Hey, everyone! This is the CyanogenMod (Modded) ROM that I have made! I have made two versions, one is the CM11 (this one) and the CM10.2 (Find on my profile)
DOWNLOADS
CM11 MODDED Pre-Snapshot (M1) Based on M12 - http://www.mediafire.com/download/3...6-PRE-SNAPSHOT-M1_BASED_ON_CM11_M12_d2lte.zip
CM11 - MODDED Based on HTC Sense 6 - COMING SOON
CM11 Modded is expecting a BIG overhaul soon!
Version 1 and 1.1 are now removed, files were not working.
Thank you for downloading! Nightlies are not guaranteed, but Monthlies are almost 100% guaranteed.
Instructions
1.) Install TWRP or CWM Recovery.
2.) Install the files onto your device.
3.) Boot into recovery. (PRESS VOLUME UP + HOME + POWER UNTIL IT SAYS "BOOTING INTO RECOVERY")
4.) BACKUP YOUR PHONE. I AM NOT RESPONSIBLE FOR WHAT HAPPENS TO YOUR DEVICE, THIS IS PURELY EXPERIMENTAL.
5.) Factory Rest.
6.) "Install zip," then choose the GApps and the cm-11 MOD file.
That's it! Reboot, and you SHOULD have cm-11 modded!
Basically, it changes sounds, and some of the boot animations. Review how it is in the Reviews tab!
XDA:DevDB Information
+1 Like Tweet Rating: 5 [PRE-SNAPSHOT] CM-11 Modified for Samsung Galaxy S III , ROM for the Samsung Galaxy S III I9300
Contributors
cyanogen_patrick
Source Code: https://github.com/cyanogenmod
ROM OS Version: 4.4.x KitKat
ROM Firmware Required: Android 4.2.1 or below
Based On: CyanogenMod
Version Information
Status: Testing
Created 2014-12-14
Last Updated 2014-12-14
Download Link - CM 12.1/Android 5.1.1:
Update CM 12..1 05/01 -
AndroidFileHost
Instructions:
Flash ROM(Link above)
BaNkS GAPPS - GAPPS
Donations
Please donate to keep this project alive!! It costs to maintain the hardware, Internet for the frequent updates and various fixes
Change log for 04/22 Build:
Android 5.1.1_r1
Stable Camera
USB OTG Update - This will make OTG super stable - This will be part of next release
Reboot Fix
CM Code Catch-up
Bluetooth updates
Memory optimisation
New CM SMart Dialer
Return of Silent mode
Silent mode toggle
CM File Manager update - I am not sure if anyone uses this
MMS Updates
Time to switch back to nuplayer
Things which are broken:
You tell me
*NewCM team have introduced couple of new apps which are included in this build. Check the build for the surprise
Ignore the titles of the download files, I have to fix those
XDA:DevDB Information
Lolli POP, ROM for the LG G4
Contributors
supy99, matrixzone
ROM OS Version: 5.1.x Lollipop
Based On: CyanogenMod
Version Information
Status: Nightly
Created 2015-05-07
Last Updated 2015-05-07
Reserved
Also Reserved
What is this rom based off of? Since the U.S. Variants aren't released yet, is this a port from the G3? Or from a Korean variant?
How do you flash when you can't root or install twrp?
No kernel source and placeholders are not allowed.
Provide GPL-compliant kernel source and something to actually download and flash, and the thread will be opened.
Mod edit: Thread closed for linking off-XDA support and Pay-per-click download links. Please review the forum rules for further details.
Samsung j2
Samsung j2
MINHKA_J2MM
Android 6.0.1 port from on5 or prom j1
I proudly present MINHKA_J2MM port rom for samsung galaxy j200g / j200gu/ j200m/ j200f.Using exynos 3475 chipset. This is a stock touchwiz based android 6.0 rom for j2 ported from on5
Disclaimer
*Your warranty is now void.
*I am not responsible for bricked devices, dead SD cards,thermonuclear war.
