Many of us have know that the newest update that was push 2.0.5 break root. Well, for those who didn't know, now you know. Let's me be clear, there is NOTHING TO BLOCK THE OTA UPDATE, unless you build your own firewall. That said, the mod that we had was to use sql and turn automatic OTA into manual thus unless you were looking for it, it shouldn't. Or something you did may accidentally turn it back to automatic.
That said, we had one report of successful revert back to the older firmware here from 2.0.5. I have made a suggestion to manually force the system to fail the boot 8 times and do a full wipe. And this should revert it back to the original firmware that came with the Nook HD/HD+. Well, in the future, this may no longer be the case, as newer Nook may come with 2.0.5 out of the box, but let's do this one step at a time, we aren't there yet and maybe better solution will come later. So, if you accidentally updated to 2.0.5, you should try the following.
Backup your naughty stuff that's on the internal storage (even if they are not naughty, do it so anyway)
Force the nook to fail at least 8 times. First you power the device off then hit the power button, and when it's trying to boot, hold on to the power button, and I think about 10sec after it will force poweroff. You timing have to be quite good and make sure it's not getting a success boot. You basically have to do that at least 8 times.
If you successfully did all that, it should revert back to the original firmware. I know that the 8 boot loop will reset it back to 2.0.0 from 2.0.2 because I did that before.
Try rooting it again.
I hope this help.
Interesting, I'm going to try and force the 8-loop reboot and set if I can get back to 2.04. I think then I also have to skip the out of box registration process as this automatically updates?
it Works
Confirmed !!
I have got my new Nook HD+ yesterday, and before I could root it, it was automatically updated to 2.0.5 by itself today.
So I did the 8 times boot manually, and the system was reset to the original firmware--2.0.4.
After the first boot by skipping the OOBE, I followed the "All-in-one" from someone0, and it works perfectly now with ADW launcher.
But I still cant get the titanium backup to run yet, it says SU error.
Thanks to someone0, leapinlar and verygreen for those great contribution :good:
haym said:
But I still cant get the titanium backup to run yet, it says SU error.
Thanks to someone0, leapinlar and verygreen for those great contribution :good:
Click to expand...
Click to collapse
You still need to run superuser once, did you do that?
Thank you for this very much. Is there no way to prevent updating to version 2.0.5 again? I came home, and my brother was playing on it, he told me something happened. I took a look, and it was updated to 2.0.5. Is there anyway to prevent it again in the future? Will the all-in-one basically disable updating? Since I did install that previously, and the version was still updated.
Sorry for the bother, and thank you very much. I will look into setting up a firewall.
Thank you again.
EDIT: I've conducted the 8-boot loop, and it should have loaded an earlier firmware; however, how would I bypass registration, or the version update check after the 8-boot loop? Thank you.
hiddenG. I had similar issue, I wanted to avoid update so I did a reset, but let it go too far and it updated me to 2005. I then did the 8 time interrupt and got back to 2004. I read here to google "nook color bypass OOTB" as the steps are the same for HD+.
It works
Only thing I'm having trouble running allinone. I don't think I'm doing it right. THe unregistered hd+ lists you as "test" and you have connectivity but no browser. I'm figuring I need to sideload a launcher and I'm looking into how to do that. I do have adb.
If you've registered you might have to reset and catch it as soon as you get to the language screen. You hold volume up. and touch lower left, then lower right to bring up "factory" screen. Then, holding vol up, touch lower right to bring up bypass OOTB.
Dave
Mine automatically updated even though I had automatic update blocked with sqlite. Furthermore, I no longer have access to content I previously purchased on that nook! I can't even download the nook app to fix, it keeps crashing when trying to sync.
Ps, if I re root using reset and skip oobe, then I still won't have access to my content, no?
Sent from my BNTV600 using xda app-developers app
I guess not, you're not registered at all.
dave
Thanks dbrons, that solved my problem. Thank you very much.
Is there anyway to get rid of the "your library is syncing" notification when you use OOBE without turning notifications off entirely?
Ferrian said:
Is there anyway to get rid of the "your library is syncing" notification when you use OOBE without turning notifications off entirely?
Click to expand...
Click to collapse
I also have the same question.
In addition, is there any way to get the "TEST's NOOK" text in the notification bar to be replaced with my own name?
someone0 said:
... unless you build your own firewall.
