Looking to install the preview, just wondering what steps I have to follow to install the update? Looking to do a dirty install. Do I have to remove root and xposed? Does a systemless root allow updating with no issue?
Cheers!
I've also got TWRP installed which I imagine it wont like!
Were you able to install xposed on Android N beta?
I was able to install xposed but not the framework... But that's mainly because of twrp being stuck on the splash screen. I tried flashing the framework through flashfire but that didn't work.
Edit: spelling
http://forum.xda-developers.com/nexus-6p/general/how-to-switch-to-android-n-preview-t3409538
Sadly, you will need a decrypted device if you want a working twrp. Otherwise you can follow http://forum.xda-developers.com/nexus-6p/general/guide-android-nougat-developer-preview-t3410906
For just root.
As for xposed it has not been updated to have support for any developer preview as far as I am aware. If you find xposed as a need, I would recommend staying on Marshmallow!
not totally correct, you can flash the latest (6.0.1) vendor.img, flash TWRP, do whatever you need to do, then flash the N vendor.img and you have a working TWRP without a decrypted phone
@Vekhez if you look at the second link it is similar to that.
Hi everyone,
I have a s4 Active sgh i537. I want to have Lollipop and Xposed installed. To this end I flashed it back to Kitkat, towelroot'd it, flashed the I537_OC7_Stock_Rooted_Deodexed_ROM to preserve the root. I've tried to use the recovery option that comes with the rom to flash the Xposed framework and install the apk but Xposed said that the framework wasn't installed. Figured that the rom doesn't come with a custom recovery. Then I tried afterwards to flash the framework using flashfire the same way I flashed lollipop. The att splash screen load and got stuck for over 6 hours.
I'm going to try reflashing kitkat and starting over but I was wondering if I'm doing something wrong.
rom: http://forum.xda-developers.com/galaxy-s4-active/general/how-to-update-to-i537oc6-5-0-1-t3089355
Xposed framework SDK21 arm v86: http://dl-xda.xposed.info/framework/sdk21/arm/
Edit 1: went through again and I learned I needed the touchwiz Xposed Framework. Installed and my phone now can run Lollipop and install Xposed
New question regarding adb. I'm trying to install MicroG and I can't seem to connect adb and my phone together to remove the /system/priv-app/ and /system/app/ prerequisites any help with this would be extremely helpful
hope i am not violating any forum rules here, as i know how strict they can be. I am not a noob in this area, ive rooted and flashed all my phones since my droid x on. I miss my s-off HTC so bad. I did 5 minutes of research and thought all Galaxy S7s were bootloader/recovery unlockable...only to find out the american versions arent after im stuck with s Sprint SM-G930P. I was able to root and install xposed with the engineer boot.img and odin. Since TWRP or recovery isnt an option I have tried for months to systemless root this thing to hide root and pass safetynet. Ive tried flashfire to flash SU systemless 2.78SR5 and root switch and am on android 6.0.1 PE1 firmware following guides here: https://forum.xda-developers.com/sprint-galaxy-s7/how-to/sm-g930p-root-t3410604 but after factory reseting and trying Rootswitch (will hide exposed but not root with flashfire installing it since bootloader lock doesnt allow TWRP) I piddled with magisk but I am not on the Equinox unlockable s7 and am just at a loss here. Any one out there know of a way to hide root with this version of S7? Im out of ideas and any help here is appreciated. When i flashfire Supersu i get the locked out modified boot img error, but selecting AP and flashing the engineer boot img will get me back up rooted but root switch is a no go. I can use buildprop/rootzwitch to set selinux permissive sstatus but still fail. I refuse to let samsung not let me root my phone properly. I ser xposed modules like snorlax being updated so there seems to be a way to use xposed modules in PoGo while hiding root/xpised but every guide i see leads to TWRP instructions. Can i adb/terminal install magisk/rootswitch? and stiil use modules? (Cart before the horse question seeing as right now i cant bypass safetynet.) HELP!!
Have you made any more progress with this by chance?
Ok so I've been having a hell of a time with this phone so far. I have the boost mobile variant (xt1766). I unlocked the bootloader, installed twrp, but forgot to make a backup before flashing supersu, after which my phone would no longer boot so I flashed lineageOS. It booted up fine but I had no 3g connection so I wanted to go back to stock. I downloaded the stock firmware, but couldn't get RSD lite to install on my computer so I extracted all the files and flashed them manually with fastboot. After that my phone wouldnt boot and TWRP couldnt mount the data partition so I couldnt restore my lineage backups. I had to format the data partition in order to restore from backup but now I have nothing on internal storage, and my phone wont boot into system unless I boot into factory mode from the bootloader. It boots up fine in factory mode but now I have no network connection, no service whatsoever.
Under sim status it says Network: unknown, cellular network type: unknown, Service state: Radio Off, etc. I tried manually turning the radio on but that didn't work. I really just want to go back to stock but I don't understand how to accomplish this. I flashed everything in the firmware package in the correct order, and somehow it just rendered my phone useless. any help would be much appreciated. I've tried just about everything and I'm at a loss here.
