Related
i installed merruk technology kernel pre 2.0 final ... and now want to restore back to default kernel(stock) .. i have ddle1 stock rom running....
i tried restoring to stock kernel provided there on merruk kernels page but the kernel wont remove help me please
if i could get boot.img from ddle1 rom i would be greatful ...
or can someone tell me how to extract it from .md5 flashable rom i have ( through odin )
and when i try to flash a stock rom (ddle1 for instance ) through odin it shows this error.. the picture is attached below
chotu222 said:
i installed merruk technology kernel pre 2.0 final ... and now want to restore back to default kernel(stock) .. i have ddle1 stock rom running....
i tried restoring to stock kernel provided there on merruk kernels page but the kernel wont remove help me please
if i could get boot.img from ddle1 rom i would be greatful ...
or can someone tell me how to extract it from .md5 flashable rom i have ( through odin )
and when i try to flash a stock rom (ddle1 for instance ) through odin it shows this error.. the picture is attached below
Click to expand...
Click to collapse
You have to select Modem and CSC files too I guess
avinash9441 said:
You have to select Modem and CSC files too I guess
Click to expand...
Click to collapse
I tried with MODEM and CSC also i got FAIL !!!!! at top left box :crying::crying::crying:
here plz help
you sure you picked all 3 files? shud be ok by then .
Sent from my GT-S5360 using xda app-developers app
chotu222 said:
I tried with MODEM and CSC also i got FAIL !!!!! at top left box :crying::crying::crying:
here plz help
Click to expand...
Click to collapse
Download and flash through odin DDLC2_ODDLA2_DDLC2 or DDLE1_DDLD1_DDLE1. Even I had problem with DDLA3_DDLA2_DDLA2.
Hope it works now.
hmmm
Im really confused, because if you flashed merruk kernel and it did not work then just download recovery kernel..
put phone in download mode (power+home+volume down)
plug phone to pc while odin is open
choose recovery kernel on PDA option (don't check or uncheck anything)
flash it and it should work... lol
Stock : http://www.mediafire.com/?dzfcrhb8fj3s40x
Terma Kernel ; http://www.mediafire.com/?81d1acx1c19m9k5
Test Kernel ; http://www.mediafire.com/?0j6guwgg60opj7y
-----------------------------
iplaygalaxyy for android
chotu222 said:
i installed merruk technology kernel pre 2.0 final ... and now want to restore back to default kernel(stock) .. i have ddle1 stock rom running....
i tried restoring to stock kernel provided there on merruk kernels page but the kernel wont remove help me please
if i could get boot.img from ddle1 rom i would be greatful ...
or can someone tell me how to extract it from .md5 flashable rom i have ( through odin )
and when i try to flash a stock rom (ddle1 for instance ) through odin it shows this error.. the picture is attached below
Click to expand...
Click to collapse
It was happened to me before.. I have no choice but to flash to a fresh STOCK ROM with stock Kernel.
The SOLUTION would be ODIN. Go to Doky's thread and select the latest version of your firmware based on your country - download and extract.
Here's his thread : http://forum.xda-developers.com/showthread.php?t=1465800
Now, download ODIN if you're not having it yet. here's the thread - credits to OP : http://forum.xda-developers.com/showthread.php?t=1464775
Here's the instruction on how to flash to STOCK ROM and Kernel. http://forum.xda-developers.com/showpost.php?p=21846668&postcount=2
I did formatted my sd card extent that time too hope it helps.
anyone can help
Restore to Stock Kernel
Download the stock kernel ...
In Odin choose PDA and select the kernel
Flash it in Download Mode....
guys
i can only give you my solution....i was on hells kernel #50 and i wanted to revert to stock.....
i tried DOKY73 sirs stock roms but they didnt work.
thus, my and my friend YASH 98 modded it and now it works perfectly....
simply use these instead of the stock on DOKY73s thread.
http://d-h.st/tjd
[ Tested ] [ worked when sir dokys failed ]
how to remove meruuk kernel from g s5360[[[[[[samsung glaxy y]]]]]]]]
my build is GINGERBREAD.DDLF2
BASEBAND version isS5360DDLF1
KERNEL IS 2.6.35.7 Merruk [email protected]
I want to revert back to my stock kernel.please tell me how to do this.
I can't update my phone because of it.
Flash stock rom via odin. U can get all the requirements at sir doky73's thread.
What u need :
1. Odin
2. Your own country's firmware and totoro_0623.pit ( find it on the web. )
3. Usb drivers
4. A pc
5. Samsung usb cable
Extract the zip file u downloaded of your country's firmware. Open the odin.exe on your pc (windows ), then pit option choose totoro.pit, boot option choose boot, phone choose modem file, pda choose pda.
Finished press volume down + home button + power button to download mode on samsung galaxy y. Then screen turns on press volume up again. Connect the usb cable to your phone to pc.
Then odin recognises your phone and shows a yellow thing on the top. Then press start and wait for it to boot up !
Remember to press thanks ya !
Sent from my GT-S5360 using xda app-developers app
That ,or you can flash stock kernel via flashable zip. I remember seeing one in hells fusion thread.
A_Reloaded said:
That ,or you can flash stock kernel via flashable zip. I remember seeing one in hells fusion thread.
