#entry45185086
Link to download: https://cloud.mail.ru/public/GPyy/aQNDKAeey
Pixel GPE Dialer and Contacts
This mod now works with Android N.
Updated to Google Pixel version of the Dialer and Contacts
I have taken the GPE Dialer and Contacts found here [url]http://forum.xda-developers.com/showpost.php?p=68096911&postcount=95[/URL] and made it a Magisk Module. This allows the Dialer to act as though it is installed directly with in the system without actually modifying the system
For information on what Majisk is and how to install it, please read here: [url]http://forum.xda-developers.com/android/software/mod-magisk-v1-universal-systemless-t3432382[/URL]
This mod was tested on the HTC 10 using Magisk v7.
Only thing you can't do is change your Wi-Fi calling preference. If you are on WiFi preferred, you can't change it unless you disable the MOD and reboot. Make your change then re-rnable the MOD and reboot again. That is the only problem I have. It is the same if you flash the original zip that writes directly to system.
This zip file requires Magisk to be installed. It will not work without Magisk.
Changes sync'd and now available to download in Magisk Manager. Thanks for those testing...
v3.0.0
Update to new Magisk template to work with Magisk v12+
Update Dialer to v8.0.148481159
Update Contacts to v1.7.6
Or download from here: Magisk-GPEDialer_HTC10.v3.0.0
Download Here:
Magisk v7 version
This can be installed through the Magisk Manager 2.0 or flashed in recovery.
Note: All updates will only be available through the Magisk Manager going forward.
10/16/16 - New update with Google Contacts 1.5.16 downloadable through the Magisk Manager...
GPEDialer Pixel Version 2.0.0
GPEDialer_v5.1.13(Magisk v7)
GPEDialer Marshmallow Version 1.0.0
GPEDialer_v4.0.12(Magisk v7)
Magisk v6 version
Flash the zip file in recovery.
GPEDialer_v4.0.12(Magisk v6)
Thanks for posting, I personally prefer the Google Dialer UI over the Stock HTC. Is there any functionality issues? such as wifi calling compatibility, or speakerphone, receiving calls etc?
Sent from my HTC 10 using Tapatalk
threetwentyfizzle said:
Thanks for posting, I personally prefer the Google Dialer UI over the Stock HTC. Is there any functionality issues? such as wifi calling compatibility, or speakerphone, receiving calls etc?
Click to expand...
Click to collapse
Everything is working for me. I am on US Unlocked firmware on T-Mobile. Only thing you can't do is change your Wi-Fi calling preference. If you are on WiFi preferred, you can't change it unless you disable the MOD and reboot. Make your change then re-rnable the MOD and reboot again. That is the only problem I have. It is the same if you flash the original zip that writes directly to system.
Perfect, I'm on the same network, so that pretty much sums up everything. Thanks for taking the time to get it working and contributing!
Sent from my HTC 10 using Tapatalk
Wow, this is working great. I love this dialer. Thanks for sharing your work!
Everything seems to be working great! So much cleaner and more useful than stock!
Sent from my HTC 10 using Tapatalk
How can you disable this and revert to HTC?
Spinkness said:
How can you disable this and revert to HTC?
Click to expand...
Click to collapse
Use a root file explorer to go to /magisk/GPEDialer folder. Create a new empty file and name it disable then reboot
To re-enable, just delete the file and reboot.
jsaxon2 said:
Use a root file explorer to go to /magisk/GPEDialer folder. Create a new empty file and name it disable then reboot
To re-enable, just delete the file and reboot.
Click to expand...
Click to collapse
I can't find the GPEDialer folder there. No other way to do it?
Spinkness said:
I can't find the GPEDialer folder there. No other way to do it?
Click to expand...
Click to collapse
What folders do you have under /magisk?
jsaxon2 said:
What folders do you have under /magisk?
Click to expand...
Click to collapse
these
Spinkness said:
these
Click to expand...
Click to collapse
Damn, My bad and good find. I copied the wrong zip file to my google drive. The one you have installs to /magisk/PixelLauncher. If you did not install the PixelLauncher, just delete that folder and reinstall the updated zip. I have updated the Original Post. Sorry bout that.
Link to updated zip.
GPEDialer_v4.0.12(Magisk)
jsaxon2 said:
Damn, My bad and good find. I copied the wrong zip file to my google drive. The one you have installs to /magisk/PixelLauncher. If you did not install the PixelLauncher, just delete that folder and reinstall the updated zip. I have updated the Original Post. Sorry bout that.
Link to updated zip.
GPEDialer_v4.0.12(Magisk)
Click to expand...
Click to collapse
That one now gives the right folder. But the update-binary file still says its the pixel launcher under mod name while flashing just an FYI.
jsaxon2 said:
Damn, My bad and good find. I copied the wrong zip file to my google drive. The one you have installs to /magisk/PixelLauncher. If you did not install the PixelLauncher, just delete that folder and reinstall the updated zip. I have updated the Original Post. Sorry bout that.
Link to updated zip.
GPEDialer_v4.0.12(Magisk)
Click to expand...
Click to collapse
That worked thanks!
