Hello everybody,
I just did a great mistakes, i tried to copy the secondary rom to primary slot with multirom TWRP V 3.0.0.0 , so it started to format the primary slot and it failed... and now i can't even boot my secondary rom because i don't have slot partition with kexec-hardboot patch anymore...
Also i can't install the drivers for windows 10 x64 to use the fastboot mode because i need to "Enable usb debugging on the device" to do it...
What's the best option to retrieve my secondary rom? Please help me :crying:
Thank you.
edit: should i do a hard reset?
For fastboot you do not need to enable usb debugging, only for connecting by adb.
Nevertheless to use fastboot, you need to have your device unlocked and to put it into fastboot mode. From there you can start / flash the OP you would like to.
If your device is not unlocked, you will be asked for a device reset which wll erase all the data on your device.
Btw.: using OSx / Linux is much more easy when it comes to flashing / debugging Android.
AndDiSa said:
For fastboot you do not need to enable usb debugging, only for connecting by adb.
Nevertheless to use fastboot, you need to have your device unlocked and to put it into fastboot mode. From there you can start / flash the OP you would like to.
If your device is not unlocked, you will be asked for a device reset which wll erase all the data on your device.
Btw.: using OSx / Linux is much more easy when it comes to flashing / debugging Android.
Click to expand...
Click to collapse
Thanks a million for your reply AndDiSa ! To be honest i was completely desperate...
The bootloader is unlocked, here is a photo:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I tried these commands in the terminal on my ubuntu laptop:
Code:
sudo add-apt-repository ppa:phablet-team/tools
sudo apt-get update
sudo apt-get install android-tools-adb android-tools-fastboot
I connected my nexus in fastboot mode via USB port and i did :
Code:
sudo fastboot devices
But no devices appears. i did something wrong?
Thank you.
You need to adapt your udev-rules, i.e create a file named "51-android.rules" in /etc/udev/rules.d and put the following content into it, but replace the owner name by your login name:
Code:
# adb protocol on passion (Nexus One)
SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", ATTR{idProduct}=="4e12", MODE="0600", OWNER="ds"
# fastboot protocol on passion (Nexus One)
SUBSYSTEM=="usb", ATTR{idVendor}=="0bb4", ATTR{idProduct}=="0fff", MODE="0600", OWNER="ds"
# adb protocol on crespo/crespo4g (Nexus S)
SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", ATTR{idProduct}=="4e22", MODE="0600", OWNER="ds"
# fastboot protocol on crespo/crespo4g (Nexus S)
SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", ATTR{idProduct}=="4e20", MODE="0600", OWNER="ds"
# adb protocol on stingray/wingray (Xoom)
SUBSYSTEM=="usb", ATTR{idVendor}=="22b8", ATTR{idProduct}=="70a9", MODE="0600", OWNER="ds"
# fastboot protocol on stingray/wingray (Xoom)
SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", ATTR{idProduct}=="708c", MODE="0600", OWNER="ds"
# adb protocol on maguro/toro (Galaxy Nexus)
SUBSYSTEM=="usb", ATTR{idVendor}=="04e8", ATTR{idProduct}=="6860", MODE="0600", OWNER="ds"
# fastboot protocol on maguro/toro (Galaxy Nexus)
SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", ATTR{idProduct}=="4e30", MODE="0600", OWNER="ds"
# adb protocol on panda (PandaBoard)
SUBSYSTEM=="usb", ATTR{idVendor}=="0451", ATTR{idProduct}=="d101", MODE="0600", OWNER="ds"
# adb protocol on panda (PandaBoard ES)
SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", ATTR{idProduct}=="d002", MODE="0600", OWNER="ds"
# fastboot protocol on panda (PandaBoard)
SUBSYSTEM=="usb", ATTR{idVendor}=="0451", ATTR{idProduct}=="d022", MODE="0600", OWNER="ds"
# usbboot protocol on panda (PandaBoard)
SUBSYSTEM=="usb", ATTR{idVendor}=="0451", ATTR{idProduct}=="d00f", MODE="0600", OWNER="ds"
# usbboot protocol on panda (PandaBoard ES)
SUBSYSTEM=="usb", ATTR{idVendor}=="0451", ATTR{idProduct}=="d010", MODE="0600", OWNER="ds"
# adb protocol on grouper/tilapia (Nexus 7)
SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", ATTR{idProduct}=="4e42", MODE="0600", OWNER="ds"
# fastboot protocol on grouper/tilapia (Nexus 7)
SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", ATTR{idProduct}=="4e40", MODE="0600", OWNER="ds"
# adb protocol on manta (Nexus 10)
SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", ATTR{idProduct}=="4ee2", MODE="0600", OWNER="ds"
# fastboot protocol on manta (Nexus 10)
SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", ATTR{idProduct}=="4ee0", MODE="0600", OWNER="ds"
##########################################################################################
# my own devices
##########################################################################################
# Google Nexus 7 16 Gb Bootloader & recovery mode
SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", ATTR{idProduct}=="4e40", MODE="0666", OWNER="ds" # Bootloader
SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", ATTR{idProduct}=="d001", MODE="0666", OWNER="ds" # Recovery
# Google Nexus 7 16 Gb PTP mode (camera)
SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", ATTR{idProduct}=="4e43", MODE="0666", OWNER="ds" # PTP media
SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", ATTR{idProduct}=="4e44", MODE="0666", OWNER="ds" # PTP media with USB debug on
# Google Nexus 7 16 Gb MTP mode (multimedia device)
SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", ATTR{idProduct}=="4e41", MODE="0666", OWNER="ds" # MTP media
SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", ATTR{idProduct}=="4e42", MODE="0666", OWNER="ds" # MTP media with USB debug on
# Google Nexus 7 MTP mode : automatic unmount when unplugged
ENV{ID_MODEL}=="Nexus", ENV{ID_MODEL_ID}=="4e41", ACTION=="remove", RUN+="/usr/bin/fusermount -u /media/nexus7"
ENV{ID_MODEL}=="Nexus", ENV{ID_MODEL_ID}=="4e42", ACTION=="remove", RUN+="/usr/bin/fusermount -u /media/nexus7"
AndDiSa said:
You need to adapt your udev-rules, i.e create a file named "51-android.rules" in /etc/udev/rules.d and put the following content into it, but replace the owner name by your login name:
Click to expand...
Click to collapse
Thanks again for your help.