Update:
I successfully got back to stock. For some reason executing the fastboot commands manually one at a time didn't work so I made a bat file with all the proper commands, executed it, and this time it worked. Not sure why it didn't work the other way but it might be because I didn't flash the stock recovery so as not to replace TWRP. Apparently when flashing firmware its all or nothing.
Are there any custom ROMs with 3G functionality for this device? Cuz so far every single one I've tried gets no network connection but this stock ROM is lame.
AMShiech said:
Are there any custom ROMs with 3G functionality for this device? Cuz so far every single one I've tried gets no network connection but this stock ROM is lame.
Click to expand...
Click to collapse
Not "lame" unless that's the latest descriptor for a reliable, fully functional, device optimized ROM that just works. If you want additional bling/tweaks flash Xposed framework and a few well regarded modules like GravityBox.
Alternatively, you can cycle through the various custom ROMs and decide which suite of compromises you're willing to live with. Suggest a careful read of the relevant ROM thread before diving in. Be sure to backup what works (including stock!) and store those nandroids on a SD card and/or off-device.
Good luck.
AMShiech said:
Update:
I successfully got back to stock. For some reason executing the fastboot commands manually one at a time didn't work so I made a bat file with all the proper commands, executed it, and this time it worked. Not sure why it didn't work the other way but it might be because I didn't flash the stock recovery so as not to replace TWRP. Apparently when flashing firmware its all or nothing.
Are there any custom ROMs with 3G functionality for this device? Cuz so far every single one I've tried gets no network connection but this stock ROM is lame.
Click to expand...
Click to collapse
That's because you're on boost, not many ROMs here have CDMA support. There is a fix in the help section. But stock is fine for me. Gravitybox and all features of any of the broken unofficial ROMs are all there. Rock solid, and LTE. But flash away dude.
madbat99 said:
That's because you're on boost, not many ROMs here have CDMA support. There is a fix in the help section. But stock is fine for me. Gravitybox and all features of any of the broken unofficial ROMs are all there. Rock solid, and LTE. But flash away dude.
Click to expand...
Click to collapse
I haven't been able to install the Xposed framework. Xposed installer says my CPU architecture is incompatible. When I flashed Xposed v89 for nougat my phone wouldn't boot past the boost logo. I keep hearing about people getting Xposed working on this device but I can't figure out how they're doing it. I would love to be able to have gravity box on this ROM.
Apparently the purityOS guys made an unofficial work around a while back but all the download links in that thread are dead and I can't find it anywhere else. It's my understanding that i need to be able to set selinux to permissive on boot in order to install Xposed.
AMShiech said:
I haven't been able to install the Xposed framework. Xposed installer says my CPU architecture is incompatible. When I flashed Xposed v89 for nougat my phone wouldn't boot past the boost logo. I keep hearing about people getting Xposed working on this device but I can't figure out how they're doing it. I would love to be able to have gravity box on this ROM.
Apparently the purityOS guys made an unofficial work around a while back but all the download links in that thread are dead and I can't find it anywhere else. It's my understanding that i need to be able to set selinux to permissive on boot in order to install Xposed.
Click to expand...
Click to collapse
No, regular Xposed. Wipe cache and dalvik, and wait. Let it sit 5 - 10 minutes. It has to optimize everything. Make sure it's the arm build. It works fine, just gotta let it sit. First boot takes a good bit.
Or use magisk, and install Xposed through that.
Do not use that old purity crap. That's why the links are dead. It's old crap. Xposed works fine with no extra steps or messing with selinux.
AMShiech said:
I haven't been able to install the Xposed framework. Xposed installer says my CPU architecture is incompatible. When I flashed Xposed v89 for nougat my phone wouldn't boot past the boost logo. I keep hearing about people getting Xposed working on this device but I can't figure out how they're doing it. I would love to be able to have gravity box on this ROM.
Apparently the purityOS guys made an unofficial work around a while back but all the download links in that thread are dead and I can't find it anywhere else. It's my understanding that i need to be able to set selinux to permissive on boot in order to install Xposed.
Click to expand...
Click to collapse
That's BS; don't overcomplicate things. Xposed framework installs fine in enforcing mode. Make sure you have the correct framework for Android 7.1 (SDK 25) and your hardware (arm). You will also need the corresponding management app. There is no need to wipe anything before/after flashing the framework although doing so can't hurt. First boot will take awhile; patience is a virtue.
Got Xposed working now with gravitybox and edge in full effect so this stock ROM is now much more tolerable. I guess I had the wrong version of Xposed installer and didn't wait long enough for boot to finish.
It broke safetynet though which I fully expected. I'd rather use the systemless Xposed magisk module so I can pass safetynet but I can't get any magisk modules to install successfully either through magisk or by flashing with TWRP. Apparently I'm not the only one having this issue either and it doesn't look like anyone has found a fix for it as of yet. I guess for now I'll have to live without Pokemon go lol
AMShiech said:
Got Xposed working now with gravitybox and edge in full effect so this stock ROM is now much more tolerable. I guess I had the wrong version of Xposed installer and didn't wait long enough for boot to finish.