Just a quick observation I noticed after using this mod for the past few days,
The ice view case works on receiving/rejecting calls with the GPE Dialer, but the caller always shows as "unknown". I'm assuming it's due to the HTC Contacts app integration into Ice View, but just figured I'd mention it. The fact that everything else works flawlessly, is totally awesome.
Sent from my HTC 10 using Tapatalk
After flashing this everything is working perfectly except I dont have heads up when I receive a call..I remember having it when I flashed GPE dialer on my M8.. is there any way to enable it?
Thanks
CrazyCypher said:
After flashing this everything is working perfectly except I dont have heads up when I receive a call..I remember having it when I flashed GPE dialer on my M8.. is there any way to enable it?
Thanks
Click to expand...
Click to collapse
As far as I know, heads up notifications have to be supported by the rom you are using. I am using Viper 3.1 and it works for me.
jsaxon2 said:
As far as I know, heads up notifications have to be supported by the rom you are using. I am using Viper 3.1 and it works for me.
Click to expand...
Click to collapse
I have stock HTC Rom with root and xposed... Any way you could help me to get them working? I think the stock rom supports the heads up...
CrazyCypher said:
I have stock HTC Rom with root and xposed... Any way you could help me to get them working? I think the stock rom supports the heads up...
Click to expand...
Click to collapse
I'm sorry, there is really nothing I can do. All I did was package the dialer to work as a Magisk Module. I don't use xposed but maybe there is an xposed module to do what you want. I just have no idea. Maybe someone else can suggest something.
jsaxon2 said:
I'm sorry, there is really nothing I can do. All I did was package the dialer to work as a Magisk Module. I don't use xposed but maybe there is an xposed module to do what you want. I just have no idea. Maybe someone else can suggest something.
Click to expand...
Click to collapse
Yes I know it is not your fault It is working perfectly and I really prefer gpe over htc, its beautiful and smooth
Hi Guys, This Is my first Work, fully port pixel navigation animation with nav button.
Working On
Moto g 2015
Moto g falcon
one plus one
one plus 3
Moto X 2014
Firstly I need Thanks To @Charles_l To help out to make this Mod
App Inf
SystemUI.apk (with White Nav Button)
Download Apk
SystemUI.apk
WARNING
1. This SystemUI app is bassed OnCM 14.1
2. This is not flashible File so u need to do it mannually.
3. If u upgrade the rom that it back to old Button.
Instruction
1. First u need to backup all data from TWRP(If anything gone it will help to restore)_
2. Obviously Should be Root.
3. Now Download The File and place to SD Card.
4 And the main and Last step is copy the File To /System/Priv-app/SystemUI and Make a new folder then copy to that folder(For a safety), now give that app to permission rw- r- r-. after that copy and Replace that file file main directory SystemUI. Thats It,,,
5. Ur navigation Bar will change Instantly
Watch Video For Help
If any goes to wrong then please restore the backup data from twrp. No I and @charles_I Responsible for the any damagae
Thank u, Stay tuned while i preparing to make flashible Zip for the phone, and the main feature of this mod is only Animation on home Button which is kept Exclusively for the Pixel Phone.
Thank You And Press Big Thanks Button if u like Our work
The navigation buttons shrink to very small size. I changed my dpi to 430.
Sent from my XT1092 using Tapatalk
Same with me. Also, notification looks funny in crDroid
Worked fine for me. I also used cm14.1, as per the thread title. If you're trying this on anything else then it's obvious why it's not working.
dictionary said:
Worked fine for me. I also used cm14.1, as per the thread title. If you're trying this on anything else then it's obvious why it's not working.
Click to expand...
Click to collapse
I am using CM 14.1
rAv_thorAt said:
I am using CM 14.1
Click to expand...
Click to collapse
You try changing nav buttons with substratum? Even after I applied a theme later on, it still worked
Works great. Thanks for doing this.
Does not work on the official build of CM14.1
Icons look weird. Tried changing dpi and didn't work, neither rebooting. Using CM14.1 Unofficial.
http://cloud.tapatalk.com/s/5845ef487d518/Screenshot_20161205-204947.png?
Sent from my XT1095 using Tapatalk
Does not work on the official build of CM14.1
You have to manually port it to your current rom to work and look perfectly.
Here is the link on how to port it. I have successfully ported it and it's good.
http://chromloop.com/2016/11/guide-how-to-port-pixel-navigation-bar-animation-to-your-phone/.
kajinzer said:
You have to manually port it to your current rom to work and look perfectly.
Here is the link on how to port it. I have successfully ported it and it's good.
http://chromloop.com/2016/11/guide-how-to-port-pixel-navigation-bar-animation-to-your-phone/.
Click to expand...
Click to collapse
Which rom and build you are currently, you can send your Port also friend
browcantor said:
Which rom and build you are currently, you can send your Port also friend
Click to expand...
Click to collapse
Currently 1209 official nigthly.
Here it is:
kajinzer said:
Currently 1209 official nigthly.
Here it is:
Click to expand...
Click to collapse
I used it in the last build, it's working perfectly, thank you, my friend.
thank you
kajinzer said:
Currently 1209 official nigthly.
