Ubuntu Touch for OPO - ONE General

https://devices.ubports.com/#/bacon
Apparently stable has been released, unfortunately i don't have the means to test it yet.
Anyone tried out the release? Cannot find proper material on the functionality and or features.
Site claims it's good for daily use, therefore if anyone can test it and report, would be awesome.
Edit. Build does not work daily

How is this a daily driver when the release clearly states GPS & Camera still doesnt work? ?

https://devices.ubports.com/#/
Here says :
Active devices are devices that are fully working as daily drivers, it requires to have wifi, call, sms, data, OTA, apparmor and sound to be working to be an "Active device".
Only bluetooth is not working according to the list on that website.

Camera and GPS "work" but still have major issues.
Extremely buggy. Not stable.

TapioH said:
https://devices.ubports.com/#/
Here says :
Active devices are devices that are fully working as daily drivers, it requires to have wifi, call, sms, data, OTA, apparmor and sound to be working to be an "Active device".
Only bluetooth is not working according to the list on that website.
Click to expand...
Click to collapse
Notice you didn't list camera or GPS on that list. 2 things still not completely working. If you click on the device it has a list of features in red and green on the next page.
Camera & GPS are in red but listed, meaning they work, but are very buggy. I've used these builds before man...you clearly haven't as you are asking someone to test it for you.
If you're idea of a "daily driver" is no Bluetooth & barely working camera/GPS you don't understand the meaning of "daily driver." From a technical standpoint all that is required for the Ubuntu dev page to be a daily driver is if everything works, not if everything works flawlessly...
I'm all for people testing this but its not good to convince people to install this on their phones with false pretenses.
*TO ALL AVERAGE USERS. FEEL FREE TO TRY, BUT THIS IS NOT A DAILY DRIVER. DO NOT LISTEN TO THIS GUY EXPECTING THIS TO FUNCTION LIKE A PERFECT ROM BUILD.

I've been using Ubuntu on my PC for years and I really want Ubuntu phone to carve up its share in the market. I installed Ubuntu Touch via multirom and it is barely an OS especially if you are coming from XDA and its riches. It was buggy, the camera didn't work and even if everything were to work flawless, you'll be still lacking the apps to make phone a bit smarter.

check the site just bluetooth is not working rest fine but cant install via multirom recovery v33b doesn't boots help how to do so

Dhairya said:
check the site just bluetooth is not working rest fine but cant install via multirom recovery v33b doesn't boots help how to do so
Click to expand...
Click to collapse
So you couldn't even get the OS to boot but here you are claiming how pretty much everything works? Lol

Dhairya said:
check the site just bluetooth is not working rest fine but cant install via multirom recovery v33b doesn't boots help how to do so
Click to expand...
Click to collapse
You have to install the Multirom-recovery from February manually, the lastest one doesn't work with Ubuntu Touch on the OPO. Also make sure to have everything ext4 formatted, had problems with f2fs and Multirom.
Once Ubuntu Touch is installed it's pretty stable and somewhat fast (not as fast as Android MM tho). But the lack (and quality) of apps really is a problem

StarStorm said:
You have to install the Multirom-recovery from February manually, the lastest one doesn't work with Ubuntu Touch on the OPO. Also make sure to have everything ext4 formatted, had problems with f2fs and Multirom.
Once Ubuntu Touch is installed it's pretty stable and somewhat fast (not as fast as Android MM tho). But the lack (and quality) of apps really is a problem
Click to expand...
Click to collapse
can u give me the link of it plz of recovery and secondly if download multi-rom apk its show by default v33b i tired installing v32j flashable but said Ubuntu wont work u need latest v33b if link can be der would be helpful !
---------- Post added at 08:14 PM ---------- Previous post was at 08:14 PM ----------
h11wiscan said:
So you couldn't even get the OS to boot but here you are claiming how pretty much everything works? Lol
Click to expand...
Click to collapse
check the site bro its has all your answers !

Thanks for the responses everyone. It appears people had more knowledge on the subject than me. So it's nowhere near "daily driver".
Keeping my hopes up for a fully functioning one though.

flashed latest stable v14 cannot make or receive calls sim gets detected network comes too for eg:- if i call from any other phone then its rings but doesnt shows on my phone

TapioH said:
Thanks for the responses everyone. It appears people had more knowledge on the subject than me. So it's nowhere near "daily driver".
Keeping my hopes up for a fully functioning one though.
Click to expand...
Click to collapse
You should edit your first post as a favor to the newer members who might try this under the false pretenses of your first post. :good:

Ubuntu Touch
I am excited I got Ubuntu touch and wifi working. If anyone wants the instructions, let me know.

hi can you give me the instructions, thank yhou

I think this page have everything you need https://devices.ubuntu-touch.io/installer, found it from https://forum.xda-developers.com/oneplus-one/general/ubuntu-touch-opo-t3433634
Please search before asking in a new thread. this consider spamming.

