Requirements:*
-Root
-Busybox
-Custom recovery
Installation:
1.- Deactivate NuPlayer in developer options.
2.- Deactivate any other equalizer.
3.- Set selinux to permissive with an app
Download link for viper
http://forum.xda-developers.com/attachment.php?attachmentid=3251183&d=1428464518
4. Reboot to twrp flash viper.
5.reboot. Open viper. You have to install driver i used middle one.
6.click enable viper inside app. And force viper.
Also set user ui to expert in settings for extra options.
Make sure to give thanks to the viper team
Related
Hello Everyone,
I would like to share with you'll a Sound Mod that will bring a Magical music listening experience on AOSP Roms. Why Aosp? Because i feel music experience on Aosp Roms have not been that good as Stock Rom besides battery drain has been more. And since Lollipop is still a young interation of android out there, it is difficult to find any mods in this early stage. So here it is "ExtremeBeats+ViperMod" combo.
Requirments: ExtremeBeats, Viper4Android, SElinuxChanger.
Disclaimer: I am not responsible for any Soft/Hard Brick. Try at your own risk.
Original Thread: ExtremeBeats , LolliviperV2.3.3 and
SElinux changer
Steps:
1. Download "ExtremeBeats v4.0 Muses.zip" from Original thread and flash it via recovery.
2. Download "SElinux Changer" and change it to permissive.
3. Download "LolliViperV2.3.3.zip" and flash it via recovery.
4. Boot up and install Viper driver via Viper app. Reboot after installation.
5. Download "ExtremeBeats Viper Presets.zip" from Original thread and Unzip the contents to Viper4Android-->Profiles folder. Additionally i attach a profile customized by me in the attachment. Extract it to same folder.
6. Load Effect profile of your choice. Enjoy Magical Music experience..!
Recommended Music player Link
LineageOS
>Root addon
>busybox install to /system/xbin
>install SELinuxmodechanger apk set to permissive always (v4a will stop working if enforcing..confirmed)
>install v4a nougat-io fix apk (present in ViPER4Android_FX_v2505.zip)
>can disable fx music app
>reboot
>install v4a drivers from viper app
>reboot
>enjoy
Stock B331 rom
>Root with SuperSu
>busybox install to /system/xbin
>install Viper4Android SELinux Policy fix via **TWRP** recovery
>install v4a apk (present in ViPER4Android_FX_v2505.zip) [do not install v4a-nougat-io apk]
>can disable fx music app
>reboot
>install v4a drivers from viper app
>reboot
>enjoy
Or just use Magisk + V4A addon and do everything systemlessly without that much hassle.
Why? No need to patch SELinux (works under Enforced), no need for busybox, no need for flashed zips and more important - no modifications to the system partition. Literally easiest, three step process, you'll find out there.
ShadySquirrel said:
Or just use Magisk + V4A addon and do everything systemlessly without that much hassle.
Why? No need to patch SELinux (works under Enforced), no need for busybox, no need for flashed zips and more important - no modifications to the system partition. Literally easiest, three step process, you'll find out there.
Click to expand...
Click to collapse
lol:laugh::laugh::laugh:
I had a rough time with this so I thought I'd share my fix. This may work on other Nougat ROMs as well. If your ROM uses Chainfire SuperSU you can skip all of the Magisk stuff and go straight to step 4.
1: Clean install AEX + gapps
2: Boot system and update Magisk(via settings/Magisk Manager) and BusyBox(via play store app) and reboot
3: Flash Magisk SELinux Permissive Script
https://forum.xda-developers.com/apps/magisk/module-magisk-selinux-permissive-script-t3577549
4: Use Root Explorer to copy ViPER4Android_FX_v2505_A7.x_Nougat_IO_test_fix.apk to System/Privapp and set permissions rw-r--r--
https://forum.xda-developers.com/showthread.php?t=2191223
5: Reboot, launch V4A app, grant Root, install driver, reboot
Bonus: AdAway works if copied to Privapp with correct permissions rw-r--r--, reboot and launch
aaron.a said:
I had a rough time with this so I thought I'd share my fix. This may work on other Nougat ROMs as well. If your ROM uses Chainfire SuperSU you can skip all of the Magisk stuff and go straight to step 4.
1: Clean install AEX + gapps
2: Boot system and update Magisk(via settings/Magisk Manager) and BusyBox(via play store app) and reboot
3: Flash Magisk SELinux Permissive Script
https://forum.xda-developers.com/apps/magisk/module-magisk-selinux-permissive-script-t3577549
4: Use Root Explorer to copy ViPER4Android_FX_v2505_A7.x_Nougat_IO_test_fix.apk to System/Privapp and set permissions rw-r--r--
https://forum.xda-developers.com/showthread.php?t=2191223
5: Reboot, launch V4A app, grant Root, install driver, reboot
Bonus: AdAway works if copied to Privapp with correct permissions rw-r--r--, reboot and launch
Click to expand...
Click to collapse
If you do so, I think you lost all benefit of systemless system, as you are touching directly to the system.
casual_kikoo said:
If you do so, I think you lost all benefit of systemless system, as you are touching directly to the system.
Click to expand...
Click to collapse
Good call. Not a problem for me. I think dudes selinux script enables permissive system wide which may also turn people off. But my app selection is minimal and I use my phone more like a media tool than anything else.
You don't need to change to Permissive at all. Just install V4A latest apk and flash the driver with Magisk. Works with Enforcing fine.
