Database Users

[Q] Viewing nook system files on my computer?

I am a bit stuck... I rooted my Nook Touch using the TouchNooter method. It worked well and I can install apps from the market easily.
But I think I missed a step. I want to be able to access nook system files on my computer and can't seem to figure out how. When connected via USB, I can see the normal Nook folders for adding books and such but none of the system files.
I want to be able to add/remove apk's using my computer. Is this even possible?

The easiest way to do this is copy apk files to your SD card and then use ES File or Root explorer to fin and install them.
Sent from my NookColor using xda premium

Even Astro get to install apk, and it's free on market.

While the OP can get Astro she will not be able to see the system files with that. ES File allows access to root files and is free as well.

I have not wifi and any file mangers
I rooted my nook touch.
I have not wifi (unavailable to me)and any file mangers (root explorer &...) how can i install file manager in my nook ?
I want to be able to install apk's using my computer. Is this even possible?

you can install using adb throught wifi. google adb.

I've successfully rooted my touch, and am trying to install Messagease & Instafetch.
Using ES File Explorer, I can't gain access to /system/apps, which is where i'm told they need to go- ES File won't go navigate above the SD card, although I've enabled root access & /system mounting.
i've tried copying the apks to an sd card, but install fails due to non-market issues, although i've enabled installing from non-market sources as well (as far as i can tell, anyway- maybe i have to do that in another place too?).
any ideas what I've done wrong? let me know if i need to post any other info. I'm using LinuxMint.
thanks!
-steve

ypres333 said:
i've enabled installing from non-market sources as well
Click to expand...
Click to collapse
If you enable it using Nook Color Tools, you should untick and tick again the checkbox to make it work
Also, it may be possible to access the system partition booting with noogie.img ...

merci mille fois!
sorry for the question, but is rooting a 2nd time with noogie.img a bad idea, or will it just overwrite the image i created with touchnooter?
thanks in advance,
-steve
i may have figured something out: i remade a new image with noogie.img, the rebooted the nook with the sd card in. once the "rooted forever" appeared, I plugged in the USB and 7 partitions showed up on my computer screen. i was able to access the files there and put the messagease.apk and instapaper apps in there that way.
thanks again!

[Q] Getting software unavailable in the market?

There's some software I'd like to get, but it's unavailable in the market. When I go to groupon.be e.g., there is a download link for the android market, but it pops up the amazon app store where it isn't available. I can't seem to find it in the marketplace either.
Same for the tweakers.net app, whatsapp, wordpress, colruyt collect & go,...
How do I go about these things?

If you have an Android phone, you can just download the app, use an app called Appsaver to copy it to your phone's SD card, and then you can either email it to yourself or put it in your Dropbox.
If you don't have an Android phone, it could be a bit harder. You'll have to find the apk file somewhere online. Usually typing in the app name + apk into Google will find it on one of many websites that host Android apps, like apktop.
If you really can't find it at all after doing all of the above, then you could always just try politely requesting that someone here send it to you. I'm sure you'll find someone willing to help!

That's a good idea, since I do have an Android phone! Is there a way that I can make the normal market open when clicking market links instead of the Amazon app store?
Sent from my HTC Desire using Tapatalk

I tend to download it on my phone, then use ES File Explorer to go to /data/app and send it to my Dropbox. Then I just pull it with my Fire.

I succeeded in copying the .apk's from my phone to my Kindle, but when I click them in File Expert, the install won't succeed.

If you don't want to use a file explorer app to search around hidden Android system folders to find thess apps, there is a much easier way for the lay people (non-experts).
(I already presume you have a file explorer app eg. root explorer installed on your KF, explained in other threads particularly the rooting guide - root explorer (paid) and ES file explorer (free) are both good)
Go to Market and install appinstaller (many names many version, I use "appinstaller" by gregory House) to you Android phone. Use its "backup" function and it will show all the third party (non-system) apps you have installed. Pick the ones you want to move over to the KF (remember to include the appinstaller itself!), or check them all (full backup of all 3rd party apps). It will save them in a folder called "appsaver" - OK you still need to use a file explorer to find this folder, but at least it is in one single folder which is not in the root /system folder.
Hook up your Android phone to your PC and use Windows Explorer to find this "appsaver" folder and copy it somewhere in your PC. Unhook your phone and hook up your KF. Copy and paste the "appsaver" folder from your PC into the KF (which appears as a drive in Windows - don't put this inside any other folders in the KF). Unhook the KF.
In KF, run your file explorer app - most of them start default in the /sdcard folder which is where the "appsaver" folder is. Open the "appsaver" folder and you see all the .apk (app installation programs) you saved from your Android phone. Find and run "appinstaller.apk" to install this app. Now you can run this app and use the "install" function (it will detect the "appsaver" folder and all the apps inside) to install any apps you moved over from your phone.
---------- Post added at 01:36 AM ---------- Previous post was at 01:32 AM ----------
ctgchaos said:
I succeeded in copying the .apk's from my phone to my Kindle, but when I click them in File Expert, the install won't succeed.
Click to expand...
Click to collapse
Rookie mistake:
Click the little "Setting" (cogwheel) icon at the top right corner -> "More" -> "Device" -> "Allow installation of applications" - switch "ON"

