Need Stock rom for micromax A120 4GB model urgent. - Micromax A120 Canvas 2 Colors

My phone was running well but last night all of sudden it went in boot loop. CWM Recovery is showing E:can't mount error and I am not able to flash any rom using CWM recovery.
I searched for stock rom and found out some but I am not sure about which rom to flash using sp flash tool.
My device was running on FOTA KK by Umang.
On the back side of the device, S/W version is 11.
Please find attachment and help me out.

muraliprajapati said:
My phone was running well but last night all of sudden it went in boot loop. CWM Recovery is showing E:can't mount error and I am not able to flash any rom using CWM recovery.
I searched for stock rom and found out some but I am not sure about which rom to flash using sp flash tool.
My device was running on FOTA KK by Umang.
On the back side of the device, S/W version is 11.
Please find attachment and help me out.
Click to expand...
Click to collapse
Flash this stock rom using SP flash tools. (Make sure to install the mtk drivers first)
https://drive.google.com/file/d/0B8HspVLwTTxtU1lrNXBOekhLbUk
Do hit thanks.

sujoyspeedex said:
Flash this stock rom using SP flash tools. (Make sure to install the mtk drivers first)
https://drive.google.com/file/d/0B8HspVLwTTxtU1lrNXBOekhLbUk
Do hit thanks.
Click to expand...
Click to collapse
It is JB or KK?

sujoyspeedex said:
Flash this stock rom using SP flash tools. (Make sure to install the mtk drivers first)
https://drive.google.com/file/d/0B8HspVLwTTxtU1lrNXBOekhLbUk
Do hit thanks.
Click to expand...
Click to collapse
It is JB or KK?
Please give me link of drivers for Windows 10.

muraliprajapati said:
It is JB or KK?
Please give me link of drivers for Windows 10.
Click to expand...
Click to collapse
Jellybean.
Follow the instructions in this link for installing drivers :
http://forum.xda-developers.com/elephone-m2/help/windows-10-mtk-vcom-usb-drivers-32-64-t3267033

sujoyspeedex said:
Jellybean.
Follow the instructions in this link for installing drivers :
http://forum.xda-developers.com/elephone-m2/help/windows-10-mtk-vcom-usb-drivers-32-64-t3267033
Click to expand...
Click to collapse
I tried to flash the stock rom but sp flash tool says PMT has changed it must be downloaded.
What should i do?

muraliprajapati said:
I tried to flash the stock rom but sp flash tool says PMT has changed it must be downloaded.
What should i do?
Click to expand...
Click to collapse
Open SP flash tools, click on format tab, make sure "Format everything except bootloader" is CHECKED. Click format then connect your switched off phone via USB cable, after format is complete, pull out USB and click on download tab, load the scatter file and use secro.img for Cache and Userdata. Download should now commence.
After download is complete pull out cable and boot into recovery mode first. You'll see a broken android logo, press the power button once and you'll see recovery options. Perform a factory reset then boot system. Be patient first boot can take up to 15 minutes.
Hit thanks if it helps.

sujoyspeedex said:
Open SP flash tools, click on format tab, make sure "Format everything except bootloader" is CHECKED. Click format then connect your switched off phone via USB cable, after format is complete, pull out USB and click on download tab, load the scatter file and use secro.img for Cache and Userdata. Download should now commence.
After download is complete pull out cable and boot into recovery mode first. You'll see a broken android logo, press the power button once and you'll see recovery options. Perform a factory reset then boot system. Be patient first boot can take up to 15 minutes.
Hit thanks if it helps.
Click to expand...
Click to collapse
I read on XDA that formatting will make phone dead and it won't be detected by computer so I am afraid that it will potentially brick my phone.

muraliprajapati said:
I read on XDA that formatting will make phone dead and it won't be detected by computer so I am afraid that it will potentially brick my phone.
Click to expand...
Click to collapse
That's why I said, make sure "Format everything except bootloader is CHECKED". As long as your bootloader is intact, your phone will always connect to the computer.
And I wouldn't be suggesting something if I didn't do it myself.

sujoyspeedex said:
That's why I said, make sure "Format everything except bootloader is CHECKED". As long as your bootloader is intact, your phone will always connect to the computer.
And I wouldn't be suggesting something if I didn't do it myself.
Click to expand...
Click to collapse
Can I flash Stock kitkat on my device? Please have a look here.

muraliprajapati said:
Can I flash Stock kitkat on my device? Please have a look here.
Click to expand...
Click to collapse
Of course you can! But if you wish to flash custom ROMS in the future, I'd suggest you flash Wiko Rainbow V13. Most of the custom ROMS require Wiko base.

sujoyspeedex said:
Of course you can! But if you wish to flash custom ROMS in the future, I'd suggest you flash Wiko Rainbow V13. Most of the custom ROMS require Wiko base.
Click to expand...
Click to collapse
I want to flash that rom just to get my phone in working condition. That rom is for V6 and mine is V10. Will it work?

muraliprajapati said:
I want to flash that rom just to get my phone in working condition. That rom is for V6 and mine is V10. Will it work?
Click to expand...
Click to collapse
FOTA Kitkat?
Regardless of what it was, this ROM is built for MT6582, and it will work. Make sure to select secro.img for Cache and userdata.
SpEeDeX^