So i typed this in the terminal:
Code:
sudo gedit /etc/udev/rules.d/51-android.rules
then i copied/pasted this:
Code:
# adb protocol on passion (Nexus One)
SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", ATTR{idProduct}=="4e12", MODE="0600", OWNER="mikael"
# fastboot protocol on passion (Nexus One)
SUBSYSTEM=="usb", ATTR{idVendor}=="0bb4", ATTR{idProduct}=="0fff", MODE="0600", OWNER="mikael"
# adb protocol on crespo/crespo4g (Nexus S)
SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", ATTR{idProduct}=="4e22", MODE="0600", OWNER="mikael"
# fastboot protocol on crespo/crespo4g (Nexus S)
SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", ATTR{idProduct}=="4e20", MODE="0600", OWNER="mikael"
# adb protocol on stingray/wingray (Xoom)
SUBSYSTEM=="usb", ATTR{idVendor}=="22b8", ATTR{idProduct}=="70a9", MODE="0600", OWNER="mikael"
# fastboot protocol on stingray/wingray (Xoom)
SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", ATTR{idProduct}=="708c", MODE="0600", OWNER="mikael"
# adb protocol on maguro/toro (Galaxy Nexus)
SUBSYSTEM=="usb", ATTR{idVendor}=="04e8", ATTR{idProduct}=="6860", MODE="0600", OWNER="mikael"
# fastboot protocol on maguro/toro (Galaxy Nexus)
SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", ATTR{idProduct}=="4e30", MODE="0600", OWNER="mikael"
# adb protocol on panda (PandaBoard)
SUBSYSTEM=="usb", ATTR{idVendor}=="0451", ATTR{idProduct}=="d101", MODE="0600", OWNER="mikael"
# adb protocol on panda (PandaBoard ES)
SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", ATTR{idProduct}=="d002", MODE="0600", OWNER="mikael"
# fastboot protocol on panda (PandaBoard)
SUBSYSTEM=="usb", ATTR{idVendor}=="0451", ATTR{idProduct}=="d022", MODE="0600", OWNER="mikael"
# usbboot protocol on panda (PandaBoard)
SUBSYSTEM=="usb", ATTR{idVendor}=="0451", ATTR{idProduct}=="d00f", MODE="0600", OWNER="mikael"
# usbboot protocol on panda (PandaBoard ES)
SUBSYSTEM=="usb", ATTR{idVendor}=="0451", ATTR{idProduct}=="d010", MODE="0600", OWNER="mikael"
# adb protocol on grouper/tilapia (Nexus 7)
SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", ATTR{idProduct}=="4e42", MODE="0600", OWNER="mikael"
# fastboot protocol on grouper/tilapia (Nexus 7)
SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", ATTR{idProduct}=="4e40", MODE="0600", OWNER="mikael"
# adb protocol on manta (Nexus 10)
SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", ATTR{idProduct}=="4ee2", MODE="0600", OWNER="mikael"
# fastboot protocol on manta (Nexus 10)
SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", ATTR{idProduct}=="4ee0", MODE="0600", OWNER="mikael"
##########################################################################################
# my own devices
##########################################################################################
# Google Nexus 7 16 Gb Bootloader & recovery mode
SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", ATTR{idProduct}=="4e40", MODE="0666", OWNER="mikael" # Bootloader
SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", ATTR{idProduct}=="d001", MODE="0666", OWNER="mikael" # Recovery
# Google Nexus 7 16 Gb PTP mode (camera)
SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", ATTR{idProduct}=="4e43", MODE="0666", OWNER="mikael" # PTP media
SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", ATTR{idProduct}=="4e44", MODE="0666", OWNER="mikael" # PTP media with USB debug on
# Google Nexus 7 16 Gb MTP mode (multimedia device)
SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", ATTR{idProduct}=="4e41", MODE="0666", OWNER="mikael" # MTP media
SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", ATTR{idProduct}=="4e42", MODE="0666", OWNER="mikael" # MTP media with USB debug on
# Google Nexus 7 MTP mode : automatic unmount when unplugged
ENV{ID_MODEL}=="Nexus", ENV{ID_MODEL_ID}=="4e41", ACTION=="remove", RUN+="/usr/bin/fusermount -u /media/nexus7"
ENV{ID_MODEL}=="Nexus", ENV{ID_MODEL_ID}=="4e42", ACTION=="remove", RUN+="/usr/bin/fusermount -u /media/nexus7"
Is it ok?
I saved in gedit and quit, then i connected the Nexus 7 via USB and i tried this :
Code:
lsusb
Sadly the nexus 7 doesn't appear. :/
I'm on ubuntu 14.04 LTS.
First you have to restart the udev subsystem.
# sudo udevadm control --reload-rules
should do the trick
Sent from my Nexus 7 using XDA-Developers mobile app
AndDiSa said:
First you have to restart the udev subsystem.
# sudo udevadm control --reload-rules
should do the trick
Sent from my Nexus 7 using XDA-Developers mobile app
Click to expand...
Click to collapse
Thank you but
Code:
sudo udevadm control --reload-rules
and still doesn't work , i also reboot the laptop but the Nexus still not appears with
Code:
lsusb
Do you see that a device is connected?
You can have a look with dmesg, probably this will give you a hint what might be wrong ...
Sent from my Nexus 7 using XDA-Developers mobile app
AndDiSa said:
Do you see that a device is connected?
You can have a look with dmesg, probably this will give you a hint what might be wrong ...
Sent from my Nexus 7 using XDA-Developers mobile app
Click to expand...
Click to collapse
I see no device connected at the right (launch bar). The Nexus 7 must be on the bootloader, right?