Related

[ROM] Unofficial CyanogenMod 9 [BLECM9 0.02]

Current status: CM10.1 in the works and this version will not be updated.
Got started with the project in January, I'm now ready to present you my first custom ROM (and kernel) - BLECM9!
First of all - BACKUP! This is not stable for everyday use just yet.
It also includes my own kernel, based on the latest CAF source code (ics_chocolate). The kernel gets frequent updates from CAF and me. Kernel version is 3.0.8. It's not as stable in the beginning but a better choice in the long term.
It won't include Google Apps, you need to manually install gapps package, as any other CM rom is by default.
Prequisites
U8800 upgraded to 2.3
ClockworkMod Recovery v5.5.0.4, not tested in v5.0.2.7
Instructions for Installing
Download the latest version of BLECM9 (Downloads below).
Copy the package to your internal/external SD card.
Reboot to recovery.
Flash the update package.
Optional: Install Gapps package (Downloads below).
Reboot and wait. The first boot takes around 2 minutes.
Downloads
My Google Code Page
Google Apps @ goo.im
Additional Notes
Report issues.
Changelog.
No, this won't work on U8800-51 or U8800Pro.
Atmel TS users, 0.02 will not work for you. I am establishing a new driver, to make the driver standard. Please standby as this is my top priority.
Everybody, send me logs if something does not work. This kernel is under heavy development. On computer with ADB set up: "adb shell dmesg > dmesg.log" and send the dmesg.log
Major Bugs
No Atmel TS support.
RIL issues (does not detect all SIMs)
NT35510 seems to have issues when turning on the screen (confirm?)
Unstable backlight on low values.
Wifi MAC address is 00:11:22:33:44:55
No Camera.
No Bluetooth.
No FM radio.
No audio (except ringtone/alarm)
Sometimes glitchy hardware acceleration.
No sensors.
More...
Credits: Huge thanks to dzo - without the proprietary blobs from him, this would've not been possible.
This is not just a work of mine, recently another developer joined the process and we are working together.
Collaborators: asm19
Feel free to contact me and also - contribute! Links for the source code is up on my GitHub (signature).
Follow my Twitter to see my development progress.
awesome. lets try
edit: when i try to write wifi password... see attachement. i can still write password, but i can't see what i am writing. everything works good in messeges
2nd edit: common cm problem... error while searching for network
Thanks for sharing.Looks good.
Been waiting for this. I will try it asap. I'm sure it will be get better day by day. Many thanks.
First of all Thank you!
First Impressions:
Touchscreen feels really responsive.
Rom feels very fast too.
Wifi is working good.
Bugs that I've found:
Screen flickering (unstable backlight)
Can't mount SDCard.
RIL isn't working on my u8800.
Overall it looks very promising!
Logs attached.
brdnacer said:
awesome. lets try
edit: when i try to write wifi password... see attachement. i can still write password, but i can't see what i am writing. everything works good in messeges
Click to expand...
Click to collapse
Yes, It's related to HW acceleration, causing some UI glitches.
Have been waiting for this for a long time, even if can't even use it because of Amtel TS.
Keep up with this awesome work
Thanks for this!
I'm using b518 and my phone is multibooting.My phone has recovery made by VICTOR TEAM (genokolar) .This ROM can be a problem for me in terms of Multiboot?Because you writed this in changelog;
New Partition Table.
Click to expand...
Click to collapse
Thank you in advance for the answer to my question!
Best regards...
Great! Been waiting for CM9 a long time ago too... Blefish, you should post some rules as to what we should and how to post in this thread, maybe instructions on how to post specific logs and what kind of info you need. The rest of the discussion should be posted in the general section. I would really hate for this thread to become a mess like Aurora's...
Sent from my U8800
I flashed 0.02, touchscreen didn't work. Then flashed Atmel-test2, touchscreen still doesn't work. Also phone reboots randomly.
I suggest to all of you interested helping Blefish, follow him on Twitter.
For those who tried Atmel-test-2-signed.zip
Blefish @ Twitter said:
Can you try doing in Terminal: "cat /devices/i2c-0/0-004a/input/input1" Do you get any output when touching?
Click to expand...
Click to collapse
forumber2 said:
Thanks for this!
I'm using b518 and my phone is multibooting.My phone has recovery made by VICTOR TEAM (genokolar) .This ROM can be a problem for me in terms of Multiboot?Because you writed this in changelog;
Thank you in advance for the answer to my question!
Best regards...
Click to expand...
Click to collapse
No changes done yet, it works like any other ROM right now.
Blefish said:
No changes done yet, it works like any other ROM right now.
Click to expand...
Click to collapse
Thanks for your answer.
I have one more question.Can i use your bootloader with multibooting?
I will test this after I have unbricked my galaxy tab (I don't want 2 problems same time)
Sent from my U8800 using Tapatalk 2
Is a good iniciative is a belfish source code?
Thanks for the feedback.
I am currently very busy in real life, exams are coming up too. I'll see if I can release another version sometime soon, to get the base working properly.
@Belfish don´t u have stoped de dev of cm9?
---------- Post added at 05:56 PM ---------- Previous post was at 05:53 PM ----------
Blefish said:
Thanks for the feedback.
I am currently very busy in real life, exams are coming up too. I'll see if I can release another version sometime soon, to get the base working properly.
Click to expand...
Click to collapse
Can u use libs from aurora?
anjo88 said:
@Belfish don´t u have stoped de dev of cm9?
Click to expand...
Click to collapse
Noo, I'm not going to stop, just saying I am bit busy so development might not be as fast in the coming 2-3 weeks.
Blefish said:
Noo, I'm not going to stop, just saying I am bit busy so development might not be as fast in the coming 2-3 weeks.
Click to expand...
Click to collapse
ok we wait bood luck for the exames is good if u have some help! Please put a donate button in thread so we can donate u a bear u diserv!
Another bug: it does not recognize my SIM card (TMN)
Also, LOTS of graphical bugs.

