Hi people, I'm new to snapdragon soc and have been using Mtk devices till now. I am not able to extract the stock recovery.img from my phone through adb shell (su error) and I really need the stock recovery.img for moto xt1643.
I want to use it with Recovery Switcher app to switch between stock and custom recovery quickly(if it works) without restoring the entire firmware.
Can anyone please upload the stock recovery.img for moto g4 plus xt1643 (3gb Indian variant)
Also, can someone please tell me if I can restore just my stock recovery using the fastboot and adb shell and not the entire firmware? If yes then please tell how?
Thanks a lot in advance people.
*****************************************************
{ Lastly, I'm sorry guys for my flop guide to root moto g4 plus(closed thread now). I don't know it was sort off crazy. It booted after root (I think it never rooted properly then I think flashing error sortta thing) and after doing again I too got bootloop like u all. I know its totally unexpected and I'm really sorry for your loss. I swear I'll double rather triple check before posting. I'm sure u guys got it all fixed now. I hope no hard feelings guys. I'm still new to SD . Tinkered with mt6572 n mt6589 only yet. Deep apologies once again. N yeah if u have any knowledge regarding the recovery.img then plz help. Thanks for the encouragement. }
Attached
Silesh.Nair said:
Attached
Click to expand...
Click to collapse
Thanks a million. How to push it on my phone (recovery switcher didn't work). Help really appreciated.
Reboot to fast boot mode, then
fastboot flash recovery recovery.img
Sent from my Moto G (4) using Tapatalk
Silesh.Nair said:
Reboot to fast boot mode, then
fastboot flash recovery recovery.img
Sent from my Moto G (4) using Tapatalk
Click to expand...
Click to collapse
I tried it already mate. It gives Image not signed or corrupt error and on going to recovery mode it's still twrp.
Reboot to recovery after the flash command.
Sent from my Moto G (4) using Tapatalk
Got it. Improper download. I just downloaded it again n tried n voila! Back on stock recovery
Silesh.Nair said:
Attached
Click to expand...
Click to collapse
Is this latest recovery version 24.139-23.1 or older 24.139-13.1 ?
23.1
Sent from my Moto G⁴ Plus using Tapatalk
Can we use this in flashfire
Silesh.Nair said:
Attached
Click to expand...
Click to collapse
Can you provide the stock recovery for npj25.93-14?
Silesh.Nair said:
23.1
Sent from my Moto G⁴ Plus using Tapatalk
Click to expand...
Click to collapse
Do you have the ROM 25-93-14 xt1626 recovery stock?
aakashpai said:
Can we use this in flashfire
Click to expand...
Click to collapse
Do you have the ROM 25-93-14 xt1626 recovery stock?
Guys! Just download the Stock ROM (which ever build u want), you can easily find one in the discussion threads! Extract the recovery.img from it and then flash it through fastboot! Easy as is! As mentioned in the previous posts!
[/COLOR]
Silesh.Nair said:
Attached
Click to expand...
Click to collapse
Can you provide latest build of Recovery.img for same
---------- Post added at 05:09 PM ---------- Previous post was at 04:41 PM ----------
Silesh.Nair said:
Attached
Click to expand...
Click to collapse
Im on Naugat Stock Build no. NPJS25.93-14-13, Restore From Twrp. Can I Flash This For Back In Stock Recovery Img.
solankijay01 said:
[/COLOR]
Can you provide latest build of Recovery.img for same
---------- Post added at 05:09 PM ---------- Previous post was at 04:41 PM ----------
Im on Naugat Stock Build no. NPJS25.93-14-13, Restore From Twrp. Can I Flash This For Back In Stock Recovery Img.
Click to expand...
Click to collapse
Link for NPJS25.93-14-13 stock recovery image. Should be flashable in TWRP or fastboot.
TWRP - Download image to your device. Reboot to TWRP. Tap Install, then Install image. Select recovery image and select recovery as the image type. Flash. Then reboot to recovery again.
https://drive.google.com/open?id=1NGl0jaNXzRF-8Wgvjiry_HVU1Wnp-w0t
File size: 16 MB
md5 checksum: bc59f42beee0c81006f37c09ea463922
Source: NPJS25.93-14-13 stock ROM.
Related
And HERE it Is!!!! I'm too tired to make a long thread.. I need to sleep hahah I'll make a proper thread tomorrow if he doesn't..
quickist way... be bootloader unlocked and then boot the image in the image folder of the zip
Unzip the zip to your computer.
fastboot boot CF-Auto-Root-victara-victaratmo-xt1095.img
Make sure it's fastboot boot.. not fastboot flash.
It will reboot, reboot again and then you're good
Now go buy chainfire a beer
http://download.chainfire.eu/596/CF-Root/CF-Auto-Root/CF-Auto-Root-victara-victaratmo-xt1095.zip
This is not a flashable zip
What state does the phone have to be in to fastboot? I get waiting for device in normal phone OS and in recovery.
I can adb reboot to recovery, so I know everything is set up PC wise.
From bootloader I get "cannot load _______.img : no error"
---------- Post added at 01:10 PM ---------- Previous post was at 01:04 PM ----------
Got it I think. Your command in the OP has it ending in .img not .zip
EDIT....still getting binary not installed. I've got to go to work, but idk why this is the first phone I've ever struggled with so many things. Could be because we still don't have ANY working official images.