It broke safetynet though which I fully expected. I'd rather use the systemless Xposed magisk module so I can pass safetynet but I can't get any magisk modules to install successfully either through magisk or by flashing with TWRP. Apparently I'm not the only one having this issue either and it doesn't look like anyone has found a fix for it as of yet. I guess for now I'll have to live without Pokemon go lol
Click to expand...
Click to collapse
Well yes there is most definitely a fix. Your problem is the f2fs loopback bug. Your solution is the f2fs loopback bug workaround module. It's in the magisk manager app. Download there, but install it in twrp. Then magisk modules will work. You must have halted your research a little early because this is well known, and posted in many places.
You still won't pass safetynet with systemless Xposed. Which a little reading would have also revealed. But, you can turn off Xposed in magisk , then reboot and pass safetynet. Do whatever it is you need safetynet for, then turn it back on and reboot. You must completely uninstall the Xposed you have to use magisk Xposed. You must use the Xposed installer APK that's linked in Xposed for magisk so it recognizes systemless Xposed. So uninstall Xposed with uninstaller zip, uninstall Xposed APK. Wipe caches. Then you can just go in magisk manager, scroll to the bottom of downloads, install Xposed sdk 25 module. Also Xposed installer APK linked 8n the readme that pops up when you click the Xposed module in magisk downloads. See screenshots below.
Also, there is more to pogo than safetynet. There is an entire thread devoted to it (more than one) in the magisk section of the forum.
You have a bit of reading to do in order to do the things you want. It's all very easy to find. You don't seem to be looking very hard.
madbat99 said:
Well yes there is most definitely a fix. Your problem is the f2fs loopback bug. Your solution is the f2fs loopback bug workaround module. It's in the magisk manager app. Download there, but install it in twrp. Then magisk modules will work. You must have halted your research a little early because this is well known, and posted in many places.
You still won't pass safetynet with systemless Xposed. Which a little reading would have also revealed. But, you can turn off Xposed in magisk , then reboot and pass safetynet. Do whatever it is you need safetynet for, then turn it back on and reboot. You must completely uninstall the Xposed you have to use magisk Xposed. You must use the Xposed installer APK that's linked in Xposed for magisk so it recognizes systemless Xposed. So uninstall Xposed with uninstaller zip, uninstall Xposed APK. Wipe caches. Then you can just go in magisk manager, scroll to the bottom of downloads, install Xposed sdk 25 module. Also Xposed installer APK linked 8n the readme that pops up when you click the Xposed module in magisk downloads. See screenshots below.
Also, there is more to pogo than safetynet. There is an entire thread devoted to it (more than one) in the magisk section of the forum.
You have a bit of reading to do in order to do the things you want. It's all very easy to find. You don't seem to be looking very hard.
Also I certainly hope that's not the app I think it is (the smiley face)? You're not allowed to promote or speak of that "warez" here. So screenshot is not a great idea.
Click to expand...
Click to collapse
I'm well aware that the problem is f2fs loopback but due to the bug I'm unable to install the fix. Can't install magisk modules so a fix in the form of a magisk module doesn't really help me. Ive tried installing it with TWRP a couple times with no success. As far as PoGo I've actually never even played that game. Was just curious about it.
And I'm not sure what app you're referring to but that "wow" face is a chrome shortcut. Changed it cuz I didn't like the default grey square.
AMShiech said:
I'm well aware that the problem is f2fs loopback but due to the bug I'm unable to install the fix. Can't install magisk modules so a fix in the form of a magisk module doesn't really help me. As far as PoGo I've actually never even played that game. Was just curious about it.
Click to expand...
Click to collapse
Trend continues; reread post you're disparaging. Or module OP. f2fs loopback 'fix' gets flashed in twrp or via fastboot (for the adventurous).
I edited my post shortly after your quote. Tried installing with TWRP more than once. Doesn't show up in magisk modules.
Just flashed with fastboot and now it seems to have worked. Fastboot for the win.
Maybe all caps will help out
go inside magisk manager> downloads search F2FS LOOPBACK BUG WORKAROUND, FLASH INSIDE TWRP!!! WILL NOT WORK IF ATTEMPTED TO FLASH THROUGH MAGISK MANAGER!!!!
I have Samsung Galaxy A500H running on armeabi-v7a CPU and my goal is to install Xposed framework and Xposed.
I run currently Android 6.0.1(Marshmallow) and i have been struggling for past 5 days to install Xposed.
Things i've done:
1. I rooted my phone trough Odin
Things i've tried:
1. Downloaded flashfire trough Google play store and flashed Xposed's .zips trough it but when i start Xposed app after boot i see that framework is still missing.
versions i tried flashing:
xposed-v89-sdk23-arm64.zip
xposed-v89-sdk23-arm.zip(gives boot loop)
xposed-v79-sdk23-arm.zip(gives boot loop)
so i assume i have arm64 instead as arm64 zip did not give me any boot loops.
2. Tried installing TWRP trough Odin but i get WRITE fail saying that i don't have memory.
Could someone please give me any direction on how can i actually install it? I really need it urgently ;(
Is it maybe that i'm downloading wrong zip version for my phone or what could be the issue?