Related

stock at google page...please help

I tried to root my new nexus s that i got last friday.....
tey must be some thread about this but my english is not in top shape...
i am now stuck at google page when turning on my phone. must be something about my boot....
I live in Canada and my provider is roger here all the information that i found :
in fastboot mode:
product name: herring
hw version : rev 16
bootloader version : i9020xxka3
baseband version : i9020uckb2
carrier info : att
on my box:
model: gt-i9020fsrrwc
Please i realy need help.....
Vbob
Describe steps you have taken to root in detail.
i know this is not the right place to start, but i did't know....
hxxp://nexusshacks.com/nexus-s-hacks/how-to-root-nexus-s/
i was stock after "fastboot flash boot rootboot.img" i was ubable to reboot
Vbob
any one can help me?
Vbob
Download this first
http://www.mediafire.com/?0pzz830oc0xa0e7
Rename it to rootboot.img and overwrite the one in C:\nexusroot
Try
Code:
fastboot flash boot rootboot.img
again.
ok did it now wen i boot the phone i always get into clockworldmod recovery v3.0.2.5
i want to make sure i dont do something bad, what should i do?
Vbob
thanks for helping me ....
i finely found the way. i have push a update and it work
Thank
by the way, juste to be shure, can you point me to the right way of rooting my phone?
Vbob
im having the same problem with mine.....but where i messed up is that i didnt back anything up after unlocking and now i pretty much have a blank sd card/internal memory.....i have tried lots of methods trying to push a recovery into the phone but nothing has worked
im glad this worked for you
vbobmac said:
thanks for helping me ....
i finely found the way. i have push a update and it work
Thank
by the way, juste to be shure, can you point me to the right way of rooting my phone?
Vbob
Click to expand...
Click to collapse
If you can get into CWM, you only need two more steps now
1) mount /system
2) install zip from sd -> su-2.3.6.1-ef-signed.zip
Reboot and you are rooted.
redlilcivic said:
im having the same problem with mine.....but where i messed up is that i didnt back anything up after unlocking and now i pretty much have a blank sd card/internal memory.....i have tried lots of methods trying to push a recovery into the phone but nothing has worked
im glad this worked for you
Click to expand...
Click to collapse
You need to describe the steps you have taken, and describe the problem with more detail.
If you can get into CWM, you only need two more steps now
1) mount /system
2) install zip from sd -> su-2.3.6.1-ef-signed.zip
Reboot and you are rooted.
Click to expand...
Click to collapse
i did a update yesterday, and now i think i dont have the right system recovery.
now when clicking system recovery, i get a "!" whit the android character...
vbobmac said:
ok did it now wen i boot the phone i always get into clockworldmod recovery v3.0.2.5
i want to make sure i dont do something bad, what should i do?
Vbob
Click to expand...
Click to collapse
Please, I have exactly the same problem. When I boot the phone i always get into clockworldmod recovery v3.0.2.5
How Can I do To unmake this?
Please, somebody can help?
[email protected]_OC said:
Please, I have exactly the same problem. When I boot the phone i always get into clockworldmod recovery v3.0.2.5
How Can I do To unmake this?
Please, somebody can help?
Click to expand...
Click to collapse
So instead of booting into the rom you boot into clockwork recovery?
Sent from my Nexus S using XDA Premium App
reddv1 said:
So instead of booting into the rom you boot into clockwork recovery?
Sent from my Nexus S using XDA Premium App
Click to expand...
Click to collapse
Yes I follow the root technique of "hxxp://nexusshacks.com/nexus-s-hacks/how-to-root-nexus-s/", and, like "vbobmac", my phone stock at google page.
After that, i try the "rootboot.img" who give "Si_NZ" to "vbobmac".
And, like him, after that when i boot, i can only boot into clockwork recovery, and i can't go into "bootloader" mode.
Can I make my rom at stock into clockwork recovery?
I hope, it's possible to unmake this mistake?
In the post "[ROM] Stock - 2.3.4 - GRJ22 - Deodexed w/radio for NS/NS4G", do i have to take a rom rooted or not? Because my phone is unlock, but not totally rooted i think.
Sorry for all those questions, but i'm a little lost. And i'm affraid to make an error who will kill my Nexus S.
Thank you a lot for your help, i wait your answer before doing anything.
Thank you again.
It's great to see people, who are ready to help directly.
Edit: Now I can boot in "bootloader" mode, but i try with ODIN to put back at stock my phone, but the computer (Windows 7) dont recognise the phSamsungone.
Even when I install PC Studio 3.
Do you now an other way to make my phone work? Root or at stock, doesn't matter. Just if he can live, it's good to me.
[email protected]_OC said:
Yes I follow the root technique of "hxxp://nexusshacks.com/nexus-s-hacks/how-to-root-nexus-s/", and, like "vbobmac", my phone stock at google page.
