Database Users

[Q] Soyan M9 Smartwatch

Bought Soyan M9 smartwatch a month back but still struggling to dowload/create new watch faces.
Google alot if any tool is available but didn't found.
I am also not sure what is operating system on it but suspecting tencent OS. However if any tool is not available and i suspect this is MTK processor based device so anyone can tell me if i can install Andorid on it.
Could not get even hardware Specs of the watch.

Some info about Soyan M9.
i hav asked same questions to supplier and have got below reply.
I had response you later,have not you got it?But no worry,i can send it again.Here is the reply for our supplier,
1.This is Taiwan MTK mediatek chips, cosmos Slim function machine and PDA system software package.
2.The APP name Mediatek smart devices.You can go to Google Play or Apple Store download it.
3.the chip: MT6260 ,frequency :350 M,it can support GPRS and MMS, WAP and so on.
4.There are three watch faces,you can provide 240 * 240 pixels image here if you want download more faces,our supplier can built into the software.
However i didn't get how to update or upgrade firmware.
MT6250 / MT6260 base smartwatches are from ZGPAX also. Can i install other MTK devices firmware.. I would appriciate if someone can explain if i can install android on it.
Thanks in advance.

Soyan M9 smartwatch firmware
Worst product service so far. I bought watch couple of months back but took long time to know about hardware.
This watch is dead totally and I kept asking for firmware so I can flash the watch to make it work again.
It's almost more than 20 times now that I asked for firmware but those Support people unable to understand my mail.
Unfortunately I have to take help from outside the soyan support. I request if anyone who bought this watch, can able to backup firmware and share me.
I would recommend to take backup of firmware anyway because after bricking of watch you won't able to get from soyan support.
If would appreciate if anyone can help and provide me firmware.

Firmware
Anyone in this forum who is using soyan m9 smartwatch. If yes then pls take backup of firmware using flash tool and help me providing the link.

you're the only one posting in this topic, i'm afraid you're on your own....
maybe we should put a sticky topic in this "Other smartwatches" section "DON'T FLASH YOU CHINESE WATCH"

Well, if you have soyan m9 watch then you can take backup of firmware using flash tool. Also can help me providing backed up firmware.

i have just got his watch. if you let me know how to take a backup i will try

jose17silva said:
i have just got his watch. if you let me know how to take a backup i will try
Click to expand...
Click to collapse
Thank you for your kind support. Backup can be done using Flash Tool. Below is one of the youtube video to perform the same. It is also good to have backup as we never know when it could be needed to restore.
https://www.youtube.com/watch?v=8130czJGqdA

jose17silva said:
i have just got his watch. if you let me know how to take a backup i will try
Click to expand...
Click to collapse
GV08S firmware is fully supported. I able to make my watch alive again... Thanks for your nice gesture
Much helpful link
http://niezarmsan.blogspot.in/2015/12/how-to-install-firmware-on-dz09-mtk6260.html

Alright I just got one of these watches, anyone make any roms I can flash onto this thing? I'd love to change the face and change the ringtones.

Can anyone help a frustrated desperate ripping the hair out her head female. before I start I am dumb blond when it comes to technology but I bought this watch tried 3 different sims in it and it keeps saying invalid imei. I spent hours online through you tube etc trying to find a way but nothing . please help

Need help identifying my phone and proper way to update it if possible.