Click to expand...
Click to collapse
from where can i get a flashable zip of stock kernel??????
Idk. Search...
Try to get a boot.img of stock kernel.
Then search for Sgybicwm.zip in general section. Put the stock boot.img in root of your sdcard and flash sgybicwm.zip via cwm. You are done.
Any other boot.img flasher like faqbly wont work. I just tried it with hells fusion 50. it has a stock kernels boot.img inside stock folder of the kernels zip. Get that and sgybicwm.zip
[Bruce Wayne] said:
Idk. Search...
Try to get a boot.img of stock kernel.
Then search for Sgybicwm.zip in general section. Put the stock boot.img in root of your sdcard and flash sgybicwm.zip via cwm. You are done.
Any other boot.img flasher like faqbly wont work. I just tried it with hells fusion 50. it has a stock kernels boot.img inside stock folder of the kernels zip. Get that and sgybicwm.zip
Click to expand...
Click to collapse
PLEASE HELP ME. I TRIED TO INSTALL STOCK KENEL BY APPLYING ZIP IN CLOCKORKMOD.
THE SITE WAS GALAXY4GAMING.COM. IT TOLD ME TO WIPE DATA AND CACHE AND THEN INSTAAL ZIP. I DO THAT.IT SAYS INSTALLATION IS ABORTED. I GET BORED AND REBOOT MY PHONE. WHEN I REBOOT IT ,,IT ONLY SHOWS A BLOCK ELCOME SCREEN WIH GALAXY Y WRITTEN ON IT AND DOES NOT DO ANYHING.IT SHOWS IT FOR HOURS AND HOURS.PLESE HELP AND TELL ME WHAT TO DO.:crying::crying::crying:
YES He is right this is a good method of flashing the stock kernel instead of flashing the whole firmware again.
GT S5360
Rom - Jelly Blast v4.0.5
Kernel - Marroc v2.0 Final
Overclocked - 1.2 GHz
Undervolted - -100 mV
Battery - 3200 mAh
SD Card - 32 GB class 10
Swap - 256 MB
SD / EXT - 2 GB ext 3
apoorva.97 said:
PLEASE HELP ME. I TRIED TO INSTALL STOCK KENEL BY APPLYING ZIP IN CLOCKORKMOD.
THE SITE WAS GALAXY4GAMING.COM. IT TOLD ME TO WIPE DATA AND CACHE AND THEN INSTAAL ZIP. I DO THAT.IT SAYS INSTALLATION IS ABORTED. I GET BORED AND REBOOT MY PHONE. WHEN I REBOOT IT ,,IT ONLY SHOWS A BLOCK ELCOME SCREEN WIH GALAXY Y WRITTEN ON IT AND DOES NOT DO ANYHING.IT SHOWS IT FOR HOURS AND HOURS.PLESE HELP AND TELL ME WHAT TO DO.:crying::crying::crying:
Click to expand...
Click to collapse
Stop using all caps mate.
Keep kalm and use odin.
Can you go to recovery mode?
And download mode?
Try to give as much info as you can. So that people here can assist you better.
[Bruce Wayne] said:
Stop using all caps mate.
Keep kalm and use odin.
Can you go to recovery mode?
And download mode?
Try to give as much info as you can. So that people here can assist you better.
Click to expand...
Click to collapse
i dont know what is download mode. i cant go in recovery mode too. its my fisrtt mobile.only passed 3 months with it . o god i am crying:crying::crying::crying::crying::crying::crying:
Ok.
Here is what you need to do.
Download a stock rom from dock73's thread from dev section (its a sticky one, so no trouble in finding it).
Then download odin3 v1.85 from same thread.
Get samsung mobile device drivers.
Install drivers first.
Then extract all those zips (rom and odin ) in a separate folder.
Open odin.exe.
Then switch off your phone (pull battery if nothing works).
Press Volume down + Power + Home Buttons All at same time
You will be I'm download mode.
Press volume up and connect your phone to pc with data cable.
You will see a yellow signal on odin screen. Dont change anything and just add those files from the firmwares you extracted in the folder.
Csc.tar.md5 for csc
Modem.tar.md5 for phone
And
pda.tar.md5 for pda
Click on start and it will show a pass to you when completed.
Hope that complets all for you.
If you still dont get head over to docky thread.
And see 2nd post.
My phone have
Custom Binary count: No.
Device status: Official.
In the setting>about device>status>device status:Normal. Now, I'm getting on 4.1.2 from MJ5 4.3. I used the followings
1. flash the respective official 4.1.2 firmware from sammobile.com. after finish flashing , go to recovery mode and wipe data.
2. flash Philz recovery via Odin.
3. install updated 4.1.2 modem (XXDME4 / DXDMF1 / DDMG1) from http://forum.xda-developers.com/showthread.php?t=2044937 via CWM (at this step you should get IMEI back.)
4. root the device with CF-auto root.(CF-Auto-Root-t03g-t03gxx-gtn7100.tar)
5. install Triangle away to reset flash counter.
6. full unroot super SU
7. wipe all data/factory reset .
Check the device status in setting. And then go to download mode to check again.
