First of all greetings, and I apologize for the English since I speak Spanish and I have to use a translator. even so aver if you can help me, it is that I have a htc desire orange 820 in Spain . It all started when I wanted to have root, then I came out a system update and upgrade the mobile was in loop turned off and entered the recovery went off and returned to recovery, without knowing that I do I clean everything, system , data , storage internal everything, I have the phone in s -on and boot loader closed can not go into recovery I get re- locked closed it to try to install the os , and above all in recovery mode told me he had no operating system installed I'm desperate not to buy the phone less than one month ago and tried everything and am not able to install any operating system or may not know how.
thanks for your attention
-----////------------///-----------------///-------------------////----------------------
Primero de todo saludos, y pido perdon por el ingles ya que hablo español y tengo que usar un traductor. aun asi aver si podeis ayudarme, resulta que tengo un htc desire 820 de orange en españa. todo empezo cuando queria tenerlo root , luego me salio un actualizacion del sistema y al actualizarlo el movil quedaba en loop se apagaba y entraba al recovery se apagaba y volvia al recovery, yo sin saber que hacer hice limpieza a todo, sistema, data, almacenamiento interno a todo, tengo el movil en s-on y el boot loader cerrado no puedo entrar en recovery me sale re- bloqueado lo cerre para intentar instalar el os, y antes de todo en el modo recovery me decia que no tenia sistema operativo instalado, estoy desesperado no se que hacer el movil lo compre hace menos de 1 mes ya intente de todo y no soy capaz de instalar ningun sistema operativo o quizas no sepa como hacerlo.
gracias por la atencion
rotigal2 said:
First of all greetings, and I apologize for the English since I speak Spanish and I have to use a translator. even so aver if you can help me, it is that I have a htc desire orange 820 in Spain . It all started when I wanted to have root, then I came out a system update and upgrade the mobile was in loop turned off and entered the recovery went off and returned to recovery, without knowing that I do I clean everything, system , data , storage internal everything, I have the phone in s -on and boot loader closed can not go into recovery I get re- locked closed it to try to install the os , and above all in recovery mode told me he had no operating system installed I'm desperate not to buy the phone less than one month ago and tried everything and am not able to install any operating system or may not know how.
thanks for your attention
-----////------------///-----------------///-------------------////----------------------
Primero de todo saludos, y pido perdon por el ingles ya que hablo español y tengo que usar un traductor. aun asi aver si podeis ayudarme, resulta que tengo un htc desire 820 de orange en españa. todo empezo cuando queria tenerlo root , luego me salio un actualizacion del sistema y al actualizarlo el movil quedaba en loop se apagaba y entraba al recovery se apagaba y volvia al recovery, yo sin saber que hacer hice limpieza a todo, sistema, data, almacenamiento interno a todo, tengo el movil en s-on y el boot loader cerrado no puedo entrar en recovery me sale re- bloqueado lo cerre para intentar instalar el os, y antes de todo en el modo recovery me decia que no tenia sistema operativo instalado, estoy desesperado no se que hacer el movil lo compre hace menos de 1 mes ya intente de todo y no soy capaz de instalar ningun sistema operativo o quizas no sepa como hacerlo.
gracias por la atencion
Click to expand...
Click to collapse
1) hold power button + volume down button for 2 minutes.