---------- Post added at 01:13 PM ---------- Previous post was at 01:10 PM ----------
Got it. Had to unzip the file and flash the image like you said.... I read wrong my bad.
Thanks
graffixnyc said:
And HERE it Is!!!! I'm too tired to make a long thread.. I need to sleep hahah I'll make a proper thread tomorrow if he doesn't..
quickist way... be bootloader unlocked and then boot the image in the image folder of the zip
Unzip the zip to your computer.
fastboot boot CF-Auto-Root-victara-victaratmo-xt1095.img
Make sure it's fastboot boot.. not fastboot flash.
It will reboot, reboot again and then you're good
Now go buy chainfire a beer
http://download.chainfire.eu/596/CF-Root/CF-Auto-Root/CF-Auto-Root-victara-victaratmo-xt1095.zip
This is not a flashable zip
Click to expand...
Click to collapse
Is the boot.img for Lollipop based on the .5 or .6 release?
BrokenWall said:
Is the boot.img for Lollipop based on the .5 or .6 release?
Click to expand...
Click to collapse
It's boot img agnostic.. meaning you boot this boot.img, it actually takes the current boot.img on the device and injects root into it. So it uses whatever boot.img is currently on the device. So if you are on the .5 kernel it should work, if you're on the .6 kernel it works
graffixnyc said:
It's boot img agnostic.. meaning you boot this boot.img, it actually takes the current boot.img on the device and injects root into it. So it uses whatever boot.img is currently on the device. So if you are on the .5 kernel it should work, if you're on the .6 kernel it works
Click to expand...
Click to collapse
Awesome, and I will make sure I give Chainfire some money, I will probably just pickup SU Pro
Didn't want to run into boot loop because it was meant for a particular kernel
Is it just for xt1095 or will also work with 1092?
Sent from my XT1092 using Tapatalk
blinkin said:
Is it just for xt1095 or will also work with 1092?
Sent from my XT1092 using Tapatalk
Click to expand...
Click to collapse
It was made for the 1095. You can give it a try and let us know. If it fails it doesn't screw up anything (I don't think, since in testing it failed for me many times before he got the bugs worked out) Theoretically it should work as I said it's boot.img
graffixnyc said:
It was made for the 1095. You can give it a try and let us know. If it fails it doesn't screw up anything (I don't think, since in testing it failed for me many times before he got the bugs worked out) Theoretically it should work as I said it's boot.img
Click to expand...
Click to collapse
Running Lollipop on XT1097, and rooted with this. Everything going good.
Thx u all
beelzebu said:
Running Lollipop on XT1097, and rooted with this. Everything going good.
Thx u all
Click to expand...
Click to collapse
Can confirm on XT1097. Man this is amazing!
Anyone has flashed twrp?
Anyway thank you all!
Thanks.
Is there a step-by-step for this? I never rooted any of my Note series phones, so it's been a while.
1. unlock bootloader from moto site (follow instructions there) ALL OF YOUR DATA WILL BE WIPED - BACKUP EVERYTHING FROM INTERNAL STORAGE
2. ensure that you have fastboot / mfastboot / android SDK installed and setup (including PATH)
3. enable usb debugging on your phone
4. ensure that you have the appropriate drivers for your device installed
5. reboot to bootloader
6. check to make sure you have the correct drivers installed
7. type fastboot boot CF-Auto-Root-victara-victaratmo-xt1095.img
8. phone will reboot.
All of this is in the OP. good luck
Disclaimer
you alone are responsible for the health of your device, if you are at any point worried about causing damage, do not proceed. I will not buy you a new phone if you break yours.
byt3b0mb said:
1. unlock bootloader from moto site (follow instructions there) ALL OF YOUR DATA WILL BE WIPED - BACKUP EVERYTHING FROM INTERNAL STORAGE
2. ensure that you have fastboot / mfastboot / android SDK installed and setup (including PATH)
3. enable usb debugging on your phone
4. ensure that you have the appropriate drivers for your device installed
5. reboot to bootloader
6. check to make sure you have the correct drivers installed
7. type fastboot boot CF-Auto-Root-victara-victaratmo-xt1095.img
8. phone will reboot.
All of this is in the OP. good luck
Disclaimer
you alone are responsible for the health of your device, if you are at any point worried about causing damage, do not proceed. I will not buy you a new phone if you break yours.
Click to expand...
Click to collapse
Muchas gracias! Here we go. I saw others had success with XT1097, so I'm going for it.
Working on XT1092 with XT1095 5.0 firmware
Any Canadians with a Telus model try this out? I believe Telus Moto X (2014) is XT1097 as well.
graffixnyc said:
And HERE it Is!!!! I'm too tired to make a long thread.. I need to sleep hahah I'll make a proper thread tomorrow if he doesn't..
quickist way... be bootloader unlocked and then boot the image in the image folder of the zip
Unzip the zip to your computer.
fastboot boot CF-Auto-Root-victara-victaratmo-xt1095.img
Make sure it's fastboot boot.. not fastboot flash.