[ROM] Evervolv | 4.0.0p1 [AOSP 4.4.4] [3.4 kernel] [Nightlies] With /data/media

For those that don't know what evervolv is, Evervolv is an AOSP (Android Open Source Project) rom. We're fully open sourced and encourage it with no restrictions. The work put into this rom is community driven and and Evervolv Project is made up of numerous members and contributors.
Right now the current source we are working on is KITKAT(Android 4.4.4).
Current version: 4.0.0p1
Current Items not working/Buggy
Updated 4-4-14
Bluetooth working --Still a WIP as some devices don't connect
Camera working --Still a WIP as the camcorder records in blue and a few minor issues
home key doesn't turn device on need to use power button--FIXED in the next nightly should be 4-5-2014
Battery draw around 50mA in sleep
Some experience SOD when hotword detect is active
Location service has stopped with Googles update looking into now
You tell me what you find.
4G Models are not currently supported
Click to expand...
Click to collapse
Evervolv Github: https://github.com/Evervolv
Evervolv Gerrit: http://review.evervolv.com/
Evervolv website: http://www.evervolv.com/
(New Site is up Check it out)
Evervolv Bug Tracker: http://bugs.evervolv.com/
(Please have discretion when reporting issues, and be descriptive / helpful. Also understand that we'll have some growing pains with this. So don't expect everything to be perfect.)
Twitter: https://www.twitter.com/wbellavance
IRC: #evervolv
Click to expand...
Click to collapse
[GPL Compliance]
Kernel Source
Click to expand...
Click to collapse
[Download]
If you already have evervolv installed you should see this build under testing if you refresh and can download that way.
No more nightlies Moved to 5.0 Lollipop
ev_tenderloin-1-23-15 Last and final for 4.0 -> Fix netflix
FLINTMAN-TWRP-touch-data_media-SELINUX-2.7.1.0-6-7-2014.zip
--This is a flashing TWRP recovery with data/media and SELINUX support. I have tested 100% of the features and everything is working great as far as i can tell. Soo
with that being said. Use at your own risk 8). Make sure you save a backup from your current recovery just in case. BACKUP BACKUP BACKUP
--Broke Vibration as i updated kernel.
Click to expand...
Click to collapse
NOTE: Recommend a clean install if moving from a previous version and or another ROM.
Flashing from cm or any other ROM will require a clean install, dirty flashes can cause random reboots and random errors
[Disclaimer]
I am not responsible for bricked devices, lost data, etc, etc. You all know the drill. BACKUP BACKUP BACKUP
Click to expand...
Click to collapse
[Special Thanks]
i would like to thank Flemmard, Jcsullins, Dorregaray, Invisiblek, Milaq, and anyone else that helped to make this happen. More great work to come.
Mitchbaria --for a 4g model to start in on this
Colchiro-- For a spare Touchpad WIFI to be able to test on one and develop at the same time
Click to expand...
Click to collapse
GAPPS
---These are the gapps i use. You should be able to use any that are KitKat compatible
http://forum.xda-developers.com/showthread.php?t=2397942
Grabbing logcats and dmesg along with last_klog.
These are helpful in figuring out what is going on
Install the sdk in you PC http://developer.android.com/sdk/index.html
Logcat
"adb shell logcat >logcat.txt"
This will run until unplugged or ctrl c and all the content will go into that file
dmesg
"adb shell cat proc/kmsg >dmesg.txt"
This will run until unplugged or ctrl c and all the content will go into that file
Last_klog
"adb shell cat proc/last_klog >lastklog.txt"
This is for if you have a reboot run this right after the device starts back up and it will get me the last dmesg from before it reboot and will help determine the cause of the reboot.
This will help me and everyone that uses this ROM as i can determine the cause of issues.
Thanks
Thank you for the continued HP Touchpad Development and support Flintman.
Cheers:highfive:
Touchpad Toolbox By Jcsullins
[ROM GUIDE]How to use the TouchPad Toolbox to install Android "The Super Easy Way"
[GAPPS][4.4.x/4.3.x] OFFICIAL 0-Day PA-GOOGLE APPS (Use Mini or Micro packages)
Thanks to both of you. For the roms and the video walk thru. I haven't tried art on the touchpad because it actually makes my Galaxy Nexus slower most of the time. And with some gapps it's even worse. Since it isn't listed as broken I am assuming you have tried it. If I may ask. What gapps did you use and what was performance like? It prevented my nexus from booting at times. Just wanna stick with what you have tried until I get use to the new data media and such. Thanks again.
Moody66 said:
Thanks to both of you. For the roms and the video walk thru. I haven't tried art on the touchpad because it actually makes my Galaxy Nexus slower most of the time. And with some gapps it's even worse. Since it isn't listed as broken I am assuming you have tried it. If I may ask. What gapps did you use and what was performance like? It prevented my nexus from booting at times. Just wanna stick with what you have tried until I get use to the new data media and such. Thanks again.
Click to expand...
Click to collapse
I haven't tested as its still a wip from Google. I do have it as broken in the op. But good to know that it boots 8)
Sent from my SCH-I545 using xda app-developers app
Added another build see OP for what was changed. I also adding in a touch recovery TWRP with data/media and SELINUX support. This will also allow you access to your webOS media folder which is know in the new build as external_sd. I have tested out all the features and everything is working great but please save a full backup from your previous recovery if you decide to use this recovery as it's still in an Alpha state.
Enjoy
flintman said:
Added another build see OP for what was changed. I also adding in a touch recovery TWRP with data/media and SELINUX support. This will also allow you access to your webOS media folder which is know in the new build as external_sd. I have tested out all the features and everything is working great but please save a full backup from your previous recovery if you decide to use this recovery as it's still in an Alpha state.
Enjoy
Click to expand...
Click to collapse
Thanks a lot for this amazing ROM and the recovery I had few bug with the reboot ... The recovery freezed and i have to manually reboot to unfreeze it ... A part from that great job Can't wait to see what you are going to bring next
And just one little request ... I love having the clock center on the status bar ... Do you think you can add it to the Evervolv project ? That's would be a great feature
Lyok0ne said:
Thanks a lot for this amazing ROM and the recovery I had few bug with the reboot ... The recovery freezed and i have to manually reboot to unfreeze it ... A part from that great job Can't wait to see what you are going to bring next
And just one little request ... I love having the clock center on the status bar ... Do you think you can add it to the Evervolv project ? That's would be a great feature
Click to expand...
Click to collapse
I have flashed with this recovery about 20 times now and only got the reboot to hang once. I'm looking into it.
Lyok0ne said:
Thanks a lot for this amazing ROM and the recovery I had few bug with the reboot ... The recovery freezed and i have to manually reboot to unfreeze it ... A part from that great job Can't wait to see what you are going to bring next
And just one little request ... I love having the clock center on the status bar ... Do you think you can add it to the Evervolv project ? That's would be a great feature
Click to expand...
Click to collapse
install xposed + gravitybox. it works like a charm and has this feature and many others.
Sent from my Nexus 4 using Tapatalk
Okay, I am doing something wrong. I have downloaded the recovery multiple times from multiple devices. I have tried installing via TWRP and manually extracting the image to /boot.
Each attempt, I get:
Checking uImage... Invalid Size
BOOT FAILED!
Please SELECT to continue
Any thoughts? I can still load my backup copy of TWRP without issue.
Update:
After purging the other copies of TWRP from /boot, the new version loads without issue. Thanks flintman!
Discovered that the TP 4G not compatible with the test 3.X Kernel yet
Hey Flintman just wanted to point out my findings after going crazy over the past couple weeks trying to figure what I was doing wrong when flashing the test Kit Kat ROMs w/3.X kernel.
Previously my TP 4G was working fine on shumash's SCHIZOID 4.2.2 ROM but I was extremely eager to try out the new 3.X kernels. I first tried out your non-data/media Evervolv 4.0.0p1 version and was unable to connect to WiFi despite repeated clean install methods and variations of cache wipes. I know that I had re-sized partitions with Tailor sufficiently for Kit Kat as warned so I then attempted to try out Invisblek's CM11 ROM. Not only was WiFi still not wanting to toggle on, but the rotation sensor was acting oppositely for landscape orientations and I was getting frequent crashing reboots just going through the UI. I then decided to try out JCSullins' updated CM10.1 ROM with his 3.0 kernel and then encountered the same behavior as Invisblek's CM11 ROM, but with even worse random touch driver issues that resulted in erratic automatic screen touches and ultimately soft-reboots.
Restoring a backup to SCHIZOID's 4.2.2 ROM worked fine to restore all functionality, but I couldn't help but think that I was still doing something wrong.
I got a hold of a normal TP (WiFi only model) and tried your latest 1-10-2014 Evervolv 4.0.0p1 ROM and was amazed to see that it was working great including WiFi (although 5GHz APs don't seem to scan as reliably as the past kernel) aside from the known issues. I tried the exact same install process on my TP 4G again just to see if anything changed, but unfortunately WiFi still wouldn't toggle and the orientation sensor behavior exhibited the same opposite landscape behavior as Invisiblek and JCSullins' ROMs.
I had thought that aside from the 3G HSPA modem in the TP 4G model chipset-wise it would be identical to the WiFi-only model so kernel 3.X developments would be complimentary across all TP devices. Unfortunately this doesn't appear to be the case and I hope with time you guys are able to work out any compatibility with the 4G model to benefit from the already terrific development that's going on with the 3.X kernel now.
I admire your guys' skills and look forward to all the improvements in store!
PS: I'd be more than happy to beta test anything you guys feel would address any compatibility issues on the TP 4G!
If we flash your twrp will it remove cwm or add another entry? I've never been able to have two recoveries working. I would much rather not have to use the power button and what not all the time in cwm but want to make sure I'm covered if something goes wrong. Thanks
Sent from my TouchPad using Tapatalk
Due to the limit of the boot directory it will remove all recoveries before installing this one.
Sent from my SCH-I545 using xda app-developers app
Sorry for the Nube question I've searched and I'm sure it's been answered already....
So I got my touchpad with ClockworkMod Recovery version 6.0.1.9 can I flash the TWRP SE data/media recovery from there? Trying with the acme installer 5ET has failed.
I do have the original 4.4 Evervolv up and running and my partitions have been updated.
Thanks
Steve
SteveoSupremo said:
Sorry for the Nube question I've searched and I'm sure it's been answered already....
So I got my touchpad with ClockworkMod Recovery version 6.0.1.9 can I flash the TWRP SE data/media recovery from there? Trying with the acme installer 5ET has failed.
I do have the original 4.4 Evervolv up and running and my partitions have been updated.
Thanks
Steve
Click to expand...
Click to collapse
