Related
Hi All. During a upgrading phase I don' know what appened but:
- The device start only in recovery mode
- I don't able to go in fastbbot mode, both pressing keys on startup of device or by fastbbot command line
- the command "fastboot devices" give me any device attached, or other fastboot cmmand < waiting for device>
- command adb devices give me:
C:\Temp\android-sdk-windows\tools>adb devices
List of devices attached
HT936NG00644 recovery
- I am able to push .zip on Dream (adb push ...) and install it by ALT+S on Dream
- On the Dream I reach this error:
- E:Can't read MISC: (No space left on device)
- E:Can't open /cache/recovery/command
- any other adb command by command line, give me the follow error:
C:\Temp\android-sdk-windows\tools>adb shell
- exec '/system/bin/sh' failed: No such file or directory (2) -
HELPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPP, Its 4 days I didn't able to solve.
Can anyone help me ?
Thanks
Pippapeppa
pippapeppa said:
Hi All. During a upgrading phase I don' know what appened but:
- The device start only in recovery mode
- I don't able to go in fastbbot mode, both pressing keys on startup of device or by fastbbot command line
- the command "fastboot devices" give me any device attached, or other fastboot cmmand < waiting for device>
- command adb devices give me:
C:\Temp\android-sdk-windows\tools>adb devices
List of devices attached
HT936NG00644 recovery
- I am able to push .zip on Dream (adb push ...) and install it by ALT+S on Dream
- On the Dream I reach this error:
- E:Can't read MISC: (No space left on device)
- E:Can't open /cache/recovery/command
- any other adb command by command line, give me the follow error:
C:\Temp\android-sdk-windows\tools>adb shell
- exec '/system/bin/sh' failed: No such file or directory (2) -
HELPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPP, Its 4 days I didn't able to solve.
Can anyone help me ?
Thanks
Pippapeppa
Click to expand...
Click to collapse
What buttons are you holding while you bootup?
Hi JAguirre1231,
Thanks for the response.
I Hold Back+Power or Camera+Power. In any way I boot the Dream always go in Recovery Mode.
Thanks again for Your Help.
Pippapeppa
Try to reflash radio and SPL but be careful. I can't give you warranty that you will not broke your phone completely. You have damaged data in ROM (radio & SPL) and I think that reflashing it should help you but also can damage it completly (but I think that it shouldn't happen). The risks increase fact - you must flash radio & spl from recovery but this method is strongly discouraged because of risks to broke phone (read topics about dangerSPL and why you shouldn't use recovery to flash it).
http://forum.xda-developers.com/showthread.php?t=831139
Hi Gerdal,
Whitch version of Radios and SPL have I to reflash.
Which procedure can I follow ?
Thanks again, there are to many information and I understand that if we can chach procedure, sequence and version we can total brick the phone.
Regards
Pippapeppa
Radio - http://forum.xda-developers.com/showthread.php?t=640535
SPL - in attachments
Flash RADIO, reboot, wait - phone will reboot automatically to recovery, flash SPL, reboot and again wait before phone automatically rebot to recovery. If everything goes correct you can reboot and try to boot in fastboot.
Hi Gerdal,
I just done the two updated without errors.
I didn't resolve The dream start only in recovery mode .
I am desperate
I don't understand this thing, if I run by PC with Dream connected by USB the command:
C:\Temp\android-sdk-windows\tools>adb devices
I obtain:
List of devices attached
HT936NG00644 recovery
The devices is visisible and accesible by PC,
If I run:
C:\Temp\android-sdk-windows\tools>fastboot devices
Nothing is the response, I presume that the tool fastboot don't see the Dream.
Any Hel is appriacied
Regards Pippapeppa
fastboot devices will see phone only if phone is running in fastboot mode. Are you sure you pressing camera+power when you powering on phone? Can you try to flash any ROM in recovery, reboot (do not press any buttons) and try to boot to android? Maybe camera button is broken?
Actually I'm trying to find possibility to flash entire ROM (everything what is in nbh file) through recovery. This should repair everything. Maybe someone know what to do this and will write how to do that?
Hi
Gerdal said:
fastboot devices will see phone only if phone is running in fastboot mode. Are you sure you pressing camera+power when you powering on phone? "Can you try to flash any ROM in recovery", reboot (do not press any buttons) and try to boot to android? Maybe camera button is broken?
Click to expand...
Click to collapse
I haven't find any botton to switch off the Dream, the only way is reboot (HOME+BACK or PHONE+POWER+MENU). So immediatly after I press HOME+bACK I press CAMERA+POWER. Should be that the mapping of the keys are not correct ?
How can perform "Can you try to flash any ROM in recovery", I understood that this operation should be only in fastmode. If I can do it and You can tell me how should be a good way.
Thanks again
Pippapeppa
Which recovery are you using? Have you flashed once a custom recovery for example AmonRa Recovery or ClockWork recovery? If you have one of them you can flash any zip that contains ROM for example cyanogenmod. If you flash this and reboot, the phone should boot into this system. If not we need to find answer why it don't do that.
You are pressing rights buttons when you try to boot in fastboot so I don't understand why it don't works...
Sorry Gerdal I am a beginner on this space.
I explane you the context because I am very frustrated.
The device is of my collegues and I am test it for potential purchase. I have attempted to upgrade it to appreciate al the functionalities and I have done the trouble !
So I don't know which recovery I am using I know that the Dream has been rooted.
If You can be kind to explain me the major step to execute and the reference to the persion of files I will be grateful ... forever.
Thanks again
Pippapeppa
Hi Gerdal,
I have flashed with ionr1-signed.zip, the ROM installed before the Hang.
I have attempt to install and run this (http://forum.xda-developers.com/showpost.php?p=9221440&postcount=39), but without result. seems the internal partition are all broke / unconfigured and any script on this partitation are unavailable.
Always the same behavior
Thanks for any help
Sorry but I can't help you. I don't understand why these ways don't work for you.
Introduction
OK. the story is I was on Thinkpad Tablet A 400-03-0070-0132-ROW, I decided to taste CM10 by Koshu, Thank you Koshu!), I accessed Root by RootDebugfs script! (Folow this instruction: http://forum.xda-developers.com/showthread.php?t=1706588)
Then I installed CWM and backup my tablet, then after install CM10. (Folow this instruction: http://forum.xda-developers.com/showthread.php?t=1846044 , Thanks Koshu again)
Everything was fine. thanks Koshu again !
Then I decided to back to my stock ROM, My backup was corrupted!!!!!! YES! and Thinkpad tablet went to BOOT LOOP.
Finally I solve it after 3 day's experiments! I repeated my experiment and I was successful as many times as I repeated. Then I decide to share my solution to anyone.
It works for any Thnkpad Tablet (US,ROW,WE,...) but at the end you will have A 400-03-0070-0132-ROW, but you can repeat to ROOT, CWM and CM10 again
Before Start
1) your tablet is Thinkpad Tablet and stocked in the boot loop.
2) your tablet partition 4EBT is not lock by factory (you will learn if it is!)
3) after this instruction your tablet cure completely and you will have A 400-03-0070-0132-ROW version, not Rooted but you can access root later (RootDebugfs) and also you can do anything, also you can brick it again and this will solve it again !!!!
4) at each step, if you don't know the meanings, just search this forum.
Instruction:
1) download nvFlash + driver + CMW files + my script (included at the end).
2) put your tablet in the APX mode:
yes, you are at boot loop, but you can push the power button for 10sec. you will be off for a while, instantly push rotation lock key then add power button, wait for 2 second and release both buttons, you are at APX mode now, at the device manager of your control panel you can see APX installed.