Click to expand...
Click to collapse
I'm actually curious if this would work. When it suddenly went into 'must get 2.05' mode and I 8-reset it, I disconnected internet right after letting it register...and it pushed me into a loop trying to check for updates and wouldn't proceed.
Any suggestions on domains to be blocked if I were to try this again?
Ferrian said:
Is there anyway to get rid of the "your library is syncing" notification when you use OOBE without turning notifications off entirely?
Click to expand...
Click to collapse
+1
And also, is there any way to get rid of the App Update notifications. There are some that I don't want to update but the notifications keep coming back after clearing them.
So pissed off now....for no reason, when booting up this time my Nook went into a boot loop and reset itself! It wiped everything from internal storage, effectively killing off hours I had spent last night getting everything set on it with apps and root. (this was all after using the All-in-one batch file which supposedly turned off automatic OTA updates)
someone0 said:
You still need to run superuser once, did you do that?
Click to expand...
Click to collapse
Yes, I did, and it works now, Thank you
I spent most the day yesterday toying with getting my Nook HD running again after the 2.0.5 update. I did find that by performing the 8 boot reset back to 2.0.0 and going through the setup process and immediately powering the HD off as soon as it began to check for updates that after I restarted the unit it would bypass the update upon powering it up again and completing the setup. After which I ran someone0's Allinone script which did give me root and load the Google market place. I was able to then load all my apps from the market and change the launcher etc.... After leaving the HD powered on and connected to the network while idle the unit did an auto OTA to 2.0.5 and rebooted on its own. Upon restart, I was at 2.0.5 and root was gone, but the update left the Google Market and all my apps and data in place. Granted I don't have root, but atleast I'm able to customize my own launcher and load and side load any apps I've see fit that dont require root.
Quote:
"I spent most the day yesterday toying with getting my Nook HD running again after the 2.0.5 update. I did find that by performing the 8 boot reset back to 2.0.0 and going through the setup process and immediately powering the HD off as soon as it began to check for updates that after I restarted the unit it would bypass the update upon powering it up again and completing the setup. After which I ran someone0's Allinone script which did give me root and load the Google market place. I was able to then load all my apps from the market and change the launcher etc.... After leaving the HD powered on and connected to the network while idle the unit did an auto OTA to 2.0.5 and rebooted on its own. Upon restart, I was at 2.0.5 and root was gone, but the update left the Google Market and all my apps and data in place. Granted I don't have root, but atleast I'm able to customize my own launcher and load and side load any apps I've see fit that dont require root."
This was the exact procedure that worked for me, other than the fact that my Nook HD+ 8 boot reset to 2.0.4. So its definitely a workable solution until the awesome devs come up with a true solution!
Sent from my BNTV600 using xda premium
can connect to pc
i got it to connect once and adb reconized it i was able to see its serial number by doing adb devices and then tries root and after the first boot my computer would not fully see it it would pop up in my computer and then dissappear it would continue to do this while i had adb enabled after i turned this off it would stop and the nook would show up in my computer but as soon as i turned adb on it would go all crazy and show and dissappear in my computer any help here would be great
Just sit tight I'm sure people are working on root for 2.0.5.
someone0 said:
Just sit tight I'm sure people are working on root for 2.0.5.
Click to expand...
Click to collapse
i have bypassed the update im on 2004
Whenever I boot it up it says "Unfortunately, System UI has stopped.". It does allow me to hit ok, however when I hit ok I have about 1 second before it pops up again. Due to the passcode lock on my phone I am unable to get past the lockscreen as it wipes the input box everytime the popup box pops up. Despite the System UI apparently failing everything does seem to be functional behind the pop up. In the 1 second periods between pop ups I am able to interact with it. The status bar and the buttons on the bottom are not visible, however the rest of the lockscreen (including widgets) is.
The phone is rooted, however I had not gotten around to installing a custom bootloader yet. Debugging is enabled, however the device is listed as "offline" according to "adb devices". Due to this I am unable to install TWRP so as to flash the zip to disable xposed.
All of the above is still true in safe mode, the exact same thing happens.
Does anyone know how to fix this? I would prefer to keep the data on it, however if nothing else a factory reset would be fine.