Hi, I am new here. I hope I don't post something too obvious but I don't think it is since there are many specifics. I also hope this is in the right section of the forum, feel free to move it elsewhere if it is not. There is so much information going on that I'm a bit lost.
So I bought this samsung galaxy note 4 on kijiji a couple months ago. I noticed strange memory anomalies when I started to really understand the phone. I had to take it to a repair center because I thought I didn't have access to the full memory. The guy said this phone was either not from here (I'm from canada/quebec and I bought it in montreal) or it was a clone. It is so identical to a real one I would not have doubted it because it was the first time I had one in my hands. Yesterday I googled a bit on differences between real and fakes and I think it is a fake according to this youtube video from techmagnet: Fake vs Real Samsung Galaxy Note 4 - New Version - Best chinese 1:1 Replica for 150$ ? [HD]
Sorry I can't post the link since I'm new. Just copy paste the tilte.
It is pretty much identical to his fake so I guess it's the same. They have almost same informations. So first thing is it had only 16gb when I bought it instead of the 32 announced and is stuck on kitkat 4.4.4 while there is supposed to be a lollipop update I believe, maybe even marshmallow I'm not sure. So now that I know that, it doesn't bother me too much that it is fake because it runs very smoothly and properly. Now what I am wondering is how can I indentify what's really under this cover and can I update it. According to the video, the guy says there should be no problem. But I have never updated a galaxy note 4, my last one was a optimus black so nothing to compare. I have also never flashed or used custom rom or rooted a phone but I heard they can be faster, more stable (not that the one I have is not, it is perfectly stable) and with more options. I don't know if someone can confirm the real benefits of upgrading my phone.
Now if it is possible to do so I would gladly share the necessary information to help find the right firmware. So what information do I need, how do I find it and which rom should I run on this phone. There seems to be a lot of them and I don't know any of them actually. I have already the apps used in the video(cpuz, geekbench 3, and android assistant if this is what I need but they give different informations on some of the phone infos.. From what I learned from the repair store, the canadian firmware should be SM-N910c if I remember correctly but I'm not sure. But this phone says N910F which is why I thought it was simply a european model at first that was maybe stolen and sold back here because the IMEI was good. The guy at the repair store told me he was reluctant to change the firmware himself because he feared he might break the device with the wrong stock firmware, something I think should not happen with a custom one? Anyway he just reset my phone and I ended up losing memory because now it shows 4gb instead of 16 that should have been 32 in the first place, but I assume since it is a clone it must simply have 16.
Last thing I want to know is the guy who sold me the phone told me he had unlocked it for it to work on every network companies. I'm currently with koodo/telus. Can updating my firmware block it again, like erase the unblocking? Or is it safe? I assume it is possible that custom roms just unlock the phone anyway but I am a noob at this.
From what I can tell you at first those are the information I think might be usefull but I don't know if I need more. I'll just take the lead and share what I think might be useful:
Cpu z says I have qualcomm Snapdragon 800 3.00 ghz but Geekbench says I'm not actually going that fast.
It says 4 cores, should be 8 if it was a real note 4 I think
krait 400 architecture
revision r0p3
Gpu: Adreno (TM)330
(SM-N910F)
Board: APQ8084
Hardware: MT6582
Kernel Architecture: armv7l
Kernel version: 3.4.67 (N9100ZCU1ANIF)
System says 3000 of RAM but geekbench says I'm not actually reaching that.
And system, android assistant and Cpu z doesn't seem to agree on the amount of internal memory I have. Cpuz does say I should be having 16gb so I think a firmware update should give me back those extra gb right?
Sorry there are lots of questions but I need proper guidance to get me in the right direction. I hope this is enough information. Once I get to know which rom to use and the proper steps of installation I should be able to find my way.