It will reboot, reboot again and then you're good
Now go buy chainfire a beer
http://download.chainfire.eu/596/CF-Root/CF-Auto-Root/CF-Auto-Root-victara-victaratmo-xt1095.zip
This is not a flashable zip
Click to expand...
Click to collapse
Thank u... It is working perfectly
We now need to wait for Exposed and the fun begins with a lollipop taste....
beelzebu said:
Running Lollipop on XT1097, and rooted with this. Everything going good.
Thx u all
Click to expand...
Click to collapse
You just ran these steps and good to go? no problems with modem/radio and or imei? I also have an xt1097 but I'm afraid to brick my beloved X in the process haha
JoaoGuiPan said:
You just ran these steps and good to go? no problems with modem/radio and or imei? I also have an xt1097 but I'm afraid to brick my beloved X in the process haha
Click to expand...
Click to collapse
Just need to backup modem fsb and pds and then flash tmo factory images, after that sideload de OTA, refresh your modem an from there you are good to go.
blyndfyre said:
Any Canadians with a Telus model try this out? I believe Telus Moto X (2014) is XT1097 as well.
Click to expand...
Click to collapse
Did you get lollipop running on your telus moto x? If so what process did you follow.
Jesus, will non unlocked ever get root?
After updating my e700h to stock 5.1.1 i had rooted it successfully using KingRoot
Now I need to flash xposed framework zip file that needs a custom recovery
I tried TWRP for kitkat and it didnt work
I even tried a lolipop compatible CWM for E5 and it was very funny and useless
So can anyone compile any custom recovery for E7 running 5.1.1
Here's the img file of the stock recovery
mega.nz/#!ocoThQ7A
Thanks
hashiesh said:
After updating my e700h to stock 5.1.1 i had rooted it successfully using KingRoot
Now I need to flash xposed framework zip file that needs a custom recovery
I tried TWRP for kitkat and it didnt work
I even tried a lolipop compatible CWM for E5 and it was very funny and useless
So can anyone compile any custom recovery for E7 running 5.1.1
Here's the img file of the stock recovery
mega.nz/#!ocoThQ7A
Thanks
Click to expand...
Click to collapse
It will be available soon and could you upload boot and recovery to google drive or devhost.
nepalbiraj said:
It will be available soon and could you upload boot and recovery to google drive or devhost.
Click to expand...
Click to collapse
Uploaded, Check them out & help us giving custom recovery
https://drive.google.com/folder/d/0B_8xPQyhA4WxRHRkNWFZYnZUblU/edit
nepalbiraj said:
It will be available soon and could you upload boot and recovery to google drive or devhost.
Click to expand...
Click to collapse
Thanks a lot ... I tried to reply to your post but unforunately I'm less than 10 posts old
Here are the files
https //) drive.google.com/a/hashiesh.com/folderview?id=0BxgiSTfvJheVYm04MUo5NmdBcDg&usp=sharing
Thanks a lot
Me too. Please make cusTom recovery for e7 running 5.1.1
Waiting for the recovery guys please help!
i tried the custom recovery in this link
http://forum.xda-developers.com/gal...ry-twrp-touch-recovery-sm-e700-t3267563/page5
but after flashing through flashify i got stuck on logo...
my device is E700H running 5.1.1
what should i do to make twrp work?
crimson35th said:
i tried the custom recovery in this link
http://forum.xda-developers.com/gal...ry-twrp-touch-recovery-sm-e700-t3267563/page5
but after flashing through flashify i got stuck on logo...
my device is E700H running 5.1.1
what should i do to make twrp work?
Click to expand...
Click to collapse
Try the lollipop twrp it has been built last night heres the thread http://forum.xda-developers.com/showthread.php?t=3267563
Press thanks if it works for you
---------- Post added at 12:14 PM ---------- Previous post was at 12:08 PM ----------
hashiesh said:
After updating my e700h to stock 5.1.1 i had rooted it successfully using KingRoot
Now I need to flash xposed framework zip file that needs a custom recovery
I tried TWRP for kitkat and it didnt work
I even tried a lolipop compatible CWM for E5 and it was very funny and useless
So can anyone compile any custom recovery for E7 running 5.1.1
Here's the img file of the stock recovery
mega.nz/#!ocoThQ7A
Thanks
Click to expand...
Click to collapse
This recovery will not be funny I swear?here it is https://www.androidfilehost.com/?fid=24369303960682868 and the thread link http://forum.xda-developers.com/gal...recovery-twrp-touch-recovery-sm-e700-t3267563
@duonglam @rahulsajilekha @crimson35th
Press thanks if it works for you.
need help plzz
nepalbiraj said:
Try the lollipop twrp it has been built last night heres the thread http://forum.xda-developers.com/showthread.php?t=3267563
Press thanks if it works for you
---------- Post added at 12:14 PM ---------- Previous post was at 12:08 PM ----------
This recovery will not be funny I swearhere it is https://www.androidfilehost.com/?fid=24369303960682868 and the thread link http://forum.xda-developers.com/gal...recovery-twrp-touch-recovery-sm-e700-t3267563
@duonglam @rahulsajilekha @crimson35th
Press thanks if it works for you.
Click to expand...
Click to collapse
how to falsh .img using odin ??
Hatem hesham said:
how to falsh .img using odin ??
Click to expand...