2) If above method doesn't work
Try holding the power button and volume down buttons down,
while holding the proximity sensor directly under a very bright light.( I AM NOT TROLLING)
Note: It happened with me yesterday, and I don't know which of the above method worked but me and my phone got back to life
This also happened with a HTC One user http://forum.xda-developers.com/show....php?t=2446385
I have HTC desire 820 . on 4 Jan 2016 my phone warranty expired and on 10 Jan 2016 I was using my phone normally . I was in market at 6 pm my phone battery decreased to 5% when I put my phone to my pocket then approx 9 o'clock I was in my room then I took out my phone to my pocket I saw my phone was switched off then I think it was due to battery discharge . when I plug my phone to charger it was not taking charging only my indicator light is continuaslly blinking . and phone was not starting now . when I visit HTC service center they told me that your phone mother board replaced at the cost of 9000 indian rupees . i don't what happen to my phone . I always using my phone very safely . really sad . plz help me if any one can I really thankfull to him.. Thanks
Thakur_Raushan said:
I have HTC desire 820 . on 4 Jan 2016 my phone warranty expired and on 10 Jan 2016 I was using my phone normally . I was in market at 6 pm my phone battery decreased to 5% when I put my phone to my pocket then approx 9 o'clock I was in my room then I took out my phone to my pocket I saw my phone was switched off then I think it was due to battery discharge . when I plug my phone to charger it was not taking charging only my indicator light is continuaslly blinking . and phone was not starting now . when I visit HTC service center they told me that your phone mother board replaced at the cost of 9000 indian rupees . i don't what happen to my phone . I always using my phone very safely . really sad . plz help me if any one can I really thankfull to him.. Thanks
Click to expand...
Click to collapse
Charge your mobile for a day. Plug your device via USB on your Computer and if you hear some sound then there is a possibility of fixing your phone. I am talking about the sound which is heard when you insert a pendrive or any hardware via usb. If you hear it, follow my instructions given above.
Related
Hello, I suppose that you have seen many subjects of this style, but I can’t find the solution to my problem looking for in this forum:
A friend gave me his Qtek S200 (that bought with a supply of Vodafone) because a day, the Pocket PC didn’t work, so he tried to take it to the Technical Service, but the Technical Service said to him that they could not repair it because was of Vodafone Company :S, something that I follow without understanding... Then, seeing that it did not have solution, he gave me the Pocket PC and he buy another one.
I saw in the beginning that it did not respond to any key, later I looked for in the manual and I did hard-Reset to him, left the screen where it said to me that send pressed to do hard-reset and when I pressed the button, it left "Formating FAT, Error format" (or something like that) and appeared the screen of Vodafone, later appeared a white screen and began to blink. I could not leave there until I did not clear the battery.
At the end I found like entering way to bootloader, so I entered and it left the version of the ROM. I looked for and I found the ROMs to be able to recover it, that was: "New ROM Ideal Wm5 to later pass to WM6" and the ROM that was official of Vodafone. I installed first the one of Vodafone, came two ROMs to install, the first installation was made well, and second also. When finishing, the program said to me that everything had come out well, but the Pocket PC remained with the black screen and it did not ignite with the button of Power:S. I did a soft-reset to him and it left the screen to me bootloader with the version of the ROM, when one assumed that had to start Windows Mobile 5 with normality. I did hard-reset to him and format returned to me to leave the one "Error". Later I decided to install the ROM "New Ideal ROM WM5 to happen later to WM6", the process began correctly, and when it went as much to the 100% in the computer as in the PDA, the Pocket PC turn off but the computer left an errpr. And the Pocket PC doesn’t respond since then, neither with a soft-reset, nor hard-reset nor entering way to bootloader... And I don’t know what to do!
I would like that somebody could help me
PS: I have been able to scan the leaf that sent the technical service to my friend, here I leave the Link you:
I wait for your commentaries.
Thanks beforehand
Traducción al Español:
Hola, supongo que abreis visto muchos temas de este estilo, pero no he conseguido encontrar la solución a mi problema buscando en este foro, OS explico:
Un amigo mío me dio su Qtek S200 (que compró con una oferta de Vodafone) porque un día, de buenas a primeras se le estropeó, intentó llevarla al Sat (sin haber trasteado con ella cambiandole de Rom ni nada por el estilo), pero el SAT le dijo que no podían repararla porque era de Vodafone :S, algo que sigo sin entender... Entonces, viendo que no tenía solución, se compró otra y me dio a mi esta con el típico dicho de "si la arreglas pa ti" xD.