I did a:
Code:
dmesg
but the list is too long so i did this:
Code:
dmesg | grep -i usb
and here is the result:
Code:
[ 0.216934] ACPI: bus type USB registered
[ 0.216966] usbcore: registered new interface driver usbfs
[ 0.216981] usbcore: registered new interface driver hub
[ 0.217015] usbcore: registered new device driver usb
[ 1.055826] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.056014] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.071266] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.071331] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.071334] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.071336] usb usb1: Product: EHCI Host Controller
[ 1.071339] usb usb1: Manufacturer: Linux 3.16.0-77-generic ehci_hcd
[ 1.071341] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.071509] hub 1-0:1.0: USB hub found
[ 1.071835] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.087258] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.087314] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.087316] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.087319] usb usb2: Product: EHCI Host Controller
[ 1.087321] usb usb2: Manufacturer: Linux 3.16.0-77-generic ehci_hcd
[ 1.087324] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.087498] hub 2-0:1.0: USB hub found
[ 1.087705] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.087741] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.383076] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.516033] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.516036] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.516334] hub 1-1:1.0: USB hub found
[ 1.626892] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.759266] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.759277] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.759696] hub 2-1:1.0: USB hub found
[ 127.148971] usb 2-1.2: new full-speed USB device number 3 using ehci-pci
[ 127.220913] usb 2-1.2: device descriptor read/64, error -32
[ 127.396785] usb 2-1.2: device descriptor read/64, error -32
[ 127.572661] usb 2-1.2: new full-speed USB device number 4 using ehci-pci
[ 127.644611] usb 2-1.2: device descriptor read/64, error -32
[ 127.820489] usb 2-1.2: device descriptor read/64, error -32
[ 127.996359] usb 2-1.2: new full-speed USB device number 5 using ehci-pci
[ 128.404080] usb 2-1.2: device not accepting address 5, error -32
[ 128.476022] usb 2-1.2: new full-speed USB device number 6 using ehci-pci
[ 128.883740] usb 2-1.2: device not accepting address 6, error -32
[ 128.883854] usb 2-1-port2: unable to enumerate USB device
[ 1164.689944] usb 2-1.2: new full-speed USB device number 7 using ehci-pci
[ 1164.761892] usb 2-1.2: device descriptor read/64, error -32
[ 1164.937766] usb 2-1.2: device descriptor read/64, error -32
[ 1165.113648] usb 2-1.2: new full-speed USB device number 8 using ehci-pci
[ 1165.185595] usb 2-1.2: device descriptor read/64, error -32
[ 1165.361463] usb 2-1.2: device descriptor read/64, error -32
[ 1165.537339] usb 2-1.2: new full-speed USB device number 9 using ehci-pci
[ 1165.945049] usb 2-1.2: device not accepting address 9, error -32
[ 1166.017002] usb 2-1.2: new full-speed USB device number 10 using ehci-pci
[ 1166.424715] usb 2-1.2: device not accepting address 10, error -32
[ 1166.424838] usb 2-1-port2: unable to enumerate USB device
[ 1167.671834] usb 2-1.2: new full-speed USB device number 11 using ehci-pci
[ 1167.743778] usb 2-1.2: device descriptor read/64, error -32
[ 1167.919650] usb 2-1.2: device descriptor read/64, error -32
[ 1168.095525] usb 2-1.2: new full-speed USB device number 12 using ehci-pci
[ 1168.167482] usb 2-1.2: device descriptor read/64, error -32
[ 1168.343367] usb 2-1.2: device descriptor read/64, error -32
[ 1168.519237] usb 2-1.2: new full-speed USB device number 13 using ehci-pci
[ 1168.926938] usb 2-1.2: device not accepting address 13, error -32
[ 1168.998888] usb 2-1.2: new full-speed USB device number 14 using ehci-pci
[ 1169.406607] usb 2-1.2: device not accepting address 14, error -32
[ 1169.406837] usb 2-1-port2: unable to enumerate USB device
[ 1170.653717] usb 2-1.2: new full-speed USB device number 15 using ehci-pci
[ 1170.725665] usb 2-1.2: device descriptor read/64, error -32
[ 1170.901540] usb 2-1.2: device descriptor read/64, error -32
[ 1171.077414] usb 2-1.2: new full-speed USB device number 16 using ehci-pci
[ 1171.149379] usb 2-1.2: device descriptor read/64, error -32
[ 1171.325251] usb 2-1.2: device descriptor read/64, error -32
[ 1171.501120] usb 2-1.2: new full-speed USB device number 17 using ehci-pci
[ 1171.908831] usb 2-1.2: device not accepting address 17, error -32
[ 1171.980775] usb 2-1.2: new full-speed USB device number 18 using ehci-pci
[ 1172.388492] usb 2-1.2: device not accepting address 18, error -32
[ 1172.388674] usb 2-1-port2: unable to enumerate USB device
[ 1173.611623] usb 2-1.2: new full-speed USB device number 19 using ehci-pci
[ 1173.683570] usb 2-1.2: device descriptor read/64, error -32
[ 1173.859443] usb 2-1.2: device descriptor read/64, error -32
[ 1174.035317] usb 2-1.2: new full-speed USB device number 20 using ehci-pci
[ 1174.107268] usb 2-1.2: device descriptor read/64, error -32
[ 1174.283147] usb 2-1.2: device descriptor read/64, error -32
[ 1174.459019] usb 2-1.2: new full-speed USB device number 21 using ehci-pci
[ 1174.866726] usb 2-1.2: device not accepting address 21, error -32
[ 1174.938670] usb 2-1.2: new full-speed USB device number 22 using ehci-pci
[ 1175.346402] usb 2-1.2: device not accepting address 22, error -32
[ 1175.346491] usb 2-1-port2: unable to enumerate USB device
[ 1176.553538] usb 2-1.2: new full-speed USB device number 23 using ehci-pci
[ 1176.625484] usb 2-1.2: device descriptor read/64, error -32
[ 1176.801357] usb 2-1.2: device descriptor read/64, error -32
[ 1176.977233] usb 2-1.2: new full-speed USB device number 24 using ehci-pci