3) install APX drivers:
if device start to loop before installing driver go to 2.
install driver from downloded files, drivers folder. windows say something! ignore it! and install driver
4)now we start to put recovery image to your SOS partition, it can help the device come back from loop!
(learn how to go into APX mode)
run my scrip from downloded files (alikghp.bat)
choose install CWM5.0,
go to APX mode and wait.
you will see big PASS on your device.
5) copy
a. clockworkmod folder and it's content
b. ThinkPadTablet_A310_02_0039_0089_ROW.zip
c. ThinkPadTablet_A310_03_0069_0121_ROW.zip
d. ThinkPadTablet_A400_03_0070_0132_ROW.zip
from downloaded files to a SDcard and insert SDcard to your tablet.
6) turn off your device, go to recovery mode (power (after vibration release power, push Vol.up 2 or 3 times), you will see the CWM recovery.
YES you break the DEVIL's LOOP!
7) use Vol.up, Vil.down and power to choose -backup and restore, then
-restore from external sdcard.
the -yes.
be patient and wait until to end.
8) at CWM's main menu choose -install zip from sdcard. then
-choose zip from external sdcard.
-choose ThinkPadTablet_A310_02_0039_0089_ROW.zip
9) again run alikghp.bat but this time
choose install OriginalRecovey
after see the big PASS...
10) turn off, and turn on to recovery mode again.
choose wipe data/factory reset. wait until finish.
choose reboot system now.
11) your tablet back to life. with A310_02_0039_0089_ROW !!! wait until it it's jobs done!
12) turn off and turn on to recovery mode again. choose apply update from external storage.
choose ThinkPadTablet_A310_03_0069_0121_ROW. after finishing reboot and wait wait until it it's jobs done!
repeate this step and
choose ThinkPadTablet_A400_03_0070_0132_ROW after finishing reboot and wait wait until it it's jobs done!
it's done.
now you can root and install CM10 again, (refer to Introduction above) BUT this time make sure your Nandroid backup is healthy and pull it on your hard disk to safety.
==============================================================================
Download files here:
https://drive.google.com/file/d/0B5cPsgBIMN0JLWdlM00wLUlYZEE/edit?usp=sharing
==============================================================================
ENJOY!!! By:Ali Ghodratipour
when using nvflash and type "sync" i got this
error: rcm version 0X4 Command send failed (usb write failed)
is this mean that my tablet partition 4EBT is lock by factory and i can't use this method
m7mdrda said:
when using nvflash and type "sync" i got this
error: rcm version 0X4 Command send failed (usb write failed)
is this mean that my tablet partition 4EBT is lock by factory and i can't use this method
Click to expand...
Click to collapse
I guess this problem may come from 2 area.
1) are you sure that you have installed nvflash drivers properly?
2) do you install Bootloader on your 4EBT partition, because you have to do it before any command sending?
check the following post (thanks suntechnic!) to learn more about nvflashing.
http://forum.xda-developers.com/showthread.php?t=1745450
Thank you ali
i did every thing you said in your post .... i have a bricked thikpad tablet stay in logo when start and have a bricked recovery mode but when i used your methode my tablet don't wont to enter in recovery mode again when i hold start button and push the vol up twice i see on top booting recovery kernal image and my tablet restart after that
i think my bootloader is unlocked but i dont know how to use nvfash so please help me i don't know what i will do please is there a solution
if you have solution i can give you permission to enter to my pc and do what ever you want to do just please help me
same as gharib madrid; but my thinkpad boots directly into "booting recovery kernal image" screen, then it hangs for few seconds then it powers down or restarts into bootloops,
my bootloader is unlocked.
after trying this method in the original post TENS of times, with bootload inetialize failuer, I got this
Code:
Nvflash started
[resume mode]
sending file: recCWM5.img
/ 4452352/4452352 bytes sent
recCWM5.img sent successfully
failed executing command 25 NvError 0x120002
command failure: sync failed (bad data)
bootloader status: Bct Write Failed (code: 22) message: nverror:0x42008 (0x6042008) flags: 0
anyone can help me in this?
7) use Vol.up, Vil.down and power to choose -backup and restore, then
-restore from external sdcard.
the -yes.
be patient and wait until to end.
How long this step may take?
after
"Cheking MD5 sums...
Erasing boot before restore...
Restoring boot image...
Restoring system...?
it looks like the process hanged here, now 25 minutes passed and still waiting some cool to happen
anyone who tried this method, please reply
ana_mawjoud said:
same as gharib madrid; but my thinkpad boots directly into "booting recovery kernal image" screen, then it hangs for few seconds then it powers down or restarts into bootloops,
my bootloader is unlocked.
after trying this method in the original post TENS of times, with bootload inetialize failuer, I got this
Code:
Nvflash started
[resume mode]
sending file: recCWM5.img
/ 4452352/4452352 bytes sent
recCWM5.img sent successfully
failed executing command 25 NvError 0x120002
command failure: sync failed (bad data)
bootloader status: Bct Write Failed (code: 22) message: nverror:0x42008 (0x6042008) flags: 0
anyone can help me in this?
Click to expand...
Click to collapse
My thinkpad tablet suddenly die..and i am suck in the same place as you... it shows "booting recovery kernal image" screen, then it hangs for few seconds then it powers down or restarts into bootloops,
WIll my thinkpad 32G be an issue?
Hi.
I had the same problem. Follows the isntructions an after that "booting recovery kernal image" plus lenovo loop.
My solution was: I had changed the line 30 in "alikghp.bat" by:
nvflash -r --download 6 clockworkmod\backup\ThinkPadTablet_0089_ROW_Root_CWM\recovery.img
that is: I had used the recovery partition from "clockworkmod\backup\ThinkPadTablet_0089_ROW_Root_CWM".
After that, the steps 6 and 7 of post#1 work!!
reaperhk said:
My thinkpad tablet suddenly die..and i am suck in the same place as you... it shows "booting recovery kernal image" screen, then it hangs for few seconds then it powers down or restarts into bootloops,
WIll my thinkpad 32G be an issue?
Click to expand...
Click to collapse
The files?
Thank You for all this help, Ali. I'm trying to follow these instructions today with a Thinkpad 1838 tablet to that's stuck in the animation loop.............but the link to your files is broken.
Can you (or anyone reading) help me?
Thanks again; this is a great tablet, and I wish to resurrect it for my daughter for her birthday.
***************************************************
aliakg56 said:
Introduction
OK. the story is I was on Thinkpad Tablet A 400-03-0070-0132-ROW, I decided to taste CM10 by Koshu, Thank you Koshu!), I accessed Root by RootDebugfs script! (Folow this instruction: http://forum.xda-developers.com/showthread.php?t=1706588)
Then I installed CWM and backup my tablet, then after install CM10. (Folow this instruction: http://forum.xda-developers.com/showthread.php?t=1846044 , Thanks Koshu again)
Everything was fine. thanks Koshu again !
Then I decided to back to my stock ROM, My backup was corrupted!!!!!! YES! and Thinkpad tablet went to BOOT LOOP.
Finally I solve it after 3 day's experiments! I repeated my experiment and I was successful as many times as I repeated. Then I decide to share my solution to anyone.
It works for any Thnkpad Tablet (US,ROW,WE,...) but at the end you will have A 400-03-0070-0132-ROW, but you can repeat to ROOT, CWM and CM10 again
Before Start
1) your tablet is Thinkpad Tablet and stocked in the boot loop.