Total que me puse a trastear con ella, al principio vi que no respondía a ninguna tecla, después busqué en el manual y le hice un hard-Reset, salía la pantalla donde me decía que pulsara send para hacer el hard-reset y cuando le daba, me salía "Formating FAT, Error format" (o algo así) y aparecía la pantalla de Vodafone, después una pantalla en blanco y empezaba a parpadear. No podía salir de ahí hasta que no le quitara la batería.
Al final encontré como entrar en modo bootloader, entré y me salieron las tres rallas de colores y la versión de la ROM, busqué y encontré las ROMs para poder recuperarla, que fueron: "Nuevo ROM Wm5 Ideal para pasar después a WM6" y la ROM que era oficial de Vodafone.
Instalé primero la de Vodafone, venían dos ROMs para instalar, la primera instalación se hizo bien, y la segunda también. Al terminar, el programa me decía que todo había salido bien, pero la Pda se quedaba con la pantalla en negro y no encendía con el boton de Power :S. Le hice un soft-reset y me salió la pantalla de bootloader con la versión de la ROM, cuando se suponía que tenía que arrancar Windows Mobile 5 con normalidad :S. Le hice un hard-reset y me volvió a salir lo de "Error format".
Más tarde decidí instalar la ROM "Nuevo ROM WM5 Ideal para pasar después a WM6", se inició el proceso correctamente, y cuando iba al 100% tanto en el ordenador como en la PDA, se me apagó la PDA :S pero en el ordenador me salió un error dándome la opción a recuperar. Y la PDA no volvió a responder desde entonces, ni con un soft-reset, ni hard-reset ni entrando en modo bootloader... Y no se que hacer!!!
Después de esta larga charla que espero alguien haya leído, me gustaría que alguien pudiese ayudarme, a pesar de que la Qtek no es mía, pues me haría ilusión que funcionase!
PD: He conseguido escanear la hoja que le mandó el servicio técnico a mi amigo, aquí os dejo el link para que la veais:
Espero vuestros comentarios
Gracias de antemano
When you are in bootloader, what is the text displayed? There should be a number next to IPL, and one next to SPL.
Read again please, because I can't get into Bootloader screen, i can't turn on the Pocket PC
Hola, es bueno saber que hay mas gente que habla español acá
(it's good to know that there is some people speaking in spanish here )
Have you tryed charging the battery? because it happened to me something like that. Just plug it to the charger and wait some hours.
Spanish:
Probaste cargar la batería? por que me pasó algo similar y era solo q no tenía carga. Enchufalo al cargador unas horas y fijate.
Gracias, también se agradece que haya españoles
Si el caso es que he visto en otros foros también que se descarga la batería después de flashear, pero esque creo que se ha brickeado, así que estoy buscando soluciones de como resucitarla por "hardware".
English:
I have also seen in other forums that the battery unloads after flash, but I believe that it has been brick, so I am looking for solutions of like reviving it by "hardware".
tengo un problema. mi htc legend tiene reinicios espontaneos, este no es el problema, el detalle es que al reiniciarse sale la pantalla de htc y de ahi se reinicia una y otra vez, no entra al sistema.
Solo al conectarlo al usb, ya sea a corriente directa o a la laptop este comienza a iniciar.
Pero lo que desero es una solucion, no siempre tengo a la mano la laptop o el cargador para resolver este problema.
Por su atencion muchas gracias y espero una pronta solucion.
Google Translate
I have a problem. my htc legend has spontaneous reboots, this is not the problem, the thing is that when it restarts leave the htc screen and there is restarted again and again, does not enter the system.
Only when connected to USB, either direct current or laptop it starts to boot.
But that desertion is a solution, not always at hand I have a laptop or charger to solve this problem.
Thank you very much for your attention and hope a speedy solution.
