hello
i have 2 Q
i,m doing softwares and i see many time this problem (when i flashed n9005z firmware it will every time fail in modem cachy setion) after that i,ll out it with octoplus box but in *#06# it,ll showing just 2 files AP and CP not have CSC ,. so i want to know that which firmware is suiteable for hongkong bords ? i flashed with this firmware (N9005ZHUENH4)
and 2nd problem is that now i have 9005z and it,ll showing no servies and emergency call i,ll wipe security and write cert but problem still remain
Platform: Samsung Android
Selected port: COM23
Selected model: SM-N9005
Please, press "OK" button on the phone to allow USB debugging..
Detected phone model: SM-N9005
Firmware compiled date: Thu Dec 24 11:51:53 KST 2015
PDA version: N9005ZSUGOL1
CSC version: unknown
SW version: N9005ZHUENH4
Phone SN: RV1D956TFKR
Android version: 5.0 (LRX21V)
Sales code: unknown
Country: unknown
HW platform: msm8974
HW Chip: MSM8974
HW Modem: MSM8974
Codename: hltezh
Updating DIAG confing...
DIAG confing is succesfully enabled.
Performed by 2.3.2 software version
What model is shown in download mode? Is it the 9005z or 9005?
audit13 said:
What model is shown in download mode? Is it the 9005z or 9005?
Click to expand...
Click to collapse
brother in DL mode just n9005 but i,m talking about in *#1234# n9005zxjhsd etc etc
and every Z version faild during flashing in last
Why not flash a CSC and a Modem .
audit13 said:
What model is shown in download mode? Is it the 9005z or 9005?
Click to expand...
Click to collapse
JJEgan said:
Why not flash a CSC and a Modem .
Click to expand...
Click to collapse
you mean why i not try with AP .CP and CSC? if yes ,..so i tried but sam problem
No i said why not flash a modem and a CSC .
See the stickied FAQS and Guides and the Modem/ Basband thread .
JJEgan said:
No i said why not flash a modem and a CSC .
See the stickied FAQS and Guides and the Modem/ Basband thread .
Click to expand...
Click to collapse
i flashed with modem but problem still .
and not i have again one problem in n900 in baseband unkonw and imei nulll and CP is not showing ...
mean modem damage again
restore your backed up EFS
JJEgan said:
No i said why not flash a modem and a CSC .
See the stickied FAQS and Guides and the Modem/ Basband thread .
Click to expand...
Click to collapse
JJEgan said:
restore your backed up EFS
Click to expand...
Click to collapse
that,s a major fault i have not backup..
bro you have skype etc contact?
Related
i bought n9005 with 4.3, then i flashed 4.4.2 on it, now IMEI unknown, NULL/NULL, Baseband UNKNOWN,
Please help me,
I have tried MODEM Change solution but not work for me
asif.malick said:
i bought n9005 with 4.3, then i flashed 4.4.2 on it, now IMEI unknown, NULL/NULL, Baseband UNKNOWN,
Please help me,
I have tried MODEM Change solution but not work for me
Click to expand...
Click to collapse
Did you flash the firmware that was incompatible with your device?
You didn't tell what is your original CSC and what is the CSC you are using to flash?
Try to reflash the stock firmware for your device.
Use Phone INFO ★Samsung★ app to know your CSC, and also to obtain the stock firmware for your device (Menu > 'Firmware Browser').
IMEI / Baseband null
vndnguyen said:
Did you flash the firmware that was incompatible with your device?
You didn't tell what is your original CSC and what is the CSC you are using to flash?
Try to reflash the stock firmware for your device.
Use Phone INFO ★Samsung★ app to know your CSC, and also to obtain the stock firmware for your device (Menu > 'Firmware Browser').
Click to expand...
Click to collapse
Yes firmware was OK, mk2 was old one on 4.3 with baseband mj9, right now after 4.4.2 MY CSC is ZZHENE3, what wil be the region for Pakistan,
asif.malick said:
Yes firmware was OK, mk2 was old one on 4.3 with baseband mj9, right now after 4.4.2 MY CSC is ZZHENE3, what wil be the region for Pakistan,
Click to expand...
Click to collapse
ZZH mean TGY, it is the CSC for Hong Kong firmware. This firmware is NOT compatible with all other version of Note 3.
