3 Thin black parallel lines on my display - G2 Q&A, Help & Troubleshooting

I was on Stock ZVA, I wanted to install "[ROM] LS980 ZVI stock 5.0.2 flashable"
http://forum.xda-developers.com/sprint-g2/development/rom-ls980-stock-5-0-2-zvi-flashable-t3303163
So I used FreeGee app to install TWRP as suggested by some users, Twrp installed successfully, and i tried to flash the above ROM, it gave me failed error twice so i tried to restore my ZVA backup through TWRP, the device restarted normally LG boot logo appeared, and after that white line appeared and device shutdown, i treid to start the device again same thing happened, I used "[D80x][VS/LS980][F320x] Bootloader Changer 2.3.2 [AROMA MULTi 12] [30F][CAF]
http://forum.xda-developers.com/lg-g2/general/d802-bootloader-changer-1-1-jb-kk-lp-t3104380
to flash KK bootloader, and tried to installed the above ROM again, It started successfully, now everything is working fine but there are now three thin black parallel line on the right side of the screen :crying:
How can i fix this, can a jdi kernel can fix this?

Related

LG G2 can't get to my custom recovery (TWRP)

I'm not necessarily new to the root lifestyle of android but this may be a noob sort of problem
I rooted my LG G2 (t-mobile variant) and installed TWRP 2.6.3.2 if I'm not mistaken so every thing was fine in the beginning, I flashed ROMs (CM 13 PREFERABLY) so afterwards I decided to update my custom recovery from its current version at the time to 2.8.x.x it says that its installed but everytime I attempt to get into recover it give me the lg logo boot with some type of error message for about 2 seconds and then black screen as though there isn't a recovery installed, I've tried flashing it through Flashify and Rashr but to no avail. CAN SOMEONE PLEASE HELP!!!!!

TWRP Install help needed - "Critical Error" instead of recovery mode

Hi,
I have rooted G2 802 International version, with stock ROM V30B.
Now I try to install TWRP there.
Tried multiple image versions, including from TWRP download site,
last one from here http://techerrata.com/file/twrp2/g2d802/openrecovery-twrp-2.8.5.0-d802.zip
Installed through adb shell,
Code:
dd if=/data/local/tmp/recovery.img of=/dev/block/platform/msm_sdcc.1/by-name/recovery
When I try to enter recovery mode I get a brief "Critical Error" message (in text mode), then promp to choose whether to reboot or enter download mode. No TWRP.
Any ideas ?
You're on LP bootloader which does not allow you boot custom kernel (locked bootloader). Downgrade to KitKat bootloader, custom recoveries and kernels are BUMPED (signed), and KK bootloader thinking these images are official, will pass it to boot.
Use AutoRec for LP from Google Play, it will do everything by one click. Because after flashing KK bootloader, official kernel of Lollipop cannot be booted too as i remember. Anyway AutoRec app will downgrade bootloader, flashes recovery TWRP and modded official kernel image, so will do everything you need.
AutoRec, you had one job...
PolishVodka said:
You're on LP bootloader which does not allow you boot custom kernel (locked bootloader). Downgrade to KitKat bootloader, custom recoveries and kernels are BUMPED (signed), and KK bootloader thinking these images are official, will pass it to boot.
Use AutoRec for LP from Google Play, it will do everything by one click. Because after flashing KK bootloader, official kernel of Lollipop cannot be booted too as i remember. Anyway AutoRec app will downgrade bootloader, flashes recovery TWRP and modded official kernel image, so will do everything you need.
Click to expand...
Click to collapse
AutoRec seems not to work. I installed the VS980 version for the Verizon variant of the phone, but all the app has is a picture of lollipops. Tapping the one at the bottom restores my (corrupted) backup, while tapping the one at the top does absolutely nothing. Any ideas?
UPDATE (8:42PM) -
Figured it out! In the SuperSU app, I disabled "mount namespace separation" and "tapjacking protection" before rebooting and trying AutoRec one more time. This enabled the hidden install button behind the lollipop icon in the app and allowed TWRP to be installed instantly. Hooray!
Hi, I tried to install TWRP using Autorec. But my phone stuck on fastboot mode. although the phone said it is d802 varient after I remove the back it says ls 980. I can run fstboot commands but not adb. Itried 5 different computers with win7/8/10. No good results. worse case is, no download mode at all. So I can not flash the phone. I tried to flash TWRP using fastboot but nothing changed. Can some one please help me

Cloudy 3.3 on F320K - Black Screen

I have F320K on Lollipop 5.0.1
Software Version F320k30D
Every time i am flashing this Cloudy 3.3 i am getting a black screen. Here is what i am doing:
1. Root With KingRoot.
2.Recovery with Autorec from Here
3. After Going to Recovery Flashing the Latest TWRP 3.0.2-1
4. Reboot to Latest TWRP 3.0.2-1
5. Flashing KK Bootloader Via Bootloader Changer From Here. I am choosing the BLChanger-F320x-nevax-2.3.2-signed.zip
6. While Flashing the KK Bootloader with Bootloader Changer im getting a massage that : "This package is for device f320k, galbi.... This device is f320" Does that mean im flashing the wrong Bootloader? Also i have selected update recovery field to update TWRP to 2.8.7.1, but nothing happens.
7. Then i am wiping: System, Data, Dalvik, Cache
8. I am installing the ROM.
9. Upon restart im getting a quick LG Logo followed by a black screen.
Am i missing something here? Please help.
Check this thread :http://forum.xda-developers.com/lg-g2/help/installing-cloudyg2-3-3-f320-t3197531

HELP bricked

I rooted with kingroot, it worked and then tried to replace it with supersu using supersume. Everything worked fine. Supersu updated and asked for reboot. So I rebooted the phone and it got stuck at verizon screen. Factory resetted it from recovery menu, still stuck at verizon screen.
LG G2 VS980
No custom recovery
No custom rom
Download mode working
I remember turning USB debugging on but it could be off I'm not sure.
Please help
Fixed it by flashing kitkat kdz file with lg flash tool. (This is my other account, idk why I made the OP one)

I have no idea why i'm in bootloop.

Hello,
Since my G2 is now out of warranty, i decided to upgrade my stock version ( lollipop ) to ResurrectionRemix-N-v5.8.0-20161128-d802.
Well in order, what i did :
-rooted phone with Kingo because the LG one click root method wasn't working ( MSVCR100.dll is missing" error, install Visual C++ Redist not possible => telling me my version is newer ; probably since i'm running Windows10 x64 )
-installed autorec and got TWRP 2.7.0.0
-i made a backup of everything on my usb disk.
-installed ResurrectionRemix v.5.8.0 and bootstack-d802-CAF
-loaded it successfully
-tried to reboot in recovery for installing GAPPS
-got trouble with lg security when booting since, and never been able to go in recovery again.
-i've been able to still load the system to Nougat, and tried to reinstall autorec... i was rooted and it didn't worked ( loki error ), so i unrooted and rooted it again, rebooted, and i'm now stuck in bootloop when loading Resurrection and i have no clue where to start from now on.
I would accept and be grateful for any idea
Thank you.
Update : i'm lucky, i just plugged it to computer and i'm running Download mode.

Categories

Resources