matrix_drumr said:
Hi, I am new here. I hope I don't post something too obvious but I don't think it is since there are many specifics. I also hope this is in the right section of the forum, feel free to move it elsewhere if it is not. There is so much information going on that I'm a bit lost.
So I bought this samsung galaxy note 4 on kijiji a couple months ago. I noticed strange memory anomalies when I started to really understand the phone. I had to take it to a repair center because I thought I didn't have access to the full memory. The guy said this phone was either not from here (I'm from canada/quebec and I bought it in montreal) or it was a clone. It is so identical to a real one I would not have doubted it because it was the first time I had one in my hands. Yesterday I googled a bit on differences between real and fakes and I think it is a fake according to this youtube video from techmagnet: Fake vs Real Samsung Galaxy Note 4 - New Version - Best chinese 1:1 Replica for 150$ ? [HD]
Sorry I can't post the link since I'm new. Just copy paste the tilte.
It is pretty much identical to his fake so I guess it's the same. They have almost same informations. So first thing is it had only 16gb when I bought it instead of the 32 announced and is stuck on kitkat 4.4.4 while there is supposed to be a lollipop update I believe, maybe even marshmallow I'm not sure. So now that I know that, it doesn't bother me too much that it is fake because it runs very smoothly and properly. Now what I am wondering is how can I indentify what's really under this cover and can I update it. According to the video, the guy says there should be no problem. But I have never updated a galaxy note 4, my last one was a optimus black so nothing to compare. I have also never flashed or used custom rom or rooted a phone but I heard they can be faster, more stable (not that the one I have is not, it is perfectly stable) and with more options. I don't know if someone can confirm the real benefits of upgrading my phone.
Now if it is possible to do so I would gladly share the necessary information to help find the right firmware. So what information do I need, how do I find it and which rom should I run on this phone. There seems to be a lot of them and I don't know any of them actually. I have already the apps used in the video(cpuz, geekbench 3, and android assistant if this is what I need but they give different informations on some of the phone infos.. From what I learned from the repair store, the canadian firmware should be SM-N910c if I remember correctly but I'm not sure. But this phone says N910F which is why I thought it was simply a european model at first that was maybe stolen and sold back here because the IMEI was good. The guy at the repair store told me he was reluctant to change the firmware himself because he feared he might break the device with the wrong stock firmware, something I think should not happen with a custom one? Anyway he just reset my phone and I ended up losing memory because now it shows 4gb instead of 16 that should have been 32 in the first place, but I assume since it is a clone it must simply have 16.
Last thing I want to know is the guy who sold me the phone told me he had unlocked it for it to work on every network companies. I'm currently with koodo/telus. Can updating my firmware block it again, like erase the unblocking? Or is it safe? I assume it is possible that custom roms just unlock the phone anyway but I am a noob at this.
From what I can tell you at first those are the information I think might be usefull but I don't know if I need more. I'll just take the lead and share what I think might be useful:
Cpu z says I have qualcomm Snapdragon 800 3.00 ghz but Geekbench says I'm not actually going that fast.
It says 4 cores, should be 8 if it was a real note 4 I think
krait 400 architecture
revision r0p3
Gpu: Adreno (TM)330
(SM-N910F)
Board: APQ8084
Hardware: MT6582
Kernel Architecture: armv7l
Kernel version: 3.4.67 (N9100ZCU1ANIF)
System says 3000 of RAM but geekbench says I'm not actually reaching that.
And system, android assistant and Cpu z doesn't seem to agree on the amount of internal memory I have. Cpuz does say I should be having 16gb so I think a firmware update should give me back those extra gb right?
Sorry there are lots of questions but I need proper guidance to get me in the right direction. I hope this is enough information. Once I get to know which rom to use and the proper steps of installation I should be able to find my way.
Click to expand...
Click to collapse
I had S4 clone,and it just not good
Never buy clones,but never.You have 4GB memory,not 16GB.
For upgrading ROM,search on google MTK ROMS- you have MT6582,first u need proper recovery,than MTK tools(root and backup old system) and finily ROM(You need to copy aome files from ur currnet ROM in new one-files like drivers for wifi,camera,bt etc)
It complicated,YOU CAN BRICK DEVICE-and no,memory stay 4GB it real one
Ps Just check again if it for sure MT 6582(download app Genuine Galaxy - Phone Info)
And here is ROMS for you(each off this must be ported for your device-have instuction on site): http://www.mtkroms.com/p/custom-roms-for-mtk6582.html?m=1

Jovan1997 said:
I had S4 clone,and it just not good
Never buy clones,but never.You have 4GB memory,not 16GB.
For upgrading ROM,search on google MTK ROMS- you have MT6582,first u need proper recovery,than MTK tools(root and backup old system) and finily ROM(You need to copy aome files from ur currnet ROM in new one-files like drivers for wifi,camera,bt etc)
It complicated,YOU CAN BRICK DEVICE-and no,memory stay 4GB it real one
Ps Just check again if it for sure MT 6582(download app Genuine Galaxy - Phone Info)
And here is ROMS for you(each off this must be ported for your device-have instuction on site): xxxxxxxxxx
Click to expand...
Click to collapse
I think I have one of the best clones there is so it's not that bad. I have a 64gb SD card so I don't complain about internal memory.
So does upgrading rom erase the network unlocking?
And how do I choose between all those roms? There are so many! I guess a marshamallow one would be nice but is it stable and fast with this device?
Should I go with a rom that's like the one I already have? I don't know which one it is. Is there a way to find out?
Edit: Genuine galaxy says my IMEI is one of a Mobi SM55.
It says the cpu hardware is Qualcomm MSM 8974.
It also says I should have 16GB rom. I'm confused now
And CPU model says: ARMv7 Processor rev 3 (v7l)