2) your tablet partition 4EBT is not lock by factory (you will learn if it is!)
3) after this instruction your tablet cure completely and you will have A 400-03-0070-0132-ROW version, not Rooted but you can access root later (RootDebugfs) and also you can do anything, also you can brick it again and this will solve it again !!!!
4) at each step, if you don't know the meanings, just search this forum.
Instruction:
1) download nvFlash + driver + CMW files + my script (included at the end).
2) put your tablet in the APX mode:
yes, you are at boot loop, but you can push the power button for 10sec. you will be off for a while, instantly push rotation lock key then add power button, wait for 2 second and release both buttons, you are at APX mode now, at the device manager of your control panel you can see APX installed.
3) install APX drivers:
if device start to loop before installing driver go to 2.
install driver from downloded files, drivers folder. windows say something! ignore it! and install driver
4)now we start to put recovery image to your SOS partition, it can help the device come back from loop!
(learn how to go into APX mode)
run my scrip from downloded files (alikghp.bat)
choose install CWM5.0,
go to APX mode and wait.
you will see big PASS on your device.
5) copy
a. clockworkmod folder and it's content
b. ThinkPadTablet_A310_02_0039_0089_ROW.zip
c. ThinkPadTablet_A310_03_0069_0121_ROW.zip
d. ThinkPadTablet_A400_03_0070_0132_ROW.zip
from downloaded files to a SDcard and insert SDcard to your tablet.
6) turn off your device, go to recovery mode (power (after vibration release power, push Vol.up 2 or 3 times), you will see the CWM recovery.
YES you break the DEVIL's LOOP!
7) use Vol.up, Vil.down and power to choose -backup and restore, then
-restore from external sdcard.
the -yes.
be patient and wait until to end.
8) at CWM's main menu choose -install zip from sdcard. then
-choose zip from external sdcard.
-choose ThinkPadTablet_A310_02_0039_0089_ROW.zip
9) again run alikghp.bat but this time
choose install OriginalRecovey
after see the big PASS...
10) turn off, and turn on to recovery mode again.
choose wipe data/factory reset. wait until finish.
choose reboot system now.
11) your tablet back to life. with A310_02_0039_0089_ROW !!! wait until it it's jobs done!
12) turn off and turn on to recovery mode again. choose apply update from external storage.
choose ThinkPadTablet_A310_03_0069_0121_ROW. after finishing reboot and wait wait until it it's jobs done!
repeate this step and
choose ThinkPadTablet_A400_03_0070_0132_ROW after finishing reboot and wait wait until it it's jobs done!
it's done.
now you can root and install CM10 again, (refer to Introduction above) BUT this time make sure your Nandroid backup is healthy and pull it on your hard disk to safety.
==============================================================================
Download files here:
https://drive.google.com/file/d/0B5cPsgBIMN0JLWdlM00wLUlYZEE/edit?usp=sharing
==============================================================================
ENJOY!!! By:Ali Ghodratipour
Click to expand...
Click to collapse
Ive upload files again
Dear friend, I tried to upload my script, however the post is so old and I don't have all the files. But you can find all of them in this forum and in the internet. just google the file's names. I wish you luck!
Here you can download stock ROMs:
http://download.lenovo.com/slates/think/tablet1
for NVFlash this link can help you:
http://forum.xda-developers.com/showthread.php?t=1745450
I am not Chinese but this website + google chrome translator is something
http://cnzhx.net/blog/apx-root-thinkpad-tablet/
Updated post for Lineage OS 14.1
Thanks a lot to @Anik_khan , @P.Kosunen , TWRP and CM team and all XDA forumers who asked questions that allowed me to update my phone.
I am not responsible for any trouble you might run into, always cross-check your sources.
Whole process took me 1h15 / 1h30
Will rework/add links upon request, will quote names upon request,
Thanks,
Sources/Links:
http://forum.xda-developers.com/redmi-3/development/recovery-twrp-3-0-0-0-touch-recovery-t3340118
https://forum.xda-developers.com/redmi-3/development/rom-cyanogenmod-14-0-t3481701
http://forum.xda-developers.com/red...eveloper-rom-unlock-bootloader-t3339246/page6
http://en.miui.com/unlock/
Miflash: http://api.bbs.miui.com/url/MiFlash
Mi Unlock: http://bigota.d.miui.com/miflashunlock/MiFlashUnlock_1.1.0317.1_en.zip
http://en.miui.com/download-298.html
http://en.miui.com/a-234.html
https://twrp.me/devices/xiaomiredmi3.html
Others...
Request unlocking permission:
Go to http://en.miui.com/unlock/
"Unlock Now" (refresh if page fails to load)
Create a "Mi Account ID" (you can also create it from your phone Miui app)
Apply for unlocking permission: Your Name, Phone number, Justification "Android developer"
Download "Mi Unlock": http://en.miui.com/unlock/download_en.html
Extract "Mi Unlock" file ("MiFlashUnlock")
Install developer ROM:
Download Miflash tool http://api.bbs.miui.com/url/MiFlash
Install Miflash tool
Restart computer as per section: Windows 10 "Disable driver signature enforcement"
Download last Chinese developer ROM for Xiaomi Redmi 3 http://en.miui.com/a-234.html
Note: Global ROM does not allow for ROOT activation
Extract ROM, tgz, then tar
Reboot to recovery, power off, power on "Vol. up" + "Power"
Touch "Download" button (screen goes black)
Plug-in USB cable
Open Miflash tool
Click "Browse" and select directory from ROM extract
Select "Flash all" at the bottom
Click "Refresh" and then "Flash", wait for install
...
Maintain "Power" to reset the phone, let it boot
(You can also install whatever official MIUI ROM you want from there http://en.miui.com/a-234.html)
Windows 10 "Disable driver signature enforcement":
Maintain "Shift" key while you click the "Restart" option in Windows
"Troubleshoot" > "Advanced options" > "Startup settings" > "Restart"
...restarting...
F7 "Disable driver signature enforcement"
Unlock Bootloader:
AFTER YOU GET APPROVAL SMS (last request took 15 minutes to be accepted)
Ensure you installed a developer ROM ("Flash all")
Skip everything
Note: Login with your MIUI account if you have never done it, do NOT activate FIND application
Power OFF device
Start fastboot, hold "Vol. down" + "Power"
Execute "MiFlashUnlock.exe" from "Mi Unlock" extract
Agree and "Sign in" with your created "Mi Account ID"
Connect phone
Unlock
Restart...
Install TWRP:
Connect device to computer
Connect to WIFI
Activate Root on the phone (different from TWRP): Setting > Permissions > Root access
Activate root access
Phone will install and restart
...meanwhile...
Install Android tools https://developer.android.com/studio/index.html#linux-bundle-size
(Install Java SDK)
...phone restarted...
Run Windows command prompt as administrator
"Windows" key, type "CMD", right click "Run as administrator"
Execute "cd C:\Program Files (x86)\Android\android-sdk\platform-tools"
Or whatever is your path to Android SDK
Execute "adb devices", ensure that your phone is listed
Execute "adb root"
Execute "adb disable-verity" (Note: You do not need to perform this step again if you want to UPDATE TWRP version)
Restart... (disable verity to take effect)
Download TWRP application
http://download.jmzsoftware.com/TWRPManager.apk
Copy it at the root of your phone
Install it from MIUI embedded file explorer
Start TWRP application and wait for phone to prompt for root access
Give TWRP Root acess: Settings > Permissions (Device) > Root access
Allow TWRP root access (Next to all, long...)