[ 1177.049183] usb 2-1.2: device descriptor read/64, error -32
[ 1177.225067] usb 2-1.2: device descriptor read/64, error -32
[ 1177.400937] usb 2-1.2: new full-speed USB device number 25 using ehci-pci
[ 1177.808651] usb 2-1.2: device not accepting address 25, error -32
[ 1177.880600] usb 2-1.2: new full-speed USB device number 26 using ehci-pci
[ 1178.288288] usb 2-1.2: device not accepting address 26, error -32
[ 1178.288430] usb 2-1-port2: unable to enumerate USB device
[ 1179.495452] usb 2-1.2: new full-speed USB device number 27 using ehci-pci
[ 1179.567400] usb 2-1.2: device descriptor read/64, error -32
[ 1179.743262] usb 2-1.2: device descriptor read/64, error -32
[ 1179.919156] usb 2-1.2: new full-speed USB device number 28 using ehci-pci
[ 1179.991091] usb 2-1.2: device descriptor read/64, error -32
[ 1180.166974] usb 2-1.2: device descriptor read/64, error -32
[ 1180.342855] usb 2-1.2: new full-speed USB device number 29 using ehci-pci
[ 1180.750564] usb 2-1.2: device not accepting address 29, error -32
[ 1180.822521] usb 2-1.2: new full-speed USB device number 30 using ehci-pci
[ 1181.230232] usb 2-1.2: device not accepting address 30, error -32
[ 1181.230430] usb 2-1-port2: unable to enumerate USB device
[ 1181.378102] usb 2-1.2: new full-speed USB device number 31 using ehci-pci
[ 1181.450066] usb 2-1.2: device descriptor read/64, error -32
[ 1181.625947] usb 2-1.2: device descriptor read/64, error -32
[ 1181.801819] usb 2-1.2: new full-speed USB device number 32 using ehci-pci
[ 1181.873778] usb 2-1.2: device descriptor read/64, error -32
[ 1182.049641] usb 2-1.2: device descriptor read/64, error -32
[ 1182.225542] usb 2-1.2: new full-speed USB device number 33 using ehci-pci
[ 1182.633227] usb 2-1.2: device not accepting address 33, error -32
[ 1182.705178] usb 2-1.2: new full-speed USB device number 34 using ehci-pci
[ 1183.112887] usb 2-1.2: device not accepting address 34, error -32
[ 1183.113077] usb 2-1-port2: unable to enumerate USB device
[ 1184.320033] usb 2-1.2: new full-speed USB device number 35 using ehci-pci
[ 1184.391982] usb 2-1.2: device descriptor read/64, error -32
[ 1184.567861] usb 2-1.2: device descriptor read/64, error -32
[ 1184.743733] usb 2-1.2: new full-speed USB device number 36 using ehci-pci
[ 1184.815694] usb 2-1.2: device descriptor read/64, error -32
[ 1184.991554] usb 2-1.2: device descriptor read/64, error -32
[ 1185.167431] usb 2-1.2: new full-speed USB device number 37 using ehci-pci
[ 1185.575142] usb 2-1.2: device not accepting address 37, error -32
[ 1185.647093] usb 2-1.2: new full-speed USB device number 38 using ehci-pci
[ 1186.054800] usb 2-1.2: device not accepting address 38, error -32
[ 1186.054906] usb 2-1-port2: unable to enumerate USB device
[ 1186.202710] usb 2-1.2: new full-speed USB device number 39 using ehci-pci
[ 1186.274647] usb 2-1.2: device descriptor read/64, error -32
[ 1186.450521] usb 2-1.2: device descriptor read/64, error -32
[ 1186.626399] usb 2-1.2: new full-speed USB device number 40 using ehci-pci
[ 1186.698347] usb 2-1.2: device descriptor read/64, error -32
[ 1186.874218] usb 2-1.2: device descriptor read/64, error -32
[ 1187.050099] usb 2-1.2: new full-speed USB device number 41 using ehci-pci
[ 1187.457807] usb 2-1.2: device not accepting address 41, error -32
[ 1187.529760] usb 2-1.2: new full-speed USB device number 42 using ehci-pci
[ 1187.937468] usb 2-1.2: device not accepting address 42, error -32
[ 1187.937568] usb 2-1-port2: unable to enumerate USB device
[ 1188.097370] usb 2-1.2: new full-speed USB device number 43 using ehci-pci
[ 1188.169306] usb 2-1.2: device descriptor read/64, error -32
[ 1188.345215] usb 2-1.2: device descriptor read/64, error -32
[ 1188.521064] usb 2-1.2: new full-speed USB device number 44 using ehci-pci
[ 1188.593010] usb 2-1.2: device descriptor read/64, error -32
[ 1188.768882] usb 2-1.2: device descriptor read/64, error -32
[ 1188.944755] usb 2-1.2: new full-speed USB device number 45 using ehci-pci
[ 1189.352467] usb 2-1.2: device not accepting address 45, error -32
[ 1189.424431] usb 2-1.2: new full-speed USB device number 46 using ehci-pci
[ 1189.832127] usb 2-1.2: device not accepting address 46, error -32
[ 1189.832329] usb 2-1-port2: unable to enumerate USB device
[ 1191.039274] usb 2-1.2: new full-speed USB device number 47 using ehci-pci
[ 1191.111227] usb 2-1.2: device descriptor read/64, error -32
[ 1191.287097] usb 2-1.2: device descriptor read/64, error -32
[ 1191.462969] usb 2-1.2: new full-speed USB device number 48 using ehci-pci
[ 1191.534920] usb 2-1.2: device descriptor read/64, error -32
[ 1191.710795] usb 2-1.2: device descriptor read/64, error -32
[ 1191.886671] usb 2-1.2: new full-speed USB device number 49 using ehci-pci
[ 1192.294399] usb 2-1.2: device not accepting address 49, error -32
[ 1192.366333] usb 2-1.2: new full-speed USB device number 50 using ehci-pci
[ 1192.774038] usb 2-1.2: device not accepting address 50, error -32
[ 1192.774174] usb 2-1-port2: unable to enumerate USB device
[ 1192.921943] usb 2-1.2: new full-speed USB device number 51 using ehci-pci
[ 1192.993888] usb 2-1.2: device descriptor read/64, error -32
[ 1193.169758] usb 2-1.2: device descriptor read/64, error -32
[ 1193.345637] usb 2-1.2: new full-speed USB device number 52 using ehci-pci
[ 1193.417586] usb 2-1.2: device descriptor read/64, error -32
[ 1193.593462] usb 2-1.2: device descriptor read/64, error -32
[ 1193.769337] usb 2-1.2: new full-speed USB device number 53 using ehci-pci
[ 1194.177063] usb 2-1.2: device not accepting address 53, error -32
[ 1194.248996] usb 2-1.2: new full-speed USB device number 54 using ehci-pci
[ 1194.656706] usb 2-1.2: device not accepting address 54, error -32
[ 1194.656827] usb 2-1-port2: unable to enumerate USB device
[ 1195.863855] usb 2-1.2: new full-speed USB device number 55 using ehci-pci