Click to collapse
You can flash it with the app Flashify or I have just uploaded the odin flashable zip . So that it can be flashed directly. I suggest to use the odin method.
it keeps rebooting into recovery
nepalbiraj said:
You can flash it with the app Flashify or I have just uploaded the odin flashable zip . So that it can be flashed directly. I suggest to use the odin method.
Click to expand...
Click to collapse
I installed the recovery using odin
whenever I want to restart my mob. it keeps rebooting to the recovery menu ??!!
what do i do?
this is my 2nd attempt
i reflashed my stock rom then flashed the cfroot and then the img file and i get recovery loop
which part did i do wrong? i did the reflashing of stock cuz i was expecting that it would go smoothly with freshly flashed stock rom
Hatem hesham said:
I installed the recovery using odin
whenever I want to restart my mob. it keeps rebooting to the recovery menu ??!!
Click to expand...
Click to collapse
It looks like a bug. Meanwhile you can try to flash stock recov again and do it all over again. This time flash the twrp with odin and uncheck auto reboot and reboot it manually.
And avoid rebootinh to recovery from the system. Boot to recovery only through the hardware buttons. (3 button combo) volume up+home button+power button.
And the restart button is volume down+power long press it.
---------- Post added at 01:55 AM ---------- Previous post was at 01:52 AM ----------
crimson35th said:
what do i do?
this is my 2nd attempt
i reflashed my stock rom then flashed the cfroot and then the img file and i get recovery loop
which part did i do wrong? i did the reflashing of stock cuz i was expecting that it would go smoothly with freshly flashed stock rom
Click to expand...
Click to collapse
Reflash twrp with auto reboot option off. Follow the instructions I gave to hashem.
it worked !!
nepalbiraj said:
It looks like a bug. Meanwhile you can try to flash stock recov again and do it all over again. This time flash the twrp with odin and uncheck auto reboot and reboot it manually.
And avoid rebootinh to recovery from the system. Boot to recovery only through the hardware buttons. (3 button combo) volume up+home button+power button.
And the restart button is volume down+power long press it.
---------- Post added at 01:55 AM ---------- Previous post was at 01:52 AM ----------
Reflash twrp with auto reboot option off. Follow the instructions I gave to hashem.
Click to expand...
Click to collapse
thanks very much for ur help ... it finally worked
it worked ... thanks a lot ! looking forward for more mods
Hatem hesham said:
thanks very much for ur help ... it finally worked
Click to expand...
Click to collapse
You are most welcome:victory::victory:
---------- Post added at 02:57 PM ---------- Previous post was at 02:53 PM ----------
crimson35th said:
it worked ... thanks a lot ! looking forward for more mods
Click to expand...
Click to collapse
You're welcome. Good to hear that it works for you Press thanks.
nepalbiraj said:
It looks like a bug. Meanwhile you can try to flash stock recov again and do it all over again. This time flash the twrp with odin and uncheck auto reboot and reboot it manually.
And avoid rebootinh to recovery from the system. Boot to recovery only through the hardware buttons. (3 button combo) volume up+home button+power button.
And the restart button is volume down+power long press it.
---------- Post added at 01:55 AM ---------- Previous post was at 01:52 AM ----------
Reflash twrp with auto reboot option off. Follow the instructions I gave to hashem.
Click to expand...
Click to collapse
Sorry for replying here, I'm still below 10 posts so I cant reply to your original post
First: no words are enough to thank you for you effort. It's working and really amazing. Thanks a lot
But I noticed something: when I tried to flash a rom that I have just created, I got an error message "This rom is for e73g while this device is e5lte" I dont know whether this is a problem in my device or it's recovery related
BTW I'm trying to create a deodexed debloated stock rom
Thanks again
hashiesh said:
Sorry for replying here, I'm still below 10 posts so I cant reply to your original post
First: no words are enough to thank you for you effort. It's working and really amazing. Thanks a lot
But I noticed something: when I tried to flash a rom that I have just created, I got an error message "This rom is for e73g while this device is e5lte" I dont know whether this is a problem in my device or it's recovery related
BTW I'm trying to create a deodexed debloated stock rom
Thanks again
Click to expand...
Click to collapse
Thanks for thanking me??hashiesh.
This is not the problem of the device nor recovery. In the META-INF folder in the Rom zip there is a file names UPDATERSCRIPT. Open it in notepad++ or any other tool and remove the first 3 lines.
There should be something written assert. It checks the device name.
So remove it and you are good to go.
Attach or share the updaterscript here so that we can look at it.
After success you can share the ROM in here.
nepalbiraj said:
Thanks for thanking mehashiesh.
This is not the problem of the device nor recovery. In the META-INF folder in the Rom zip there is a file names UPDATERSCRIPT. Open it in notepad++ or any other tool and remove the first 3 lines.
There should be something written assert. It checks the device name.
So remove it and you are good to go.
Attach or share the updaterscript here so that we can look at it.
After success you can share the ROM in here.
Click to expand...
Click to collapse
Thank you for your information, I found the 3 lines of "asserts" but i'm trying to set the assert to "e5lte" and will update you if it worked.