Launch TWRP
Click sandwich menu ///
Install TWRP
DEVICE INFO > Device name: Xiaomi Redmi 3 / ido
INSTALL > Recovery version to install > click latest
INSTALL > Install Recovery
TWRP will download and install itself (Click Yes to try flash, Yes to reboot to recovery)
Install CM and GApps:
Download Lineage OS: https://forum.xda-developers.com/redmi-3/development/rom-cyanogenmod-14-0-t3481701
Download GApps ARM64 (7.1 for LineageOS 14.1): http://opengapps.org/
https://github.com/opengapps/opengapps/wiki/FAQ
Connect device to computer
Reboot to recovery (see "Reboot to recovery")
Select "Keep read only"
Manually wipe Data partition and System partition
(I wiped all because of "can't install this package on top of incompatible data" message)
Copy CM and GApps to phone
On TWRP: Install and flash ROM and GApps (add to queue, GApps takes a while)
Wipe Dalvik & Cache
Reboot
Recovery reboot:
- On CM
https://wiki.cyanogenmod.org/w/All_About_Recovery_Images
Activate Developer mode: https://wiki.cyanogenmod.org/w/Doc:_developer_options
Settings > Developer options > Advanced reboot = On
Hold the power button to see the reboot menu
- Using ADB
Run command prompt as administrator
cd C:\Program Files (x86)\Android\android-sdk\platform-tools
adb reboot recovery
Thanks man, awesome job!
Hey guys. Thanks for the guide, I'm stuck however. I installed the latest global developer ROM in order to root and flash twrp, but there is no native option to root the ROM. What am I doing wrong? Bootloader is unlocked with xiaomi approval. Or is root China Rev ROM exclusive? If yes, the op should make that very clear, so that even dimwits like me understand it.
Rotpeter said:
Hey guys. Thanks for the guide, I'm stuck however. I installed the latest global developer ROM in order to root and flash twrp, but there is no native option to root the ROM. What am I doing wrong? Bootloader is unlocked with xiaomi approval. Or is root China Rev ROM exclusive? If yes, the op should make that very clear, so that even dimwits like me understand it.
Click to expand...
Click to collapse
Hi there,
I did not use global ROM, true, don't know if possible with it.
Did you perform this step?
- Connect to WIFI
- Setting > Permissions > Root access
- Activate root access
The phone will then download a bunch of things and reboot.
After that you will be able to install TWRP and give it root access.
If not, tell me, I will update guide,
and you can reinstall Chinese ROM, to complete process, a matter of a few minutes.
Let me know
Thanks for your help! I already fixed in in the meantime, though. The permissions app only shows the root-button, if you are on the Chinese dev ROM. Which I wasn't (global one instead). Maybe you should add some extra weight to that in the guide. Other than that, it worked like a charm! Thanks buddy!
Edit: Sorry, didn't see that you pretty much already wrote all of that.
anyone else waiting more than two days for the request to be accepted?
en.miui.com/unlock/download_en.html
without waiting
Hi,
I have problem after this step
Install TWRP:
TWRP will download and install itself (Click Yes to try flash, Yes to reboot to recovery)
Click to expand...
Click to collapse
Answer from TWRP is Success, but after reboot to recovery there is no TWRP, just MI logo all the time.
Model is Redmi 3S Global
and of course:
C:\xx\platform-tools>adb disable-verity
Verity already disabled on /system
Click to expand...
Click to collapse
Have you downloaded the TWRP version for the 3 S? Not the Redmi 3?
I am not sure what are the differences here, but maybe the phone cannot boot if it is the wrong version.
parphane said:
Have you downloaded the TWRP version for the 3 S? Not the Redmi 3?
I am not sure what are the differences here, but maybe the phone cannot boot if it is the wrong version.
Click to expand...
Click to collapse
sorry, I realized that not all Redmi 3 are ido, my is land :crying: so TWRP for land is working
Hi all,
I am on:
- 02-06 nightly (https://download.lineageos.org/ido)
- ARM64 7.1 Stock GApps (http://opengapps.org/)
Camera app is not working at all, crashing instantly,
Do you know what could I have missed? Maybe not wiped correctly?
What could I do to troubleshoot/fix?
Thanks,
Answered: Inhibit Camera app automatic updates for the moment...
Updated post for LineageOS 14.1 and checked if links are still ok.
Hello there,
I need a little help : I get stuck trying to install the latest Chinese developper ROM.
I get a "ping target failed" error, as seen in the pic here : http://hpics.li/32bd109
Can you help me please ?
Galdanor
Galdanor said:
Hello there,
I need a little help : I get stuck trying to install the latest Chinese developper ROM.
I get a "ping target failed" error, as seen in the pic here : http://hpics.li/32bd109
Can you help me please ?
Galdanor
Click to expand...
Click to collapse
Hmm, never seen that one,
Just to be sure, you did the following steps:
- Restart computer as per section: Windows 10 "Disable driver signature enforcement"
[...]
- Reboot to recovery, power off, power on "Vol. up" + "Power"
- Touch "Download" button (screen goes black)
- Plug-in USB cable
- Open Miflash tool... (this I know you did cause of the screen capture)
Do you have any devices identified as not properly installed in the Window peripherals?
Maybe try and install Android tools (also in the tuto) before and try to issue commands to your device.
Also, Googling "ping target failed xiaomi" I found that: http://en.miui.com/thread-354050-1-1.html
You might want to use older tool version.
Let us know
Thank you for your time.
parphane said:
Also, Googling "ping target failed xiaomi" I found that: http://en.miui.com/thread-354050-1-1.html
You might want to use older tool version.
Let us know
Click to expand...
Click to collapse
This worked !
Can't believe I didn't google my error thoroughly... Seems that the older I get, the lazier I become...
Just need to wait for the approval SMS now.
Thanks a lot for your help !
Galdanor
ambient display (dt2w option) for me don't work
wetito said:
ambient display (dt2w option) for me don't work
Click to expand...
Click to collapse
We don't have DT2W support by default.
Sent from my Redmi 3 using XDA Labs
This rom drain my battere a lot. It's a Shame. 8 hours in aeroporto mode, 20% battery less
wetito said:
This rom drain my battere a lot. It's a Shame. 8 hours in aeroporto mode, 20% battery less
Click to expand...
Click to collapse
Maybe you did something wrong cause most of the people here on XDA have no issue.
Try using an older ROM, or clean install... let us know!
By the way, this is just a guide to flashing,
Which I believe was useful for you cause you were able to change ROM.
Don't report bugs/issues on the ROM here, it is just a guide, report them on the ROM thread itself: https://forum.xda-developers.com/redmi-3/development/rom-cyanogenmod-14-0-t3481701
Hey guys,
I really do not know what to do.
with redmi one - i did not have problems - ok only one time
now I tried to put new international rom on my redmi 3 in holiday. I really treid it for at least 10 hours now! no success. I think, i am stupid....
flash unlock with sms and tool "miflash_unlock-en-2.2.406.5" worked.
next step is to power off and turn on with power up and power button.
If I do this, the redmi device always goes to fastboot picture rabbit and does not react to anything.
At this point I could not do anything. I always waited until accu was empty (1day) and then try it again in some other way.
Is there some really good guide? I do not know what i am doing wrong.
thank you in advance.
my redmi 3s crashed yesterday and i have the same problem now.
see here:
https://forum.xda-developers.com/xiaomi-redmi-3s/help/phone-crashed-fingerprint-deleted-120-t3603930
for redmi 3 i downloaded a lot:
roms
02 MiFlashUnlock
03 TWRP
05 Root SuperSU
TWPR and RootSuperuser i do not get installed, too.