If you don't know what is your original CSC, you can post all screenshots from the app, and we will try to guess it.
IMEI / Baseband null
vndnguyen said:
ZZH mean TGY, it is the CSC for Hong Kong firmware. This firmware is NOT compatible with all other version of Note 3.
If you don't know what is your original CSC, you can post all screenshots from the app, and we will try to guess it.
Click to expand...
Click to collapse
model: 9005
device type: hlte
product nam: hltezh
original csc code: xsi
firmware csc code: tgy
active csc code: tgy
csc country: HK
product code: NULL
IMEI: null
bootloader version: n900zhuene3
csc version: zzhene3
baseband version: null
asif.malick said:
model: 9005
device type: hlte
product nam: hltezh
original csc code: xsi
firmware csc code: tgy
active csc code: tgy
csc country: HK
product code: NULL
IMEI: null
bootloader version: n900zhuene3
csc version: zzhene3
baseband version: null
Click to expand...
Click to collapse
Can you capture all screenshots and post them here please? I need all screenshots for more detailed info.
IMEI / Baseband null
vndnguyen said:
Can you capture all screenshots and post them here please? I need all screenshots for more detailed info.
Click to expand...
Click to collapse
uploaded. please check
asif.malick said:
i bought n9005 with 4.3, then i flashed 4.4.2 on it, now IMEI unknown, NULL/NULL, Baseband UNKNOWN,
Please help me,
I have tried MODEM Change solution but not work for me
Click to expand...
Click to collapse
Hello, had same problem, as well and managed to fix it. Did you solve this?
To solve IMEI NULL (assume using stock ROM):
1. Download the modem from here: http://forum.xda-developers.com/showthread.php?t=2475714
2. Go to download mode
3. Open ODIN and flash the modem only.
asif.malick said:
uploaded. please check
Click to expand...
Click to collapse
OK, your device is international Note 3 and you have flashed firmware for Note 3 Hong Kong. These firmwares are not compatible to each other, so it did brick your device.
Your original CSC is XSI (United Arab Emirates)
Try to download stock firmware for XSI and reflash it using Odin or Kies.
To obtain download link, open 'Phone INFO ★Samsung★' app > Menu > 'Firmware Browser', enter XSI in the CSC textbox, press Go button to search and select the firmware to download.
Gud luck.
I went on this link
http://forum.xda-developers.com/galaxy-note-3/general/ref-galaxy-note-3-sm-n9005-gsm-modems-t2842806
and downloaded NG1 modem, that did the trick for me.
Hi, I have a question about update lollipop via OTA.
I have the international version of the note 4, the sm n910h without logos. I just unroot the phone and when I try to update via OTA to lollipop it says i have the lasted version , but I have 4.4.4 kk.
The question is I cant update via OTA if i have unroot my phone?
Thanks and Im sorry for my bad English.
variel30 said:
Hi, I have a question about update lollipop via OTA.
I have the international version of the note 4, the sm n910h without logos. I just unroot the phone and when I try to update via OTA to lollipop it says i have the lasted version , but I have 4.4.4 kk.
The question is I cant update via OTA if i have unroot my phone?
Thanks and Im sorry for my bad English.
Click to expand...
Click to collapse
No You Can't Get OTA update Even you Unroot...But If you Have Still Stock Recovery than You can Update your Mobile VIA Samsung KIES by Unrooting...
TechLife said:
No You Can't Get OTA update Even you Unroot...But If you Have Still Stock Recovery than You can Update your Mobile VIA Samsung KIES by Unrooting...
Click to expand...
Click to collapse
HI, I do have the stock recovery and I try with kies but nothing happened.
variel30 said:
HI, I do have the stock recovery and I try with kies but nothing happened.
Click to expand...