Sure I will upload it and it will be the first time to upload a rom after years of modifying stock and custom roms without even creating a flashable zip file
I'm planning to create 3 roms
1. Stock deoedexed deknoxed rooted with busybox
2. same as 1 but debloated (I consider all samsung apps to be bloatware)
3. Will try to replace samsung core apps with google ones from stock nexus gapps
so wish me luck and remember that all these are thanks to your TWRP
nepalbiraj said:
Thanks for thanking mehashiesh.
This is not the problem of the device nor recovery. In the META-INF folder in the Rom zip there is a file names UPDATERSCRIPT. Open it in notepad++ or any other tool and remove the first 3 lines.
There should be something written assert. It checks the device name.
So remove it and you are good to go.
Attach or share the updaterscript here so that we can look at it.
After success you can share the ROM in here.
Click to expand...
Click to collapse
please check this
http://forum.xda-developers.com/galaxy-e-series/development/dev-e700h-stock-deodexed-t3293510
Ok folks you're here because you have the need to rootMM 6 or Nougat 7.0 Only
As of February 2017 you need 3 things
Unlocked Bootloader
Motorola Device Manger (drivers):Download
1) TWRP ( Recovery)
2) Modified kernel (F2FS fixes)
3) SuperSu 2.79 R3 systemless root
TWRP can be found Here: TWRP
Modified Kernel can be found here:TWRP & Modified kernel
Download both the modified kernel, either the MM one Or Nougat 7.0, depending on which OS you are using and download the modified kernel to your internal sd card ( Our external sdcard can't be read by TWRP, so all flashable zips must be in your internal sdcard)
Flash recovery through fastboot Code: fastboot flash recovery (name of recovery).img
Do not reboot but use the volume buttons on the phone to select recovery from the menu on the fastboot screen.
Now we can flash the Modified Kernel which you have previously downloaded to your internal sd card.
Flash the Kernel.
Now download SuperSu
SuperSu:SuperSu 2.79 R3
NEW FOR NOUGAT 7.1.1 ONLY
Unlocked bootloader
Motorola device manager Download:Download["]Moto Device Manager
Twrp recovery downloaded into the same folder as fastboot
Gaining root differs from 7.0 or 6.0, you can only root with magisks 13 or above if you are running any stock based rom or custom based rom that doesn't have built in root, you no longer need to flash the F2FS fixed kernel on 7.1.1
Magisks Thread :Magisks Thread
You need to flash Magisks to disable dm-verity otherwise your phone will not boot this is because the stock kernel checks for any modifications to the system
That's it
Thanks to @Alberto97 & @tomparr
Will be useful for noobies
Enviado desde mi XT1635-02 mediante Tapatalk
Do you suggest disabling force encryption. I'm rooted but encrypted currently. If disabling would make significant speed boost I'm willing to take the pain of setting-up apps and stuff from scratch and format userdata
Nil253259 said:
Do you suggest disabling force encryption. I'm rooted but encrypted currently. If disabling would make significant speed boost I'm willing to take the pain of setting-up apps and stuff from scratch and format userdata
Click to expand...
Click to collapse
I'm unecrytped and see real no gain, I think it's more of a placebo effect.
is that superSU better than Magisk?
Do you still need official bootloader unlocking ? aka no more warranty ? Thanks
razorsbk said:
Do you still need official bootloader unlocking ? aka no more warranty ? Thanks
Click to expand...
Click to collapse
Yes
Thank you.
Sent from my XT1635-02 using Tapatalk
Will all this work with Windows 10?
shawnsac2000 said:
Will all this work with Windows 10?
Click to expand...
Click to collapse
It will if you have the right drivers installed
punkerEVO said:
is that superSU better than Magisk?
Click to expand...
Click to collapse
It's confirmed that you'll have root with SuperSu 2.79 R3, Magisk's may cause Issues under certain circumstances.
I'ver tried to keep as simple as possible because there's 2 other threads with root method's that are not up to date.
Thanks
dedraks said:
Thanks
Click to expand...
Click to collapse
Lol OK I can see where this could get confusing now.
Thanks flashallthetime.
I misread your instructions though and I am in trouble. I misread the bit about copying the modified kernel to internal SD card; instead I copied to external SD card (as I have always done with previous devices). I now can't flash the modified kernel because the newly flashed TWRP 3.0.2 doesn't have access to the external SD card.
The current state of the device is that it is stuck at the unlocked warning screen. It says "ID: bad key", but after flashing a recovery, it says "ID: N/A".
Is this consistent with the kernel not being flashed, or do I have another issue?
If I get an OTG cable, can I flash the modified kernel that way with TWRP? Can this version of TWRP access an OTG USB device on Moto Z Play?
Anyone? Thanks so much!!
You can use fastboot to flash boot.img.
---------- Post added at 02:28 PM ---------- Previous post was at 02:25 PM ----------
punkerEVO said:
Lol OK I can see where this could get confusing now.
Click to expand...
Click to collapse
How?
dedraks said:
You can use fastboot to flash boot.img.
Click to expand...
Click to collapse
Is that to me? Which boot.img, where do I find it? Thanks!
raymosaurus said:
Is that to me? Which boot.img, where do I find it? Thanks!
Click to expand...
Click to collapse
Yes.
Extract from the ROM in this post:
https://forum.xda-developers.com/moto-z-play/development/rom-stock-7-0-t3553213
raymosaurus said:
If I get an OTG cable, can I flash the modified kernel that way with TWRP? Can this version of TWRP access an OTG USB device on Moto Z Play?