I'm not sure is this steps working on every Galaxy note 2 N7100. But actually I've been downgraded to 4.1.2 and I can get OTA also (already checked).
I decided to downgrade my N7100 because most of the custom roms use high RAM usage.
When at the firmware upgrade fail status,
1. Just flash "Philz recovery" via Odin.
2. After finished, Long press Vol up + Home + Power button to get into recovery mode.
3. Choose Wipe data/factory reset and "CLEAN TO IN STALL NEW ROM"
All of this step finished, Go to download mode "Vol down + Home + Power button" and flash the firmware (4.3 or 4.1.2 again).
NOTICE.
Dear all,
The latest 4.3 official firmware (MK4 or later ) has KNOX enabled bootloader and can't be downgrade. So, don't try to downgrade If your bootloader is KNOX enabled.
[email protected] said:
My phone have
Custom Binary count: No.
Device status: Official.
In the setting>about device>status>device status:Normal. Now, I'm getting on 4.1.2 from MJ5 4.3. I used the followings
1. flash the respective official firmware from sammobile.com
2. flash Philz recovery via Odin.
3. install respective modem from http://forum.xda-developers.com/showthread.php?t=2044937 via CWM (at this step you should get IMEI back.)
4. root the device with CF-auto root.
5. install Triangle away to reset flash counter.
6. flash Dr.ketan multitool to restore old recovery.
7. full unroot super SU
8. wipe all data/factory reset .
Check the device status in setting. And then go to download mode to check again.
I'm not sure is this steps working on every Galaxy note 2 N7100. But actually I've been downgraded to 4.1.2 and I can get OTA also (already checked).
Click to expand...
Click to collapse
I tried this today but failed, my questions are:
1. flash the respective official firmware from sammobile.com (What firm you flashed? post please a link)
2. flash Philz recovery via Odin. (I asumme you writed this file philz_touch_5.15.0-n7100.tar.md5
3. install respective modem from http://forum.xda-developers.com/showthread.php?t=2044937 via CWM (at this step you should get IMEI back.) what modem exactly?
4. root the device with CF-auto root. (What version of CF-auto root?)
Thank you for clarifications!
Remove KNOX bootloader to return to stock - using Dr. Ketan Method
Hi Guys,
I just want you opinion before i do this step. Hence asking
KNOX enabled boot loader has messed up my idea of return to Stock either via KIES or via ODIN.
I flashed the official Indian 4.3 ROM on my EU model NOTE 2 over the leaked ROM with MJ5 and it failed. I couldn't recover the phone with KIES either.
KIES will say that firmware update / emergency recovery has encounterd an error.
ODIN says FAIL and "Device Unsupported" appears in Download screen.
Shall i try Dr. Ketan's KNOX bootloader removal method to get my mobile back ? ( http://forum.xda-developers.com/showthread.php?t=2500823 )
Can i then flash the original firmware N7100XXDMF1 on my Note 2 (EU version) ?
Would appreciate if you guys could help me on this.
I can still access the download mode with KNOX boot loader.
Thanks
Raklm said:
I tried this today but failed, my questions are:
1. flash the respective official firmware from sammobile.com (What firm you flashed? post please a link)
2. flash Philz recovery via Odin. (I asumme you writed this file philz_touch_5.15.0-n7100.tar.md5
3. install respective modem from http://forum.xda-developers.com/showthread.php?t=2044937 via CWM (at this step you should get IMEI back.) what modem exactly?
4. root the device with CF-auto root. (What version of CF-auto root?)
Thank you for clarifications!
Click to expand...
Click to collapse
for the questions, regarding to...
1. I used the "N7100XXDME1_N7100OLBDMD2_N7100DXDLK5_HOME.tar"
2. "philz_touch_5.15.0-n7100.tar "
3. I used "modem_XXDME4" and get IMEI back at this stage.
4. CF auto root "CF-Auto-Root-t03g-t03gxx-gtn7100.tar"
I will attach all respective screenshots later because of my slow connection . ENJOY!
Raklm said:
I tried this today but failed, my questions are:
1. flash the respective official firmware from sammobile.com (What firm you flashed? post please a link)
2. flash Philz recovery via Odin. (I asumme you writed this file philz_touch_5.15.0-n7100.tar.md5
3. install respective modem from http://forum.xda-developers.com/showthread.php?t=2044937 via CWM (at this step you should get IMEI back.) what modem exactly?
4. root the device with CF-auto root. (What version of CF-auto root?)
Thank you for clarifications!
Click to expand...
Click to collapse
Please, tell us where (which step) you failed, to avoid future misunderstandings.
==
TomeG2kc
I am using Indian 4.3 rom on my EU device (N7100 Note 2)
It use Know enabled Bootloader.
* When I try to flash MJ5 bootloader with Odin, it failed. (incorrect version)
* When I try to flash EU 4.1.2 rom with Odin, it failed. (incorrect version)
Is there a way to downgrade to EU 4.1.2 rom? I guess NO
hsahin4 said:
I am using Indian 4.3 rom on my EU device (N7100 Note 2)
It use Know enabled Bootloader.
* When I try to flash MJ5 bootloader with Odin, it failed. (incorrect version)
* When I try to flash EU 4.1.2 rom with Odin, it failed. (incorrect version)
Is there a way to downgrade to EU 4.1.2 rom? I guess NO
Click to expand...