So I replaced the ulimage in the boot directory and was able to install the 1/10/14 rom. So I guess I needed to search and just try a little more.
anyway -- I think it's a little slower than the first 4.4 version.... Maybe I need to reboot.... thoughts?
steve
Both using same cpu settings? Although with more things implemented it could seem slower.
---------- Post added at 01:11 AM ---------- Previous post was at 01:07 AM ----------
emph4tic said:
Hey Flintman just wanted to point out my findings after going crazy over the past couple weeks trying to figure what I was doing wrong when flashing the test Kit Kat ROMs w/3.X kernel.
Previously my TP 4G was working fine on shumash's SCHIZOID 4.2.2 ROM but I was extremely eager to try out the new 3.X kernels. I first tried out your non-data/media Evervolv 4.0.0p1 version and was unable to connect to WiFi despite repeated clean install methods and variations of cache wipes. I know that I had re-sized partitions with Tailor sufficiently for Kit Kat as warned so I then attempted to try out Invisblek's CM11 ROM. Not only was WiFi still not wanting to toggle on, but the rotation sensor was acting oppositely for landscape orientations and I was getting frequent crashing reboots just going through the UI. I then decided to try out JCSullins' updated CM10.1 ROM with his 3.0 kernel and then encountered the same behavior as Invisblek's CM11 ROM, but with even worse random touch driver issues that resulted in erratic automatic screen touches and ultimately soft-reboots.
Restoring a backup to SCHIZOID's 4.2.2 ROM worked fine to restore all functionality, but I couldn't help but think that I was still doing something wrong.
I got a hold of a normal TP (WiFi only model) and tried your latest 1-10-2014 Evervolv 4.0.0p1 ROM and was amazed to see that it was working great including WiFi (although 5GHz APs don't seem to scan as reliably as the past kernel) aside from the known issues. I tried the exact same install process on my TP 4G again just to see if anything changed, but unfortunately WiFi still wouldn't toggle and the orientation sensor behavior exhibited the same opposite landscape behavior as Invisiblek and JCSullins' ROMs.
I had thought that aside from the 3G HSPA modem in the TP 4G model chipset-wise it would be identical to the WiFi-only model so kernel 3.X developments would be complimentary across all TP devices. Unfortunately this doesn't appear to be the case and I hope with time you guys are able to work out any compatibility with the 4G model to benefit from the already terrific development that's going on with the 3.X kernel now.
I admire your guys' skills and look forward to all the improvements in store!
PS: I'd be more than happy to beta test anything you guys feel would address any compatibility issues on the TP 4G!
Click to expand...
Click to collapse
I am curious. Have you tried turning the 4g off. Like airplane mode then just turning wifi back on? Was thinking of getting one of these models to tinker with.
Moody66 said:
Both using same cpu settings? Although with more things implemented it could seem slower.
---------- Post added at 01:11 AM ---------- Previous post was at 01:07 AM ----------
Click to expand...
Click to collapse
I think it was because of sync.... it's running smooth now. after I loaded a different set of GAPPS.
Now I have to figure out the camera apk. it would help if I RTFM.... Thanks Flintman for the awesome update!
Which version of gapps is recommended for 01-10-14 version?
New Test build up which fixes vibration
emph4tic said:
Hey Flintman just wanted to point out my findings after going crazy over the past couple weeks trying to figure what I was doing wrong when flashing the test Kit Kat ROMs w/3.X kernel.
Previously my TP 4G was working fine on shumash's SCHIZOID 4.2.2 ROM but I was extremely eager to try out the new 3.X kernels. I first tried out your non-data/media Evervolv 4.0.0p1 version and was unable to connect to WiFi despite repeated clean install methods and variations of cache wipes. I know that I had re-sized partitions with Tailor sufficiently for Kit Kat as warned so I then attempted to try out Invisblek's CM11 ROM. Not only was WiFi still not wanting to toggle on, but the rotation sensor was acting oppositely for landscape orientations and I was getting frequent crashing reboots just going through the UI. I then decided to try out JCSullins' updated CM10.1 ROM with his 3.0 kernel and then encountered the same behavior as Invisblek's CM11 ROM, but with even worse random touch driver issues that resulted in erratic automatic screen touches and ultimately soft-reboots.
Restoring a backup to SCHIZOID's 4.2.2 ROM worked fine to restore all functionality, but I couldn't help but think that I was still doing something wrong.
I got a hold of a normal TP (WiFi only model) and tried your latest 1-10-2014 Evervolv 4.0.0p1 ROM and was amazed to see that it was working great including WiFi (although 5GHz APs don't seem to scan as reliably as the past kernel) aside from the known issues. I tried the exact same install process on my TP 4G again just to see if anything changed, but unfortunately WiFi still wouldn't toggle and the orientation sensor behavior exhibited the same opposite landscape behavior as Invisiblek and JCSullins' ROMs.
I had thought that aside from the 3G HSPA modem in the TP 4G model chipset-wise it would be identical to the WiFi-only model so kernel 3.X developments would be complimentary across all TP devices. Unfortunately this doesn't appear to be the case and I hope with time you guys are able to work out any compatibility with the 4G model to benefit from the already terrific development that's going on with the 3.X kernel now.
I admire your guys' skills and look forward to all the improvements in store!
PS: I'd be more than happy to beta test anything you guys feel would address any compatibility issues on the TP 4G!
Click to expand...
Click to collapse
Do you think you can get me some dmesg and logcats??