[ 1195.935803] usb 2-1.2: device descriptor read/64, error -32
[ 1196.111679] usb 2-1.2: device descriptor read/64, error -32
[ 1196.287555] usb 2-1.2: new full-speed USB device number 56 using ehci-pci
[ 1196.359502] usb 2-1.2: device descriptor read/64, error -32
[ 1196.535377] usb 2-1.2: device descriptor read/64, error -32
[ 1196.711261] usb 2-1.2: new full-speed USB device number 57 using ehci-pci
[ 1197.118963] usb 2-1.2: device not accepting address 57, error -32
[ 1197.190950] usb 2-1.2: new full-speed USB device number 58 using ehci-pci
[ 1197.598624] usb 2-1.2: device not accepting address 58, error -32
[ 1197.598743] usb 2-1-port2: unable to enumerate USB device
[ 1198.817761] usb 2-1.2: new full-speed USB device number 59 using ehci-pci
[ 1198.889710] usb 2-1.2: device descriptor read/64, error -32
[ 1199.065585] usb 2-1.2: device descriptor read/64, error -32
[ 1199.241460] usb 2-1.2: new full-speed USB device number 60 using ehci-pci
[ 1199.313407] usb 2-1.2: device descriptor read/64, error -32
[ 1199.489284] usb 2-1.2: device descriptor read/64, error -32
[ 1199.665161] usb 2-1.2: new full-speed USB device number 61 using ehci-pci
[ 1200.072869] usb 2-1.2: device not accepting address 61, error -32
[ 1200.144822] usb 2-1.2: new full-speed USB device number 62 using ehci-pci
[ 1200.552532] usb 2-1.2: device not accepting address 62, error -32
[ 1200.552618] usb 2-1-port2: unable to enumerate USB device
[ 1201.771665] usb 2-1.2: new full-speed USB device number 63 using ehci-pci
[ 1201.843617] usb 2-1.2: device descriptor read/64, error -32
[ 1202.019493] usb 2-1.2: device descriptor read/64, error -32
[ 1202.195369] usb 2-1.2: new full-speed USB device number 64 using ehci-pci
[ 1202.267315] usb 2-1.2: device descriptor read/64, error -32
[ 1202.443200] usb 2-1.2: device descriptor read/64, error -32
[ 1202.619070] usb 2-1.2: new full-speed USB device number 65 using ehci-pci
[ 1203.026778] usb 2-1.2: device not accepting address 65, error -32
[ 1203.098728] usb 2-1.2: new full-speed USB device number 66 using ehci-pci
[ 1203.506438] usb 2-1.2: device not accepting address 66, error -32
[ 1203.506623] usb 2-1-port2: unable to enumerate USB device
[ 1204.725574] usb 2-1.2: new full-speed USB device number 67 using ehci-pci
[ 1204.797527] usb 2-1.2: device descriptor read/64, error -32
[ 1204.973400] usb 2-1.2: device descriptor read/64, error -32
[ 1205.149271] usb 2-1.2: new full-speed USB device number 68 using ehci-pci
[ 1205.221259] usb 2-1.2: device descriptor read/64, error -32
[ 1205.397108] usb 2-1.2: device descriptor read/64, error -32
[ 1205.572977] usb 2-1.2: new full-speed USB device number 69 using ehci-pci
[ 1205.980685] usb 2-1.2: device not accepting address 69, error -32
[ 1206.052638] usb 2-1.2: new full-speed USB device number 70 using ehci-pci
[ 1206.460358] usb 2-1.2: device not accepting address 70, error -32
[ 1206.460571] usb 2-1-port2: unable to enumerate USB device
[ 1207.667494] usb 2-1.2: new full-speed USB device number 71 using ehci-pci
[ 1207.739443] usb 2-1.2: device descriptor read/64, error -32
[ 1207.915313] usb 2-1.2: device descriptor read/64, error -32
[ 1208.091193] usb 2-1.2: new full-speed USB device number 72 using ehci-pci
[ 1208.163142] usb 2-1.2: device descriptor read/64, error -32
[ 1208.339015] usb 2-1.2: device descriptor read/64, error -32
[ 1208.514893] usb 2-1.2: new full-speed USB device number 73 using ehci-pci
[ 1208.922604] usb 2-1.2: device not accepting address 73, error -32
[ 1208.994556] usb 2-1.2: new full-speed USB device number 74 using ehci-pci
[ 1209.402261] usb 2-1.2: device not accepting address 74, error -32
[ 1209.402380] usb 2-1-port2: unable to enumerate USB device
[ 1209.550156] usb 2-1.2: new full-speed USB device number 75 using ehci-pci
[ 1209.622107] usb 2-1.2: device descriptor read/64, error -32
[ 1209.797982] usb 2-1.2: device descriptor read/64, error -32
[ 1209.973858] usb 2-1.2: new full-speed USB device number 76 using ehci-pci
[ 1210.045806] usb 2-1.2: device descriptor read/64, error -32
[ 1210.221692] usb 2-1.2: device descriptor read/64, error -32
[ 1210.397563] usb 2-1.2: new full-speed USB device number 77 using ehci-pci
[ 1210.805301] usb 2-1.2: device not accepting address 77, error -32
[ 1210.877229] usb 2-1.2: new full-speed USB device number 78 using ehci-pci
[ 1211.284944] usb 2-1.2: device not accepting address 78, error -32
[ 1211.285030] usb 2-1-port2: unable to enumerate USB device
[ 1212.492078] usb 2-1.2: new full-speed USB device number 79 using ehci-pci
[ 1212.564026] usb 2-1.2: device descriptor read/64, error -32
[ 1212.739898] usb 2-1.2: device descriptor read/64, error -32
[ 1212.915782] usb 2-1.2: new full-speed USB device number 80 using ehci-pci
[ 1212.987734] usb 2-1.2: device descriptor read/64, error -32
[ 1213.163626] usb 2-1.2: device descriptor read/64, error -32
[ 1213.339475] usb 2-1.2: new full-speed USB device number 81 using ehci-pci
[ 1213.747185] usb 2-1.2: device not accepting address 81, error -32
[ 1213.819135] usb 2-1.2: new full-speed USB device number 82 using ehci-pci
[ 1214.226858] usb 2-1.2: device not accepting address 82, error -32
[ 1214.226995] usb 2-1-port2: unable to enumerate USB device
[ 1214.374738] usb 2-1.2: new full-speed USB device number 83 using ehci-pci
[ 1214.446687] usb 2-1.2: device descriptor read/64, error -32
[ 1214.622559] usb 2-1.2: device descriptor read/64, error -32
[ 1214.798461] usb 2-1.2: new full-speed USB device number 84 using ehci-pci
[ 1214.870386] usb 2-1.2: device descriptor read/64, error -32
[ 1215.046264] usb 2-1.2: device descriptor read/64, error -32
[ 1215.222157] usb 2-1.2: new full-speed USB device number 85 using ehci-pci
[ 1215.629852] usb 2-1.2: device not accepting address 85, error -32
[ 1215.701801] usb 2-1.2: new full-speed USB device number 86 using ehci-pci
[ 1216.109511] usb 2-1.2: device not accepting address 86, error -32