Click to collapse
Try change Odin to 3.09 version, maybe this help.
Wysłane z mojego GT-N7100 przy użyciu Tapatalka
hsahin4 said:
I am using Indian 4.3 rom on my EU device (N7100 Note 2)
It use Know enabled Bootloader.
* When I try to flash MJ5 bootloader with Odin, it failed. (incorrect version)
* When I try to flash EU 4.1.2 rom with Odin, it failed. (incorrect version)
Is there a way to downgrade to EU 4.1.2 rom? I guess NO
Click to expand...
Click to collapse
Right now, there is no way ti downgrade the bootloader once you've updated to the official 4.3... however dr. Ketan said he will start to work on it soon
Sent from my GT-N7100 using XDA Premium 4 mobile app
manan999583 said:
Right now, there is no way ti downgrade the bootloader once you've updated to the official 4.3... however dr. Ketan said he will start to work on it soon
Sent from my GT-N7100 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
So, what is that below?
[email protected] said:
My phone have
Custom Binary count: No.
Device status: Official.
In the setting>about device>status>device status:Normal. Now, I'm getting on 4.1.2 from MJ5 4.3. I used the followings
1. flash the respective official firmware from sammobile.com. after finish flashing , go to recovery mode and wipe data.
2. flash Philz recovery via Odin.
3. install updated 4.1.2 modem (XXDME4 / DXDMF1 / DDMG1) from http://forum.xda-developers.com/showthread.php?t=2044937 via CWM (at this step you should get IMEI back.)
4. root the device with CF-auto root.(CF-Auto-Root-t03g-t03gxx-gtn7100.tar)
5. install Triangle away to reset flash counter.
6. full unroot super SU
7. wipe all data/factory reset .
Check the device status in setting. And then go to download mode to check again.
I'm not sure is this steps working on every Galaxy note 2 N7100. But actually I've been downgraded to 4.1.2 and I can get OTA also (already checked).
I decided to downgrade my N7100 because most of the custom roms use high RAM usage.
Click to expand...
Click to collapse
Wysłane z mojego GT-N7100 przy użyciu Tapatalka
This is only for the at&t at the moment but it might be of some use
http://forum.xda-developers.com/showthread.php?t=2502464
Sent from my GT-N7105 using XDA Premium 4 mobile app
prasanthkb said:
Hi Guys,
I just want you opinion before i do this step. Hence asking
KNOX enabled boot loader has messed up my idea of return to Stock either via KIES or via ODIN.
I flashed the official Indian 4.3 ROM on my EU model NOTE 2 over the leaked ROM with MJ5 and it failed. I couldn't recover the phone with KIES either.
KIES will say that firmware update / emergency recovery has encounterd an error.
ODIN says FAIL and "Device Unsupported" appears in Download screen.
Shall i try Dr. Ketan's KNOX bootloader removal method to get my mobile back ? ( http://forum.xda-developers.com/showthread.php?t=2500823 )
Can i then flash the original firmware N7100XXDMF1 on my Note 2 (EU version) ?
Would appreciate if you guys could help me on this.
I can still access the download mode with KNOX boot loader.
Thanks
Click to expand...
Click to collapse
Same problem here
I flashed the 4.3 indian version. After 40 minutes it doesn't finished and my laptop battery is discharged. When i switch on the phone, it shows me the message error "firmware upgrade encountered".
Kies doesn't work.
I'm not able to enter in the recovery mode. I'm able to enter in the download mode. If i try to flash the rom again with odin, it shows me this error:
Any suggestion? thanks
flash recovery thru odin then maybe restore a nand backup or flash the new rom via cwm
So is there some other here already tried this step and got success??? please post location and if your from custom rom or from official rom? thanks
prasanthkb said:
Hi Guys,
I just want you opinion before i do this step. Hence asking
KNOX enabled boot loader has messed up my idea of return to Stock either via KIES or via ODIN.
I flashed the official Indian 4.3 ROM on my EU model NOTE 2 over the leaked ROM with MJ5 and it failed. I couldn't recover the phone with KIES either.
KIES will say that firmware update / emergency recovery has encounterd an error.
ODIN says FAIL and "Device Unsupported" appears in Download screen.
Shall i try Dr. Ketan's KNOX bootloader removal method to get my mobile back ? ( http://forum.xda-developers.com/showthread.php?t=2500823 )
Can i then flash the original firmware N7100XXDMF1 on my Note 2 (EU version) ?
Would appreciate if you guys could help me on this.
I can still access the download mode with KNOX boot loader.
Thanks
Click to expand...
Click to collapse
dbanzon said:
flash recovery thru odin then maybe restore a nand backup or flash the new rom via cwm
Click to expand...
Click to collapse
I'm able to flash the recovery thru odin, just do it and now i'm able to boot in recovery mode.
But i'm not able to flash the new rom via cwm because i'm not able to mount the sd card (it works only as usb storage, not as sd card mode and so i'm not able to upload the rom file on it).
I can find a solution for this, but i'm not sure it will work because now i have the knox firmware (warranty bit 1) and it isn't downgradable. Am i right?
thanks
I had to restore my efs data in order to downgrade back to 4.1.2.