I have not forgotten the "Allow installation of applications"-option, but thanks for the kind reminder. I will try the appinstaller method, thanks!

This seems to be an issue with the market link redirecting to the Amazon app store, right? Check out this thread.
tl;dr: Rename MarketIntentProxy.apk in /system/app to MarketIntentProxy.apk.bak
Of course, this assumes you have the Android Market installed on your Fire.

I have tried what you suggested, Slim_thumb, but it does seem to be due to something else, as I still can't install the apps Twunch, Twerkers.net, Groupon, Collect&Go. When trying it blandly tells me "not installed".

[Q] Installing app on unmodified Stock 1.4.1 NC [Solved]

My wife has a NC and likes it the way it is, i.e. BN store, but I would like to add an app that does not require root. I was thinking that I could use a clockwork recovery SD card with a zip of the app, just like we do with google apps.
Will this work?
How do I make a apk into a flashable zip?
The app is You Version Bible
Thanks
-EDIT-
So I have figured this out, it is possible to install apps (that do not require root) with out rooting anything. I would call it side loading via CWM sd card.
The key was to use the mount paths from ManualNooter (\META-INF\com\google\android\updater-script)
0.1.) Get apks for you apps (either with titanium or copy from 'data/app')
0.2.) Get a apk for 'Nook Color App Manager' (search the android market, can't post links yet)
1.) Start with the ManualNooter file and remove all folders but 'data' and 'META-INF'
2.) Delete all files in the 'data/app' folder
3.) Place the apks you want to install in the 'data/app' folder
4.) Edit '\META-INF\com\google\android\updater-script' using a programing text editor (otherwise you will not see the line spaces) remove all sections except the following: 'Mounting partitions...' 'Installing apks to /data/app...' 'Unmounting Partitions...'
5.) Save the script file and put all this back together in the zip.
6.) Use the CWM sd card to install the file. (if you don't know how, use google)
7.) Remove card and reboot after done. A new app App Manager will show up in your nook app list, go to the home page to run it and add links for your new installed apps.
Note: I did not post an files as I used other peoples work i.e. GMPOWER and apps from the market

So I have done lots of research and even tried this. I think I got the app installed but in this case there is no way to show the app in the stock launcher as it only lists apps it installs.
For reference I will include the procedure to install apps via CMW(Clockwork Mod Recovery)
Thread
You download the file attached to post 17 in the above thread, it is a empty zip that can be filled with your apks that you want. Simply place the new file on a CWM sd card and install the file via regular instructions in the above post.
If I ever find a script to add a link to the stock launcher I will post that and then this might be a usable idea for side loading apps.

How to install google store or other apps on the Relaunch on the nook

Hi, as the title says, I have a rooted Nook with Relaunch on it and I want to understand how I can install the google store app or other apps on the Relaunch system. thank you for your time. I've tried researching it but with no luck.

Dre000 said:
Hi, as the title says, I have a rooted Nook with Relaunch on it and I want to understand how I can install the google store app or other apps on the Relaunch system. thank you for your time. I've tried researching it but with no luck.
Click to expand...
Click to collapse
I assume you are referring to an old NST or NSTG, not the new Glowlight Plus.
You've come late to the party for the PlayStore. Google has rolled up the welcome mat for devices running Eclair (Android 2.1) as of June 30, 2017.
You can side-load apps using Relaunch by transferring the apk files from your PC via USB to you Nook (place in a convenient folder, preferably on the SD card). Using the file manager capabilities of Relaunch, navigate to the folder where you copied the apk files. Touching on the apk file icon should bring up the option to install.
You can find various apks by searching with Google or trolling the forum here (a bunch that work in the link in my signature).