No longer needed (Admin pls. close)

No longer needed... Visit official thread by @LuK1337 : http://forum.xda-developers.com/moto-g-lte/orig-development/rom-cyanogenmod-13-0-t3245547
Please admin close this thread. Thank you.
No longer needed... Visit official thread by @LuK1337 : http://forum.xda-developers.com/moto-g-lte/orig-development/rom-cyanogenmod-13-0-t3245547
RIL is not working
Cameo164 said:
When you try it please tell if it works for you. And sorry that's my first thread .
Click to expand...
Click to collapse
I know you just sharing for the hype, but, at least on XT1078 (dual sim) RIL is not working, the system did not recognize a SIM card in any slot, don't know if it's because the dual sim stuff... The rest seems to behave just like you mentioned, so thanks for sharing anyway!!
Edit: By the way, I managed to install without Titan's Recovery... To be honest, when I tried to boot in titan's recovery my phone kind of bootlooped... So I decided to modify updater-script and change the match names to thea (XT1078), it installed flawless and booted just fine.
Okay that's sad to hear but I can't do much at the moment. But thank you for trying.
EDIT: Multi sim fixed in 07.11 build.
Where is the original thread ? I can't find it. You should give a link in the first post as it is not your ROM but thanks for sharing !
Mavireck said:
Where is the original thread ? I can't find it. You should give a link in the first post as it is not your ROM but thanks for sharing !
Click to expand...
Click to collapse
That's the problem. I can't find it too. I got the download link from the Moto WhatsApp Group.
EDIT: I found it. I will update the post.
I saw cyanogenmod so my post does relate to this thread...
so basically i unlocked my bootloader on my Moto G 2014 LTE, I rooted my phone and then installed and flashed using TWRP:
tk_gapps-stock-5.1.1-20151004-signed.zip
Full-CM-12-21-03-15-Bacon-modem-flashable.zip
Both successfully installed and flashed and then I rebooted the system as per the instructions and then my phone screen, instead of rebooting with cyanogen, it went black and wont turn on.
Please could someone tell me what I need to do to get it up an running, I have tried the following:
- holding down power and volume down button for two minutes whilst on charge
- leaving it on charge for 15 minutes and then repeating the above step
- I have plugged it into my computer and it has picked up that there is something plugged in, but my phone drive never shows up.
Thank you
why new thread if it is work of luk and luca?
mayurim said:
I saw cyanogenmod so my post does relate to this thread...
so basically i unlocked my bootloader on my Moto G 2014 LTE, I rooted my phone and then installed and flashed using TWRP:
tk_gapps-stock-5.1.1-20151004-signed.zip
Full-CM-12-21-03-15-Bacon-modem-flashable.zip
Both successfully installed and flashed and then I rebooted the system as per the instructions and then my phone screen, instead of rebooting with cyanogen, it went black and wont turn on.
Please could someone tell me what I need to do to get it up an running, I have tried the following:
- holding down power and volume down button for two minutes whilst on charge
- leaving it on charge for 15 minutes and then repeating the above step
- I have plugged it into my computer and it has picked up that there is something plugged in, but my phone drive never shows up.
Thank you
Click to expand...
Click to collapse
Use this guide: https://wiki.cyanogenmod.org/w/Install_CM_for_thea
RolanDroid said:
why new thread if it is work of luk and luca ?
Click to expand...
Click to collapse
Because I found it in the comments from the CM12.1 Builds for our devices and I thought I could share their great work and show the other people what they already did because there is no official thread at the moment. And I wrote in my first post that it's their work.
Anyone tested this on XT1069 Titan?
Ace2213 said:
Anyone tested this on XT1069 Titan?
Click to expand...
Click to collapse
For titan it would be this file : https://s.basketbuild.com/filedl/de...M13/titan/cm-13-20151021-UNOFFICIAL-titan.zip
But because XT1069 is a dual sim phone RIL (Calls, SMS, Data) will not work. So I wouldn't recommend you to install it. I'm sure it will be fixed soon.
I use it as a tablet, so I don't mind lack of dual Sim support
---------- Post added at 02:29 AM ---------- Previous post was at 02:21 AM ----------
Does everything else work though?
Ace2213 said:
I use it as a tablet, so I don't mind lack of dual Sim support
---------- Post added at 02:29 AM ---------- Previous post was at 02:21 AM ----------
Does everything else work though?
Click to expand...
Click to collapse
Everything works except the things in What's not working in Post 1. The biggest bugs at the moment are that you can't select an other language than english and that Screenrotation is sometimes buggy and you have to restart the phone to get it working again.
I only use English so that's not an issue. I had the screen rotate bug in "stable" roms on two phones. Does it affect games and movies (auto rotated apps) or only switching rotation on and off?
Ace2213 said:
I only use English so that's not an issue. I had the screen rotate bug in "stable" roms on two phones. Does it affect games and movies (auto rotated apps) or only switching rotation on and off?
Click to expand...
Click to collapse
No it doesn't affect games and apps with only one orientation available. But I had to download an app called "rotation control" to rotate my screen when I'm in apps for example browser or apps.
How is this CyanogenMod? This is AOSP with the CM launcher and wallpaper, that's it. And what are these weird search and browser apps?
This isn't CyanogenMod. There is not even advanced reboot menu. This is 100% stock. And no xposed of course. I'm going back to RR.
Ace2213 said:
How is this CyanogenMod? This is AOSP with the CM launcher and wallpaper, that's it. And what are these weird search and browser apps?
This isn't CyanogenMod. There is not even advanced reboot menu. This is 100% stock. And no xposed of course. I'm going back to RR.
Click to expand...
Click to collapse
It is cyanogenmod, early version of it to be exact. They just didn't merge their things yet.
Ace2213 said:
How is this CyanogenMod? This is AOSP with the CM launcher and wallpaper, that's it. And what are these weird search and browser apps?
This isn't CyanogenMod. There is not even advanced reboot menu. This is 100% stock. And no xposed of course. I'm going back to RR.
Click to expand...
Click to collapse
This is only for testing and development purposes my friend, it is not even a nightly!
It is just an early build and a really good one!
My bad. It is a great build. The only issue is gapps. All the ones I found for 6.0 keep FCing randomly and having permissions issues, even when all permissions are allowed
I had the same problem Ace2213, so I've reverted back to 12.1 for now and wait for a proper Nightly of 13.

