Hello,
I have a Samsung Galaxy S5 with a broken LCD screen and i want to be able to control it via my computer and Samsung SideSync, the problem is i didnt have it installed on the phone before the LCD broke.
I tried my best and managed to install it on the phone via my google account on the phone (you can ask to push an app installation through the website) but i cant get to unlock the phone and launch the app cause the touchscreen might not work anymore.
I dont want to repair the phone screen but i want to be able to play games on it as i am streaming them on twitch.
So, last solutions are : buying a mhl cable and watch the screen, plug a usb mouse via OTG and blindly try to make the code, then watch the screen again over mhl and so on... until i can launch sidesync.
Or i might be able to flash a rom via odin which skips the installations basics and already got sidesync installed but, i dont know how to find one.
It might help but i do have another samsung galaxy s5 fully working.
I know how to do a full backup via the custom recovery installed on it, i know how to restore it on the other phone via the recovery ( but dead screen ) but i don't know how to restore the backup from that phone to the other one via odin.
And i don't even know if it would work ?
A little help would be appreciated.
Thanks alot ! Cheers
BUMP, i know there a solution less expensive than 200$ but can't figure it out myself.
Hello everybody,
I bought the SCISHION V88 Piano TV Box - RK3328 4GB RAM + 16GB ROM Android 7.1, and I made the mistake (without knowing the results) to install the SuperSU app from google play (the box is rooted, but do not ever install the SuperSU).
The result is that after rebooting my box (asked by the SuperSU app), it stucks on the Android Logo but factory recovery is still accessible when pressing the reset button.
I managed to do a factory reset via factory recovery without success, still stuck on boot on the Android Logo.
I managed to fix it by installing the firmware uploaded by changonc in freaktab.com.
You can find the firmware from his post.
http://freaktab.com/forum/tv-player-support/rockchip-based-tv-players/rk3328-devices/681869-scishion-v88-piano-tv-box-rk3328-4gb-ram-16gb-rom-android-7-1-usb-3-0-fast-lan?p=705933#post705933
The tools that I have used are RockChip_Batch_Tool_v1.8 and DriverAssitant_v4.4 in windows 10 x64.
I installed the DriverAssistant_v4.4
Then executed the RockChip_Batch_Tool_v1.8
Loaded the firmware bin file downloaded from changonc's post
rk3328_7.1_box_RX4_SSV6051P_tongwang_RKMC-update_20171228.bin
Then connected the box with a usb cable Male A to Male A, on the box's usb port which is located close to the piano keys (it is the one on the edge and not the blue)
The moment that it connects with the usb it switches on.
Immediately I pressed the reset button and keep it pressed until the box 1 in RockChip Batch Tool turned yellow.
Then I pressed the upgrade button.
The procedure started, and the first time it ended with an error.
Then I repeated the same procedure and it finished successfully.
After* I disconnected it and connected it to the TV, and it started loading.
Be very patient when on the Android boot logo, it can take about 10-15 mins to load the android the first time.
hi, thanks for the writeup. After installing this new firmware, what is the 'Android Patch Level' and kernel build date? You can find it from settings->About Phone
http://www.scishiontvbox.com/firmware-for-scishion-v88-piano-tv-box shows that there is a updated firmware available, but there is no link provided to download it.
Thank you. Today i followed the steps you have given above and updated my v88 piano tv box.
This scishion v88 piano tv box is a wonderful device with 4G RAM, but the stock ROM running this box is not great. They have removed some essential components and it is impossible to get an alternate launcher or other components to work on this.
i wonder if there is a custom android ROM for this device.
V88 piano problem
Hello,
I found a problem with my V88 Piano. When I power off by remote control (not removing the power suply) When I make power on, the box not found the LAN
If I unplug the power supply e re start the box, all runs OK
Some one have an idea?
Thanks and sorry my english!
Best regards
Daniel
I have an Android TV and I wanted to disable its launcher. Because I wanted to install my own launcher !
So I connected to it via ADB and made some changes.
Then the TV software crashed and when I restart the TV, I just see the first welcome screen of TV and nothing happens after that.
I think I need to factory reset the TV and I have nothing to do that.
My TV brand is UNEVA.
Does any body know nothing about that ?
BR
On my fire tv edition I had to hold the power button a few second with the tv turned off and a few second after the logo starts up. The physical power button on the tv. You can try on the remote too, the same way. This is how you get to tv recovery on a fire tv edition.
Actually I didn't understand what to do !
Could you please write the steps again by detail ?
thank you
Do you have an android tv or a smart tv? Is it a streaming device or the tv itself is not working? Turn off tv, hold down power button while you plug the tv back on and wait for a start up screen then the recovery screen.
Yes I have and Android TV.
It was working correctly , but after some changes in firmware files using ADB, it has been stuck in startup screen.
Because of that I needed to go into recovery mode.
I followed up your instructions, but nothing happened.
My TV brand is UNEVA. It is a Chinese brand and it is not famous at all.
But its firmware name is "Wisdom Share" which is a bit famous.
faarraisd said:
Yes I have and Android TV.
It was working correctly , but after some changes in firmware files using ADB, it has been stuck in startup screen.
Because of that I needed to go into recovery mode.
I followed up your instructions, but nothing happened.
My TV brand is UNEVA. It is a Chinese brand and it is not famous at all.
But its firmware name is "Wisdom Share" which is a bit famous.
Click to expand...
Click to collapse
You should be able to find the stock images for the current Android operating system on Google's website and then you can just reflash those
Your uneva brand Tv is an Android tv, and I assumed you connect to adb remotely. Can you check if you can still connect to adb? If you are messing with adb then you should know recovery mode, you need to get into recovery to factory reset.
Yes UNEVA is an Android TV and I used to connect to it using adb , but after making some changes in OS files (in shell mode) , the TV damaged and now I just can ping the TV and can not connect to it using adb.
So finally I think I need to get into factory reset mode.
But the problem is that I don't know where is factory reset page?
watch this video, it is how i factory reset my tv when i couldnt get pass the tv logo. www.youtube.com/watch?v=g-kdQjSE__A
I watch the video.
I did this bust it didn't work and my TV does not turn ON !
It means that my TV is different from the Toshiba model in YouTube video
every brand of tv have their own hard factory reset buttons to press when you cannot access the software of the tv. you have a tv i have never heard of maybe you can get a hold of pdf of your tv instructions. Good luck.
Unfortunately I could not find its Guide Book. It is almost a no-name Chinese brand and because of that, I thought maybe I can find a way using the TV's android software (Wisdom Share)
But anyway, thank you for your help.
I still have to search for a way and would be thankful if anyone can help.
I am trying to recover the data from a fire tab 10 an thought the fire toolbox might be of help. I cannot do any touch screen input and when I plug it into my PC I cannot get a read but I can't afirm any connection from the tablet . so nada. where can I download toolbox. And do you think it would help? I've used TBox in the past to move files to and from this same tablet in the past.
Hi everyone, so it seems i have hard bricked my shield from trying to load a file called ShieldRoot, when i loaded the file from fastboot i came back to a black screen but the shield was still on green light, now the thing doesnt want to turn on anymore even the computer doesnt read the shield anymore, i've tried all the methods that ive searched for. the only thing that i havent tried is the Keyboard method but i dont think that will work. any help will do!
Model P2571