After that, i try the "rootboot.img" who give "Si_NZ" to "vbobmac".
And, like him, after that when i boot, i can only boot into clockwork recovery, and i can't go into "bootloader" mode.
Can I make my rom at stock into clockwork recovery?
I hope, it's possible to unmake this mistake?
In the post "[ROM] Stock - 2.3.4 - GRJ22 - Deodexed w/radio for NS/NS4G", do i have to take a rom rooted or not? Because my phone is unlock, but not totally rooted i think.
Sorry for all those questions, but i'm a little lost. And i'm affraid to make an error who will kill my Nexus S.
Thank you a lot for your help, i wait your answer before doing anything.
Thank you again.
It's great to see people, who are ready to help directly.
Edit: Now I can boot in "bootloader" mode, but i try with ODIN to put back at stock my phone, but the computer (Windows 7) dont recognise the phSamsungone.
Even when I install PC Studio 3.
Do you now an other way to make my phone work? Root or at stock, doesn't matter. Just if he can live, it's good to me.
Click to expand...
Click to collapse
Can you access the sdcard to flash a rom? You can do that by going to clockwork recovery, then mounts and storage, then select mount USB storage, then on your PC go to my computer and press refresh until you see the phone storage appear, keep pressing refresh for atleast 5 minutes because sometimes it takes a while. Then download any rom rooted or unrooted and flash in clockwork recovery.
If you can't do that and you can use fastboot, I'll send you a system.img and boot.img to flash.
Sent from my Nexus S using XDA Premium App
reddv1 said:
Can you access the sdcard to flash a rom? You can do that by going to clockwork recovery, then mounts and storage, then select mount USB storage, then on your PC go to my computer and press refresh until you see the phone storage appear, keep pressing refresh for atleast 5 minutes because sometimes it takes a while. Then download any rom rooted or unrooted and flash in clockwork recovery.
If you can't do that and you can use fastboot, I'll send you a system.img and boot.img to flash.
Sent from my Nexus S using XDA Premium App
Click to expand...
Click to collapse
Yes, i can mount my phone, but when i try to install the default rom, but it's not working. I have an error.
At least the manipulation is working, i can mount on my computer the nexus.
Do you have a rom 2.3.4 for Nexus i9023 please? Maybe i don't flash with a good rom?
Thanks again for your help.
I try again, to flash with the original 2.3.4, but the operation abort everytime.
Do i have an other choice for flashing my phone?
Mount the sdcard is working, copy files work too, and i can run the update.
But, the operation abort with a "statut 7".
[email protected]_OC said:
I try again, to flash with the original 2.3.4, but the operation abort everytime.
Do i have an other choice for flashing my phone?
Mount the sdcard is working, copy files work too, and i can run the update.
But, the operation abort with a "statut 7".
Click to expand...
Click to collapse
You have try and use a new recovery. Download this recovery http://forum.xda-developers.com/showthread.php?t=988686 and flash it in the bootloader and try flashing a rom again.
Sent from my Nexus S using XDA Premium App
reddv1 said:
You have try and use a new recovery. Download this recovery http://forum.xda-developers.com/showthread.php?t=988686 and flash it in the bootloader and try flashing a rom again.
Sent from my Nexus S using XDA Premium App
Click to expand...
Click to collapse
I flash, like the first time, from Windows "cmd"?
Sorry for all those questions, but i don't want to make something who can kill my phone.
And I think, i don't have the good bootloader.
My phone is a Nexus S i9023, but since i try to root my phone, my bootloader version is the "i9020XXKA3".
You think, i have to change the bootloader first?
For flashing bootloader and clocwork recovery, i have to do it from Windows?
Waiting for your answer.
Thank's a lot
[email protected]_OC said:
I flash, like the first time, from Windows "cmd"?
Sorry for all those questions, but i don't want to make something who can kill my phone.
Click to expand...
Click to collapse
Yes, from cmd, type "fastboot flash recovery recoveryname.img" , replace "recoveryname.img" with what it's named. Good luck.
Sent from my Nexus S using XDA Premium App
reddv1 said:
Yes, from cmd, type "fastboot flash recovery recoveryname.img" , replace "recoveryname.img" with what it's named. Good luck.
Sent from my Nexus S using XDA Premium App
Click to expand...
Click to collapse
I flash the recovery, and now i have the v4.0.0.2, but i still can't flash a rom.
I still have the same message:
"assert failed: file_getprop("/system/build.prop". "ro.build.fingerprint") == "google/soju/crespo:2.3.2/GRH78C/93600:user/release-keys" ||
file_getprop("/system/build.prop". "ro.build.fingerprint") == "google/soju/crespo:2.3.3/GRI40/102588:user/release-keys"
E: Error in /sdcard/update 2.3.3.zip
(Statut 7)
Installation aborted.
Don't you think it's because my bootloader is not the good one?
Can flash it too, from Windows?