Update: Solution was to do this. The offending xposed module was xhalofloatingwindow. I have managed to reproduce the error multiple times, so it would appear that xhalofloatingwindow is incompatible with the LG G2 (AT&T) on 4.2.2.
It is only the latest version that is incompatible. Uninstall Beta 2.16 and install 2.14 then it will work. Came across your post as I was searching in tapatalk for the official thread to report this in. Hope it helps.
Sent from my VS980 4G using xda app-developers app
FIXED ISSUE WAS CAUSED BY XPOSED
Please see bottom of post in red for issue and fix.
I am completely lost to what is happening / causing this.
My last steps re-traced:
Download GMail 5.0
Sent to phone
Used Titanium backup to remove old Gmail
Installed New Gmail
Rebooted Device
When it booted back up, i was present with a Newly wiped / formatted phone
All user apps - all Gapps have disappeared, Its like i have freshly installed a new ROM
Expect it still has my Accounts, Alarms and configurations to Nav Bar etc
(Running PAC Rom, but this is irrelevant as this has happened to me on 4 different roms now,
Stock, CM, AOSP)
Any idea what causes this, Just need a small push in the right direction please.
Issue was caused by Xposed, I installed a Module i have used many times before Xinstaller
It was this that broke the device.
Well not this specificity, But Xposed no longer responds, making your device boot up in a Clean State with no apps installed.
If you attempt to reinstall a App, it wont work, as the App still is installed on your device.
Disable Xposed by flashing the "xposed-disabler-recovery.zip" that is generated in the Sdcard when you first install Xposed.
If not please see here:
http://forum.xda-developers.com/xposed/xposed-installer-versions-changelog-t2714053
Something for future reference or if anyone else has a similar issue - Disable xposed boot up and clean up
Howdy,
I got a new Note 4 from Bell Mobility about a month ago...
I updated the software, rooted it and installed the Wanam modified Xposed framework.
I have lost the automatic rotation, except for the built in camera software. Nothing else will auto-rotate. Checked the gyroscope and checked a few 'leveler' applications - all tests pass. Oddly I noticed the camera software still auto-rotates, no idea why it is special.
I tried the Wanam Xposed module to 'Enable all rotation angles' it has made no difference. With screen rotation software, currently have "Rotation - Orientation Manager by Pranav Pandey" installed. Auto-Rotate On and Forced Auto-Rotate neither option will rotate the screen when I turn my phone. If I choose Forced Landscape, it will go into Landscape mode. The only way to return to Portrait though is to use one of the Force Portrait options though.
My other issue is with turning on Device Encryption... Using SuperSU Pro for su..
If I just go through the prompts without changing anything, it reboots but doesn't encrypt.
First I tried installing as a system app so I could use the Disable function in the Android Application Manager, as I did with my Note 2, SuperSU tells me "Not (currently) available in system-less root mode".
If I turn off "Enable Superuser" in SuperSU, encryption enables properly, but I am unable to turn the "Enable Superuser" again, it says it has to update, but the fails. Suggests a reboot and try again. Sadly, this did not help.
I had success with one of the exploit root methods, KingRoot. While this worked when my phone was encrypted, it wasn't stable and kept popping up stuff. I tried to replace it with SuperSU, there are a few guides written to do just that, but they all indicate that it is very hard to get rid of, regardless, none of the guides worked for me. I ended up resetting the phone and starting over...
I tried the CLI command to start the device encryption from a # prompt..
vdc cryptfs enablecrypto inplace password 1234567890abcdef
The phone rebooted a couple times, but took a very long time (hour plus) to come back to the Android Lock-Screen.. But still a non-encrypted device. If I intrupted the process because I thought it had crashed, it started up and immediately told me something when wrong with the encryption and I need to use Recovery to reset the device..
As for root methods, I was using the CF-Auto-Root at first, trying to look for solutions to both issues, I tried a few ways of getting SuperSU installed.. The last time I reset I tried the "SkipSoft Unified Android Toolkit" method. 'Grasping at straws' to get SuperSU installed into /system so can use the Applicaiton Manager to disable and enable it...
My mobile's specifics, if it matters..
Samsung Galaxy Note 4
Model number - SM-N910W8
Android Version 5.1.1
Baseband version - N910W8VLU1COK3
Build number - LMY47X.N910W8VLU1COK3
Currently have the Team Win Recovery Project v2.8.7.0 recovery software installed.