[announcement] SailfishOS for the m7 (GSM variant)

\o/ yey thanks to the moderator for letting me post links!
[update 25th February: modem now semi-working! Here's a pic ]
Hi all,
I'm excited to announce the availability of the inaugural release of SailfishOS for the M7 (GSM variant).
Instructions, information and download links are available here.
The adaptation is very much a work in progress: modem and camera not yet functional being the largest of the issues but we're actively working on them and hope to have functionality in place in the coming weeks. Regarding the US variants, the Sprint version has been successfully tested but public images for this adaptation are not yet available. There is an outside chance the 'vanilla' M7 SailfishOS image will function when paired with the appropriate Cyanogenmod 11.0 release but I wouldn't necessarily recommend it and don't have a device/am in the wrong continent to test.
So if you have an M7 kicking around that you don't use as your daily or are keen to see what is going on beyond the world of Android please take this for a spin. Who knows, you might even like it.
We chat about all* of our hardware adaptations on FreeNode in the #sailfishos-porters channel if you want to drop by.
Cheers,
Steph ([email protected], @chucisteph)
* if you're interested in other devices we're currently working on over 35 hardware adaptations and are actively engaging communities for more.
I wanna try sailfish OS
chucisteph said:
Hi all,
(links all disabled as I'm a new user. Could a moderator please PM me)
I'm excited to announce the availability of the inaugural release of SailfishOS for the M7 (GSM variant).
Instructions, information and download links are available here.
The adaptation is very much a work in progress: modem and camera not yet functional being the largest of the issues but we're actively working on them and hope to have functionality in place in the coming weeks. Regarding the US variants, the Sprint version has been successfully tested but public images for this adaptation are not yet available. There is an outside chance the 'vanilla' M7 SailfishOS image will function when paired with the appropriate Cyanogenmod 11.0 release but I wouldn't necessarily recommend it and don't have a device/am in the wrong continent to test.
So if you have an M7 kicking around that you don't use as your daily or are keen to see what is going on beyond the world of Android please take this for a spin. Who knows, you might even like it..
We chat about all* of our hardware adaptations on FreeNode in the #sailfishos-porters channel if you want to drop by.
Cheers,
Steph (FreeNode: stephg Twitter: @chucisteph)
* if you're interested in other devices we're currently working onover 35 hardware adaptations and are actively engaging communities for more. Please stop by #sailfishos-porters if you're interested.
Click to expand...
Click to collapse
I wanna try this sailfish rom. Can you send me a link on MP.
thanks
Wow, wasn't expecting that! I also want to try the ROM please . Thanks in advance
HerrNieschnell said:
Wow, wasn't expecting that! I also want to try the ROM please . Thanks in advance
Click to expand...
Click to collapse
Could a mod *pretty please* let me post links? (or post them for me, or another user post them, don't mind, I just want to share the info)
Never mind. Found it myself: https://wiki.merproject.org/wiki/Adaptations/libhybris/Install_SailfishOS_for_m7
Could you say how long it will be till we can expect a ROM with gsm working or are there problems you can't say how long it will take to solve them?
HerrNieschnell said:
Never mind. Found it myself
Could you say how long it will be till we could expect a ROM with gsm working?
Click to expand...
Click to collapse
Days hopefully but probably weeks. The modem is there and detected but I'm having difficulty turning it on. Once that's solved it should (hopefully!) Just Work(tm).
I am installing this rom on my HTC m7. Thank you so much. Will love to assist you people in any way possible.
Update:
Everything works perfectly except, GSM, camera and store. Have played with it for around half an hour. There is another bug with power off menu. It got stucked when i tried to do so forcing me to soft reset my mobile. And i tried adding my sim card and after the reboot it get stucked in boot loop.
Hoping to see fully working SFOS in nearest future.
I wanna try this sailfish rom. Can you send me a link please
HerrNieschnell said:
Never mind. Found it myself: https://wiki.merproject.org/wiki/Adaptations/libhybris/Install_SailfishOS_for_m7
Could you say how long it will be till we can expect a ROM with gsm working or are there problems you can't say how long it will take to solve them?
Click to expand...
Click to collapse
Touch screen not work my device :crying:
Hi all!
Happy to say that I have managed to get some modem support working this afternoon. I'll do my best to bake an image tonight. Where we're at at the moment:
* Modem functional but currently not showing SIM status correctly in UI
* SMS sending and receiving works
* Mobile data works (and shows correctly in the UI
* Call functionality works: can make and receive calls, however call audio not currently working
These are all problems that other devices have had in the past, and they all have solutions so I am going to work as quickly as I can to get them resolved and make an image in with fixes.
marslan81 said:
Touch screen not work my device :crying:
Click to expand...
Click to collapse
Sorry to hear. Your device is definitely a GSM m7? could you try re-flashing and see if it persists? if it does, are you happy using linux tools? we can debug it together.
utsavkoju said:
I am installing this rom on my HTC m7. Thank you so much. Will love to assist you people in any way possible.
Update:
Everything works perfectly except, GSM, camera and store. Have played with it for around half an hour. There is another bug with power off menu. It got stucked when i tried to do so forcing me to soft reset my mobile. And i tried adding my sim card and after the reboot it get stucked in boot loop.
Hoping to see fully working SFOS in nearest future.
Click to expand...