Click to collapse
Than You Have To manually Update Your Mobile By Flashing The Lollipop FirmWare in ODIN...Follow Below Instructions
Download Phone INFO ★Samsung★ To Check Origin of Your Mobile's Country & CSC
After Checking The CSC & Origin Download Lollipop 5.0.1 For SM-N910H Related To Your CSC & Country Origin From Sammobile Firmware
Download Odin3 v3.10.6
Flashing Guide
Backup Your All Data
Make Sure The Drivers Of Your Note 4 Installed On Your PC ( As You Said You Tried with KIES So Drivers are I think Installed But Make Sure )
Do Factory Reset By Going into Recovery Mode (Volume UP + Home + Power Button Simultaneously )
Power OFF The Mobile
Go into Download Mode ( Volume Down + Home+ Power Button Simultaneously )
Run ODIN AS Administrator on Your PC & Attach Your Mobile With PC
In ODIN ID:COM BOX will Show Bluish Color (It means Drivers are Installed for your Device)
Extract The Zip File Downloaded From Sammobile,It'll Extract To .tar.md5 File Extension
In ODIN Click on AP To Browse The Extracted Frimware
Click on Start in ODIn ...Flashing Will Be Start ,Take Some Time To Complete
When ODIN Say Remove The Device Remove It or It'll Automatically Restart the Device
Just Check Auto Reboot & F.Reset.Time Option in ODIn , Leave All Other Options As It is
I Hope It'll Solve Your Issue
TechLife said:
Than You Have To manually Update Your Mobile By Flashing The Lollipop FirmWare in ODIN...Follow Below Instructions
Download Phone INFO ★Samsung★ To Check Origin of Your Mobile's Country & CSC
After Checking The CSC & Origin Download Lollipop 5.0.1 For SM-N910H Related To Your CSC & Country Origin From Sammobile Firmware
Download Odin3 v3.10.6
Flashing Guide
Backup Your All Data
Make Sure The Drivers Of Your Note 4 Installed On Your PC ( As You Said You Tried with KIES So Drivers are I think Installed But Make Sure )
Do Factory Reset By Going into Recovery Mode (Volume UP + Home + Power Button Simultaneously )
Power OFF The Mobile
Go into Download Mode ( Volume Down + Home+ Power Button Simultaneously )
Run ODIN AS Administrator on Your PC & Attach Your Mobile With PC
In ODIN ID:COM BOX will Show Bluish Color (It means Drivers are Installed for your Device)
Extract The Zip File Downloaded From Sammobile,It'll Extract To .tar.md5 File Extension
In ODIN Click on AP To Browse The Extracted Frimware
Click on Start in ODIn ...Flashing Will Be Start ,Take Some Time To Complete
When ODIN Say Remove The Device Remove It or It'll Automatically Restart the Device
Just Check Auto Reboot & F.Reset.Time Option in ODIn , Leave All Other Options As It is
I Hope It'll Solve Your Issue
Click to expand...
Click to collapse
Thank you very much for your help. I will try and see what happen.
variel30 said:
Thank you very much for your help. I will try and see what happen.
Click to expand...
Click to collapse
Gud Luck :good: ...
If You Get any Error/Dificulties To Understand Than Let Me Know ...we'll try to Sort out the issue than...
TechLife said:
Gud Luck :good: ...
If You Get any Error/Dificulties To Understand Than Let Me Know ...we'll try to Sort out the issue than...
Click to expand...
Click to collapse
Hello again, just one question: Is there a chance something may go wrong if I do this? Like brick my phone or something? This is gonna be my first time doing this and am a little scare.
Also i dont know what firmware download because there are two:
Model SM-N910H
Model name GALAXY Note 4
Country Trinidad and Tobago
Version Android 5.0.1
Changelist 4945475
Build date Tue, 19 May 2015 13:13:03 +0000
Product code TTT
PDA N910HXXU1BOE2
CSC N910HUUB1BOD1
Model SM-N910H
Model name GALAXY Note 4
Country Trinidad and Tobago
Version Android 5.0.1
Changelist 4461737
Build date Fri, 20 Mar 2015 10:32:45 +0000
Product code TTT
PDA N910HXXU1BOC5
CSC N910HUUB1BOB2
And my phone is PDA N910HXXU1ANK5, base band N910HXXU1BOC5. So i am a Little confused.
variel30 said:
Hello again, just one question: Is there a chance something may go wrong if I do this? Like brick my phone or something? This is gonna be my first time doing this and am a little scare.
Also i dont know what firmware download because there are two:
And my phone is PDA N910HXXU1ANK5, base band N910HXXU1BOC5. So i am a Little confused.
Click to expand...
Click to collapse
Tell me your Country/Region So I can Suggest you What to Flash
TechLife said:
Tell me your Country/Region So I can Suggest you What to Flash
Click to expand...