nmyshkin said:
I assume you are referring to an old NST or NSTG, not the new Glowlight Plus.
You've come late to the party for the PlayStore. Google has rolled up the welcome mat for devices running Eclair (Android 2.1) as of June 30, 2017.
You can side-load apps using Relaunch by transferring the apk files from your PC via USB to you Nook (place in a convenient folder, preferably on the SD card). Using the file manager capabilities of Relaunch, navigate to the folder where you copied the apk files. Touching on the apk file icon should bring up the option to install.
You can find various apks by searching with Google or trolling the forum here (a bunch that work in the link in my signature).
Click to expand...
Click to collapse
Hi, do you by any chance no the search to show all the files found on the main memory my PC doesn't seem to show the SD card when I plug in my Nook, so I cant upload the apk to the SD card it seems. I tried /root/

Dre000 said:
Hi, do you by any chance no the search to show all the files found on the main memory my PC doesn't seem to show the SD card when I plug in my Nook, so I cant upload the apk to the SD card it seems. I tried /root/
Click to expand...
Click to collapse
If your USB drivers are installed correctly you should see two "drives" when the NST is attached. One is the user accessible internal partition. You can copy over apk files into the "My Files" directory there if need be, as long as you can navigate to that folder using Relaunch, and install from there as described above--at least I think you can. The second "drive" should be the SD card which will show a similar directory structure unless you have added folders yourself.
There is no way to access all files on the internal memory via USB. Only the user data partition can be seen. To get to anything else you need a root browser (I think Relaunch has settings which enable root browsing).
If you're not seeing the SD card you either have an issue with the USB connection or there is an issue with the card itself. Can you see the card with Relaunch?

nmyshkin said:
If your USB drivers are installed correctly you should see two "drives" when the NST is attached. One is the user accessible internal partition. You can copy over apk files into the "My Files" directory there if need be, as long as you can navigate to that folder using Relaunch, and install from there as described above--at least I think you can. The second "drive" should be the SD card which will show a similar directory structure unless you have added folders yourself.
There is no way to access all files on the internal memory via USB. Only the user data partition can be seen. To get to anything else you need a root browser (I think Relaunch has settings which enable root browsing).
If you're not seeing the SD card you either have an issue with the USB connection or there is an issue with the card itself. Can you see the card with Relaunch?
Click to expand...
Click to collapse
Yes I can see the card using Relaunch. And I was able to copy the apk into the My files directory, however, I was trying to figure out what the exact path is to specify in the Relaunch file browser/explorer so that i can see and install the apk? Do you know what it may be?

Dre000 said:
Yes I can see the card using Relaunch. And I was able to copy the apk into the My files directory, however, I was trying to figure out what the exact path is to specify in the Relaunch file browser/explorer so that i can see and install the apk? Do you know what it may be?
Click to expand...
Click to collapse
/media/My Files

nmyshkin said:
/media/My Files
Click to expand...
Click to collapse
Ok thank you. I managed to find the package, however I'm presented with the error "There is a problem parsing the package" when trying to install. I tried installing some of the apps from your signature also but still the same issue persists.

Dre000 said:
Ok thank you. I managed to find the package, however I'm presented with the error "There is a problem parsing the package" when trying to install. I tried installing some of the apps from your signature also but still the same issue persists.
Click to expand...
Click to collapse
Parsing errors generally mean the Android version is incorrect. That would not be the case for apps from my zip package.
How did you root your Nook?
Edit: try moving the apk files to the SD card and retry the install

Rooting and Custom ROM

I am getting my Nook ST from ebay very soon. Please help me understand the process:
What is the difference between just rooting using Nook Manager and flashing a ROM like 1337?
I am assuming, I can still install APKs after rooting?
thanks
S

sany said:
I am getting my Nook ST from ebay very soon. Please help me understand the process:
What is the difference between just rooting using Nook Manager and flashing a ROM like 1337?
I am assuming, I can still install APKs after rooting?
thanks
S
Click to expand...
Click to collapse
Rooting with NookManager gives you access to "root" directories that are normally off limits to users. It also allows for various customizations. It sets the security flag for installing from "unknown sources", allowing you to install apps via a file manager (or ADB), as opposed to getting them from the PlayStore (which you can't anymore). And it installs a base set of apps to get you going, like a file manager, launcher, browser, etc. That is customizable.
Custom ROMs like the 1337 simply enable different features that some people like. Perhaps better to use the system "as-is" for a bit before you decide to wipe it out? Then you'll have a better idea of what you'd like to have.