Accidentally wiped OS from phone

I accidentally wiped my OS from my phone when I wasn't paying attention. All recoveries wiped as well. It will not boot past startup screen. Odin v3.07 and 3.09 both display FAIL when I try to flash the stock ROM back. I am using a G900P. Help?
How do you accidentally wipe an OS from a phone?
You're putting the phone in download mode for ODIN right?
*Detection* said:
How do you accidentally wipe an OS from a phone?
You're putting the phone in download mode for ODIN right?
Click to expand...
Click to collapse
Yes. It recognizes my phone as plugged in but keeps displaying a FAIL message when flashing, Also I'm running Android 5.0.
Try this
http://forum.xda-developers.com/spr...in-sm-g900p-oa6-official-restore-rom-t3022826
If you're putting your phone into Download Mode you should be able to flash a custom recovery onto it (such as TWRP - the one I personally use.)
Try flashing that onto your device then flash a ROM through TWRP - You can mount your phone and SD card onto a PC through this, allowing for you to access the devices file system here.
Then, if you really wanted to, you can go through Samsung Kies on your PC and restore back to the original TouchWiz ROM from Samsung. It'll ask you to verify your device and ask you to put it into download mode but not sure if you'd want to go back to stock.
If you need any more help, just ask here and I'll give you a hand.
Exvious said:
If you're putting your phone into Download Mode you should be able to flash a custom recovery onto it (such as TWRP - the one I personally use.)
Try flashing that onto your device then flash a ROM through TWRP - You can mount your phone and SD card onto a PC through this, allowing for you to access the devices file system here.
Then, if you really wanted to, you can go through Samsung Kies on your PC and restore back to the original TouchWiz ROM from Samsung. It'll ask you to verify your device and ask you to put it into download mode but not sure if you'd want to go back to stock.
If you need any more help, just ask here and I'll give you a hand.
Click to expand...
Click to collapse
I'm going to try the Mounting method but I don't exactly understand the process.
limitedsound said:
I'm going to try the Mounting method but I don't exactly understand the process.
Click to expand...
Click to collapse
It's quite basic, you simply just go into TWRP and select what you want to be mounted to the computer from the custom recovery. If you need more help here, just let me know.
- Removed False Content -
Exvious said:
It's quite basic, you simply just go into TWRP and select what you want to be mounted to the computer from the custom recovery. If you need more help here, just let me know.
Also, in download mode I'm not sure if you can access the devices file system through Windows / OS X - Never tried, but I'm assuming it works - Don't quote me on that tho haha.
Click to expand...
Click to collapse
No, that's what ADB is for, but the device needs to be booted for ADB, download mode is just for flashing with ODIN
*Detection* said:
No, that's what ADB is for, but the device needs to be booted for ADB, download mode is just for flashing with ODIN
Click to expand...
Click to collapse
Right - Thanks for the correction.
How exactly do I use ADB to mount?
limitedsound said:
How exactly do I use ADB to mount?
Click to expand...
Click to collapse
If you wiped the OS, you have no reason for adb
Use my link to flash a rom, or use ODIN and a stock rom
*Detection* said:
If you wiped the OS, you have no reason for adb
Use my link to flash a rom, or use ODIN and a stock rom
Click to expand...
Click to collapse
Yeah Detection Odin is still displaying FAIL messages for the ROM you linked me to.
limitedsound said:
Yeah Detection Odin is still displaying FAIL messages for the ROM you linked me to.
Click to expand...
Click to collapse
What exactly did you do to 'accidentally' wipe the OS?
*Detection* said:
What exactly did you do to 'accidentally' wipe the OS?
Click to expand...
Click to collapse
I was wiping something in TWRP and I apparently checked the "System" button.
You still have TWRP working?
Flash a custom ROM

Zuk z1 stuck with teamwin recovery after clean wipe

hello,
so i was installing cm13 while installing i wiped entire partition(data,including system)
now i can only boot into recovery , i installed cm13, cm-12.1-YOG4PAS9IG-ham-signed-d4fc2c5394 , after installing if i reboot it will again go to reovery only wont boot into phone..
please help
thank you
ancilary said:
i installed cm13, cm-12.1-YOG4PAS9IG-ham-signed-d4fc2c5394 , after installing ..
Click to expand...
Click to collapse
That's doesn't make sense, can you explain what it means? Which recovery, which rom was installed and was working? You wipes system and data, ok. What did you do then?
strongst said:
That's doesn't make sense, can you explain what it means? Which recovery, which rom was installed and was working? You wipes system and data, ok. What did you do then?
Click to expand...
Click to collapse
hi , thanks for reply
i was using nought rom 7.0 & TEAMWIN recovery
i performed wipe ( data , cache , system , internal storage)
then installed cm13
it booted only to recovery , after that i tried flashing different rom , no use everytime it goes only to recovery..
What's with your other request? http://forum.xda-developers.com/zuk-z1/help/how-to-make-device-stock-t3515921
You need cm13 or stock rom? It's annoying to open several threads..
strongst said:
What's with your other request? http://forum.xda-developers.com/zuk-z1/help/how-to-make-device-stock-t3515921
You need cm13 or stock rom? It's annoying to open several threads..
Click to expand...
Click to collapse
that was different but i tried this and now im stuck here
ancilary said:
that was different but i tried this and now im stuck here
Click to expand...
Click to collapse
And what you need is a running cm13 now?
strongst said:
And what you need is a running cm13 now?
Click to expand...
Click to collapse
ya running cm or any other rom is fine..
ancilary said:
ya running cm or any other rom is fine..
Click to expand...
Click to collapse
seems you don't know what you need cm isn't the same as cos, the difference is huge.
For cos12.1 stock rom you can get it here http://forum.xda-developers.com/zuk-z1/help/how-to-make-device-stock-t3515921/post70007487
Flash it with all in one tool, it's the easiest way.
Cm13 you can flash it though twrp.
strongst said:
seems you don't know what you need cm isn't the same as cos, the difference is huge.
For cos12.1 stock rom you can get it here http://forum.xda-developers.com/zuk-z1/help/how-to-make-device-stock-t3515921/post70007487
Flash it with all in one tool, it's the easiest way.
Cm13 you can flash it though twrp.
Click to expand...
Click to collapse
i flashed cm-12.1-YOG4PAS3AJ-ham-signed.zip with twrp still i get booted to recovery only
ancilary said:
i flashed cm-12.1-YOG4PAS3AJ-ham-signed.zip with twrp still i get booted to recovery only
Click to expand...
Click to collapse
You didn't understand or read my post... You need to flash stock firmware with fastboot. I didn't wrote flash it with twrp.
Use the all in one tool. It's called so, because you can do all with it. Like downloading stock rom and flash it :good:
strongst said:
You didn't understand or read my post... You need to flash stock firmware with fastboot. I didn't wrote flash it with twrp.
Use the all in one tool. It's called so, because you can do all with it. Like downloading stock rom and flash it :good:
Click to expand...
Click to collapse
i tried flashing stock recovery using All in one tool but now its not booting to recovery only
ancilary said:
i tried flashing stock recovery using All in one tool but now its not booting to recovery only
Click to expand...
Click to collapse
Sorry mate, why you do that? It said to flash stock rom with all in one tool, not stock recovery
strongst said:
Sorry mate, why you do that? It said to flash stock rom with all in one tool, not stock recovery
Click to expand...
Click to collapse
i read it as recovery my bad...
now i cannot boot into recovery/fastboot.
powers on rarely too just shows zuk logo and goes off
ancilary said:
i read it as recovery my bad...
now i cannot boot into recovery/fastboot.
powers on rarely too just shows zuk logo and goes off
Click to expand...
Click to collapse
Use all in one tool to boot into bootloader. Read carefully or your next step is qfil method
Here's a good guide in case you're don't get it through aoi tool: http://forum.xda-developers.com/zuk-z1/general/qpst-method-how-to-unbrick-to-stock-t3506833
But better to check again if you can flash stock cos rom with tool
strongst said:
Use all in one tool to boot into bootloader. Read carefully or your next step is qfil method
Here's a good guide in case you're don't get it through aoi tool: http://forum.xda-developers.com/zuk-z1/general/qpst-method-how-to-unbrick-to-stock-t3506833
But better to check again if you can flash stock cos rom with tool
Click to expand...
Click to collapse
Nothing is happening in phone , no respone for any button press . its wont turn on also now
ancilary said:
Nothing is happening in phone , no respone for any button press . its wont turn on also now
Click to expand...
Click to collapse
Can you charge it?