Click to expand...
Click to collapse
Should do fine. Did not test with this version, but using Chinese twrp I could mount and afterwards access OTG partition. Don't see a reason why this one should behave differently.
If you want to use fastboot, the command should be (from memory): fastboot flash boot boot.img
tag68 said:
Should do fine. Did not test with this version, but using Chinese twrp I could mount and afterwards access OTG partition. Don't see a reason why this one should behave differently.
If you want to use fastboot, the command should be (from memory): fastboot flash boot boot.img
Click to expand...
Click to collapse
For God's sake people , don't use the Chinese TWRP. 2 people that I know have mistakenly wiped their IMEI with that junk.
dedraks said:
You can use fastboot to flash boot.img.
---------- Post added at 02:28 PM ---------- Previous post was at 02:25 PM ----------
How?
Click to expand...
Click to collapse
I have a flashable zip of the Nougat stock boot.img
Here https://www.androidfilehost.com/?fid=457095661767138793
Recently I rooted nougat using 'BETA-SuperSU-v2.74-2-20160519174328-forced-systemless' zip. After that wifi wasnt working and sim card didnt get detected. I downgraded to 6.0 and the problem remained the same. I tried flashing lineage OS 14.1 but stucked into bootloop. Only 6.0 based roms are working, currently Iam using Lineage OS 13 ,wifi and sim card is working but 'security settings' stops working whenever i try to setup a pin or pattern for the lockscreen.
What can I do to get back to proper stock nougat or marshmallow?
Help!!
#noob
amans2274 said:
Recently I rooted nougat using 'BETA-SuperSU-v2.74-2-20160519174328-forced-systemless' zip. After that wifi wasnt working and sim card didnt get detected. I downgraded to 6.0 and the problem remained the same. I tried flashing lineage OS 14.1 but stucked into bootloop. Only 6.0 based roms are working, currently Iam using Lineage OS 13 ,wifi and sim card is working but 'security settings' stops working whenever i try to setup a pin or pattern for the lockscreen.
What can I do to get back to proper stock nougat or marshmallow?
Help!!
#noob
Click to expand...
Click to collapse
You should've just reflashed 7.0, I might be fuzzy with this one but once you upgrade I believe you can't downgrade. Try and reflash 7.0 stock and see what you get
cdiamond said:
You should've just reflashed 7.0, I might be fuzzy with this one but once you upgrade I believe you can't downgrade. Try and reflash 7.0 stock and see what you get
Click to expand...
Click to collapse
I am looking for the stock asian 7.0 firmware. Can't find any mirrors. Thought of OTA update through marshmallow again but the wifi isnt working.
Your device is xt1752 right?
Sent from my XT1575 using Tapatalk
@amans2274
You shouldn't ask here.
You have to flash the newest stock 6.0.x for your model.
There isn't 7.0 for fastboot.
dzidexx said:
@amans2274
You shouldn't ask here.
You have to flash the newest stock 6.0.x for your model.
There isn't 7.0 for fastboot.
Click to expand...
Click to collapse
i know how to flash it but the wifi and sim card isnt working..orelse wouldnt have asked..and sorry for posting in the wrong section
cdiamond said:
Your device is xt1752 right?
Sent from my XT1575 using Tapatalk
Click to expand...
Click to collapse
yes
amans2274 said:
yes
Click to expand...
Click to collapse
I mean I would do what the other guy said, flash the right files for YOUR device. And see if you can get to 7.0 via ota
Sent from my XT1575 using Tapatalk
cdiamond said:
I mean I would do what the other guy said, flash the right files for YOUR device. And see if you can get to 7.0 via ota
Sent from my XT1575 using Tapatalk
Click to expand...
Click to collapse
I did flash the correct files....but problem remains the same as i said in the main post.
Should i consider giving it in service centre because its still in warranty.
amans2274 said:
I did flash the correct files....but problem remains the same as i said in the main post.
Should i consider giving it in service centre because its still in warranty.
Click to expand...
Click to collapse
May not be in warranty - unlocked bootloader.
Read again this:
https://forum.xda-developers.com/moto-x-style/general/guide-flashing-stock-firmware-t3637235 #1 (important), #4 root,
https://forum.xda-developers.com/moto-x-style/help/to-stock-wi-fi-t3652039
Stock download - my signature.
RetAsia - single sim, RetAsiaDS - dual sim.
dzidexx said:
May not be in warranty - unlocked bootloader.
Read again this:
https://forum.xda-developers.com/moto-x-style/general/guide-flashing-stock-firmware-t3637235 #1 (important), #4 root,
https://forum.xda-developers.com/moto-x-style/help/to-stock-wi-fi-t3652039
Stock download - my signature.
RetAsia - single sim, RetAsiaDS - dual sim.
Click to expand...
Click to collapse
Zip ...58-5 is good.
Maybe you should flash modem(radio) twice.
Repeat only this:
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot flash bluetooth BTFM.bin
what basically i have to do?...paste each code twice in the cmd?...please bear with me really a noob
'fastboot flash partition gpt.bin' getting prevalidation error again n again
amans2274 said:
Zip ...58-5 is good.