Sent from my GT-N7100 using Tapatalk
EP2008 said:
I had to restore my efs data in order to downgrade back to 4.1.2.
Sent from my GT-N7100 using Tapatalk
Click to expand...
Click to collapse
so how were you able to dngrade back to 4.1.2? u followed the instructions in the first post?
Downgrading from 4.3
[email protected] said:
1. flash the respective official firmware from sammobile.com. after finish flashing , go to recovery mode and wipe data.
2. flash Philz recovery via Odin.
3. install updated 4.1.2 modem (XXDME4 / DXDMF1 / DDMG1) from http://forum.xda-developers.com/showthread.php?t=2044937 via CWM (at this step you should get IMEI back.)
4. root the device with CF-auto root.(CF-Auto-Root-t03g-t03gxx-gtn7100.tar)
5. install Triangle away to reset flash counter.
6. full unroot super SU
7. wipe all data/factory reset .
.[/B][/COLOR]
Click to expand...
Click to collapse
Hi, in step 1. Is it official 4.3 or 4.1.2 because I tried with official 4.1.2, I get failed.
dbanzon said:
so how were you able to dngrade back to 4.1.2? u followed the instructions in the first post?
Click to expand...
Click to collapse
I don't recall the exact steps, but I flashed my old 4.1.2 stock rom through philz recovery then ran the efs restore through dr. Ketans multi tool. Before the efs restore I would get boot loops at the Samsung logo.
Sent from my GT-N7100 using Tapatalk
diaBoliQu3 said:
Hi, in step 1. Is it official 4.3 or 4.1.2 because I tried with official 4.1.2, I get failed.
Click to expand...
Click to collapse
Do full wipe and try that again.
19malag83 said:
I'm able to flash the recovery thru odin, just do it and now i'm able to boot in recovery mode.
But i'm not able to flash the new rom via cwm because i'm not able to mount the sd card (it works only as usb storage, not as sd card mode and so i'm not able to upload the rom file on it).
I can find a solution for this, but i'm not sure it will work because now i have the knox firmware (warranty bit 1) and it isn't downgradable. Am i right?
thanks
Click to expand...
Click to collapse
Follow the instructions in the link, it should solve your problems. I had the same problem some days back.
http://www.droidviews.com/firmware-upgrade-encountered-an-issue-solution/
Hello guys,
I need your help again!
I recently changed my i9100g with this other device, GT-I9505 Italian version, no brand.
The history of this device was quite this: stock FW until 4.3 (just my suppose) --> CM11 --> try to flash 4.2.2 stock --> brick @[email protected]
Now I tried to put the original 4.4.2 firmware by flashing with Odin v3.09, because I don't want custom rom for the moment, just make it work.
The problem is that the phone stucks at Samsung logo, and when I tried to go in recovery mode, it stays on the same logo but there's a blue write in the top left corner "Recovery Booting".
Do you have any suggestion?
TY in advance
Drake9090 said:
Hello guys,
I need your help again!
I recently changed my i9100g with this other device, GT-I9505 Italian version, no brand.
The history of this device was quite this: stock FW until 4.3 (just my suppose) --> CM11 --> try to flash 4.2.2 stock --> brick @[email protected]
Now I tried to put the original 4.4.2 firmware by flashing with Odin v3.09, because I don't want custom rom for the moment, just make it work.
The problem is that the phone stucks at Samsung logo, and when I tried to go in recovery mode, it stays on the same logo but there's a blue write in the top left corner "Recovery Booting".
Do you have any suggestion?
TY in advance
Click to expand...
Click to collapse
Flash the stock rom again..and do NOT check autoreboot in odin.
The straight away boot into recovery, factory reset it..and you'll boot
"If someone helps, never forget to hit thanks ? "
DeepankarS said:
Flash the stock rom again..and do NOT check autoreboot in odin.
The straight away boot into recovery, factory reset it..and you'll boot
"If someone helps, never forget to hit thanks ? "
Click to expand...
Click to collapse
Thank you very much for your reply!
It doesn't work, maybe I'm just doing something wrong, what should I have to do after flash?
Drake9090 said:
Thank you very much for your reply!
It doesn't work, maybe I'm just doing something wrong, what should I have to do after flash?
Click to expand...
Click to collapse
-Open odin
-Uncheck autoreboot
-Add your firmware file to the AP/PDA section
-Start the process
When this will end, your ohone wont boot automatically (obviously)
After 2-3 minutes start it, if it turns on properly congo..
If it doesnt..just boot into recovery (volume up+home button+power button) and perform a data wipe.
If this does not helo at all, download the LATEST KITKAT 4.4.2 UNBRANDED again for your phone as it can be a bad download issue too.
"If someone helps, never forget to hit thanks ? "
DeepankarS said:
-Open odin
-Uncheck autoreboot
-Add your firmware file to the AP/PDA section
-Start the process
When this will end, your ohone wont boot automatically (obviously)
After 2-3 minutes start it, if it turns on properly congo..
If it doesnt..just boot into recovery (volume up+home button+power button) and perform a data wipe.