It's called a bootloop I think. It occasionally pops up in these forums. Just search for "bootloop" and you'll find a solution. ;-)
Sent from my HTC Legend using XDA App
hi there, here's the deal, I'm from Mexico, so, I'll try to explain myself the best way posible in english, and then, put it in spanish, so if something is not well explained, can check in spanich and figure it out, or whatever, jejeje, so here I go
I got the e900h, and, in a particular party, the cel fell to the floor, and the screen got broke, real real broke, but, the touch and all the feature of my cellphone keep working in perfect way, so, the cell was ok, aparently (besides the screen broke) si it went that way for aprox 4 days, and suddenly the device restarted and, it got frozen on the LG screen, and I can't make it work again, always the same screen, and didn't go on from there, in 3 ocassions it go forward, put the other screens, and get to work, like nothing happens, but it only work for like 1-2 mins, and then restart again and stays on the LG screen, I already install the original ROM, so it has the very fist windows phone OS (windows 7) so I don't really know what would it be, I mean, I flashed the cell past friday, it all went great, and get freeze on the same screen (LG) so I let the device at the ofice and let the weekend pass, and today started again, and it work, like brand new, I started to put the first setting, hopping it didnt restart, but, like the other days, it restart, and stay on the LG screen, so, o don't think it is something on the OS, can somebady help me?? would it be a glass/touch system problem) any ideas?? hope someone can help me, so I can keep using the cell, and repair the screen, or just dump it and get a new one, hope somebody can help me, or at least, give me an answer, thank you!!!
ahora en español, por si alguien lo entiende y quiere ayudar, jejeje, a ver, ahi va
en resumen, el cel se me cayo y la pantalla (el cristal) valio gorro, esta rajado bien duro PERO, el touch esta al 100, y el cel funcionaba al 100, como por 4 dias, pero de repente se reinicio solo y ya se quedo trabado en la pantalla de LG (que es la primera q aparece cuando lo prendes) ya lo eh prendido y apagado mil veces pero nada, siempre lo mismo, a excepcion de dos o tres veces, en las cuales prendio como si nada, y funciono al 100, pero ps, al minuto o dos, se volvio a reiniciar y se quede de vuelta en la pantalla de encendido, pensando que seria un problema con el OS, que se hubiera ciclado o algo asi, ps le reinstale el ROM original (windows 7), pero ps nada, sigue trabado en la pantalla de encendido. Se que se instalo bien el ROM, y q no es un problema de OS pq ahora prendio, y todo bien, empezo con la configuracion del cel y todo el show, como si fuera la primera vez q lo usas, pero, de vuelta, se reinicio, y se quedo en la pantalla de LG (pantalla de encendido) asi q, espero que alguien pueda ayudar, o sepa mas o menos q podria ser, gracias!!!!!
Saludos desde Hermosillo Sonora Mexico, y, en vdd espero que alguien pueda ayudarme, si no, ps, ni pex, a mandar por un tubo al cel, y a buscar otro, pero ps, si quisiera hacer q funcione, pq la neta me gusta mucho el cel, bueno, el OS mas q nada, jejeje, ahora si, ahi va la pregunta, y espero tenga respuesta, jajajaja, GRACIAS!!!!!!!!!!
OTHER PERSPECTIVE OF THE ISSUE!!!
Forget about the screen and tha fact that the cel fall, just focuse on the issue of the LG screen that don't move, and the fact that sometimes, it go well, but 1 minute after, it reset and stays on the LG damn screen, it just happen once again, and it's already flashed, with the original ROM, and the instalation went well....
Please!! somebody!!!!!!!!!!!!
...bye new one ,you wil get over it faster its only money...
djuricn said:
...bye new one ,you wil get over it faster its only money...
Click to expand...
Click to collapse
actually that's what I'll do, it's just for knowledge because I'll get another windows phone, htc surround
Hola me podrian ayudar tengo el moto g4 xt1621, lo que sucedió fue que estaba lleno de eolo parche de seguridad de 7.0 no recuerdo si la era de diciembre de marzo pero cuando terminó el sistema de reboot ahora pero no prendio mas, solo prende el led Y la pc lo reconoce ya instale los drivers pero me da error quisiera saber si me podrian ayudar a fondo a recuperar mi moto g4, disculpen pero lo pongo en ingles y español pero no hablo ingles uso el traductor, ayudame porfavor
:crying: :crying:
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Hello I could help I have the bike g4 xt1621, what happened was that it was full of eolo security patch 7.0 I do not remember if the era of December of March but when the reboot system finished now but I did not turn on anymore, just turn on the led And the PC recognizes it and install the drivers but it gives me error I would like to know if I could help in depth to recover my bike g4, sorry but I put it in English and Spanish but I do not speak English I use the translator, help me please
:crying: :crying:
You should be a little bit more specific regarding to on what version did you were when this happened.