I wanted to install Viper4android on stock 7.0 march but was unable to do so after following 2-3 different methods. Is there anyone successfully using viper4android on stock? And if not successful them suggest any other sound mod fully working and compatible with stock 7.0 march. I am rooted, elementalX 1.04 + busybox also installed :silly:
You intent with Viper4Aprise?
most of these require permissive selinux and i dont want to do that.
Why? I dont know for what flash permissive, what Is this?
JassyelZ said:
Why? I dont know for what flash permissive, what Is this?
Click to expand...
Click to collapse
selinux can be "enforcing" which is more secure or "permissive" which is less secure. V4A does require permissive kernel generally.
so anyone found a working sound mod for stock rom with selinux enforcing?
nitish_namdev said:
so anyone found a working sound mod for stock rom with selinux enforcing?
Click to expand...
Click to collapse
I've got ARISE running on my device (NPJS25.93-14.4, ElementalX, magisk v13). Note, I'm just running the core modules, any other addons I do not know if you need to tweak further. I have not changed ElementalX's SE Linux permissions, and running 'su getenforce' in a terminal returns as 'enforcing'.
My setup: XT1642, updated to NPJS25.93-14.4, ElementalX, magisk v12/v13 (think if you have SuperSU, should be okay too).
1) Downloaded ARISE Magnum Opus from here: https://forum.xda-developers.com/android/software/r-s-e-sound-systems-auditory-research-t3379709 (I currently have the 05/06 build). The download link is the Magnum Opus TM. Also, as I'm using magisk, I downloaded the magisk compatibility module. https://forum.xda-developers.com/an...y-research-t3379709/post71569390#post71569390
2) To configure ARISE before flashing, I extracted arise_customize.prop to /sdcard, and configured install.core to = true, install.v4a_2.5.0.5= to be true (and later found out I needed delete.deep_buffer to = true). Saved the ARISE customise file (I've uploaded my prop file if you want to see my modifications. If you wish to use this file, delete the .txt in the file name so the extension is .prop).
3)Rebooted to TWRP. Backed up. Flashed ARISE Magnum Opus - as configured, it should flash the 2.5.0.5 core module and delete the deep buffer (without deleting deep buffer, I found that ARISE did not process output).
3a)After ARISE, flashed the magisk compatibility module (if you're on SuperSU, you may not have to flash this). With magisk v13, this does not trigger Safety Net.
4)Wipe cache/Dalvik and reboot.
5)As I'm using Poweramp, I had to go to Poweramp Settings > Audio > Advanced Tweaks and disable Direct Volume Control. Also, I disabled the main Equalizer.
Now, ARISE processes headphone output as per the ARISE settings.
I mainly thanks to?
@Silesh.Nair, @1chrome, 67silverlight
For Awesome Build of INVICTA OS /Android version=8.1
@UltraM8
For Ainur Sauron
https://forum.xda-developers.com/android/software/soundmod-ainur-audio-t3450516
@james3460297
For JamesDSP Audio Manager
https://forum.xda-developers.com/android/apps-games/app-reformed-dsp-manager-t3607970
@guitardedhero
For Dolby Atmos™ Axon7 Oreo Port
https://forum.xda-developers.com/oneplus-5/themes/app-dolby-atmos-axon-7-oreo-port-t3734040
@skittles
For CandyBass load effect profile
I had tested so many build of their updates but i found these build are pretty Stable for Xiaomi Redmi Note 4
Sharing because I am music lovers
Please read the instructions before installation.
{Required zip file to flash from TWRP}
First :
[Latest Magisk]
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Second :
[Ainur Sauron] flash this zip? from recovery
https://drive.google.com/file/d/1Taa8CEj4cA8u0uuU8Kz8l3Wm5qjdIoEH/view?usp=drivesdk
Third :
[JamesDSP Manager] flash this zip? from recovery
https://drive.google.com/file/d/14tI4Ju4U6vTtryjdPz8BinygSEvKro3A/view?usp=drivesdk
Fourth :
[Dolby Atmos™ Axon7]
http://qc4.androidfilehost.com/dl/3...569949168/DolbyAtmos_Axon7_Oreo_20180125.zip?
------------------------END--------------------------
Flashing Process Complete
Install this APK?From threads
https://forum.xda-developers.com/redmi-note-4/how-to/music-axon7-music-player-t3741719
"Plug in your headeset or earphone whatever u had"
Open Axon7 Music Apps which u install from link -go to-3dot menu on right upper corner/settings/press on dolby Atmos
Now slide to right from Dolby Atmos ™ APK to Movie-Music-Etc-Etc.
If you got sound effects changing thumbs up on {Thanks Giving}
*Now wait there are more few steps for Ainur Audio
Download ?
https://drive.google.com/file/d/1_sBKXPeN0DOH62846jdaicXjh6qYzP60/view?usp=drivesdk
Extract the zip
Copy and paste on Storage/emulated/0
Now open JamesDSP APK from app drawer.
1)Turn on- Master Switch enabled
2)Go to-3dot menu on right upper corner/Load Preset/and select CandyBass
Feel the magic on sound.
*Sorry for my English
*One complimentary Mp3 is also available if you want.
*https://drive.google.com/file/d/1PDYZCsseRNDGz7x0x2AiSoj9kQ0rr7FZ/view?usp=drivesdk
[Screenshot]
That Dolby.
How did you install as magisk module. Can you tell. I saw original post but it only installed as system app not as module.
Tell how....
Aniruddhlr said:
That Dolby.
How did you install as magisk module. Can you tell. I saw original post but it only installed as system app not as module.
Tell how....
Click to expand...
Click to collapse
Flash instructions #4 from twrp recovery