Install the app like the above user mentioned, https://play.google.com/store/apps/details?id=org.vndnguyen.phoneinfo&hl=en

ithehappy said:
Install the app like the above user mentioned,
Click to expand...
Click to collapse
I did it's in my reply

matrix_drumr said:
I think I have one of the best clones there is so it's not that bad. I have a 64gb SD card so I don't complain about internal memory.
So does upgrading rom erase the network unlocking?
And how do I choose between all those roms? There are so many! I guess a marshamallow one would be nice but is it stable and fast with this device?
Should I go with a rom that's like the one I already have? I don't know which one it is. Is there a way to find out?
Edit: Genuine galaxy says my IMEI is one of a Mobi SM55.
It says the cpu hardware is Qualcomm MSM 8974.
It also says I should have 16GB rom. I'm confused now
And CPU model says: ARMv7 Processor rev 3 (v7l)
Click to expand...
Click to collapse
May be u have good clon,but nvm it just not easy FLASH and UPGRADE like original one..If u brick device and not have backup,you cant do nothing
Seems there no MM(marshamallow) for mt 6582(last is 5.1.1 i think,or 5.0.1).Clone is never locked network,so you dont need to worry about that.But it just not easy to find& flash recovery and ROM :/ It will work so much faster,but i dont recommend if u dont know what doing...You will probalby lost AirComand(but have solution for that)
And yea,CPU-Z need to show correct info about CPU and chip ,or just try to find some 3hrd app on play store to be sure it is MT 6582(hardwer info,CPU / RAM / DEVICE Identifier,samsung phone info etc)
If you decide to flash,just root and use MTK Tools for backup(it very important)

Jovan1997 said:
May be u have good clon,but nvm it just not easy FLASH and UPGRADE like original one..If u brick device and not have backup,you cant do nothing
Seems there no MM(marshamallow) for mt 6582(last is 5.1.1 i think,or 5.0.1).Clone is never locked network,so you dont need to worry about that.But it just not easy to find& flash recovery and ROM :/ It will work so much faster,but i dont recommend if u dont know what doing...You will probalby lost AirComand(but have solution for that)
And yea,CPU-Z need to show correct info about CPU and chip ,or just try to find some 3hrd app on play store to be sure it is MT 6582(hardwer info,CPU / RAM / DEVICE Identifier,samsung phone info etc)
If you decide to flash,just root and use MTK Tools for backup(it very important)
Click to expand...
Click to collapse
So CPU-Z says hardware is MT6582 and board is APQ 8084 but it also says Qualcomm Snapdragon 800 on the first Soc tab
Hardware info says the chipset is Qualcomm MSM 8974 and cpu hardware is APQ 8084
Genuine galaxy phone info says CPU hardware is Qualcomm MSM 8974 but no chipset information.
Which one is the right info haha!
I know what I'm doing as far as I won't do anything blindfolded. I don't know a lot about phones, I have more knowledge of computers but I figure there's a start for everything. Somehow this phone may be a blessing in that it'll make me learn about all this stuff. I'll just make sure to know which one is my actual hardware and which rom to take. I'm in no hurry, don't worry. I'll take the time to learn about every step. I know the risks.
I was also wondering which step can actually brick the phone? Is it the rooting access or the flashing of a new rom?
And should I bother with kernel versions?