If the white led still works i think that you got a chance that your bootloader would be functional. Try to plug your device (powered off) to a charger while holding VOLUME - button.
Your goal is to enter to the bootloader mode and be able to flash the stock rom (full factory from march).
If this method doesn't work, you got high chances that your device might be soft-bricked, and you'll must wait till the new blank flash files be available.
This Motorola devices aren't the ideal ones for downgrade or update OTA's if you don't know what are you doing (it's clearly your case) because a bootloader and GPT downgrading could be very risky, and in some cases this ends in a bricked device (i'll hope not yours).
Same message in spanish:
Deberías ser más detallista en cuanto a en que versión estabas cuando te sucedió esto, si el led todavía prende puede que tengas todavía un bootloader funcional. Intentá conectando tu dispositivo (apagado) a un cargador presionando el botón VOLUMEN -.
Tu meta es poder entrar al modo bootloader para poder flashear la rom stock, en ese caso, tendrías que flashear la de Marzo. Si nada de esto sirve, posiblemente tu dispositivo este brickeado (como tantos otros en este foro). Estos dispositivos de Motorola no son los ideales para flashear roms sin saber lo que se hace, debido a que hacer un downgrade de la version del bootloader o del GPT termina en un brick.
Okay this is going to be troublesome with language barriers, please do the above steps and do inform us.
Download link is -
https://forum.xda-developers.com/moto-g4-plus/how-to/stock-rom-npjs25-93-14-4-march-1-t3608138
But do remember take the correct build option or check if your variant is present in the list or not
moonlightdrive said:
You should be a little bit more specific regarding to on what version did you were when this happened.
If the white led still works i think that you got a chance that your bootloader would be functional. Try to plug your device (powered off) to a charger while holding VOLUME - button.
Your goal is to enter to the bootloader mode and be able to flash the stock rom (full factory from march).
If this method doesn't work, you got high chances that your device might be soft-bricked, and you'll must wait till the new blank flash files be available.
This Motorola devices aren't the ideal ones for downgrade or update OTA's if you don't know what are you doing (it's clearly your case) because a bootloader and GPT downgrading could be very risky, and in some cases this ends in a bricked device (i'll hope not yours).
Same message in spanish:
Deberías ser más detallista en cuanto a en que versión estabas cuando te sucedió esto, si el led todavía prende puede que tengas todavía un bootloader funcional. Intentá conectando tu dispositivo (apagado) a un cargador presionando el botón VOLUMEN -.
Tu meta es poder entrar al modo bootloader para poder flashear la rom stock, en ese caso, tendrías que flashear la de Marzo. Si nada de esto sirve, posiblemente tu dispositivo este brickeado (como tantos otros en este foro). Estos dispositivos de Motorola no son los ideales para flashear roms sin saber lo que se hace, debido a que hacer un downgrade de la version del bootloader o del GPT termina en un brick.
Click to expand...
Click to collapse
It does not turn on, already try with volume - and power and not only turn on the LED
=========================================================
No no prende, ya intente con volumen - y power y no solo prende el LED
Por ahora no hay solucion amigo...