If this does not helo at all, download the LATEST KITKAT 4.4.2 UNBRANDED again for your phone as it can be a bad download issue too.
"If someone helps, never forget to hit thanks ? "
Click to expand...
Click to collapse
I would try another firmware less recent, just to see what happens...
But I have great news: Philz touch works, so now I have a working custom recovery!
the problem is that I can't just flash a custom ROM to repair
I think I need the pit file, but I can't find one on the internet @[email protected]
Drake9090 said:
I would try another firmware less recent, just to see what happens...
But I have great news: Philz touch works, so now I have a working custom recovery!
the problem is that I can't just flash a custom ROM to repair
I think I need the pit file, but I can't find one on the internet @[email protected]
Click to expand...
Click to collapse
Y do you need a pit? Pit files are not to be played with and can possibly brick if not flashed with utmost care.
Try a stock firmware first. Dont try any stock firmware till you have a working phone..
"If someone helps, never forget to hit thanks ? "
DeepankarS said:
Y do you need a pit? Pit files are not to be played with and can possibly brick if not flashed with utmost care.
Try a stock firmware first. Dont try any stock firmware till you have a working phone..
"If someone helps, never forget to hit thanks ? "
Click to expand...
Click to collapse
I'm flashing this firmware: I9505XXUGNG8_I9505ITVGNG1_ITV
I was thinking about pit because the philz says strange errors:
failed to mount /data to setup /data/media, or something like this... and also other problems related to /sdcard
Have you an idea on what to do?
I'm just following this guide: http://forum.xda-developers.com/showthread.php?t=2265477
Drake9090 said:
I'm flashing this firmware: I9505XXUGNG8_I9505ITVGNG1_ITV
I was thinking about pit because the philz says strange errors:
failed to mount /data to setup /data/media, or something like this... and also other problems related to /sdcard
Have you an idea on what to do?
I'm just following this guide: http://forum.xda-developers.com/showthread.php?t=2265477
Click to expand...
Click to collapse
The pit file is right there in @samersh72s thread
In the attachments.
Flash properly after reading the OP very carefully and DO NOT SKIP ANY STEP OR MODIFY any
Still IMHO a data wipe after reflashing can fix your bootloop.
"If someone helps, never forget to hit thanks ? "
DeepankarS said:
The pit file is right there in @samersh72s thread
In the attachments.
Flash properly after reading the OP very carefully and DO NOT SKIP ANY STEP OR MODIFY any
Still IMHO a data wipe after reflashing can fix your bootloop.
"If someone helps, never forget to hit thanks ? "
Click to expand...
Click to collapse
I thought the same way too, but didn't work...
The attachment doesn't work, but some posts later there is one working
I'll try and let you know the results!
Stll locked here...
Used yhe pit file, but nothing changed
in Philz Touch 6 with CWM 6.0.4.7 I have this error:
E: could not mount /data to setup /data/media path!
Have you ever faced it?
Drake9090 said:
Used yhe pit file, but nothing changed
in Philz Touch 6 with CWM 6.0.4.7 I have this error:
E: could not mount /data to setup /data/media path!
Have you ever faced it?
Click to expand...
Click to collapse
Ermm no...
@Lennyz1988 @MAX 404
Help?
Sent from my GT-I9500 using XDA Free mobile app
I was thinking about a possible cause: could it be that I'm using a wrong firmware?
this device is used, so I supposed that it was ITV the correct firmware, but not 100% sure...
I'm just sure that it is no-brand.
Drake9090 said:
I was thinking about a possible cause: could it be that I'm using a wrong firmware?
this device is used, so I supposed that it was ITV the correct firmware, but not 100% sure...
I'm just sure that it is no-brand.
Click to expand...
Click to collapse
Screenshots of "phone info samsung" app please.
"If someone helps, never forget to hit thanks ?"
When you flash the Odin firmware it's succesfull?
DeepankarS said:
Screenshots of "phone info samsung" app please.
"If someone helps, never forget to hit thanks ?"
Click to expand...
Click to collapse
The only info that I'm able to see are the ones in download mode...
If the phone don't boot any firmware, how can I use that app?
Lennyz1988 said:
When you flash the Odin firmware it's succesfull?
Click to expand...
Click to collapse
Yes, or better to say, Odin says PASS, but when I reboot (even with or without Auto-Reboot flag) the phone stucks on Samsung Logo saying Recovery Booting.
DeepankarS said:
The pit file is right there in @samersh72s thread
In the attachments.
Flash properly after reading the OP very carefully and DO NOT SKIP ANY STEP OR MODIFY any
Still IMHO a data wipe after reflashing can fix your bootloop.
"If someone helps, never forget to hit thanks ? "
Click to expand...
Click to collapse
Drake9090 said:
Yes, or better to say, Odin says PASS, but when I reboot (even with or without Auto-Reboot flag) the phone stucks on Samsung Logo saying Recovery Booting.
Click to expand...
Click to collapse
On top of all advice given here...
Can you boot at all? what is the status at the moment , rom recovery?
I would try to flash a recovery first ( twrp , philz) see if it works , do a factory reset ( backup first) and try flashing a stock rom,,see if it helps
MAX 404 said:
On top of all advice given here...