[HELP] Moto G PLus 4 booting only in recovery, not system

Hi,
I just unlocked the bootloader of my Moto G Plus 4 via adb, and after that I switched it on, it worked fine and I transferred SuperUser.zip into my phone's internal memory, and then tried to flash it through recovery, (following the sleps I read somewhere), since then my phone is not rebooting - it is rebooting into bootloader and I can enter recovery as well, but Im not able to reboot my phone. The device is being detected via adb when it is in recovery mode, but not in bootloader. Is this issue fixable? Please help me fix this.
EDIT: I forgot to mention, I'm not getting the boot animation as well. I press the power key and nothing at all happens.
d1nesh said:
Hi,
I just unlocked the bootloader of my Moto G Plus 4 via adb, and after that I switched it on, it worked fine and I transferred SuperUser.zip into my phone's internal memory, and then tried to flash it through recovery, (following the sleps I read somewhere), since then my phone is not rebooting - it is rebooting into bootloader and I can enter recovery as well, but Im not able to reboot my phone. The device is being detected via adb when it is in recovery mode, but not in bootloader. Is this issue fixable? Please help me fix this.
Click to expand...
Click to collapse
You got into bootloop, just download the stock ROM and then flash it again, follow any guide over XDA or see YouTube for more help. Flash ROM without locking bootloader will be good.
Sent from my Moto G4 Plus using Tapatalk
avirk said:
You got into bootloop, just download the stock ROM and then flash it again, follow any guide over XDA or see YouTube for more help. Flash ROM without locking bootloader will be good.
Sent from my Moto G4 Plus using Tapatalk
Click to expand...
Click to collapse
I forgot to mention, I'm not getting the bootanimation as well, I press the power button and nothing at all happens.
d1nesh said:
I forgot to mention, I'm not getting the bootanimation as well, I press the power button and nothing at all happens.
Click to expand...
Click to collapse
Yes that is what happen after unlocking Boot loader, just flash the stock ROM using any tutorial over XDA without locking the boot loader and then follow the proper instructions to root your mobile. Rooting is very easy on Android N. So I will say flash android N and then proceed.
Sent from my Moto G4 Plus using Tapatalk
avirk said:
Yes that is what happen after unlocking Boot loader, just flash the stock ROM using any tutorial over XDA without locking the boot loader and then follow the proper instructions to root your mobile. Rooting is very easy on Android N. So I will say flash android N and then proceed.
Sent from my Moto G4 Plus using Tapatalk
Click to expand...
Click to collapse
DO you mind posting the link to the proper article, since phone is not being detected via adb as well.
d1nesh said:
DO you mind posting the link to the proper article, since phone is not being detected via adb as well.
Click to expand...
Click to collapse
First thing, your query doesn't belong to the development thread. It should had been created in "Questions and Answers"
Second thing, if you flash supersu on stock rom it won't boot due some security measures of Moto. Instead flash ElementalX kernel first and then flash supersu.
d1nesh said:
DO you mind posting the link to the proper article, since phone is not being detected via adb as well.
Click to expand...
Click to collapse
All information that you will need can be found here. https://forum.xda-developers.com/moto-g4-plus/how-to/moto-g4-plus-xt1640-43-athene-npj25-93-t3549369
For the latest stock nougat firmware for XT1643 check this link https://mega.nz/#!ystC2ZSL!ql6cyC5v5RgLQfo7G44mhi7Ng-AQBvtsouKxKinbHi8
If you have some confusion about flashing, be sure to check it out before going on. I believe you have some knowledge about fastboot and using it.
==vj== said:
First thing, your query doesn't belong to the development thread. It should had been created in "Questions and Answers"
Second thing, if you flash supersu on stock rom it won't boot due some security measures of Moto. Instead flash ElementalX kernel first and then flash supersu.
Click to expand...
Click to collapse
i'm really sorry about posting in wrong thread.
While trying to flash ElementalX kernel through memory card, I'm getting error: Zip signature verification failed, (in red).
nazim7 said:
All information that you will need can be found here. https://forum.xda-developers.com/moto-g4-plus/how-to/moto-g4-plus-xt1640-43-athene-npj25-93-t3549369
For the latest stock nougat firmware for XT1643 check this link https://mega.nz/#!ystC2ZSL!ql6cyC5v5RgLQfo7G44mhi7Ng-AQBvtsouKxKinbHi8
If you have some confusion about flashing, be sure to check it out before going on. I believe you have some knowledge about fastboot and using it.
Click to expand...
Click to collapse
Last time I used fastboot was more than one year ago. Also, my device is not being detected by adb when in bootloader.
d1nesh said:
DO you mind posting the link to the proper article, since phone is not being detected via adb as well.
Click to expand...
Click to collapse
You can try one thing if you have twrp and your phone is booting into recovery then do this.
Download any custom rom based on Android N, don't go with RR for now as it is not for newbie cause new build has some issue while flashing.
Download the gapps recommend the opengapps Nano package from the opengapps.org.
Place both zip on your sd card and boot into recovery and then wipe everything like, system, dalvik cache, cache, system and then install the both zip, first rom and then install gapps. Then reboot. I hope it will fix the bootloop issue.
d1nesh said:
Last time I used fastboot was more than one year ago. Also, my device is not being detected by adb when in bootloader.
Click to expand...
Click to collapse
What did you mean by your device not being detected in bootloader mode. Did you install the right drivers. Did you install minimal adb and fastboot. Can you do the below steps and tell me the result.