[ 1216.109645] usb 2-1-port2: unable to enumerate USB device
[ 1217.316655] usb 2-1.2: new full-speed USB device number 87 using ehci-pci
[ 1217.388617] usb 2-1.2: device descriptor read/64, error -32
[ 1217.564480] usb 2-1.2: device descriptor read/64, error -32
[ 1217.740356] usb 2-1.2: new full-speed USB device number 88 using ehci-pci
[ 1217.812304] usb 2-1.2: device descriptor read/64, error -32
[ 1217.988179] usb 2-1.2: device descriptor read/64, error -32
[ 1218.164092] usb 2-1.2: new full-speed USB device number 89 using ehci-pci
[ 1218.571766] usb 2-1.2: device not accepting address 89, error -32
[ 1218.643718] usb 2-1.2: new full-speed USB device number 90 using ehci-pci
[ 1219.051426] usb 2-1.2: device not accepting address 90, error -32
[ 1219.051544] usb 2-1-port2: unable to enumerate USB device
[ 1220.258568] usb 2-1.2: new full-speed USB device number 91 using ehci-pci
[ 1220.330520] usb 2-1.2: device descriptor read/64, error -32
[ 1220.506395] usb 2-1.2: device descriptor read/64, error -32
[ 1220.682272] usb 2-1.2: new full-speed USB device number 92 using ehci-pci
[ 1220.754221] usb 2-1.2: device descriptor read/64, error -32
[ 1220.930095] usb 2-1.2: device descriptor read/64, error -32
[ 1221.105972] usb 2-1.2: new full-speed USB device number 93 using ehci-pci
[ 1221.513681] usb 2-1.2: device not accepting address 93, error -32
[ 1221.585632] usb 2-1.2: new full-speed USB device number 94 using ehci-pci
[ 1221.993340] usb 2-1.2: device not accepting address 94, error -32
[ 1221.993467] usb 2-1-port2: unable to enumerate USB device
[ 1222.153244] usb 2-1.2: new full-speed USB device number 95 using ehci-pci
[ 1222.225182] usb 2-1.2: device descriptor read/64, error -32
[ 1222.401065] usb 2-1.2: device descriptor read/64, error -32
[ 1222.576935] usb 2-1.2: new full-speed USB device number 96 using ehci-pci
[ 1222.648877] usb 2-1.2: device descriptor read/64, error -32
[ 1222.824755] usb 2-1.2: device descriptor read/64, error -32
[ 1223.000631] usb 2-1.2: new full-speed USB device number 97 using ehci-pci
[ 1223.408341] usb 2-1.2: device not accepting address 97, error -32
[ 1223.480293] usb 2-1.2: new full-speed USB device number 98 using ehci-pci
[ 1223.888013] usb 2-1.2: device not accepting address 98, error -32
[ 1223.888210] usb 2-1-port2: unable to enumerate USB device
[ 1224.035919] usb 2-1.2: new full-speed USB device number 99 using ehci-pci
[ 1224.107857] usb 2-1.2: device descriptor read/64, error -32
[ 1224.283717] usb 2-1.2: device descriptor read/64, error -32
[ 1224.459598] usb 2-1.2: new full-speed USB device number 100 using ehci-pci
[ 1224.531569] usb 2-1.2: device descriptor read/64, error -32
[ 1224.707428] usb 2-1.2: device descriptor read/64, error -32
[ 1224.883307] usb 2-1.2: new full-speed USB device number 101 using ehci-pci
[ 1225.291011] usb 2-1.2: device not accepting address 101, error -32
[ 1225.362968] usb 2-1.2: new full-speed USB device number 102 using ehci-pci
[ 1225.770678] usb 2-1.2: device not accepting address 102, error -32
[ 1225.770845] usb 2-1-port2: unable to enumerate USB device
[ 1225.918564] usb 2-1.2: new full-speed USB device number 103 using ehci-pci
[ 1225.990521] usb 2-1.2: device descriptor read/64, error -32
[ 1226.166422] usb 2-1.2: device descriptor read/64, error -32
[ 1226.342261] usb 2-1.2: new full-speed USB device number 104 using ehci-pci
[ 1226.414213] usb 2-1.2: device descriptor read/64, error -32
[ 1226.590097] usb 2-1.2: device descriptor read/64, error -32
[ 1226.765973] usb 2-1.2: new full-speed USB device number 105 using ehci-pci
[ 1227.173686] usb 2-1.2: device not accepting address 105, error -32
[ 1227.245623] usb 2-1.2: new full-speed USB device number 106 using ehci-pci
[ 1227.653336] usb 2-1.2: device not accepting address 106, error -32
[ 1227.653476] usb 2-1-port2: unable to enumerate USB device
[ 1228.860495] usb 2-1.2: new full-speed USB device number 107 using ehci-pci
[ 1228.932428] usb 2-1.2: device descriptor read/64, error -32
[ 1229.108301] usb 2-1.2: device descriptor read/64, error -32
[ 1229.284176] usb 2-1.2: new full-speed USB device number 108 using ehci-pci
[ 1229.356411] usb 2-1.2: device descriptor read/64, error -32
[ 1258.065448] usb 1-1.2: new full-speed USB device number 3 using ehci-pci
[ 1258.161085] usb 1-1.2: New USB device found, idVendor=03f0, idProduct=a407
[ 1258.161096] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1258.161103] usb 1-1.2: Product: HP Link-5 micro dongle
[ 1258.161108] usb 1-1.2: Manufacturer: HP
[ 1260.639298] usbcore: registered new interface driver usbhid
[ 1260.639302] usbhid: USB HID core driver
[ 1260.831272] input: HP HP Link-5 micro dongle as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:03F0:A407.0001/input/input27
[ 1260.831509] hid-generic 0003:03F0:A407.0001: input,hidraw0: USB HID v1.11 Keyboard [HP HP Link-5 micro dongle] on usb-0000:00:1a.0-1.2/input0
[ 1260.832833] input: HP HP Link-5 micro dongle as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/0003:03F0:A407.0002/input/input28
[ 1260.836545] hid-generic 0003:03F0:A407.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [HP HP Link-5 micro dongle] on usb-0000:00:1a.0-1.2/input1
[ 2929.973387] usb 1-1.1: new full-speed USB device number 4 using ehci-pci
[ 2930.045335] usb 1-1.1: device descriptor read/64, error -32
[ 2930.221208] usb 1-1.1: device descriptor read/64, error -32
[ 2930.397092] usb 1-1.1: new full-speed USB device number 5 using ehci-pci
[ 2930.469042] usb 1-1.1: device descriptor read/64, error -32
[ 2930.644920] usb 1-1.1: device descriptor read/64, error -32
[ 2930.820792] usb 1-1.1: new full-speed USB device number 6 using ehci-pci
[ 2931.228497] usb 1-1.1: device not accepting address 6, error -32
[ 2931.300447] usb 1-1.1: new full-speed USB device number 7 using ehci-pci
[ 2931.708169] usb 1-1.1: device not accepting address 7, error -32
[ 2931.708373] usb 1-1-port1: unable to enumerate USB device