Hi,
Today I just installed a custom ROM for my Zuk Z2 PRO. This tutorial is how I did it.
I get many ressources from this forum and I thank orignal authors.
Big thanks to meister for his guide : https://forum.xda-developers.com/zuk-z2-pro/how-to/zuk-z2-pro-guide-to-everything-ota-t3562099
And big thanks to m_atze for his guide : https://forum.xda-developers.com/zuk-z2-pro/how-to/howto-flash-stock-rom-t3435109
More info on this ROM : https://forum.xda-developers.com/zuk-z2-pro/development/rom-share-lr-team-zuk-z2row-z2-pro-t3567710
Backup your data before processing the flash, in order to avoid loss of data!
Flashing / rooting and install custom ROM could brick your device ! You're the only responsible on what you're doing. This guide is how I did it and I'm not responsible if you're messing up your device
Unlock bootloader (step 3) will void Lenovo warranty
Antutu Score : 143050
Summary :
Step 1 : Prepare environment
Step 2 : Install ZUI 2.5.x (recommended before installing Nougat custom ROM)
Step 3 : Unlock bootloader (to be able to boot on TWRP)
Step 4 : Boot on TWRP to root the phone
Step 5 : Make a Nandroid backup
Step 6 : Install TWRP
Step 7 : Install a custom ROM with TWRP
Step 8 : Install Gapps (google apps)
Step 1 : Prepare environment
Create a directory where you're gona extract download files (avoid space in the directory path).
Download : adb and fastboot from google
Extract it on your previous created directory.
Download usb drivers and install it
Enable developer mode in your Z2 PRO (link if your don't know how to do it)
Connect your phone on your computer
On the directory C:/yourDirectoryPath/platform-tools maintains shift + rigth click and "Open command window here"
Type adb devices
If your see a line below "List of devices attached" your adb is OK
Note the number somewhere, it's your device serial number.
On the phone type *#06# and note somewhere IMEI numbers in case something went wrong during flashing
Step 2 : Install ZUI 2.5.x (recommended before installing Nougat custom ROM)
For this part I use the m_atze tutorial that you can find here. Check it for me detailed steps.
If you are on windows 8, 8.1 or 10, you have to disable driver verification (some people didn't disable driver verification and it works as well)
For windows 10 with anniversary update : you just have to run a cmd as admin and enter bcdedit -set TESTSIGNING ON then reboot your computer (your windows will be in test mode)
For other cases check this link
Then
Download QPST flashtool
Install QPST flashtool and reboot your computer
Download and extract ZUI ROM 2.5.x (you maybe need to rename the directory where the ROM is because it could be too big)
Launch QFIL application as administrator
Go to Configuration -> FireHostConfiguration. 1-change device type to UFS. 2-check reset after download checkbox
Click on "Load content" and browse the contents.xml from the ZUI ROM 2.5.x extracted files
On the adb console you opened earlier, enter adb reboot edl
The QFIL page should look like this
Click on "Download content" to flash your phone
The final screen should like this
If any problem, there is an FAQ
Your phone is gonna reboot, congratulation, you're flashed your phone with ZUI 2.5.x ROM.
Once the phone boots up it will be in Chinese again. To get your phone back in English :
On the welcome screen tap the bottom of the screen below the highlighted blue text to skip the ZUK login.
To change the language back to English go to Settings.
In the third section choose the last entry. "Advanced Settings" (the gears symbol).
Choose the 2nd menu item.
Choose the first menu item and select English.
Now check update and install it if needed trough this app. If the check is green, it's ok.
Re-enable developer mode and debugging
Step 3 : Unlock bootloader (to be able to boot on TWRP)
This step is almost a copy past of section 2 of meister guide
This step gonna void your Lenovo warranty and wipe your data
Step 3.1 : Get the unlock bootloader from Lenovo
In order to unlock the bootloader you will need to got the zuk website, where you need to register first before you can request to unlock the bootloader.
So go here : https://passport.zuk.com/wauthen3/wauth/jsp/register.jsp (use google translate)
Select Email Registration (upper right corner) and fill in the required data
You will receive an Email with a confirmation link.
Now that you are registered, log in and than go to http://developer.zuk.com/bootloader (use google translate)
Click on Carry On.
On the next page select your phone type Z2 Pro.
Enter your serial number (8 digits) (you can find it on Settings -> About -> Status. If your serial is not 8 digit, add 0 to the end to make a 8 digit number)
Enter an email address where to send the unlock image. It seems that the email address here has to follow some rules. ([email protected] or @Web.net seems to work. A domain name with a hyphen (-) seems to cause problems, i use a @hotmail.com mail adresse and it worked)
Check the 2 check boxes and click SUBMIT
If successful you get a message that the image has been sent to your email address. No message means something went wrong. Likely the email address was not approved.
Save the email attachment from ZUK you requested earlier (named unlock_bootloader.img) into C:/yourDirectoryPath/platform-tools/ (next to adb.exe)
Step 3.2 : Unlock bootloader
On adb console enter adb devices to check if your device is still connected
Next enter adb reboot bootloader and your phone gonna reboot in bootloader mode
Next enterfastboot -i 0x2b4c flash unlock unlock_bootloader.img (if you got error "target did not report max-download-size" change from usb 3.0 to usb 2.0 port and / or try to turn on "enable_usb_2.0" via
Developer Options)
You should see
Code:
target reported max download size of 1610612736 bytes
sending 'unlock' (0 KB)...
OKAY [ 0.031s]
writing 'unlock'...
OKAY [ 0.063s]
finished. total time: 0.094s
Then enter fastboot -i 0x2b4c oem unlock-go
You should see
Code:
...
OKAY [ 0.031s]
finished. total time: 0.031s
You phone is gonna reboot (or reboot it manually)
Change the phone language to english and re enable debugging.
Step 4 : Boot on TWRP to root the phone
Download TWRP 3.1 for Zuk Z2 PRO here and extrat TWRP..... .img next to adb.exe in platform-tools folder
Download SuperSu here
Copy paste SuperSu zip file in your phone internal storage
In adb cmd enter adb reboot bootloader
Then enter fastboot -i 0x2b4c boot TWRP3.1.0.0_ZUK_Z2_pro.img to boot in TWRP image
Click on "Keep read only"
Go to install and browse to SuperSu zip.
Swipe to install
When installation is finished, reboot your phone (it may reboot many times)
Good job, your phone is now rooted !
Step 5 : Make a Nandroid backup
In adb cmd enter adb reboot bootloader
Then enter fastboot -i 0x2b4c boot TWRP3.1.0.0_ZUK_Z2_pro.img to boot in TWRP image
Go in backup and check all checkbox
Swipe to backup
Reboot the phone
From your computer browse your phone internal memory and copy your backup from TWRP/Backup/XXXXX to a directory in your computer
Step 6 : Install TWRP
In adb cmd enter adb reboot bootloader
Then fastboot flash recovery TWRP3.1.0.0_ZUK_Z2_pro.img to install TWRP on your phone
Then fastboot reboot
Then adb reboot bootloader
Then with volume keys select Recovery Mode and enter in Recovery Mode by pushing power key
TWRP will start
Reboot your phone
Step 7 : Install a custom ROM with TWRP
Download ROM from https://uploadfiles.io/55ffa
Copy paste ROM zip file in your phone internal storage
In adb cmd enter adb reboot bootloader
Then with volume keys select Recovery Mode and enter in Recovery Mode by pushing power key
Click Wipe and swipe to wipe. Do NOT reboot your phone.