nmyshkin said:
Rooting with NookManager gives you access to "root" directories that are normally off limits to users. It also allows for various customizations. It sets the security flag for installing from "unknown sources", allowing you to install apps via a file manager (or ADB), as opposed to getting them from the PlayStore (which you can't anymore). And it installs a base set of apps to get you going, like a file manager, launcher, browser, etc. That is customizable.
Custom ROMs like the 1337 simply enable different features that some people like. Perhaps better to use the system "as-is" for a bit before you decide to wipe it out? Then you'll have a better idea of what you'd like to have.
Click to expand...
Click to collapse
Thank you @nmyshkin, I think my liking will be towards Nook Manager. So I will try to get ready with the Nook Manager installation files and instruction. The only thing confusing here in the forum is there are too many threads and geeting lost which and where to start. Hope if I start with the original thread which is from way back 2012, it will still work. My understanding is if I am on a new firmware 2.1.2 I will rewrite the modification files to nook manager as per that thread.
thanks again
S

sany said:
Thank you @nmyshkin, I think my liking will be towards Nook Manager. So I will try to get ready with the Nook Manager installation files and instruction. The only thing confusing here in the forum is there are too many threads and geeting lost which and where to start. Hope if I start with the original thread which is from way back 2012, it will still work. My understanding is if I am on a new firmware 2.1.2 I will rewrite the modification files to nook manager as per that thread.
thanks again
S
Click to expand...
Click to collapse
Here's how you get started:
1. When you get your NST, execute a factory reset. This will return the device to an out-of-the-box condition. To do this, power up and as soon as you see the "Read Forever, your Nook is starting up" screen, hold the two lower hardware buttons until you see a screen prompt.
2. Register your device with B&N.
3. Update the firmware to 1.2.2 (https://su.barnesandnoble.com/nook/nook2/1.2.2/351e26527e80156183e74be2da2ce89f/nook_1_2_update.zip)
4. Prepare a NookManager card according to the instructions here: https://forum.xda-developers.com/nook-touch/development/nst-g-updating-nookmanager-t3873048, making whatever changes/additions you want in terms of base software such as a file manager, browser, launcher, etc.
5. Run NookManager. Before you do anything else I suggest you make a backup of the newly updated and registered NST. That way if something goes wrong, you won't have to go all the way back to a factory reset. After the backup, root the NST and exit NookManager.
After that, it's pretty much up to you. Any time you want to make another backup, just reboot with the NookManager card inserted and make a backup. Just remember that the backup will replace whatever is on the NookManager card, so if you wanted to keep that one, you need to have copied it to your PC first.

nmyshkin said:
Here's how you get started:
1. When you get your NST, execute a factory reset. This will return the device to an out-of-the-box condition. To do this, power up and as soon as you see the "Read Forever, your Nook is starting up" screen, hold the two lower hardware buttons until you see a screen prompt.
2. Register your device with B&N.
3. Update the firmware to 1.2.2 .
Click to expand...
Click to collapse
Very helpful! thanks again.

nmyshkin said:
2. Register your device with B&N.
Click to expand...
Click to collapse
How important is this step - do I really need to register? any advantages and disadvantages?

sany said:
How important is this step - do I really need to register? any advantages and disadvantages?
Click to expand...
Click to collapse
The device software is designed to sell ebooks from B&N. Anything that frustrates this design (like not registering or disabling parts of the B&N system) tends to raise all kinds of internal alarms and the system dialogs constantly with itself, worrying about its purpose in life, its inability to "phone home", and generally fritters away a lot of its battery charge on rehearsing for a role it cannot assume.
In short, the path of least resistance results in the least system hand-wringing, improved battery life, etc. You don't need to enter any credit card information. All you need is an email address (which I suppose could be fake) and a password. Then you can forget about it if you have no interest in purchasing ebooks from B&N. I have completely ignored the B&N system except for the Reader and Library which I find adequate--and simple--enough for my needs. But everything else is hidden. It just lives its happy little digital life waiting for that one special day when I will buy an ebook with a patience only electrons can exhibit. Meanwhile I have all kinds of other stuff that I am interested in and there don't seem to be any issues or conflicts with the B&N system.
My 2 cents.