matrix_drumr said:
So CPU-Z says hardware is MT6582 and board is APQ 8084 but it also says Qualcomm Snapdragon 800 on the first Soc tab
Hardware info says the chipset is Qualcomm MSM 8974 and cpu hardware is APQ 8084
Genuine galaxy phone info says CPU hardware is Qualcomm MSM 8974 but no chipset information.
Which one is the right info haha!
I know what I'm doing as far as I won't do anything blindfolded. I don't know a lot about phones, I have more knowledge of computers but I figure there's a start for everything. Somehow this phone may be a blessing in that it'll make me learn about all this stuff. I'll just make sure to know which one is my actual hardware and which rom to take. I'm in no hurry, don't worry. I'll take the time to learn about every step. I know the risks.
I was also wondering which step can actually brick the phone? Is it the rooting access or the flashing of a new rom?
And should I bother with kernel versions?
Click to expand...
Click to collapse
Hmmm :/ try to delete and download again CPU Z,but i think it MT6582(or download antutu bench just for info)
No,with rooting process all is safe(not 100% safe but ),but flesing recovery is complicated,must 'port' recovery by ur self..When u have fleshed good recovery,u have done 80%job
Whatever,I warn you but if u really want,you can send me PM with ur nimber phone and I will contact on viber or wp...I can help you trough TeamViewr
*bad eng sorry

New A2017G hardware?

My recently bought (Feb 2017) Axon 7 has a firmware that is unusual.
The phone name: ZTE A2017_7383
Model number: ZTE A2017G
Android Version: 6.01
Android Security patch level: December 1, 2016
Baseband version
M8996FAAAANAZM-1.68528.1.71127.1
Kernel version: 3.18.20
Build number: ZTE A2017GV2.0.0B08
Note that the build number is a V2.0.0B08
This phone is incompatible with the A2017GV1.0.0B05 and A2017GV1.0.0B10, so beware. I semi-bricked my phone (no network connectivity anymore) and I can't find a replacement A2017GV2.0 software.
I contacted ZTE, but no reply yet.
The reason I upgraded was due to inability to connect to 4G or LTE networks, even though my provider is on LTE band 3 and band 7.
Can anyone help me with this problem?

I looked at the back of the phone, where the original stickers still haven't been removed. It says ZTE A2017, without the "G". Could this be a Chinese set and the supplier reflashed it with a modified B08 firmware?
Anyone has a phone with the sticker not yet removed and has a different model number? I need proof that this is not the international version.
Would a Chinese version work on a "G" version software?

laicc said:
I looked at the back of the phone, where the original stickers still haven't been removed. It says ZTE A2017, without the "G". Could this be a Chinese set and the supplier reflashed it with a modified B08 firmware?
Anyone has a phone with the sticker not yet removed and has a different model number? I need proof that this is not the international version.
Would a Chinese version work on a "G" version software?
Click to expand...
Click to collapse
The A2017 is the chinese version...you can check this link to get the latest nougat update.....100% working
https://forum.xda-developers.com/axon-7/how-to/a2017-nougat-twrp-flashable-djkuz-t3571714

laicc said:
I looked at the back of the phone, where the original stickers still haven't been removed. It says ZTE A2017, without the "G". Could this be a Chinese set and the supplier reflashed it with a modified B08 firmware?
Anyone has a phone with the sticker not yet removed and has a different model number? I need proof that this is not the international version.
Would a Chinese version work on a "G" version software?
Click to expand...
Click to collapse
as far as I know A2017 variant doesn't have capacitive keys under the screen, so you would notice it right away. My sticker does spell "Model: A2017G" though. Have you made sure that the IMEI numbers written on the sticker match with your phone actual IMEI numbers too? (to be sure it's not a sticker issue)

laicc said:
I looked at the back of the phone, where the original stickers still haven't been removed. It says ZTE A2017, without the "G". Could this be a Chinese set and the supplier reflashed it with a modified B08 firmware?
Anyone has a phone with the sticker not yet removed and has a different model number? I need proof that this is not the international version.
Would a Chinese version work on a "G" version software?
Click to expand...
Click to collapse
USA (U) & International (G) = Hardware keys.
Chinese = No Hardware keys , and uses On-screen Navigation keys.
About the V2, that's something else.... Need further findings thought.

DrakenFX said:
USA (U) & International (G) = Hardware keys.
Chinese = No Hardware keys , and uses On-screen Navigation keys.
About the V2, that's something else.... Need further findings thought.
Click to expand...
Click to collapse
About the Chinese version, the 64GB model doesn't have hardware keys, that's right, but the 128GB version does. I have one.