Can you boot at all? what is the status at the moment , rom recovery?
I would try to flash a recovery first ( twrp , philz) see if it works , do a factory reset ( backup first) and try flashing a stock rom,,see if it helps
Click to expand...
Click to collapse
The situation is still the same, so in order:
I cannot boot a complete system, I just stuck on samsung i9505 logo with blue "Recovery Booting" written in top-left on the screen;
At the moment I'm reflashing ossessively the stock rom, and philz touch; I can go in DL mode and not in the stock recovery, but when I flash philz touch I can enter by double clicking vol up when I see the blue, red and yellow writes.
I cannot do a factory reset, that is the real problem I suppose, 'cause when I enter in philz recovery, it says: "error mount /data etc etc..." as you can see in previous posts.
In DL mode this is the situation:
PN: GT-I9505
Current binary: Samsung Official
System Status: Custom
Knox Kernel Lock: 0x0
Knox Warranty Void: 0x1
csb-config-lsb: 0x30
write prot: enabled
eMMC Burst mode enabled
Drake9090 said:
The situation is still the same, so in order:
I cannot boot a complete system, I just stuck on samsung i9505 logo with blue "Recovery Booting" written in top-left on the screen;
At the moment I'm reflashing ossessively the stock rom, and philz touch; I can go in DL mode and not in the stock recovery, but when I flash philz touch I can enter by double clicking vol up when I see the blue, red and yellow writes.
I cannot do a factory reset, that is the real problem I suppose, 'cause when I enter in philz recovery, it says: "error mount /data etc etc..." as you can see in previous posts.
In DL mode this is the situation:
PN: GT-I9505
Current binary: Samsung Official
System Status: Custom
Knox Kernel Lock: 0x0
Knox Warranty Void: 0x1
csb-config-lsb: 0x30
write prot: enabled
eMMC Burst mode enabled
Click to expand...
Click to collapse
Lets go one step at the time.........forget about recovery for now
Flashing with Odin a stock rom ( use same rom you had before or newer) , what happen? did you followed the guide
http://forum.xda-developers.com/show....php?t=2265477 that @DeepankarS suggested ? did you flash the PIT file?
MAX 404 said:
Lets go one step at the time.........forget about recovery for now
Flashing with Odin a stock rom ( use same rom you had before or newer) , what happen? did you followed the guide
http://forum.xda-developers.com/show....php?t=2265477 that @DeepankarS suggested ? did you flash the PIT file?
Click to expand...
Click to collapse
Followed that guide many times, but the result is stuck in Samsung Logo.
Even tried flashing PIT file, but nothing changed.
maybe flash just a stock recovery after the firmware could solve the problem?
Many of you might be getting INVALID IMEI after flashing any custom rom or After formating Your Rom
THis IS Guide is Help You
I see Many Method TO Get BAck Imei
But Trust Me THis is Very Easy Method
ANd AND Important MAny Of Who Are in MIcromax A120 8GB C2C kitkat After MAny try They Can't Root there phone But via THis Method Wil You
INSTRUCTION
1.IF YOu Are In Kitkat Than Flash YOur Phone With JellyBean
2. Root Your Phone With Farmaroot
3.THan INstall A CWM via UNcle Tool
4. THan GO in Recovery Flash FOTA KITKAT ROM
5.Now YOu see YOu are in stock kitkat ROm And YOur ROm IS Rooted
NOW IMportant
6.Open THe MTK Droid Root & Tools v2.5.3 Give them A Root Access BY Clicking ROOT
7. Now THe pop up IS Open CLick Ok
8.Now Grant the access From Your Phone
9.Now YOur Phone IS Connected
10.NOw CLick On a NVRAM/IMEI
11 NOw A Pop Up open Enter Your IMEI No. And CLick ON A Replace Imei ANd NOw Restart Your Phone
THat Sit Now YOur IMEI BAck
I know IS Somthing Lengthy But it is Safe And Simple
THanks TO UMAngLekha
HE MAde A FLashable FOTA Kitkat ROm
Downloads
http://forum.xda-developers.com/android/development/rom-canvas-2-colours-t2866498FOTA KITKATROM
http://d-h.st/PAnFarmaRoot
Flash ON YOur Risk
And DO On Your RIsk
iF YOU know Already how to FLash A Rom \ THen THere IS No RIsk
IF YOu LIke MY POSt HIt ON LIKe Boutton
Need help
I am not even able to flash CTR recovery how come I even try flashing JB ROM.
I am on A120 Stock 4.4.2 (8 GB Variant) and while trying to flash recovery, I am getting the error as "PMT changed for the ROM it must be downloaded"
Please see attached screen shot.
Nice
Thanks
kool_sandy said:
I am not even able to flash CTR recovery how come I even try flashing JB ROM.
I am on A120 Stock 4.4.2 (8 GB Variant) and while trying to flash recovery, I am getting the error as "PMT changed for the ROM it must be downloaded"
Please see attached screen shot.
Click to expand...
Click to collapse
First go to sp flash tool then click on format option then click on start..
Now connect your device without battery.
After format process done, you have no any wrong message appering in process of flashing.
Sorry for bad English.
If your probl. Solve, then hit like..
kool_sandy said:
I am not even able to flash CTR recovery how come I even try flashing JB ROM.