1. Download the drivers from here.
For Windows: http://www.devfiles.co/download/5eEx...ager_2.5.4.exe
2. Download the Minimal ADB and Fastboot = https://www.androidfilehost.com/?fid=745425885120698566
3. Install Minimal ADB and Fastboot = https://forum.xda-developers.com/sho....php?t=2317790
4. Restart the Moto G4 in fastboot mode. (Bootloader mode)
5. Connect the Phone to the computer.
6. In adb fastboot folder shift+right click and then in the pop up click "open command window here"
7. In the command line type: "fastboot devices"
Seeing your serial number means we know all is good and your phone is connected and you can go on flash the stock firmware. If the serial number is not showing, the drivers are not properly installed.
---------- Post added at 01:33 PM ---------- Previous post was at 01:25 PM ----------
avirk said:
You can try one thing if you have twrp and your phone is booting into recovery then do this.
Download any custom rom based on Android N, don't go with RR for now as it is not for newbie cause new build has some issue while flashing.
Download the gapps recommend the opengapps Nano package from the opengapps.org.
Place both zip on your sd card and boot into recovery and then wipe everything like, system, dalvik cache, cache, system and then install the both zip, first rom and then install gapps. Then reboot. I hope it will fix the bootloop issue.
Click to expand...
Click to collapse
I thought he don't have TWRP installed. If TWRP is installed, then go on with what he said. That is the best solution for you. :good:
avirk said:
You can try one thing if you have twrp and your phone is booting into recovery then do this.
Download any custom rom based on Android N, don't go with RR for now as it is not for newbie cause new build has some issue while flashing.
Download the gapps recommend the opengapps Nano package from the opengapps.org.
Place both zip on your sd card and boot into recovery and then wipe everything like, system, dalvik cache, cache, system and then install the both zip, first rom and then install gapps. Then reboot. I hope it will fix the bootloop issue.
Click to expand...
Click to collapse
I tried the same, but the flashing process is stuck on "Patching system image unconditionally..." I tried two different ROMs, and in both cases, it is stuck in the same step
d1nesh said:
I tried the same, but the flashing process is stuck on "Patching system image unconditionally..." I tried two different ROMs, and in both cases, it is stuck in the same step
Click to expand...
Click to collapse
Try with wiping everything, wipe system and internal storage as well, I know your important data will be gone but it will be worth a try. If anything comes up let us know, also what have you tried so far tell us in details so we don't repeat it over and over, also in above post some links are provided try them.
avirk said:
Try with wiping everything, wipe system and internal storage as well, I know your important data will be gone but it will be worth a try. If anything comes up let us know, also what have you tried so far tell us in details so we don't repeat it over and over, also in above post some links are provided try them.
Click to expand...
Click to collapse
I had tried wiping everything already, still I'm getting this error.
Also i'm getting one more error: Unable to load "/system".
d1nesh said:
I had tried wiping everything already, still I'm getting this error.
Also i'm getting one more error: Unable to load "/system".
Click to expand...
Click to collapse
Try with other pc or change the port for data cable. It seems your system partition got corrupted, also you can mount system partition under twrp and then try to format it.
d1nesh said:
I had tried wiping everything already, still I'm getting this error.
Also i'm getting one more error: Unable to load "/system".
Click to expand...
Click to collapse
When in TWRP, go to Mount and see if system is ticked or not. If not, mount the system and wipe it. Then flash the rom again. BTW which TWRP version are you using. From where you get it.
nazim7 said:
When in TWRP, go to Mount and see if system is ticked or not. If not, mount the system and wipe it. Then flash the rom again. BTW which TWRP version are you using. From where you get it.
Click to expand...
Click to collapse
System is not ticked when i go to Mount, neither am I able to tick it. BTW, I have twrp-3.0.2-0-athene.img.
d1nesh said:
System is not ticked when i go to Mount, neither am I able to tick it. BTW, I have twrp-3.0.2-0-athene.img.
Click to expand...
Click to collapse
So that is the problem. You have to install TWRP latest version. Version 3.0.2 r4 or higher by shreps will work for you. You can find it here. https://forum.xda-developers.com/mo...covery-twrp-3-0-2-r3-moto-g4-g4-plus-t3494337
The latest version is 3.0.3 n4. Flash it, mount the system and everything will be good for you
d1nesh said:
System is not ticked when i go to Mount, neither am I able to tick it. BTW, I have twrp-3.0.2-0-athene.img.
Click to expand...
Click to collapse
As @nazim7 suggested you to flash the latest TWRP and then try to flash the rom again, also you can try to resize the partition and try to format it from twrp from the option in twrp. Just let us know what the result come back.
nazim7 said:
So that is the problem. You have to install TWRP latest version. Version 3.0.2 r4 or higher by shreps will work for you. You can find it here. https://forum.xda-developers.com/mo...covery-twrp-3-0-2-r3-moto-g4-g4-plus-t3494337
The latest version is 3.0.3 n4. Flash it, mount the system and everything will be good for you
Click to expand...
Click to collapse
There's one more problem like I've mentioned previously. I have the latest drivers even then the device is not being detected via adb when in bootloader, but as soon as I boot into recovery, the device shows up on adb after command. How do I flash the recovery if the device doesn't show up in bootloader on adb?