Go back in TWRP main menu and click Install. Browse the ROM zip file
Swipe to install
Reboot your phone
When your phone reboot, it's in chinese. Click on the texte in the right bottom corner and then select your language.
During the phone configuration, do not connect wifi (in my case the phone configuration crashed when I connected to a wifi)
When you finished phone configuration reboot to get notification in your language
Step 8 : Install Gapps (google apps)
Download Gapps from https://forum.xda-developers.com/android/software/gapps-dynamic-gapps-t3487192
Copy the zip file in your phone
Reboot in TWRP
Install Gapps through TWRP
Reboot your phone
At this point my Google Play Services crashed each reboot. So needed to
Reboot in TWRP
Wipe cache
Now it works !
You can install other ROM with this method but I only tested with this one.
Enjoy
First of all, thank you for your help.
I followed this tutorial from start to finish without encountering any unexpected events. It is rare to say so!
Small points:
Step 1:
*- Think of connecting the phone before the command "adb devices", it's stupid but I had not done it!
Step 2:
*- I did not need to change my driver settings on Windows 10.
*- I had to run the QFIL application as an administrator.
*- I had to rename the directory where the ROM was because the name was too big.
Step 3.1:
*- I have a serial number on 7 characters, you must add "0" at the end to make 8 characters.
*- My Gmail address worked smoothly.
Step 4:
*- The SuperSU link did not work, I took this one: http://downloadmirror.co/Utz/UPDATE-SuperSU-v2.79-20161211114519.zip
*- Some reboot at home also, it seems to be normal.
Step 7:
*- I took the ROM "Resurrection Remix", no problem with another ROM.
Step 8:
*- I also had a crash of Google apps, I also did a wipe and it works now. It looks normal too.
Thank you again for your help!
Glade I could help !
Thanks for your feedback, I'm gonna update the tutorial
Hi,
great tutorial, thank you!
Step 6 : Install TWRP - I'm stuck though, as my PC still does not recognize device on fastboot without -i 0x2b4c...
so should I use instead of
Then fastboot flash recovery TWRP3.1.0.0_ZUK_Z2_pro.img to install TWRP on your phone
Then fastboot reboot
Click to expand...
Click to collapse
the -i option ?
Then fastboot -i 0x2b4c flash recovery TWRP3.1.0.0_ZUK_Z2_pro.img to install TWRP on your phone
Then fastboot -i 0x2b4c reboot
Click to expand...
Click to collapse
?
... edit, yes that worked ...
lxlx said:
... edit, yes that worked ...
Click to expand...
Click to collapse
Great ! Good to know
Step 3.1 : Get the unlock bootloader from Lenovo
- gmail works
- did not work to get the bootloader with google translater . had to do it in Chinese, but knew the steps since i tried it with translation first
zwat said:
Step 3.1 : Get the unlock bootloader from Lenovo
- gmail works
- did not work to get the bootloader with google translater . had to do it in Chinese, but knew the steps since i tried it with translation first
Click to expand...
Click to collapse
Thanks for the feedback, I updated the tuto.
Thank you for this tutorial, it worked like a charm!
I'm currently on ZUI 2.5.x. Can I go straight to official MK60.1 using this guide?
Or should I downgrade to ZUI 2.3.x first
dommels said:
I'm currently on ZUI 2.5.x. Can I go straight to official MK60.1 using this guide?
Or should I downgrade to ZUI 2.3.x first
Click to expand...
Click to collapse
I don't know sorry :/
Maybe downgrade to 2.3.x is more secured...
For my information, why do you want to install the MK60.1 ?
Bluud said:
I don't know sorry :/
Maybe downgrade to 2.3.x is more secured...
Click to expand...
Click to collapse
Just went from stock 2.5x to MK60.1 without issues, thanks!
For my information, why do you want to install the MK60.1 ?
Click to expand...
Click to collapse
So far it's the only stable official release from Mokee.
Mk60.1 have exactly the same bugs like Mk71.1. so no need to use mk60.1. mk71.1 is pretty stable btw.
So far quite happy running Mokee. Is there an easy way to root as well?
dommels said:
So far quite happy running Mokee. Is there an easy way to root as well?
Click to expand...
Click to collapse
Mokee was quite good.
Yesterday I installed this ROM : https://forum.xda-developers.com/zu...tom-rom-zuk-z2pro-resurrection-remix-t3579113
I prefer this ROM because you can custom it in many ways.
Since yesterday it's stable.
Question
Bluud said:
Mokee was quite good.
Yesterday I installed this ROM : https://forum.xda-developers.com/zu...tom-rom-zuk-z2pro-resurrection-remix-t3579113
I prefer this ROM because you can custom it in many ways.
Since yesterday it's stable.
Click to expand...
Click to collapse
It's the same tutorial?
Yes
Bluud said:
Hi,
Today I just installed a custom ROM for my Zuk Z2 PRO. This tutorial is how I did it.
I get many ressources from this forum and I thank orignal authors.
Big thanks to meister for his guide : https://forum.xda-developers.com/zuk-z2-pro/how-to/zuk-z2-pro-guide-to-everything-ota-t3562099
And big thanks to m_atze for his guide : https://forum.xda-developers.com/zuk-z2-pro/how-to/howto-flash-stock-rom-t3435109
More info on this ROM : https://forum.xda-developers.com/zuk-z2-pro/development/rom-share-lr-team-zuk-z2row-z2-pro-t3567710
Backup your data before processing the flash, in order to avoid loss of data!
Flashing / rooting and install custom ROM could brick your device ! You're the only responsible on what you're doing. This guide is how I did it and I'm not responsible if you're messing up your device
Unlock bootloader (step 3) will void Lenovo warranty
Antutu Score : 143050
Summary :
Step 1 : Prepare environment
Step 2 : Install ZUI 2.5.x (recommended before installing Nougat custom ROM)
Step 3 : Unlock bootloader (to be able to boot on TWRP)
Step 4 : Boot on TWRP to root the phone
Step 5 : Make a Nandroid backup
Step 6 : Install TWRP
Step 7 : Install a custom ROM with TWRP
Step 8 : Install Gapps (google apps)
Step 1 : Prepare environment
Create a directory where you're gona extract download files (avoid space in the directory path).
Download : adb and fastboot from google
Extract it on your previous created directory.
Download usb drivers and install it
Enable developer mode in your Z2 PRO (link if your don't know how to do it)
Connect your phone on your computer
On the directory C:/yourDirectoryPath/platform-tools maintains shift + rigth click and "Open command window here"
Type adb devices
If your see a line below "List of devices attached" your adb is OK
Note the number somewhere, it's your device serial number.
On the phone type *#06# and note somewhere IMEI numbers in case something went wrong during flashing
Step 2 : Install ZUI 2.5.x (recommended before installing Nougat custom ROM)
For this part I use the m_atze tutorial that you can find here. Check it for me detailed steps.
If you are on windows 8, 8.1 or 10, you have to disable driver verification (some people didn't disable driver verification and it works as well)
For windows 10 with anniversary update : you just have to run a cmd as admin and enter bcdedit -set TESTSIGNING ON then reboot your computer (your windows will be in test mode)
For other cases check this link
Then
Download QPST flashtool
Install QPST flashtool and reboot your computer
Download and extract ZUI ROM 2.5.x (you maybe need to rename the directory where the ROM is because it could be too big)
Launch QFIL application as administrator
Go to Configuration -> FireHostConfiguration. 1-change device type to UFS. 2-check reset after download checkbox
Click on "Load content" and browse the contents.xml from the ZUI ROM 2.5.x extracted files
On the adb console you opened earlier, enter adb reboot edl
The QFIL page should look like this
Click on "Download content" to flash your phone
The final screen should like this
If any problem, there is an FAQ
Your phone is gonna reboot, congratulation, you're flashed your phone with ZUI 2.5.x ROM.