Click to collapse
Im from Honduras, Central America. And the phone Country: Trinidad and Tobago
variel30 said:
Im from Honduras, Central America. And the phone Country: Trinidad and Tobago
Click to expand...
Click to collapse
Flash This one it's Latest & updated To May 2015, Don't worry about anything Just Be careful & Keep all Steps accordingly I Mention in above Posts
Model SM-N910H
Model name GALAXY Note 4
Country Trinidad and Tobago
Version Android 5.0.1
Changelist 4945475
Build date Tue, 19 May 2015 13:13:03 +0000
Product code TTT
PDA N910HXXU1BOE2
CSC N910HUUB1BOD1
TechLife said:
Flash This one it's Latest & updated To May 2015, Don't worry about anything Just Be careful & Keep all Steps accordingly I Mention in above Posts
Model SM-N910H
Model name GALAXY Note 4
Country Trinidad and Tobago
Version Android 5.0.1
Changelist 4945475
Build date Tue, 19 May 2015 13:13:03 +0000
Product code TTT
PDA N910HXXU1BOE2
CSC N910HUUB1BOD1
Click to expand...
Click to collapse
Thank you very much for your help. I will try and see what happen.
General
phone Galaxy note 3 SM-N9005 (on Australia net work)
Device: hlte-product name: hltexx made in Vietnam
knox warranty void
CSC code
original csc code: XSP
rest of the info blank
Firmware
bootloader version: N9005XXUGBOK4
PDA version: N9005XXUGBOK4
CSC version Blank( not Mentioned)
Baseband version blank
Latest firmware
N9005DXUGBOK3/N9005OLBGBOK3/N9005DXUGBOK3
Kernel version
3.4.0-4540543 [email protected]#1
32 bit
android 5.0
build number:LRX21V.N9005XXUGBOK4
flashed two diffrent custom roms and two stock successfully but baseband, csc and imei unknown
stock roms for Australia and hong kong failed
any Advice to recover baseband and imei will be highly appreciated
Did you try flashing the original ROM that came with the phone from sammobile.com?
Baseband flash via Odin from the modem thread.
No IMEI restore backed up EFS folder.
No backup see multiple identical threads modem,,EFS
Sent from my SM-N920C using XDA-Developers mobile app
audit13 said:
Did you try flashing the original ROM that came with the phone from sammobile.com?
Click to expand...
Click to collapse
Hi Audit 13
thanks for the advice
original rom failed to flash
regards
What error did you get? You tried different USB cables and USB ports to flash via Odin?
audit13 said:
What error did you get? You tried different USB cables and USB ports to flash via Odin?
Click to expand...
Click to collapse
yes i have tried different cables and ports failed 0success/ 1failed
these stock rom failed XSA N9005XXUGBOK4, OPSN9005XXUGBOK4 and a few others
these passed but did nit fix the problem CM13, SOKP L-5.1.1 and stock rom from egypt which is the smmalest stock rom N9005XXUGDL8-OJVGBOL1EGY
regards
Desi jatt
It requires the EFS folder to be restored at a service centre .
Below is my phone info. i need all the firmware so that i can flash it back to stock, ive been all over the fourm and google and cant find one specific to my build. Can someone please help me?
Phone Model: SM-G935FD
Device Type: hero2lte
Country of Origin Vietnam
Manufacture Date August 18, 2016
Firmware CS code: BRI (is this britinan?)
Active CSC Code: BRI
CSC Country Code: Taiwan / TW
Mobile Operator: Home/310410
PDA Version: G935FXXU1BPLE
CSC Version: G935FZZT1BPL5
Baseband Version:G935FXXU1BPJJ
Build Number: MMB29K.G935FXXU1BPLE
not sure what direction to go and how to find it. keep in mine if things have change with the original SW. i know nothing of it, Ive seen someone say something about changing a csc file, not sure what it is or how to locate it. please considered this tread from a noob that isnt a noob i just cant find the files i need thanks.
eyesofice said:
Below is my phone info. i need all the firmware so that i can flash it back to stock, ive been all over the fourm and google and cant find one specific to my build. Can someone please help me?
Phone Model: SM-G935FD
Device Type: hero2lte
Country of Origin Vietnam
Manufacture Date August 18, 2016
Firmware CS code: BRI (is this britinan?)