*Please do backup before flashing the rom
Rom, kernel info :
* Cpu overclocked to 1.5 ghz
* Stock touchwiz 6.0 apps
* Busmif frequency increased to 825mhz from 666mhz
* Cpu vontage control
Supported devices :
* J200gu
* J200g
* J200F
* J200M
( dont try to flash this rom on a unsupported devices like j200h )
Information :
1. Download the MINHKA_J2MM_ON5.zip to your sdcard
2. Boot the device in to recovery mode (twrp) then wipe data, cache, davlink, system
3. Select the insatll from sdcard and choose MINHKA_J2MM_ON5.zip ,follow the aroma installer instructions
4. Reboot the device
5. First reboot may take several minutes
6. Its not a pre-rooted rom ,so flash supersu after flashing the rom
Mod edit: please keep download links and support here on XDA. Links removed.
XDA:DevDB Information
J2LTE, ROM for the Samsung Galaxy J2
Contributors
minhka98
Source Code: https://github.com/minhka/kernel-J200GUDXU3AQC1
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: 5.1.1
Based On: aosp. aokp
Version Information
Status: Testing
Current Beta Version: v2.0
Beta Release Date: 2018-03-03
Created 2018-03-02
Last Updated 2018-03-27
Wifi not properly work. Google contact and flash light not work
saravanan1438222 said:
Wifi not properly work. Google contact and flash light not work
Click to expand...
Click to collapse
fixed
I am using J1 (2016). Can you send me base rom? I want install this.
fixbug simcard, flashlight ,google contact, in here Mod edit: please keep download links and support here on XDA. Link removed.
Front canera fc
Its so cool man ... thansks ...
J200f is lte will it work?
btw ... how to add radiofm apps ... ?
Hii... ur number dey my galaxy j2 root fairest me
nope
minhka98 said:
fixed
Click to expand...
Click to collapse
What you have done is worth mentioning. Great attempt and it works aswell except for the following bugs :
torch isnt working (it works for the taking photos in dark) cannot manually toggle it
cannot add profile pictures for contacts
the front camera isnt working
kindly rectify these asap
bro, it get bootloop in J200GU
Can you please tell its Bugs ?????
And which version is bug free ??
installed very smoothly working good but no volte . in ver 5.1.1 it was enabled
installed very smoothly working good but no volte in this version . in ver 5.1.1 it was enabled in j200g
Volte is not enabled in MINHKA_J2MM Android 6.0.1 port from on5 kindly give the solut
Volte is not enabled in MINHKA_J2MM Android 6.0.1 port from on5 kindly give the solution :angel:
Is kernel not bundled with ROM?
Do I need to separately flash the kernel zip in order to get Synapse and the 1.5 GHz overclocking?
So basically in TWRP I have to flash 1. ROM, 2. Kernel, 3. SU, 4. etc.
Right?
BlOoMind said:
Do I need to separately flash the kernel zip in order to get Synapse and the 1.5 GHz overclocking?
So basically in TWRP I have to flash 1. ROM, 2. Kernel, 3. SU, 4. etc.
Right?
Click to expand...
Click to collapse
just flash only rom
Ive sucessfully flashed it on my J200BT.
BUGS: Camera failed / Torch not working
DTV works?
The dtv works on J200BT?
I use v4
Its great to view and daily used ...
Thanks devs ...
Welcome to The OxygenKernel Thread for the Galaxy J3
Warning : Me nor XDA Are responsible for any damage that might be caused after flashing any file provided here. Please take caution and be aware of what you are doing. And Always backup !
-- Features --
[x]Init.d support
[x]Patches DM-Verity.
[x]Patches the system to fix WIFI and Bluetooth not turning on when using custom kernels.
[x]Fake Enforcing (Permissive and shows enforcing)
[x]Fake KNOX
[x]RMM-KnoxGuard Free
[x]Other improvments for Batterylife and performance
[x]Many ram improvments
[x]No sim breaking with 8.1 rooting
--How to install--
Boot in TWRP Recovery
Fully Wipe internal storage and format data (Must for first time flashing TWRP)
Copy Kernel to your desired Location
Install Image and select Boot.img. Install as Boot Image.