Here it is:
Click to expand...
Click to collapse
Sir, do you have apk for last nightly build? I can't change anything on status bar when using your uploaded apk.
muabaylentroi said:
Sir, do you have apk for last nightly build? I can't change anything on status bar when using your uploaded apk.
Click to expand...
Click to collapse
Here you go. 20161225. Sorry for the late upload. Ive only recently gotten to this build
kajinzer said:
Here you go. 20161225. Sorry for the late upload. Ive only recently gotten to this build
Click to expand...
Click to collapse
Thanks sir, it's work perfectly on my device.
I've ported it for Unofficial LineageOS
Build 14/01/17
vazbloke said:
I've ported it for Unofficial LineageOS
Build 14/01/17
Click to expand...
Click to collapse
Wow gr8 wrk bro..
Sent from my Pixel using Tapatalk
This thread is closed due to violation of protocol
I'm using it as a daily driver. Tom is smooth and give me really good baterry backup xD
Steps to install?
I've tried installing with pixel experience (treble), gave me a bootloop.
cichowlasp said:
I'm using it as a daily driver. Tom is smooth and give me really good baterry backup xD
Click to expand...
Click to collapse
Is it has any bugs??? Specifically volte working???
Pavan420 said:
Is it has any bugs??? Specifically volte working???
Click to expand...
Click to collapse
I don't have VoLTE in my country so I can't test it. And the only bug I noticed is that the fingerprint reader not working (button work and swipe right to recently also but fingerprint not)
Sent from my Pixel XL using Tapatalk
cichowlasp said:
I don't have VoLTE in my country so I can't test it. And the only bug I noticed is that the fingerprint reader not working (button work and swipe right to recently also but fingerprint not)
Sent from my Pixel XL using Tapatalk
Click to expand...
Click to collapse
In India, I used Jio SIM and it works sometime perfectly and sometime it just show incoming calls but when you picked up call the call gets cancelled, and you cannot used Volte for outgoing calls normal calls can be made and jio4g app from playstore doesnt work because it recognize your phone as volte enabled
vvijayk1999 said:
ANDROID P DEVELOPER PREVIEW
Dear friends,
Since the unofficial Android P Dev preview ROM has been developed I'm posting the links below.
Note:
its a preview build, So high chances of instability.
I'm not responsible for any damage caused.
And its not a daily driver.
Steps to install:
Click to expand...
Click to collapse
Hey , vvijayk1999, correct me if I'm wrong but do we have Mokee ROM for Zuk z2 plus? or these are the general instructions ?
I searched for Mokee ROM for our device but what I found is this and it says, it's based on 6.0 .
Mokee link that I found is here : https://forum.xda-developers.com/lenovo-zuk-z2/how-to/mokee-romofficial-zuk-z2-t3539558
andromuks said:
Hey , vvijayk1999, correct me if I'm wrong but do we have Mokee ROM for Zuk z2 plus? or these are the general instructions ?
I searched for Mokee ROM for our device but what I found is this and it says, it's based on 6.0 .
Mokee link that I found is here : https://forum.xda-developers.com/lenovo-zuk-z2/how-to/mokee-romofficial-zuk-z2-t3539558
Click to expand...
Click to collapse
Bro use rr 6.1.0 treble
Way to early for some one with sigle Z2 Plus as primary phone to try out.
I shall wait till more of a device specific build is made available !!
I get an error error7 when installing incall2.zip. Do everyone alike?
EldarWap said:
I get an error error7 when installing incall2.zip. Do everyone alike?
Click to expand...
Click to collapse
Mount system and vendor
Noverity zip link?
guyz_ahead said:
Noverity zip link?
Click to expand...
Click to collapse
We don't need it for Z2.
OP actually copied the steps which were meant for OnePlus 5 users.
JashanjotSidhu said:
We don't need it for Z2.
OP actually copied the steps which were meant for OnePlus 5 users.
Click to expand...
Click to collapse
Thanks bro. To all of you wanting to enable Double Tap 2 Wake Dt2w, firstly please thank @optimumpro coz of whom I am aware of the mod kernel aduitor https://forum.xda-developers.com/attachment.php?attachmentid=4484977&d=1524581025 Thanks Optimumpro
? Goto to kernel aduitor grant root and head to wake. Then enable dt2w
how to remove this notice?
EldarWap said:
how to remove this notice?
Click to expand...
Click to collapse
Install magisk, download titanium, remove pixel setup.
EldarWap said:
how to remove this notice?
Click to expand...
Click to collapse
Long press on that notification then i option will come then click on it then tap disable...done
I flashed dp4 but it's lagging and freezing. Can anybody tell me the steps for smooth experience?
Tarunshrm864 said:
I flashed dp4 but it's lagging and freezing. Can anybody tell me the steps for smooth experience?
Click to expand...
Click to collapse
you installed via twrp p-lag-fix.zip? I installed it after aex 5.7 and now I have somehow shown that the version of DP3 is installed
guyz_ahead said:
Install magisk, download titanium, remove pixel setup.
Click to expand...
Click to collapse
Can't you just delete it with the TWRP built-in file manager? That's what I would have done.