Once the phone boots up it will be in Chinese again. To get your phone back in English :
On the welcome screen tap the bottom of the screen below the highlighted blue text to skip the ZUK login.
To change the language back to English go to Settings.
In the third section choose the last entry. "Advanced Settings" (the gears symbol).
Choose the 2nd menu item.
Choose the first menu item and select English.
Now check update and install it if needed trough this app. If the check is green, it's ok.
Re-enable developer mode and debugging
Step 3 : Unlock bootloader (to be able to boot on TWRP)
This step is almost a copy past of section 2 of meister guide
This step gonna void your Lenovo warranty and wipe your data
Step 3.1 : Get the unlock bootloader from Lenovo
In order to unlock the bootloader you will need to got the zuk website, where you need to register first before you can request to unlock the bootloader.
So go here : https://passport.zuk.com/wauthen3/wauth/jsp/register.jsp (use google translate)
Select Email Registration (upper right corner) and fill in the required data
You will receive an Email with a confirmation link.
Now that you are registered, log in and than go to http://developer.zuk.com/bootloader (use google translate)
Click on Carry On.
On the next page select your phone type Z2 Pro.
Enter your serial number (8 digits) (you can find it on Settings -> About -> Status. If your serial is not 8 digit, add 0 to the end to make a 8 digit number)
Enter an email address where to send the unlock image. It seems that the email address here has to follow some rules. ([email protected] or @Web.net seems to work. A domain name with a hyphen (-) seems to cause problems, i use a @hotmail.com mail adresse and it worked)
Check the 2 check boxes and click SUBMIT
If successful you get a message that the image has been sent to your email address. No message means something went wrong. Likely the email address was not approved.
Save the email attachment from ZUK you requested earlier (named unlock_bootloader.img) into C:/yourDirectoryPath/platform-tools/ (next to adb.exe)
Step 3.2 : Unlock bootloader
On adb console enter adb devices to check if your device is still connected
Next enter adb reboot bootloader and your phone gonna reboot in bootloader mode
Next enterfastboot -i 0x2b4c flash unlock unlock_bootloader.img (if you got error "target did not report max-download-size" change from usb 3.0 to usb 2.0 port and / or try to turn on "enable_usb_2.0" via
Developer Options)
You should see
Then enter fastboot -i 0x2b4c oem unlock-go
You should see
You phone is gonna reboot (or reboot it manually)
Change the phone language to english and re enable debugging.
Step 4 : Boot on TWRP to root the phone
Download TWRP 3.1 for Zuk Z2 PRO here and extrat TWRP..... .img next to adb.exe in platform-tools folder
Download SuperSu here
Copy paste SuperSu zip file in your phone internal storage
In adb cmd enter adb reboot bootloader
Then enter fastboot -i 0x2b4c boot TWRP3.1.0.0_ZUK_Z2_pro.img to boot in TWRP image
Click on "Keep read only"
Go to install and browse to SuperSu zip.
Swipe to install
When installation is finished, reboot your phone (it may reboot many times)
Good job, your phone is now rooted !
Step 5 : Make a Nandroid backup
In adb cmd enter adb reboot bootloader
Then enter fastboot -i 0x2b4c boot TWRP3.1.0.0_ZUK_Z2_pro.img to boot in TWRP image
Go in backup and check all checkbox
Swipe to backup
Reboot the phone
From your computer browse your phone internal memory and copy your backup from TWRP/Backup/XXXXX to a directory in your computer
Step 6 : Install TWRP
In adb cmd enter adb reboot bootloader
Then fastboot flash recovery TWRP3.1.0.0_ZUK_Z2_pro.img to install TWRP on your phone
Then fastboot reboot
Then adb reboot bootloader
Then with volume keys select Recovery Mode and enter in Recovery Mode by pushing power key
TWRP will start
Reboot your phone
Step 7 : Install a custom ROM with TWRP
Download ROM from https://uploadfiles.io/55ffa
Copy paste ROM zip file in your phone internal storage
In adb cmd enter adb reboot bootloader
Then with volume keys select Recovery Mode and enter in Recovery Mode by pushing power key
Click Wipe and swipe to wipe. Do NOT reboot your phone.
Go back in TWRP main menu and click Install. Browse the ROM zip file
Swipe to install
Reboot your phone
When your phone reboot, it's in chinese. Click on the texte in the right bottom corner and then select your language.
During the phone configuration, do not connect wifi (in my case the phone configuration crashed when I connected to a wifi)
When you finished phone configuration reboot to get notification in your language
Step 8 : Install Gapps (google apps)
Download Gapps from https://forum.xda-developers.com/android/software/gapps-dynamic-gapps-t3487192
Copy the zip file in your phone
Reboot in TWRP
Install Gapps through TWRP
Reboot your phone
At this point my Google Play Services crashed each reboot. So needed to
Reboot in TWRP
Wipe cache
Now it works !
You can install other ROM with this method but I only tested with this one.
Enjoy
Click to expand...
Click to collapse
Does it works on Zuk Z2?
dommels said:
I'm currently on ZUI 2.5.x. Can I go straight to official MK60.1 using this guide?
Or should I downgrade to ZUI 2.3.x first
Click to expand...
Click to collapse
You can go straight to the latest RR rom without downgrade, so I guess you can do this with MK60 also. But why do you want that...?
Sendt fra min ZUK Z2121 med Tapatalk
Pendragon2000 said:
Does it works on Zuk Z2?
Click to expand...
Click to collapse
You can use this tutorial BUT you need to take a Z2 ROM and a Z2 TWRP.
Check on xda Z2 topics
accelerometer/gyroscope BUG can`t play any game
Hey Guys. This guide will help you if
1. If Using Custom Rom and want to revert to latest stock rom.
2. If Stock Rom got corrupted or became laggy.
3. You want to reinstall stock rom.
Warning:
1. Method 1 require unlocked bootloader. If you want to unlock then go Here . Method 2 doesn't. Don't worry.
2. This will clean your phone just like new phone.
3. First read the post twice carefully then proceed.
4. ALL .bat FILES TO BE RUN IN FASTBOOT MODE ONLY, IF YOU DON'T KNOW ABOUT FASTBOOT MODE THEN GOOGLE "HOW TO GET FASTBOOT MODE IN ASUS ZENFONE 2
5. I may change name of files in folder. Use common sense to identify them.
Pre-requisites:
1. Charge your phone atleast 60%.
2. Backup any important data you might not wanna loose to either sd card or usb drive or pc.
3. Copy the rom zip in the sd card of your phone. (The one with size in GB)
4. Android USB Driver should be installed already, if it is not then install all drivers in the "Drivers Folder".
5. Enable USB Debugging.
For that go to "Settings" ,Scroll to bottom goto "about", goto "Software Information", tap "Build number" upto 7 times or till it
says "You are a developer now". Then go to "Settings" you will find "Developer Options", open it and enable "USB Debugging"
4. Common sense, patience.
Download Link:
For Method 1
Click here Android Filehost
Download these folders: TWRP, STOCK RECOVERY, STOCK ROM, DRIVERS
For Method 2
https://forum.xda-developers.com/zenfone2/general/z008-z00a-z00d-z00x-raw-fw-collection-t3448966
Procedure:
METHOD 1Step 1. Flash TWRP recovery if not installed by using "TWRP.bat" (Given in twrp folder) in fastboot mode or bootloader mode whatever you call it.