[ 5567.369375] usb 1-1.1: new full-speed USB device number 8 using ehci-pci
[ 5567.441321] usb 1-1.1: device descriptor read/64, error -32
[ 5567.617195] usb 1-1.1: device descriptor read/64, error -32
[ 5567.793070] usb 1-1.1: new full-speed USB device number 9 using ehci-pci
[ 5567.865020] usb 1-1.1: device descriptor read/64, error -32
[ 5568.040902] usb 1-1.1: device descriptor read/64, error -32
[ 5568.216771] usb 1-1.1: new full-speed USB device number 10 using ehci-pci
[ 5568.624480] usb 1-1.1: device not accepting address 10, error -32
[ 5568.696434] usb 1-1.1: new full-speed USB device number 11 using ehci-pci
[ 5569.104143] usb 1-1.1: device not accepting address 11, error -32
[ 5569.104221] usb 1-1-port1: unable to enumerate USB device
[ 5893.110604] usb 2-1.2: new low-speed USB device number 109 using ehci-pci
[ 5893.208644] usb 2-1.2: New USB device found, idVendor=046d, idProduct=c00e
[ 5893.208652] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5893.208657] usb 2-1.2: Product: USB-PS/2 Optical Mouse
[ 5893.208662] usb 2-1.2: Manufacturer: Logitech
[ 5893.212904] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:046D:C00E.0003/input/input41
[ 5893.213306] hid-generic 0003:046D:C00E.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1.2/input0
[ 6003.083065] usb 1-1.2: USB disconnect, device number 3
[ 6003.480444] usb 1-1.1: new full-speed USB device number 12 using ehci-pci
[ 6003.552389] usb 1-1.1: device descriptor read/64, error -32
[ 6003.728255] usb 1-1.1: device descriptor read/64, error -32
[ 6003.904132] usb 1-1.1: new full-speed USB device number 13 using ehci-pci
[ 6003.976074] usb 1-1.1: device descriptor read/64, error -32
[ 6004.151955] usb 1-1.1: device descriptor read/64, error -32
[ 6004.327832] usb 1-1.1: new full-speed USB device number 14 using ehci-pci
[ 6004.735546] usb 1-1.1: device not accepting address 14, error -32
[ 6004.807497] usb 1-1.1: new full-speed USB device number 15 using ehci-pci
[ 6005.215194] usb 1-1.1: device not accepting address 15, error -32
[ 6005.215404] usb 1-1-port1: unable to enumerate USB device
Does it help or should i try an other command option?
Sorry to ask but i'm a lost.
Looks as if your USB port has some problems ...
Did you try on a different port yet?
Sent from my Nexus 7 using XDA-Developers mobile app
AndDiSa said:
Looks as if your USB port has some problems ...
Did you try on a different port yet?
Sent from my Nexus 7 using XDA-Developers mobile app
Click to expand...
Click to collapse
Yes i got 3 USB ports and i tried all of them :/
I think i will try on an other computer but i was wondering if it's not easier to use an old version of Windows (xp or 7) to get it work ?
Not really sure if that will help .. I am using a laptop with Ubuntu, too, and do not have any problems, but I am using always the USB 2.0 port because once I had problems connecting to a USB 3.0 port, too.
Sent from my Nexus 7 using XDA-Developers mobile app
I tried to plug the nexus 7 ( bootloader mode) to a windows 7/10 PC (without drivers installed) and i have exactly the same error on both os:
Is it normal ?
Thanks for your help.
Related
Hi,
I recently acquired a TF101 and I am trying to do some development on it.
I have USB debugging on and tried to put it in APX mode by powering up using vol + and power button. It is connected to laptop running ubuntu 12.04 and I see following kernel messages
[ 3650.272049] usb 3-1: new low-speed USB device number 38 using ohci_hcd
[ 3650.452045] usb 3-1: device descriptor read/64, error -62
[ 3650.736044] usb 3-1: device descriptor read/64, error -62
[ 3651.016046] usb 3-1: new low-speed USB device number 39 using ohci_hcd
[ 3651.196038] usb 3-1: device descriptor read/64, error -62
[ 3651.484049] usb 3-1: device descriptor read/64, error -62
[ 3651.764103] usb 3-1: new low-speed USB device number 40 using ohci_hcd
[ 3652.172100] usb 3-1: device not accepting address 40, error -62
[ 3652.348103] usb 3-1: new low-speed USB device number 41 using ohci_hcd
[ 3652.756046] usb 3-1: device not accepting address 41, error -62
[ 3652.756060] hub 3-0:1.0: unable to enumerate USB device on port 1
any suggesstions ?
viewlessguru said:
Hi,
I recently acquired a TF101 and I am trying to do some development on it.
I have USB debugging on and tried to put it in APX mode by powering up using vol + and power button. It is connected to laptop running ubuntu 12.04 and I see following kernel messages
[ 3650.272049] usb 3-1: new low-speed USB device number 38 using ohci_hcd
[ 3650.452045] usb 3-1: device descriptor read/64, error -62
[ 3650.736044] usb 3-1: device descriptor read/64, error -62
[ 3651.016046] usb 3-1: new low-speed USB device number 39 using ohci_hcd
[ 3651.196038] usb 3-1: device descriptor read/64, error -62
[ 3651.484049] usb 3-1: device descriptor read/64, error -62
[ 3651.764103] usb 3-1: new low-speed USB device number 40 using ohci_hcd
[ 3652.172100] usb 3-1: device not accepting address 40, error -62
[ 3652.348103] usb 3-1: new low-speed USB device number 41 using ohci_hcd
[ 3652.756046] usb 3-1: device not accepting address 41, error -62
[ 3652.756060] hub 3-0:1.0: unable to enumerate USB device on port 1
any suggesstions ?
Click to expand...
Click to collapse
If your using USB 3.0 ports to connect the tablet try switching to a usb 2.0 port. usb3 has been known to cause add issues sometimes.
Try each of your USB ports. I have issues with my tablet not being seen on all but one port on my PC. Even though stuff works in the other ports It still was not seen.
Sent from my Transformer TF101 using xda premium
What do you see on "$lsusb"?
Can you see an Nvidia Device?
Hi,
I was trying to flash a new rom, and i did a very bad thing.
I flashed an incorrect file 0-PrimaryGPT.img on my lg g2.
Then i can not get dowload mode, recovery or anything else. In windows i see just an unrecognized device.