Click to collapse
That's great to hear. Once I have the modem properly working I will need help both for testing but also to enable store support (I need to send two IMEIs to Jolla so they can verify that the port works properly. Regarding your boot loop, the SIM should make no difference but I have noticed that the boot can sometimes be upset if the phone is started whilst plugged into a computer:- the GUI sometimes never comes up. I'm working on that but it only happens to me maybe 1 in 10 times so it's low down my list of priorities.
chucisteph said:
Sorry to hear. Your device is definitely a GSM m7? could you try re-flashing and see if it persists? if it does, are you happy using linux tools? we can debug it together.
That's great to hear. Once I have the modem properly working I will need help both for testing but also to enable store support (I need to send two IMEIs to Jolla so they can verify that the port works properly. Regarding your boot loop, the SIM should make no difference but I have noticed that the boot can sometimes be upset if the phone is started whilst plugged into a computer:- the GUI sometimes never comes up. I'm working on that but it only happens to me maybe 1 in 10 times so it's low down my list of priorities.
Click to expand...
Click to collapse
Yes my device HTC ONE M7_UL, TR devices, Unlocked, Super Cid, S-Off, TWRP 3.0 and Firmware 7.19.401.51 Hboot 1.61.0000
do not have touch the language selection screen.
marslan81 said:
Yes my device HTC ONE M7_UL, TR devices, Unlocked, Super Cid, S-Off, TWRP 3.0 and Firmware 7.19.401.51 Hboot 1.61.0000
do not have touch the language selection screen.
Click to expand...
Click to collapse
What kind of computer do you use? Windows/Mac/Linux?
chucisteph said:
What kind of computer do you use? Windows/Mac/Linux?
Click to expand...
Click to collapse
Windows 10 fastboot driver ok
marslan81 said:
Windows 10 fastboot driver ok
Click to expand...
Click to collapse
ok so sailfish is a fully blown linux distribution, means that once it's booted, even if the gui is messed up you can still SSH into it and ask it what it's doing (similar to adb shell). I just need to go RTFM how to make Windows recognise the USB network that your phone is presenting when you plug it in.
marslan81 said:
Windows 10 fastboot driver ok
Click to expand...
Click to collapse
Did you try the re-flash by the way?
chucisteph said:
Did you try the re-flash by the way?
Click to expand...
Click to collapse
Thanks for your help.
I tried 3 times,
I'm doing the setup with the following steps
1- Full wipe
2- İnstal "cm-11-20141112-SNAPSHOT-M12-m7"
3- Shutdown and Powered up again by launching android
4- Reboot Recovery and instal "sailfishos-m7-release-2.0.0.10-sg-rel-201602180750.zip", and reboot again
5-Normaly boot but touch does not work in the language of choice
Sorry for my bad english
marslan81 said:
Thanks for your help.
I tried 3 times,
I'm doing the setup with the following steps
1- Full wipe
2- İnstal "cm-11-20141112-SNAPSHOT-M12-m7"
3- Shutdown and Powered up again by launching android
4- Reboot Recovery and instal "sailfishos-m7-release-2.0.0.10-sg-rel-201602180750.zip", and reboot again
5-Normaly boot but touch does not work in the language of choice
Sorry for my bad english
Click to expand...
Click to collapse
Your English is fine!
ok so your steps 1) and 2) only need to be done once:- Sailfish relies on the CM version for hardware support but once CM has been installed, when you install the SFOS zip it goes next to the CM /system and /data.
4) You're using an older SFOS image: does this one work: http://images.devaamo.fi/sfe/m7/sfe...s-m7-release-2.0.0.10-sg-rel-201602191147.zip
Out of interest, in step 3, does touch work?
No am sorry
Perhaps in a different firmware version required, because the power button works. Maybe that's enough for tonight I'll try again tomorrow. Thank you, good night
chucisteph said:
* Modem functional but currently not showing SIM status correctly in UI
* SMS sending and receiving works
* Mobile data works (and shows correctly in the UI
* Call functionality works: can make and receive calls, however call audio not currently working
Click to expand...
Click to collapse
Thanks for all your hard work. I am really impatient for your next release. These fixes are really important and one m7 will be my daily driver for next few months .
chucisteph said:
Once I have the modem properly working I will need help both for testing but also to enable store support (I need to send two IMEIs to Jolla so they can verify that the port works properly.
Click to expand...
Click to collapse
Count me In.
chucisteph said:
Regarding your boot loop, the SIM should make no difference but I have noticed that the boot can sometimes be upset if the phone is started whilst plugged into a computer:- the GUI sometimes never comes up. I'm working on that but it only happens to me maybe 1 in 10 times so it's low down my list of priorities.
Click to expand...
Click to collapse
I did a quick reflash and its working perfectly now.

Will Lineage OS make my Device compatible with the ps3 Sixaxis controller app?

Hey there,
am trying to get the sixaxis app to work with my p9 lite now, but the applications lists my devices as "incompatible" as it can't get the device's Bluetooth driver configured properly. I read somewhere that the required packages to access this driver is not available on the stock rom but it is available in Cyanogen mod/ lineage OS . if someone can confirm this, it would be a great help, cause i don't want to go through the hassle of installing everything back just to find that the device is still incompatible anyways...
PS: as a proof on concept, i have a galaxy grand prime with Cyanogen mod already running on it, the app worked fine and the controller paired there, but still maybe the device was compatible anyway even without Cyanogen mod on.
It will work.-don't forget to give me a thanks!
Exiatron00 said:
It will work.-don't forget to give me a thanks!
Click to expand...
Click to collapse
well, thanks for the answer
i will be much happier when I actually flash it and it works though, right now I'm taking your word for it

Categories

Resources