Step 2. Go to Twrp recovery then choose "wipe" then choose "Advance wipe" and tick everything except "SD card or external sd card". then swipe to wipe.
Step 3. Go to fastboot/bootloader mode and flash stock recovery running appropriate .bat file. It is given in "Stock Recovery" folder.
Step 4. When the command executes from the above step, Go to "recovery" by pressing volume down button, then press "power" button.
Step 5. You will see a dead android logo. Nothing else. Then go to stock recovery options.
If you don't know how then use following methods
Method 1:
When you see a dead android bot with an error press and hold power button, then (while holding power button) quickly press Vol up and release and then release power button..
Method 2:
Go to fastboot mode. Connect your device and open command prompt there. Then Type
Code:
fastboot erase cache
Step 6: You should see stock recovery options. Then choose "Update from sd card" and select the rom zip you pasted in SD card.
(If you don't have sd card, then paste rom in internal memory and don't tick "internal storage" in twrp in step 2) But micro
sd is preferable.
Step 7: Wait. Your phone may take 20-30 or more minutes. So leave it on charging.
METHOD 2Step 1: Download and Install all drivers given in download folder. Download RAW firmware for your phone. See above in download links.
Step 2: Install "ASUS FLASH TOOL"
Step 3: Go to fastboot/bootloader mode on your phone. Run asus flash tool, select your phone model and browse for the raw firmware. Check wipe all data. And start the process.
Step 4: Wait for program to say successful. If it takes more than 30 minutes. Disconnect your phone and check phone if rom installed or not.
If this process does not work. Then switch methods.
If you have any questions, problems .. Just Comment it.
Every Suggestion welcomed. Also you can join telegram group to get help and help others.
MOD EDIT: LINK REMOVED
If the guide works for you or you want to thank me for development of tools then you can donate me via
Paypal paypal.me/KapilTapsi (You can donate any amount, It will be of great help)
FAQ
1. Having problems with device connection? like waiting for device.
Sol. Make sure you have enabled USB Debugging (Not applicable for BL Unlocking and TWRP Flashing)
Uninstall all drivers previously installed on computer(every driver of any device)
Reboot your computer. And then install all drivers given in the driver folder.
If the problem persists, try different computer and different usb cable.
2. Facing permission denied in fastboot mode or while running script files.
Sol. Try disabling your lock screen security to none.
File Credits:
1. RealYoti
Would it not be easier to get the stock raw image and just flash it with the asus flash tool?
Sent from my ASUS_Z00A using Tapatalk
kenbo111 said:
Would it not be easier to get the stock raw image and just flash it with the asus flash tool?
Click to expand...
Click to collapse
Thanks for suggestion. But the reasons are
First thing is stock raw image of latest version is very difficult to find.
Second thing sometime asus flash tool stops responding. So you have to wait again for 30 minutes. Also it doesn't show progress sometimes.
Kapil Tapsi said:
Thanks for suggestion. But the reasons are
First thing is stock raw image of latest version is very difficult to find.
Second thing sometime asus flash tool stops responding. So you have to wait again for 30 minutes. Also it doesn't show progress sometimes.
Click to expand...
Click to collapse
No offense meant. But the entire collection of raw files are here: https://forum.xda-developers.com/showthread.php?t=3448966
As long as you have the correct drivers (which you need for your process too) the AFT will get the job done in one easy step.
Sent from my ASUS_Z00A using Tapatalk
kenbo111 said:
No offense meant. But the entire collection of raw files are here: https://forum.xda-developers.com/showthread.php?t=3448966
As long as you have the correct drivers (which you need for your process too) the AFT will get the job done in one easy step.
Click to expand...
Click to collapse
It is a guide only. Users are free to choose from where to download. Thats it. I only shared my collection.
E: footer wrong
E: footer wrong
Installation aborted
I need your help!
I follow the instructions in Method 1 but the device give me this error message when I try to update via SD-card...
May I know whats the solution?
Rom used: Fastboot Rom WW-4.21.40.327
Thank you very much!
kenbo111 said:
No offense meant. But the entire collection of raw files are here: https://forum.xda-developers.com/showthread.php?t=3448966
As long as you have the correct drivers (which you need for your process too) the AFT will get the job done in one easy step.
Sent from my ASUS_Z00A using Tapatalk
Click to expand...
Click to collapse
Thanks, finally got it
Hey...when I get to part 6 I get this Error >>
footer is wrong
signature verification failed
installation aborted
Hey..I also Tried Flashing with the method 2 it was installing but i got an error after
Man, this thread saved my ass. thank you for all your time all!
I have the Asus Zenfone 2 ZE551ML with sound issues, (it's only when the phone rings that the speaker works) and I put it into recovery mode to wipe cache/data, but it got stuck while doing that and I forced it off. But now, it's stuck at the Asus Boot logo with the rotating icon underneath.
Please help!!!!
Hello, my 551ml has stock LP, it's rooted with bootloader unlocked and Xposed installed. If I want to install the latest MM with through the raw flashing tool, should I install the MM bootloader first or it is included into the raw file? Thank
just trying to revert back to locked bootloader and stock recovery once I have wiped all data with twrp and go to bootloader how do I actually flash stock rom noob thanks
stevegtrlmk said:
just trying to revert back to locked bootloader and stock recovery once I have wiped all data with twrp and go to bootloader how do I actually flash stock rom noob thanks
Click to expand...
Click to collapse
use asus flash tool
damn my asus flash tool says error flashing image failure.... (remote not allowed to flash this partion)
ow btw i already bricked it cause it only does boot fastboot lol no more android
how do i flash it back again i need to send the phone back to amazon by 18/05 lol i mean i can just send it back and say also that it wouldnt boot cause i tried to reset it to get my touchscreen to work but yeah lol dont want them to refuse my retour
No way to simple flash the stock rom through/keeping twrp in the device, like I do with other Custom Roms?
Ok. humm, in AFT, it recognize my phone. (there is no OS on it), i choose the good model, i choose the good firmware, but i got this error in a box
"Can't open file 'SERIALNUMBER_frp_request_server_log.txt' (error 5:denied access)" i can only press OK
and now the button under "state" is red and under description, it's " check the detected serial number failure (not found the device of "SERIALNUMBER") "
you understand the i've replace the real serial number by SERIALNUMBER in those lines.
Anyone ever had this problem?
euphrodil said:
Ok. humm, in AFT, it recognize my phone. (there is no OS on it), i choose the good model, i choose the good firmware, but i got this error in a box
"Can't open file 'SERIALNUMBER_frp_request_server_log.txt' (error 5:denied access)" i can only press OK
and now the button under "state" is red and under description, it's " check the detected serial number failure (not found the device of "SERIALNUMBER") "
you understand the i've replace the real serial number by SERIALNUMBER in those lines.
Anyone ever had this problem?
Click to expand...
Click to collapse
Try manual flashing then. Not the aft flashing
Sent from my MI MAX 2 using Tapatalk
Kapil Tapsi said:
Try manual flashing then. Not the aft flashing
Sent from my MI MAX 2 using Tapatalk
Click to expand...
Click to collapse
Ok thanks, i'll look for a thread that explain this.
euphrodil said:
Ok thanks, i'll look for a thread that explain this.
Click to expand...
Click to collapse
did you find any?
i want to remove the lineageos and install latest stock LP but i have no clue how to do it