Installed but no apps
nmyshkin said:
Here's how you get started:
1. When you get your NST, execute a factory reset. This will return the device to an out-of-the-box condition. To do this, power up and as soon as you see the "Read Forever, your Nook is starting up" screen, hold the two lower hardware buttons until you see a screen prompt.
2. Register your device with B&N.
3. Update the firmware to 1.2.2 (https://su.barnesandnoble.com/nook/nook2/1.2.2/351e26527e80156183e74be2da2ce89f/nook_1_2_update.zip)
4. Prepare a NookManager card according to the instructions here: https://forum.xda-developers.com/nook-touch/development/nst-g-updating-nookmanager-t3873048, making whatever changes/additions you want in terms of base software such as a file manager, browser, launcher, etc.
5. Run NookManager. Before you do anything else I suggest you make a backup of the newly updated and registered NST. That way if something goes wrong, you won't have to go all the way back to a factory reset. After the backup, root the NST and exit NookManager.
After that, it's pretty much up to you. Any time you want to make another backup, just reboot with the NookManager card inserted and make a backup. Just remember that the backup will replace whatever is on the NookManager card, so if you wanted to keep that one, you need to have copied it to your PC first.
Click to expand...
Click to collapse
I successfully backed up and rooted the device. Firmware is 1.2.2.
But I don't have any apps. Not even the base software. See screenshot. Even the extras like es file explorer were not installed. Since I don't have any file explorer, I am unable to install any apps. I want to go for ADB method as last resort. Please advice.
Thanks

sany said:
I successfully backed up and rooted the device. Firmware is 1.2.2.
But I don't have any apps. Not even the base software. See screenshot. Even the extras like es file explorer were not installed. Since I don't have any file explorer, I am unable to install any apps. I want to go for ADB method as last resort. Please advice.
Thanks
Click to expand...
Click to collapse
You can try for ADB (more headaches there), but it would be better now to get some useful apps and have a way to conveniently side-load others. You are supposed to be able to install apps from Relaunch in the file manager screen. That would involve copying the apk file to the NST via a USB connection, then locating that apk file using the file folder browser and tapping on the icon. I could never get that to work, but it is supposed to work.
Failing that, you need to revisit NookManager. You must not have done the customization correctly if none of the apps you wanted were installed. If you can get that fixed, you can simply root again with NookManager (right on top of what you have now) and it will fix the problem IF you get it set up correctly.
There are four steps required to add an app to the NookManager rooting routine:
1. Copy the apk file to the folder files/data/app on the NookManager SD card
2. in the folder "scripts" on the NookManager SD card, copy and rename one of the "install_x" files so it represents the app you just moved into the folder in step 1. So, if you want ES File Explorer, you might rename the file "install_esfileexplorer"
3. Edit the file you just copied and renamed, changing the name of the apk file in the first line to exactly match the filename of the apk file you have replaced in files/data/app. So continuing the example, "es_file_explorer.apk" (which is the name of the apk file as I provided it). Then edit the "echo" statement so it reads something like "echo ES File Explorer installed"
4. Locate the file scripts/do_root. Copy and rename one of the "install_x" files so it matches what you did earlier, in this case "install_es_file_explorer". There are no contents to edit.
You need to do those four steps for each app you want to add to the install list. To remove an app you don't want (like the Amazon App Store), remove the apk file from files/data/app, remove the "install_x" file for that app from the folder "scripts", and remove the "install_x" file for that app from the file scripts/do_root.

nmyshkin said:
Here's how you get started:
1. When you get your NST, execute a factory reset. This will return the device to an out-of-the-box condition. To do this, power up and as soon as you see the "Read Forever, your Nook is starting up" screen, hold the two lower hardware buttons until you see a screen prompt.
2. Register your device with B&N.
3. Update the firmware to 1.2.2 (https://su.barnesandnoble.com/nook/nook2/1.2.2/351e26527e80156183e74be2da2ce89f/nook_1_2_update.zip)
4. Prepare a NookManager card according to the instructions here: https://forum.xda-developers.com/nook-touch/development/nst-g-updating-nookmanager-t3873048, making whatever changes/additions you want in terms of base software such as a file manager, browser, launcher, etc.
5. Run NookManager. Before you do anything else I suggest you make a backup of the newly updated and registered NST. That way if something goes wrong, you won't have to go all the way back to a factory reset. After the backup, root the NST and exit NookManager.
After that, it's pretty much up to you. Any time you want to make another backup, just reboot with the NookManager card inserted and make a backup. Just remember that the backup will replace whatever is on the NookManager card, so if you wanted to keep that one, you need to have copied it to your PC first.
Click to expand...
Click to collapse
Thanks, I followed all those steps...I will take a relook at it. But without es file explorer, I thought there is already a file manager. How to I get there as I can't see anything in the app drawer? (Screenshot in previous post).

sany said:
Thanks, I followed all those steps...I will take a relook at it. But without es file explorer, I thought there is already a file manager. How to I get there as I can't see anything in the app drawer? (Screenshot in previous post).
Click to expand...
Click to collapse
I know very little about Relaunch, but I believe you need to tap on the open door in the upper right corner to get out of the app drawer.