Active CSC Code: BRI
CSC Country Code: Taiwan / TW
Mobile Operator: Home/310410
PDA Version: G935FXXU1BPLE
CSC Version: G935FZZT1BPL5
Baseband Version:G935FXXU1BPJJ
Build Number: MMB29K.G935FXXU1BPLE
not sure what direction to go and how to find it. keep in mine if things have change with the original SW. i know nothing of it, Ive seen someone say something about changing a csc file, not sure what it is or how to locate it. please considered this tread from a noob that isnt a noob i just cant find the files i need thanks.
Click to expand...
Click to collapse
CSC Code BRI = Taiwan
Here more info [emoji6] .... https://www.sammobile.com/2017/02/1...r-the-galaxy-s7-and-galaxy-s7-edge-in-taiwan/
S7 Edge Powered by Echoe
Xode said:
CSC Code BRI = Taiwan
Here more info [emoji6] .... https://www.sammobile.com/2017/02/1...r-the-galaxy-s7-and-galaxy-s7-edge-in-taiwan/
S7 Edge Powered by Echoe
Click to expand...
Click to collapse
Hi,
Thank you for that. Ive attempted to go to the settings and see if the update is there manually and i get a message that says " Software has stopped working". I think i need to flash the phone entirely. Is there a stock odin file out for this update that I can flash via odin for my device?? If not, i have been unable to locate the AP, CSC files and the 2 other that I need to flash the device back o stock. Can anyone assist? Im just worried about not flashing the right file and bricking it.
eyesofice said:
Hi,
Thank you for that. Ive attempted to go to the settings and see if the update is there manually and i get a message that says " Software has stopped working". I think i need to flash the phone entirely. Is there a stock odin file out for this update that I can flash via odin for my device?? If not, i have been unable to locate the AP, CSC files and the 2 other that I need to flash the device back o stock. Can anyone assist? Im just worried about not flashing the right file and bricking it.
Click to expand...
Click to collapse
Hi.... have on XDA a lot of description how to flash a rom ..... here one non XDA...
https://www.sammobile.com/forum/showthread.php?t=30800 [emoji6]
S7 Edge Powered by Echoe
Xode said:
Hi.... have on XDA a lot of description how to flash a rom ..... here one non XDA...
https://www.sammobile.com/forum/showthread.php?t=30800 [emoji6]
S7 Edge Powered by Echoe
Click to expand...
Click to collapse
Thanks I will take a look into that.
Hello,
we bought that phone via eBay Germany. It turned out that the phone is from Columbia (Samsung Chat).
They told us, that we have to travel to Columbia to get the latest Android Version.
Is there an other way to get it to Android 5.0?
IMEI 358917051874355
Serial RV1DB6S0BNL
Basisbandversion N905ZHUENB1
Buildnummer KOT49H.N9005ZHUENB1
karl
Flash stock rom N9005 android 5 via Odin .
See multiple posts on the subject of flashing stock firmware .
sammobile samsung-updates and updato .com have firmware /
JJEgan said:
Flash stock rom N9005 android 5 via Odin .
See multiple posts on the subject of flashing stock firmware .
sammobile samsung-updates and updato .com have firmware /
Click to expand...
Click to collapse
What do I need to check on my phone to find the right firmware?
Somebody made a comment that my firmware on the Note3 are messed up
Product Code SM-N900TZWEXSI
PDA N9005ZHUENB1
CSC N9005ZHUENB1
Baseband N900TUVUCNB4
BOOTloader N900TUVUCNB4
Yes find what the model is first as above shows two different models .
Look under the battery /
IMEI check says N900T = not this forum .
TMobile here
https://forum.xda-developers.com/note-3-tmobile
Label under the battery
JJEgan said:
Yes find what the model is first as above shows two different models .
Look under the battery /
IMEI check says N900T = not this forum .
TMobile here
https://forum.xda-developers.com/note-3-tmobile
Click to expand...
Click to collapse
I'm now totally confused ...
Here the date from the Lable under the battery
MODEL: SM-N9005
FCC ID: A§LSMN9005
SSN:-N9005GSMH
RATED: 3.8V :1500mA
MADE BY SAMSUNG
IMEI is the same written with "slashes"
S/N RF8BF5G6QA8 (different to the info in the device)