Maybe you should flash modem(radio) twice.
Repeat only this:
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot flash bluetooth BTFM.bin
Click to expand...
Click to collapse
You should flash full stock 6.0.x, every command should end with ok.
/Only bootloader & gpt will end with error, doesn't matter/
Repeat(qouted) - all 5 commands and repeat 5 again.
---------- Post added at 09:28 AM ---------- Previous post was at 09:23 AM ----------
Give here screenshots from pc(cmd, fastboot flashing).
Or upload to GDrive and give link.
dzidexx said:
You should flash full stock 6.0.x, every command should end with ok.
/Only bootloader & gpt will end with error, doesn't matter/
Repeat(qouted) - all 5 commands and repeat 5 again.
---------- Post added at 09:28 AM ---------- Previous post was at 09:23 AM ----------
Give here screenshots from pc(cmd, fastboot flashing).
Or upload to GDrive and give link.[/QUOTE
Worked like a charm:good:Thank you sooo much.
Getting OTA Nougat now. can i flash lineage 14.1 through twrp on stock nougat?
Click to expand...
Click to collapse
amans2274 said:
dzidexx said:
You should flash full stock 6.0.x, every command should end with ok.
/Only bootloader & gpt will end with error, doesn't matter/
Repeat(qouted) - all 5 commands and repeat 5 again.
---------- Post added at 09:28 AM ---------- Previous post was at 09:23 AM ----------
Give here screenshots from pc(cmd, fastboot flashing).
Or upload to GDrive and give link.[/QUOTE
Worked like a charm:good:Thank you sooo much.
Getting OTA Nougat now. can i flash lineage 14.1 through twrp on stock nougat?
Click to expand...
Click to collapse
For any custom 14.1 you have to downgrade radios.
Again these commands , only 4 commands(without BT).
Click to expand...
Click to collapse
I can root the stock ROM 7.0 nougat with magistick
No network on any ROM (stock & LOS-based ROMs). I might have flashed the wrong baseband file, can someone please give me the baseband specifically for India? Baseband required - M8952_70030.25.03.62.01R ATHENE_INDIA_DSDS_CUST
meraj99 said:
I'm on RR Remix N and have TWRP 3.1.1 shreps for the recovery. I can flash RR without any issues but whenever I try flashing either a JX series ROM or a fully stock ROM, TWRP says 'Invalid Zip File Format'. I have access to both bootloader and recovery, everything else works fine. Can someone please guide me on what to do? Do I have to sideload the ROM via ADB? If so, please enlighten me about the procedure
Click to expand...
Click to collapse
Why not trying to reflash the twrp(may try another one from official website or of silesh nair on his thread).
I think you might have turn on md5 checksum or another this which keeps verifying the zip and no signature is found.
Reflashing is a good course as it do not erase any data of yours.
DgnrtnX said:
Why not trying to reflash the twrp(may try another one from official website or of silesh nair on his thread).
I think you might have turn on md5 checksum or another this which keeps verifying the zip and no signature is found.
Reflashing is a good course as it do not erase any data of yours.
Click to expand...
Click to collapse
I used 3 different versions of TWRP Still didn't help. And the MD5 checksums matched, zip signature verification has been disabled too
meraj99 said:
I used 3 different versions of TWRP [emoji14] Still didn't help. And the MD5 checksums matched, zip signature verification has been disabled too
Click to expand...
Click to collapse
Try this and report. After installing wipe cache, dalvik.
If flashing recovery is problem, reflash stock rom w/ stock recovery n boot ans try again to flash twrp, might sovle the issue
Link : https://drive.google.com/file/d/1EGS-uU1QBDbrP3G4lFUSVqDSHC_ZGpMR/view?usp=sharing
Sent from my Moto G4 Plus using Tapatalk
DgnrtnX said:
Try this and report. After installing wipe cache, dalvik.
If flashing recovery is problem, reflash stock rom w/ stock recovery n boot ans try again to flash twrp, might sovle the issue
Link : https://drive.google.com/file/d/1EGS-uU1QBDbrP3G4lFUSVqDSHC_ZGpMR/view?usp=sharing
Sent from my Moto G4 Plus using Tapatalk
Click to expand...
Click to collapse
can you please tell me how to use the stock recovery? It just says 'No Command' everytime I boot into it
meraj99 said:
can you please tell me how to use the stock recovery? It just says 'No Command' everytime I boot into it
Click to expand...
Click to collapse
Its power button followed by vol up, but hey that recovery ain't gonna help you. Im just saying you to reflash it as it will erase all the data of current twrp recovery which might interfere with another recovery(changes are negligible, but then too).
I gave you link to a 64-bit twrp made by dreamester and silesh nair. Try it and see if it works.
You can not flash stock ROM from TWRP or other custom recovery. You need a PC with Moto Drivers and fastboot tools installed. Then you have to flash the stock rom from fastboot (generally instructions are given inside rom zip in a file called 'flashfile.xml'). I can't say about flashing JX series ROM (maybe it needs you to be on stock first or something like that) but here are the files needed to install Motorola ADB and FASTBOOT drivers and ADB & FASTBOOT tools on windows pc:
https://firmware.center/software/Android/platform-tools/win/ and https://firmware.center/software/Motorola/
---------- Post added at 10:15 PM ---------- Previous post was at 10:11 PM ----------
meraj99 said:
can you please tell me how to use the stock recovery? It just says 'No Command' everytime I boot into it
Click to expand...