Baseband file for XT1643 (ATHENE_INDIA) needed

No network on any ROM (stock & LOS-based ROMs). I might have flashed the wrong baseband file, can someone please give me the baseband specifically for India? Baseband required - M8952_70030.25.03.62.01R ATHENE_INDIA_DSDS_CUST
meraj99 said:
I'm on RR Remix N and have TWRP 3.1.1 shreps for the recovery. I can flash RR without any issues but whenever I try flashing either a JX series ROM or a fully stock ROM, TWRP says 'Invalid Zip File Format'. I have access to both bootloader and recovery, everything else works fine. Can someone please guide me on what to do? Do I have to sideload the ROM via ADB? If so, please enlighten me about the procedure
Click to expand...
Click to collapse
Why not trying to reflash the twrp(may try another one from official website or of silesh nair on his thread).
I think you might have turn on md5 checksum or another this which keeps verifying the zip and no signature is found.
Reflashing is a good course as it do not erase any data of yours.
DgnrtnX said:
Why not trying to reflash the twrp(may try another one from official website or of silesh nair on his thread).
I think you might have turn on md5 checksum or another this which keeps verifying the zip and no signature is found.
Reflashing is a good course as it do not erase any data of yours.
Click to expand...
Click to collapse
I used 3 different versions of TWRP Still didn't help. And the MD5 checksums matched, zip signature verification has been disabled too
meraj99 said:
I used 3 different versions of TWRP [emoji14] Still didn't help. And the MD5 checksums matched, zip signature verification has been disabled too
Click to expand...
Click to collapse
Try this and report. After installing wipe cache, dalvik.
If flashing recovery is problem, reflash stock rom w/ stock recovery n boot ans try again to flash twrp, might sovle the issue
Link : https://drive.google.com/file/d/1EGS-uU1QBDbrP3G4lFUSVqDSHC_ZGpMR/view?usp=sharing
Sent from my Moto G4 Plus using Tapatalk
DgnrtnX said:
Try this and report. After installing wipe cache, dalvik.
If flashing recovery is problem, reflash stock rom w/ stock recovery n boot ans try again to flash twrp, might sovle the issue
Link : https://drive.google.com/file/d/1EGS-uU1QBDbrP3G4lFUSVqDSHC_ZGpMR/view?usp=sharing
Sent from my Moto G4 Plus using Tapatalk
Click to expand...
Click to collapse
can you please tell me how to use the stock recovery? It just says 'No Command' everytime I boot into it
meraj99 said:
can you please tell me how to use the stock recovery? It just says 'No Command' everytime I boot into it
Click to expand...
Click to collapse
Its power button followed by vol up, but hey that recovery ain't gonna help you. Im just saying you to reflash it as it will erase all the data of current twrp recovery which might interfere with another recovery(changes are negligible, but then too).
I gave you link to a 64-bit twrp made by dreamester and silesh nair. Try it and see if it works.
You can not flash stock ROM from TWRP or other custom recovery. You need a PC with Moto Drivers and fastboot tools installed. Then you have to flash the stock rom from fastboot (generally instructions are given inside rom zip in a file called 'flashfile.xml'). I can't say about flashing JX series ROM (maybe it needs you to be on stock first or something like that) but here are the files needed to install Motorola ADB and FASTBOOT drivers and ADB & FASTBOOT tools on windows pc:
https://firmware.center/software/Android/platform-tools/win/ and https://firmware.center/software/Motorola/
---------- Post added at 10:15 PM ---------- Previous post was at 10:11 PM ----------
meraj99 said:
can you please tell me how to use the stock recovery? It just says 'No Command' everytime I boot into it
Click to expand...
Click to collapse
To get into stock recovery press VOLUME UP while pressing and holding POWER button but you can't flash custom ROM or wipe SYSTEM from there. For that purpose use Official latest TWRP recovery from their website.
JackFrost said:
You can not flash stock ROM from TWRP or other custom recovery. You need a PC with Moto Drivers and fastboot tools installed. Then you have to flash the stock rom from fastboot (generally instructions are given inside rom zip in a file called 'flashfile.xml'). I can't say about flashing JX series ROM (maybe it needs you to be on stock first or something like that) but here are the files needed to install Motorola ADB and FASTBOOT drivers and ADB & FASTBOOT tools on windows pc:
https://firmware.center/software/Android/platform-tools/win/ and https://firmware.center/software/Motorola/