In ubuntu i just see using dmesg:
[ 1156.392274] usb 2-1: new high-speed USB device number 7 using ehci-pci
[ 1171.504275] usb 2-1: device descriptor read/64, error -110
[ 1186.720115] usb 2-1: device descriptor read/64, error -110
[ 1186.936293] usb 2-1: new high-speed USB device number 8 using ehci-pci
[ 1202.048161] usb 2-1: device descriptor read/64, error -110
[ 1217.264175] usb 2-1: device descriptor read/64, error -110
[ 1217.480078] usb 2-1: new high-speed USB device number 9 using ehci-pci
[ 1227.888175] usb 2-1: device not accepting address 9, error -110
[ 1228.000258] usb 2-1: new high-speed USB device number 10 using ehci-pci
[ 1238.408064] usb 2-1: device not accepting address 10, error -110
[ 1238.408099] hub 2-0:1.0: unable to enumerate USB device on port 1
[ 1238.672141] usb 6-1: new full-speed USB device number 6 using uhci_hcd
[ 1253.784150] usb 6-1: device descriptor read/64, error -110
[ 1269.000132] usb 6-1: device descriptor read/64, error -110
[ 1269.220059] usb 6-1: new full-speed USB device number 7 using uhci_hcd
[ 1284.332075] usb 6-1: device descriptor read/64, error -110
[ 1299.556068] usb 6-1: device descriptor read/64, error -110
[ 1299.776090] usb 6-1: new full-speed USB device number 8 using uhci_hcd
[ 1310.184174] usb 6-1: device not accepting address 8, error -110
[ 1310.296076] usb 6-1: new full-speed USB device number 9 using uhci_hcd
[ 1320.704056] usb 6-1: device not accepting address 9, error -110
[ 1320.704105] hub 6-0:1.0: unable to enumerate USB device on port 1
There are any option to recover it, someone do recover from a situation like this ?
Thanks in advance.
So I currently am running ubuntu 15 and another computer with mint 17.
ON both computers I have tried heimdall and Jodin. Both have been unable to obtain a pit file. I get that error -7 which appears to be something related to not receiving any packets back from the phone.
When I connect the phone outside of download mode - adb works also
$Dmesg | tail
[email protected]:~$ dmesg | tail
[ 2663.619751] cdc_acm 3-1.1:1.1: failed to set dtr/rts
[ 2663.691610] cdc_acm 3-1.1:1.1: ttyACM2: USB ACM device
[ 2663.693138] usb 3-1.1: USB disconnect, device number 7
[ 2663.911119] usb 3-1.1: new high-speed USB device number 8 using ehci-pci
[ 2664.021218] usb 3-1.1: New USB device found, idVendor=04e8, idProduct=6860
[ 2664.021231] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2664.021238] usb 3-1.1: Product: SAMSUNG_Android
[ 2664.021245] usb 3-1.1: Manufacturer: SAMSUNG
[ 2664.021250] usb 3-1.1: SerialNumber: 4b6bda34
[ 2664.023462] cdc_acm 3-1.1:1.1: ttyACM2: USB ACM device
[email protected]:~$ adb devices
List of devices attached
4b6bda34 device
In download mode...$dmesg | tail
[email protected]:~$ dmesg | tail
1062.584521] usb 3-1.1: new high-speed USB device number 3 using ehci-pci
[ 1062.693317] usb 3-1.1: New USB device found, idVendor=04e8, idProduct=685d
[ 1062.693328] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1062.693334] usb 3-1.1: Product: MSM8960
[ 1062.693339] usb 3-1.1: Manufacturer: Sasmsung
[ 1062.807263] cdc_acm 3-1.1:1.0: ttyACM0: USB ACM device
[ 1062.807597] usbcore: registered new interface driver cdc_acm
[ 1062.807601] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[email protected]:~$ adb devices
List of devices attached
Not quite sure what to make of this. Especally the spelling of "Samsung" ...the product doesn't match. I don't know why its showing as a CDC_ACM modem. I was toying with the idea of blacklisting it again. But I tried that on my mint distro and it had no effect. ADB also shows no devices but Heimdall detects it. Fastboot also shows no devices during download mode. I'm kind of stuck here. Not sure how to fix this error.
-All drivers are installed
- 51 rules don't fix it
-blacklisting cdc doesn't work
-swapping doesn't work
Anyone have any ideas?
?
http://www.droidviews.com/how-to-extract-pit-file-from-samsung-galaxy-devices/
Hi,
I am attaching USB to my Ubuntu 14.04 but getting following logs. Looks like USB-C type is not supported on Ubuntu. Could you please guide me how to enable, or any driver?
lsusb logs:
Code:
[ 127.987537] usb 1-1.1: new high-speed USB device number 5 using ehci-pci
[ 128.081611] usb 1-1.1: New USB device found, idVendor=2b0e, idProduct=1714
[ 128.081622] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 128.081627] usb 1-1.1: Product: Android
[ 128.081631] usb 1-1.1: Manufacturer: Android
[ 128.081635] usb 1-1.1: SerialNumber: 57638e68
[ 146.986991] usb 1-1.1: USB disconnect, device number 5
[ 147.184969] usb 1-1.1: new high-speed USB device number 6 using ehci-pci
[ 147.279176] usb 1-1.1: New USB device found, idVendor=2b0e, idProduct=1714
[ 147.279184] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 147.279187] usb 1-1.1: Product: Android
[ 147.279190] usb 1-1.1: Manufacturer: Android
[ 147.279193] usb 1-1.1: SerialNumber: 57638e68
Adb devices:
Code:
adb devices
List of devices attached
I'm using Debian 8.8 and it works fine for me. Try updating your system. Ubuntu 17 is out now.
Sent from my X526 using Tapatalk
Does it work with 'sudo'?
I have been trying to flash some old M2 Note units and so far I can't get the Preloader to talk over USB:
Code:
[ 1774.167123] usb 1-1: new high-speed USB device number 35 using xhci_hcd
[ 1774.320150] usb 1-1: New USB device found, idVendor=0e8d, idProduct=2000, bcdDevice= 1.00
[ 1774.320152] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1774.320153] usb 1-1: Product: MT65xx Preloader
[ 1774.320153] usb 1-1: Manufacturer: MediaTek
[ 1774.344085] cdc_acm 1-1:1.0: Zero length descriptor references
[ 1774.344093] cdc_acm: probe of 1-1:1.0 failed with error -22
[ 1774.384238] cdc_acm 1-1:1.1: ttyACM0: USB ACM device
[ 1776.971989] usb 1-1: USB disconnect, device number 35
I tried adding the vendor ID and product ID to the new_id of the cdc_acm driver and also masking/disabling the ModemManager service in case it was interfering.
I had the same issue on WIndows... it would reset immediately and kick into normal Android mode.
Anyone has any advice? I'm going to trying using the OTA zip with the modified/unlocked images for the preloader.
Flashing TWRP via Flashify did not work out.... rebooted into recovery to the default Meizu one.