TioHenry said:
Hola me podrian ayudar tengo el moto g4 xt1621, lo que sucedió fue que estaba lleno de eolo parche de seguridad de 7.0 no recuerdo si la era de diciembre de marzo pero cuando terminó el sistema de reboot ahora pero no prendio mas, solo prende el led Y la pc lo reconoce ya instale los drivers pero me da error quisiera saber si me podrian ayudar a fondo a recuperar mi moto g4, disculpen pero lo pongo en ingles y español pero no hablo ingles uso el traductor, ayudame porfavor
:crying: :crying:
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Hello I could help I have the bike g4 xt1621, what happened was that it was full of eolo security patch 7.0 I do not remember if the era of December of March but when the reboot system finished now but I did not turn on anymore, just turn on the led And the PC recognizes it and install the drivers but it gives me error I would like to know if I could help in depth to recover my bike g4, sorry but I put it in English and Spanish but I do not speak English I use the translator, help me please
:crying: :crying:
Click to expand...
Click to collapse
el blank flash y algunos archivos no estan actualizados en base al moto g4
¿Eres de mexico?
Porcierto ya me suscribi a tu canal bro
Agregame: https://www.facebook.com/henry.andrade.528
QuinsZouls26 said:
el blank flash y algunos archivos no estan actualizados en base al moto g4
Click to expand...
Click to collapse
Pregunta!!!
QuinsZouls26 said:
el blank flash y algunos archivos no estan actualizados en base al moto g4
Click to expand...
Click to collapse
Se resolvio tu problema de Brick??? tengo el XT1621 y solo enciende el led y la PC no lo reconoce, ya he descargado los drivers de motorola y los de DB y los de Qualcom y nada .............. me puedes decir como lo resolviste ???
Se solucionó el brick
Utilizando la versión más moderna del blank flash se puede recuperar el inicio del bootloader, solo que debes flashear la última versión de Android que sacó Motorola
MirkoTL said:
Se resolvio tu problema de Brick??? tengo el XT1621 y solo enciende el led y la PC no lo reconoce, ya he descargado los drivers de motorola y los de DB y los de Qualcom y nada .............. me puedes decir como lo resolviste ???
Click to expand...
Click to collapse
QuinsZouls26 said:
Utilizando la versión más moderna del blank flash se puede recuperar el inicio del bootloader, solo que debes flashear la última versión de Android que sacó Motorola
Click to expand...
Click to collapse
4. Use the English language.
We understand that with all the different nationalities, not everyone speaks English well, but please try. If you're really unable to post in English, use an online translator. You're free to include your original message in your own language, below the English translation. (This rule covers your posts, profile entries and signature). You could try :- https://translate.google.com/ or https://www.babelfish.com/ or use one of your choice.
????????
QuinsZouls26 said:
Utilizando la versión más moderna del blank flash se puede recuperar el inicio del bootloader, solo que debes flashear la última versión de Android que sacó Motorola
Click to expand...
Click to collapse
Como puedo flashear la última versión de android que saco motorola si mi celular ni siquiera es detectado por el computador, solo parpadea el led. Ademas tienes algún enlace de la versión más moderna del blank flash ??
How can I flash the latest version of Android that I get Motorola if my cell phone is not even detected by the computer, only the LED flashes. Do you also have a link to the most modern version of blank flash?
Hi Friends, my LG G2 is in the screen LG logo and after this the message security error and power down.
Before this my phone its recognized by the pc (only fastboot mode) and with the Verry Partitions error, i recovered this with SRKTool so.. now this into the Security Error and my PC not recognize the device (i tried on 3 pcs and 9 diferent ports)
I need help please!!! I dont have money for another phone, and this is my life, please, any help is received. Iam from Venezuela, and sorry for th bad english.
MoixyS2 said:
Hi Friends, my LG G2 is in the screen LG logo and after this the message security error and power down.
Before this my phone its recognized by the pc (only fastboot mode) and with the Verry Partitions error, i recovered this with SRKTool so.. now this into the Security Error and my PC not recognize the device (i tried on 3 pcs and 9 diferent ports)
I need help please!!! I dont have money for another phone, and this is my life, please, any help is received. Iam from Venezuela, and sorry for th bad english.
Click to expand...
Click to collapse
Here's a guide: https://forum.xda-developers.com/lg-g2/help/noob-friendly-recovery-download-mode-t3112805
Jan Philipp said:
Here's a guide: https://forum.xda-developers.com/lg-g2/help/noob-friendly-recovery-download-mode-t3112805
Click to expand...