Oh okay! I was expecting to launch file manager from app drawer. So when relaunch opens we are already in file explorer.
One more question: how do we make dictionary work in the default nook reader, that is when you you open a book from library. I thought pressing on a particular word will present me the option. I only see option to bookmark. I have to read the manual again.

sany said:
Oh okay! I was expecting to launch file manager from app drawer. So when relaunch opens we are already in file explorer.
One more question: how do we make dictionary work in the default nook reader, that is when you you open a book from library. I thought pressing on a particular word will present me the option. I only see option to bookmark. I have to read the manual again.
Click to expand...
Click to collapse
That's how the dictionary works for me. Hold your finger on a word until it is highlighted. Then a series of options pops up from the bottom, one of which is "Look up".

nmyshkin said:
You can try for ADB (more headaches there), but it would be better now to get some useful apps and have a way to conveniently side-load others. You are supposed to be able to install apps from Relaunch in the file manager screen. That would involve copying the apk file to the NST via a USB connection, then locating that apk file using the file folder browser and tapping on the icon. I could never get that to work, but it is supposed to work.
Failing that, you need to revisit NookManager. You must not have done the customization correctly if none of the apps you wanted were installed. If you can get that fixed, you can simply root again with NookManager (right on top of what you have now) and it will fix the problem IF you get it set up correctly.
There are four steps required to add an app to the NookManager rooting routine:
1. Copy the apk file to the folder files/data/app on the NookManager SD card
2. in the folder "scripts" on the NookManager SD card, copy and rename one of the "install_x" files so it represents the app you just moved into the folder in step 1. So, if you want ES File Explorer, you might rename the file "install_esfileexplorer"
3. Edit the file you just copied and renamed, changing the name of the apk file in the first line to exactly match the filename of the apk file you have replaced in files/data/app. So continuing the example, "es_file_explorer.apk" (which is the name of the apk file as I provided it). Then edit the "echo" statement so it reads something like "echo ES File Explorer installed"
4. Locate the file scripts/do_root. Copy and rename one of the "install_x" files so it matches what you did earlier, in this case "install_es_file_explorer". There are no contents to edit.
You need to do those four steps for each app you want to add to the install list. To remove an app you don't want (like the Amazon App Store), remove the apk file from files/data/app, remove the "install_x" file for that app from the folder "scripts", and remove the "install_x" file for that app from the file scripts/do_root.
Click to expand...
Click to collapse
\
I followed all your instructions above and successfully installed all apps. To summarise my observation after the successful installation:
1. Only Opera browser app and ES File Explorer app works
2. Yalp app store does not work at all - it just takes me to the next screen with options to 'update' or 'run'. Pressing update keeps searching forever and 'run' takes me back to the previous screen. After several tests, I decided to uninstall the app.
I tried to install youversion bible app which also works (but its a old version) so several features not available. But at least it works.
I noticed wifi outage issues intermittently on the opera browser and also once while trying the yalp store app. It said I was not connected, but I know for a fact I was connected when I connect to the Nook store etc.,
Overall, I am wondering what did I gain out of the whole process. Not much I can do with the custom installation. So I might return back to a original nook after playing with this setup for a while. This leaves me with couple of questions that I will start on a new thread.
Thanks again @nmyshkin for your patience in explaining.
S

To go back to original nook state - do I need to simply go into settings>Device Info> Erase & Deregister Device to get it back to out of box condition? Will this cancel the rooting?
Or do I have to stick the nook manager card and restore from backup?

sany said:
To go back to original nook state - do I need to simply go into settings>Device Info> Erase & Deregister Device to get it back to out of box condition? Will this cancel the rooting?
Or do I have to stick the nook manager card and restore from backup?
Click to expand...
Click to collapse
Erase and deregister will remove root and restore to out-of-the-box state unless you have done something serious. In that case, a factory re-image should solve the problem. That is done by powering off, then powering on and holding down the two lower hardware buttons as soon as the "Read Forever" screen appears. Wait for the prompt and follow it.
Re: Yalp Store, I just checked mine a minute ago and it's running fine. Very rarely it goes down and can't log in to the PlayStore, but it generally comes back later in the day.

Okay - so maybe I should try yalpstore at different times.