I am on A120 Stock 4.4.2 (8 GB Variant) and while trying to flash recovery, I am getting the error as "PMT changed for the ROM it must be downloaded"
Please see attached screen shot.
Click to expand...
Click to collapse
Choose the scatter file that came with the downloaded zip
Cheers
Ain't that a bit much work for new IMEI's?
I found the easiest way to (temporarily) fix the IMEI is like this: http://meandmywiko.blogspot.de/2016/04/wiko-rainbow-repair-fix-invalid-imei.html
Only thing you need is root (delivered on stock at CM13). If you still have problems to get through to your phone: My phone recently went totally black ( no charging lights, no nothing ) and I fixed it like also descripted on the blog.
mnksngh706 said:
Many of you might be getting INVALID IMEI after flashing any custom rom or After formating Your Rom
THis IS Guide is Help You
I see Many Method TO Get BAck Imei
But Trust Me THis is Very Easy Method
ANd AND Important MAny Of Who Are in MIcromax A120 8GB C2C kitkat After MAny try They Can't Root there phone But via THis Method Wil You
INSTRUCTION
1.IF YOu Are In Kitkat Than Flash YOur Phone With JellyBean
2. Root Your Phone With Farmaroot
3.THan INstall A CWM via UNcle Tool
4. THan GO in Recovery Flash FOTA KITKAT ROM
5.Now YOu see YOu are in stock kitkat ROm And YOur ROm IS Rooted
NOW IMportant
6.Open THe MTK Droid Root & Tools v2.5.3 Give them A Root Access BY Clicking ROOT
7. Now THe pop up IS Open CLick Ok
8.Now Grant the access From Your Phone
9.Now YOur Phone IS Connected
10.NOw CLick On a NVRAM/IMEI
11 NOw A Pop Up open Enter Your IMEI No. And CLick ON A Replace Imei ANd NOw Restart Your Phone
THat Sit Now YOur IMEI BAck
I know IS Somthing Lengthy But it is Safe And Simple
THanks TO UMAngLekha
HE MAde A FLashable FOTA Kitkat ROm
Downloads
http://forum.xda-developers.com/android/development/rom-canvas-2-colours-t2866498FOTA KITKATROM
http://d-h.st/PAnFarmaRoot
Flash ON YOur Risk
And DO On Your RIsk
iF YOU know Already how to FLash A Rom \ THen THere IS No RIsk
IF YOu LIke MY POSt HIt ON LIKe Boutton
Click to expand...
Click to collapse
You can try it via Engineer Mode available in MTK Devices
Please need all your help for my problem
my G531H stuck at boot screen ("Samsung Galaxy Grand Prime Powered By Android")
I have flash it via odin with different Firmware/Odin and different pc even different usb cable but it's still not worked
i try to get into recovery mode but it can not pass the bootscreen
i try flash a cwm/twrp via odin but what i get is "recovery not seandroid enforcing"
Is there any solution from you guys, any help will be appreciated
here is the screenshot
Try to install kitkat 4.4.x wait if it works go to the settings -> about phone->quickly tap 7 times on Build number and go to developer options and enable usb debug, then flash LL 5.1.1 firmware.
If after flashing kitkat it still don't boots. Go to recovery if it works and wipe everything what u can wipe in stock recovery after it go to download mode and install LL 5.1.1
If recovery don't works just flash LL 5.1.1 after Kitkat.
And stop doin' everything which u don't know and don't understand. If u don't know how to do just ask a guide bro in this forum everyone will help you.
Sorry for bad english.
JamsheeeD said:
Try to install kitkat 4.4.x wait if it works go to the settings -> about phone->quickly tap 7 times on Build number and go to developer options and enable usb debug, then flash LL 5.1.1 firmware.
If after flashing kitkat it still don't boots. Go to recovery if it works and wipe everything what u can wipe in stock recovery after it go to download mode and install LL 5.1.1
If recovery don't works just flash LL 5.1.1 after Kitkat.
And stop doin' everything which u don't know and don't understand. If u don't know how to do just ask a guide bro in this forum everyone will help you.
Sorry for bad english.
Click to expand...
Click to collapse
Thanks for your answer mate
I think the problem is when i flash firmware via odin i checked the "Nand erase all" (My Bad, shouldn't do it)
Is there any solution for this, i read in some forum a pit file need to flash after doing "nand erase all"
pandiliverpool said:
Thanks for your answer mate
I think the problem is when i flash firmware via odin i checked the "Nand erase all" (My Bad, shouldn't do it)
Is there any solution for this, i read in some forum a pit file need to flash after doing "nand erase all"
Click to expand...
Click to collapse
The Pit file is flash together with the ROM not after ?
Do you have any error ehen flashing with odin ?
ciel phantomhive said:
The Pit file is flash together with the ROM not after ?
Do you have any error ehen flashing with odin ?
Click to expand...
Click to collapse
I have found the solution guyz
I just flash it with a full set 4files firmware (That contain CSC, PIT, PDA, BL) and it worked flawlessly
https://www.androidfilehost.com/?fid=24340319927533613
Thanks for your solution mate, hope it will help anyone who have same problem