Click to collapse
this works only on linux... sure? My windows pcs not recognize my device...
.
MoixyS2 said:
this works only on linux... sure? My windows pcs not recognize my device...
.
Click to expand...
Click to collapse
Right. You need a running Linux. So you can download a Linux-Live-CD and run it from CD/DVD-drive without installation or you can set up a Linux with VirtualBox which is done in a couple of minutes.
Sadly I have no knowledge about windows solutions. Sorry.
hola ! según lo que me pasó hace muy poco, yo hice prácticamente lo mismo que vos (osea arreglarlo con un archivo bat, o no ?)... lo que funcionó en mí caso fue bajar un archivo TOT y el correspondiente dll y flashear vía Flash tools 1.6, es decir, no el "normal" que le pones el kdz y listo porque ese no me lo tomaba de ninguna forma... espero que te sirva ! tengo tutoriales pero creo que son todos enlaces externos a otros foros y no sé si se considerará spam o no... buena suerte
Hello ! According to what happened to me very recently, I did pretty much the same as you (I fix it with a bat file, or not?) ... what worked for me was to download a TOT file and the corresponding dll and flash via Flash Tools 1.6, that is, not the "normal" you put the kdz and ready because that did not take me in any way ... I hope it serves you! I have tutorials but I think they are all external links to other forums and I do not know if it will be considered spam or not ... good luck
superking123 said:
hola ! según lo que me pasó hace muy poco, yo hice prácticamente lo mismo que vos (osea arreglarlo con un archivo bat, o no ?)... lo que funcionó en mí caso fue bajar un archivo TOT y el correspondiente dll y flashear vía Flash tools 1.6, es decir, no el "normal" que le pones el kdz y listo porque ese no me lo tomaba de ninguna forma... espero que te sirva ! tengo tutoriales pero creo que son todos enlaces externos a otros foros y no sé si se considerará spam o no... buena suerte
Hello ! According to what happened to me very recently, I did pretty much the same as you (I fix it with a bat file, or not?) ... what worked for me was to download a TOT file and the corresponding dll and flash via Flash Tools 1.6, that is, not the "normal" you put the kdz and ready because that did not take me in any way ... I hope it serves you! I have tutorials but I think they are all external links to other forums and I do not know if it will be considered spam or not ... good luck
Click to expand...
Click to collapse
With Security Error??? And not recognized on my Windows PC
con el logo de Security Error?? Y no es reconocido en mi computadora con Windows
Jan Philipp said:
Right. You need a running Linux. So you can download a Linux-Live-CD and run it from CD/DVD-drive without installation or you can set up a Linux with VirtualBox which is done in a couple of minutes.
Sadly I have no knowledge about windows solutions. Sorry.
Click to expand...
Click to collapse
not working
the sdb partitions not visible on the linux terminal
MoixyS2 said:
With Security Error??? And not recognized on my Windows PC
con el logo de Security Error?? Y no es reconocido en mi computadora con Windows
Click to expand...
Click to collapse
Si, despues de arreglar el error de múltiples particiones pude volver a entrar al modo download (mantener volumen arriba y poner el usb, aunque creo que ya lo sabes)... Sino pareciera que la única forma que te queda es volver a forzar ese modo de corrupción haciendo puente, pero es un lio, e igualmente necesitarías lo de Linux creo :/
If, after fixing the error of multiple partitions I was able to re-enter the download mode (keep volume up and put the usb, although I think you already know) ... But it seems that the only way you have is to re-enforce that Corruption mode making bridge, but it's a mess, and you'd also need the Linux thing I think: /
superking123 said:
Si, despues de arreglar el error de múltiples particiones pude volver a entrar al modo download (mantener volumen arriba y poner el usb, aunque creo que ya lo sabes)... Sino pareciera que la única forma que te queda es volver a forzar ese modo de corrupción haciendo puente, pero es un lio, e igualmente necesitar
Click to expand...
Click to collapse