Thanks everyone, just to close this issue, for the benefit of everyone, my discussions with the Ebay seller revealed that the handset is actually an A2017 Chinese set, and reflashed with their custom ROM to emulate an A2017G. Thats why it didn't work very well, and practically cannot be OTA'ed or updated.
This same message has been cross posted to [A2017G] B10 Update Released 1 2 3
Thread by rikin93
So sorry if I repeat myself here, but I just wanted everyone to know that the issue is closed.

I have the same issue, So how did you manage to solve it? did you flash the Chinese version? (A2017) if so how?
or did you ask the seller for the custom ROM to flash it back to that?
thank you

dude215p said:
I have the same issue, So how did you manage to solve it? did you flash the Chinese version? (A2017) if so how?
or did you ask the seller for the custom ROM to flash it back to that?
thank you
Click to expand...
Click to collapse
I had looked at the various options available here on this XDA site, like flashing back to the stock Chinese A2017 rom, or converting it to an A2017U, but in the end, I didn't think it was worth the trouble, and could even make the problem worse.
They did mention that their supplier has the custom rom, and he could probably get it for me. But that means I will be stuck with that rom forever with no possibility of an OTA.
I eventually convinced the Ebay seller to accept the return for a full refund.
Hope this helps.

laicc said:
I had looked at the various options available here on this XDA site, like flashing back to the stock Chinese A2017 rom, or converting it to an A2017U, but in the end, I didn't think it was worth the trouble, and could even make the problem worse.
They did mention that their supplier has the custom rom, and he could probably get it for me. But that means I will be stuck with that rom forever with no possibility of an OTA.
I eventually convinced the Ebay seller to accept the return for a full refund.
Hope this helps.
Click to expand...
Click to collapse
Hey, thank you for sharing,
I decided to do the opposite, and dived into getting my phone in working condition by flashing the chinese rom on it, although I never done anything like this before. I think I'll make a noob's guide to it, because while there are a lot of good tutorials out there, there are a lot of details kind of glossed over on how to do certain small steps, and you'll have to search for other guides on how that particular step is done.
For now let's just say that I'm happily running Nougat 7.1 with the Google Now launcher, and Google stock apps.

dude215p said:
Hey, thank you for sharing,
I decided to do the opposite, and dived into getting my phone in working condition by flashing the chinese rom on it, although I never done anything like this before. I think I'll make a noob's guide to it, because while there are a lot of good tutorials out there, there are a lot of details kind of glossed over on how to do certain small steps, and you'll have to search for other guides on how that particular step is done.
For now let's just say that I'm happily running Nougat 7.1 with the Google Now launcher, and Google stock apps.
Click to expand...
Click to collapse
That's great. I would really like to know how you did it. Reading the forum, even with the fairly detailed instructions that have been posted, can be intimidating for noob's like us. Is your 4G working good now? Thanks in advance.

[SM-J5108] Convert my J5 SM-J5108 to a more usable version ? (510F ?)

Hello,
My title may not be very cler but I can't find any custom ROMs for my device the J5 SM-J5108CHM (J5 China Mobile version) I can find official firmware but I just hate the interface, I found a really good-looking ROM (VIperOS) but it was for another variant of the phone.
So my question is : can I convert this phone to some other variant with same specs ? Thanks in advance

I've got the same question but no one seems to go to this thread if anyone has an answer to this that would be very appreciated. the j5108 seems to have all the same specs as the other variants so it should work but I'm not taking any risks because this is my everyday phone.
also the china mobile os is complete rubbish use this one (im a new user so i cant post link but just search up updato (dot) com, go to search bar and search j5108, in teh filters bar up top choose hong kong and press update under the search bar)
First, install any lollipop update (if you skip straight to marshmallow you'll end up in a bootloop), and then install either OTA update (it keeps failing for people but its good if you don't want to use Odin again) or you can download the marshmallow os after you install lollipop (make sure to NOT do a factory reset etc you'll end up in a boot loop). Install MM os and boom GAPPS and everything else you'll need.