Reboot and wait
--Basic Info --
This kernel is mainly for users who want more than just root, As permissive allows for more flexibility with some of the mods found on xda, and it is customizable to get the most out of your device. You are free to use this kernel in any future rom aslong as you Link this thread
-- Credits --
@BlackMesa123
@topjonhuw For Magisk
asysh
Download <> More info In second Post
XDAevDB Information
OxygenKernel for the Samsung Galaxy J3
Contributors
ME
Version Information
Status: Stable
Current Stable Version: V1
Stable Release Date: 05.06.2019
Created 05.06.2019
Last Updated 05.06.2019
Downloads
Downloads:
OxygenKernel V1
Download :
Mega:https://mega.nz/#!2fZGHASQ!nzZyAGv3_0SGx8qDJTdjBwGP4IZtLfTbmqOISgtB0HM
link dead
ExtremeGrief said:
Downloads
Downloads:
OxygenKernel V1
Download :
Mega:https://mega.nz/#!2fZGHASQ!nzZyAGv3_0SGx8qDJTdjBwGP4IZtLfTbmqOISgtB0HM
Click to expand...
Click to collapse
link dead
Hello,im recently find this Awesome Dotos from this Thread by TryHarddood
https://tryharddood.github.io/hermes-mirrors/index.html?releaseId=5897305#/releases
so why you dont try out this rom?maybe others can rebuild for a super stable version?
Code:
/*
*
* Your warranty is now void.
* We are not responsible for anything that may happen to your phone by installing any custom ROMs and/or kernels.
* You do it at your own risk and take the responsibility upon yourself and you are not to blame us or XDA and its respected developers.
*
*/
"This is a user friendly thread, all your suggestions are important to us and will be taken into consideration.."
dotOS is an Android Rom which focuses on performance and stability. Our aim is to enable a user to extract as much juice as possible and get most out of his/her device.
Initially started by Mohan CM and later joined by Ganesh, Sam, Kuber, Iacob and Hari. Together we stand strong.
Stability and Performance
Lagfree with High Performance Results
Clutterless UI
Perfect Interface for every User
Enhanced default apps
Redesigned settings and QS panel
Full OMS support
Colour Engine Support
CLEAN FLASH :
Download the latest build and GApps
Reboot to recovery
Make NAndroid backup (Not Necessary)
Wipe System, Data, Cache , Dalvik
Flash the latest build and GApps
Reboot
DIRTY FLASH :
Download the latest build
Reboot to recovery
Flash the latest build
Wipe Cache
+Reboot
+The ROM has GApps persistence in between dirty flashes, so you only have to flash them once!
+The root solution should be flashed together with every OTA update (= ROM Update) as long as the instructions of your
+root solution do not state something else (="persistence on dirty flashing") !
Download ROM:
https://github.com/TryHardDood/herm...mes/DOT-N-v1.2-20180913-hermes-UNOFFICIAL.zip
LineageOS 14.1 tree
Works
Adjustable brightness
Audio
Auto brightness
MTP and Mass Storage modes
Vibration
Rotation
RIL
Video
Gallery
Mic
Wi-Fi
Bluetooth
Internet
GPS
Hotspot
Camera rear/front
SD Card
IR Blaster
Not Working
Video Recording
Credits
@Dinolek for his source tree and helping me fix adb on pie(don't worry I have already took his permission before)
@Smosia for his new hennessy tree and his fixes
@nofearnohappy
@jianminglok
@danielpinto8zz6
@andrea2107
@l7ssha
@Syl157
@danielhk (for his updated gps hal)
@ibilux (for his help to fix the bugs)
..
Download Gapps:
Note : Pico Gapps are recommended. - arm -7.1-pico
OpenGApps
Source Code: https://github.com/DotOS
ROM OS Version: 7.1.2 Nougat
ROM Kernel: Unknown
ROM Firmware Required: latest TWRP recovery
Based On: LineageOS
Version Information
Status: Unknown
Current stable Version: v1.2 final
Stable Release Date: Unknown
Created Unknown
Last Updated Unknown
rom chạy rất nhanh và chỉ có lỗi về máy ảnh