---------- Post added at 10:15 PM ---------- Previous post was at 10:11 PM ----------
To get into stock recovery press VOLUME UP while pressing and holding POWER button but you can't flash custom ROM or wipe SYSTEM from there. For that purpose use Official latest TWRP recovery from their website.
Click to expand...
Click to collapse
I already have these installed! But when I run RDS and connect my phone in fastboot mode to the computer, RDS doesn't detect it in the program. I mean, the device doesn't show up in the boxes below. But when I run 'fastboot devices' in CMD I can see my device connected. And can you pleeease tell me how to flash ROMs through the stock recovery?
meraj99 said:
I already have these installed! But when I run RDS and connect my phone in fastboot mode to the computer, RDS doesn't detect it in the program. I mean, the device doesn't show up in the boxes below. But when I run 'fastboot devices' in CMD I can see my device connected. And can you pleeease tell me how to flash ROMs through the stock recovery?
Click to expand...
Click to collapse
Stock recovery don't flash roms, thats why we use customs recovery. As he mentioned just flash the stock rom, enable usb debugging and oem unlocked. Just flash the files and again flash the recovery which ever suits you and thats it.
Note : take backup first as it wipes your internal storage.
DgnrtnX said:
Stock recovery don't flash roms, thats why we use customs recovery. As he mentioned just flash the stock rom, enable usb debugging and oem unlocked. Just flash the files and again flash the recovery which ever suits you and thats it.
Note : take backup first as it wipes your internal storage.
Click to expand...
Click to collapse
well, how do I flash...? When I try to flash using TWRP it gives the error. I've tried almost all available TWRP v3+ recoveries
meraj99 said:
well, how do I flash...? When I try to flash using TWRP it gives the error. I've tried almost all available TWRP v3+ recoveries
Click to expand...
Click to collapse
Go into bootloader and then flash the file linked below from computer.
Note : usb debugging is must.
Link : https://www.google.co.in/amp/s/foru...tock-rom-npjs25-93-14-4-march-1-t3608138/amp/
DgnrtnX said:
Go into bootloader and then flash the file linked below from computer.
Note : usb debugging is must.
Link : https://www.google.co.in/amp/s/foru...tock-rom-npjs25-93-14-4-march-1-t3608138/amp/
Click to expand...
Click to collapse
yoooo!!! IT worked! Thank you so much! ^_^
DgnrtnX said:
Go into bootloader and then flash the file linked below from computer.
Note : usb debugging is must.
Link : https://www.google.co.in/amp/s/foru...tock-rom-npjs25-93-14-4-march-1-t3608138/amp/
Click to expand...
Click to collapse
erm, my SIM isn't being detected... WiFi works fine
meraj99 said:
erm, my SIM isn't being detected... WiFi works fine
Click to expand...
Click to collapse
Just flash twrp and which ever rom you like, and see if they are working or not.
DgnrtnX said:
Just flash twrp and which ever rom you like, and see if they are working or not.
Click to expand...
Click to collapse
Not working
meraj99 said:
Not working
Click to expand...
Click to collapse
I think reflashing the stock rom is the only thing to do. Read carefully whatever is written in that thread. And see if all the commands are properly exicuted.
I dont know any work around for sim as i have never had that issue. Tell me if its solved or not for just a bit of knowledge.
Edit : just for reference you are not using moto g4 play device, are you?
Standard ROM and recovery cannot be flashed by TWRP, only in fastboot mode.
DgnrtnX said:
I think reflashing the stock rom is the only thing to do. Read carefully whatever is written in that thread. And see if all the commands are properly exicuted.
I dont know any work around for sim as i have never had that issue. Tell me if its solved or not for just a bit of knowledge.
Edit : just for reference you are not using moto g4 play device, are you?
Click to expand...
Click to collapse
nah, G4+. Problem is with the baseband
meraj99 said:
nah, G4+. Problem is with the baseband
Click to expand...
Click to collapse
I flashed that firmware 2 days ago and is working fine for me, try flashing baseband then. Idk link for it search in Google for it
DgnrtnX said:
I flashed that firmware 2 days ago and is working fine for me, try flashing baseband then. Idk link for it search in Google for it
Click to expand...
Click to collapse
that's what I'm looking for. I need the Indian baseband file, do you know where i can get it

Categories

Resources