Click to collapse
To get into stock recovery press VOLUME UP while pressing and holding POWER button but you can't flash custom ROM or wipe SYSTEM from there. For that purpose use Official latest TWRP recovery from their website.
JackFrost said:
You can not flash stock ROM from TWRP or other custom recovery. You need a PC with Moto Drivers and fastboot tools installed. Then you have to flash the stock rom from fastboot (generally instructions are given inside rom zip in a file called 'flashfile.xml'). I can't say about flashing JX series ROM (maybe it needs you to be on stock first or something like that) but here are the files needed to install Motorola ADB and FASTBOOT drivers and ADB & FASTBOOT tools on windows pc:
https://firmware.center/software/Android/platform-tools/win/ and https://firmware.center/software/Motorola/
---------- Post added at 10:15 PM ---------- Previous post was at 10:11 PM ----------
To get into stock recovery press VOLUME UP while pressing and holding POWER button but you can't flash custom ROM or wipe SYSTEM from there. For that purpose use Official latest TWRP recovery from their website.
Click to expand...
Click to collapse
I already have these installed! But when I run RDS and connect my phone in fastboot mode to the computer, RDS doesn't detect it in the program. I mean, the device doesn't show up in the boxes below. But when I run 'fastboot devices' in CMD I can see my device connected. And can you pleeease tell me how to flash ROMs through the stock recovery?
meraj99 said:
I already have these installed! But when I run RDS and connect my phone in fastboot mode to the computer, RDS doesn't detect it in the program. I mean, the device doesn't show up in the boxes below. But when I run 'fastboot devices' in CMD I can see my device connected. And can you pleeease tell me how to flash ROMs through the stock recovery?
Click to expand...
Click to collapse
Stock recovery don't flash roms, thats why we use customs recovery. As he mentioned just flash the stock rom, enable usb debugging and oem unlocked. Just flash the files and again flash the recovery which ever suits you and thats it.
Note : take backup first as it wipes your internal storage.
DgnrtnX said:
Stock recovery don't flash roms, thats why we use customs recovery. As he mentioned just flash the stock rom, enable usb debugging and oem unlocked. Just flash the files and again flash the recovery which ever suits you and thats it.
Note : take backup first as it wipes your internal storage.
Click to expand...
Click to collapse
well, how do I flash...? When I try to flash using TWRP it gives the error. I've tried almost all available TWRP v3+ recoveries
meraj99 said:
well, how do I flash...? When I try to flash using TWRP it gives the error. I've tried almost all available TWRP v3+ recoveries
Click to expand...
Click to collapse
Go into bootloader and then flash the file linked below from computer.
Note : usb debugging is must.
Link : https://www.google.co.in/amp/s/foru...tock-rom-npjs25-93-14-4-march-1-t3608138/amp/
DgnrtnX said:
Go into bootloader and then flash the file linked below from computer.
Note : usb debugging is must.
Link : https://www.google.co.in/amp/s/foru...tock-rom-npjs25-93-14-4-march-1-t3608138/amp/
Click to expand...
Click to collapse
yoooo!!! IT worked! Thank you so much! ^_^
DgnrtnX said:
Go into bootloader and then flash the file linked below from computer.
Note : usb debugging is must.
Link : https://www.google.co.in/amp/s/foru...tock-rom-npjs25-93-14-4-march-1-t3608138/amp/
Click to expand...
Click to collapse
erm, my SIM isn't being detected... WiFi works fine
meraj99 said:
erm, my SIM isn't being detected... WiFi works fine
Click to expand...
Click to collapse
Just flash twrp and which ever rom you like, and see if they are working or not.
DgnrtnX said:
Just flash twrp and which ever rom you like, and see if they are working or not.
Click to expand...
Click to collapse
Not working
meraj99 said:
Not working
Click to expand...
Click to collapse
I think reflashing the stock rom is the only thing to do. Read carefully whatever is written in that thread. And see if all the commands are properly exicuted.
I dont know any work around for sim as i have never had that issue. Tell me if its solved or not for just a bit of knowledge.
Edit : just for reference you are not using moto g4 play device, are you?
Standard ROM and recovery cannot be flashed by TWRP, only in fastboot mode.
DgnrtnX said:
I think reflashing the stock rom is the only thing to do. Read carefully whatever is written in that thread. And see if all the commands are properly exicuted.
I dont know any work around for sim as i have never had that issue. Tell me if its solved or not for just a bit of knowledge.
Edit : just for reference you are not using moto g4 play device, are you?
Click to expand...
Click to collapse
nah, G4+. Problem is with the baseband
meraj99 said:
nah, G4+. Problem is with the baseband
Click to expand...
Click to collapse
I flashed that firmware 2 days ago and is working fine for me, try flashing baseband then. Idk link for it search in Google for it
DgnrtnX said:
I flashed that firmware 2 days ago and is working fine for me, try flashing baseband then. Idk link for it search in Google for it
Click to expand...
Click to collapse
that's what I'm looking for. I need the Indian baseband file, do you know where i can get it