jeff the cheff's left nut said:
I've got the same question but no one seems to go to this thread if anyone has an answer to this that would be very appreciated. the j5108 seems to have all the same specs as the other variants so it should work but I'm not taking any risks because this is my everyday phone.
also the china mobile os is complete rubbish use this one (im a new user so i cant post link but just search up updato (dot) com, go to search bar and search j5108, in teh filters bar up top choose hong kong and press update under the search bar)
First, install any lollipop update (if you skip straight to marshmallow you'll end up in a bootloop), and then install either OTA update (it keeps failing for people but its good if you don't want to use Odin again) or you can download the marshmallow os after you install lollipop (make sure to NOT do a factory reset etc you'll end up in a boot loop). Install MM os and boom GAPPS and everything else you'll need.
Click to expand...
Click to collapse
You can't. Its a different phone. Maybe you think because it says J5 chinese version that its the same thing, just different model number. There are reasons why ot has a different model number, baseband, etc... Its like you have the Samsung Galaxy S2 with exynos and the American one with SD. They are both S2, but totaly different phones.

does xda have a word cap or did my other post not post because it was long or is the image verification a post-verification. anyway, i was saying that all the j5 2016 variants are exactly the same which in theory would allow any model's OS to work on any variant. S2 isn't a great comparison because different models have different hardware while j5 2016 has different models with identical hardware. Just search up j5108 specs and j510x specs and they'll all be the same ill post back in a few weeks when I get a new battery and test out different OS (rn I'm using the stock hong kong OS). I'll try OS for different PDAs and then ill try out different models. Btw all the spec sites say the variants are compatible with Australia so I shouldn't have a problem using different models OS in Australia (meaning 4G, wifi, phone numbers etc should be fine).
Also please explain in more depth why j5 2016 variants are so different to the point that they have different model numbers (i know that sounds passive aggressive and pretend it isn't I honestly want to know). I'm super sorry if I sound like an arrogant **** that wants everything his way but the way the j5 2016 models are made they all seem identical and logically (and in theory) the other variants OS should work on the j5108. if for some reason I cant see my first reply but others can I'm so sorry for this post.

jeff the cheff's left nut said:
does xda have a word cap or did my other post not post because it was long or is the image verification a post-verification. anyway, i was saying that all the j5 2016 variants are exactly the same which in theory would allow any model's OS to work on any variant. S2 isn't a great comparison because different models have different hardware while j5 2016 has different models with identical hardware. Just search up j5108 specs and j510x specs and they'll all be the same ill post back in a few weeks when I get a new battery and test out different OS (rn I'm using the stock hong kong OS). I'll try OS for different PDAs and then ill try out different models. Btw all the spec sites say the variants are compatible with Australia so I shouldn't have a problem using different models OS in Australia (meaning 4G, wifi, phone numbers etc should be fine).
Also please explain in more depth why j5 2016 variants are so different to the point that they have different model numbers (i know that sounds passive aggressive and pretend it isn't I honestly want to know). I'm super sorry if I sound like an arrogant **** that wants everything his way but the way the j5 2016 models are made they all seem identical and logically (and in theory) the other variants OS should work on the j5108. if for some reason I cant see my first reply but others can I'm so sorry for this post.
Click to expand...
Click to collapse
Phones today can have the same harware, same SoC, same RAM, same everything, even the same RIL preferences, but they are different models. The whole stock software was made for a specific device model. The J510FN is different than the J510H, if there was no difference why would Samsung bother to make many versions? The whole operating system, every part of it: Kernel, Apps, Recovery, Hal, Bootloader are mannualy made for a specific model number. Because of that it is hard to make a ROM that supports all of the phones in one Samsung model family lineup. You see now that by pure logic the j508 is very different from the J510FN

YT9218 unit with 20200224 FW (1/16), radio issue

Dear all,
After trying many different firmwares, I've finally come across one that works for me (labeled as yt9216b 20200224). Rooted, installed RDS enabled fmradio.
This has worked before on a different FW, but for some reason there was no volume control whatsoever (full blast or mute). Now volume works, but I can't get the unit to use the radio chip anymore.
Also no RDS display in MTK engineering test mode.
How can I select the tuner? Factory settings always seems to revert to "fm inside".
I'm slightly frustrated now did somebody experience that one? Unit was branded as iMars 7 inch.
Greetings from NL
Nightliner