I am looking for suggestions for both issues, but really want to avoid resetting the phone if I can at all possible... Yes, I have Titanium Backup Pro installed, but have never actually gotten a restore to properly restore all my applications and data... I rely on it now just for the Uninstall and Freeze features.
For an update,
I also noticed that rotation works on the Lock Screen and in the camera applicaiton.
If I rotate my screen on the Lock Screen, the red handset picture and camera icons rotate.
If I rotate in the camera application, nothing changes position, but all the icons rotate as well.
I'm still completely stuck though, open to suggestions...
For rotation, it is likely caused because you removed the com.thingy.facebook system app. I tried removing it because I thought is was bloatware but read somewhere that messing around with it cause the auto rotate and pedometer to fail. I fixed it by reflashing the rom without data wipe then never removed it again. Page Manager is safe to remove though.
uchihakurtz said:
For rotation, it is likely caused because you removed the com.thingy.facebook system app. I tried removing it because I thought is was bloatware but read somewhere that messing around with it cause the auto rotate and pedometer to fail. I fixed it by reflashing the rom without data wipe then never removed it again. Page Manager is safe to remove though.
Click to expand...
Click to collapse
Thank you,
I had it frozen for a while, completely uninstalled it, trying to see if lack of space was why I couldnt' get SuperSu to become a System App..
I will try to put the facebook app back to see if that helps. Hoping I don't need to do a ROM reset, but if that is what it takes.
kevinds said:
Thank you,
I had it frozen for a while, completely uninstalled it, trying to see if lack of space was why I couldnt' get SuperSu to become a System App..
I will try to put the facebook app back to see if that helps. Hoping I don't need to do a ROM reset, but if that is what it takes.
Click to expand...
Click to collapse
Thank you http://forum.xda-developers.com/member.php?u=5047956
I tried installing FaceBook from the PlayStore, no change.. So I uninstalled it again.
Took a backup in Titanium Backup and in TWRP.
From the stock image, I extracted system.img.ext4 and used SkipSoft's application to make just this file Odin flashable..
Flashed it.. When I got back to Android, my phone hadn't reset (what I was going for ), rotation is working, SuperSU still giving root access
I went back into Titanium Backup, the freshly installed apps were listed on top, because there was no backup of them.
Froze each, one at a time and checked the rotation after each.. Froze all the apps with no backups, and rotation stayed working, which I thought was odd for what fixed it.
So.. The Facebook applications are all frozen, as they were before I erased them the first time, and rotation still works. Hurray..
Now for the device encryption, I will keep messing with it.. Trying FlashFire to mount System as RW and to write the newest version of SuperSU, hopefully it will install to System this time.
Thank you again.
kevinds said:
Thank you http://forum.xda-developers.com/member.php?u=5047956
I tried installing FaceBook from the PlayStore, no change.. So I uninstalled it again.
Took a backup in Titanium Backup and in TWRP.
From the stock image, I extracted system.img.ext4 and used SkipSoft's application to make just this file Odin flashable..
Flashed it.. When I got back to Android, my phone hadn't reset (what I was going for ), rotation is working, SuperSU still giving root access
I went back into Titanium Backup, the freshly installed apps were listed on top, because there was no backup of them.
Froze each, one at a time and checked the rotation after each.. Froze all the apps with no backups, and rotation stayed working, which I thought was odd for what fixed it.
So.. The Facebook applications are all frozen, as they were before I erased them the first time, and rotation still works. Hurray..
Now for the device encryption, I will keep messing with it.. Trying FlashFire to mount System as RW and to write the newest version of SuperSU, hopefully it will install to System this time.
Thank you again.
Click to expand...
Click to collapse
This is amazing, can you please post the odin flashable file? I am having this exact problem right now because I removed it in TB. Is it just the facebook file that are flashed? Thanks so much in advance, you're saving my life here
Hi,
I am now always greeted with the B003 updater notification when I start my tablet. If someone has figured out how to stop the updater from running, I would appreciate if you could let me know how you did it. I have turned off the auto check for updates and auto download updates in the settings, but that hasn't seemed to help.
Thanks
I think I have figured it out. I installed Link2SD (didn't even realize it had not been installed on this tablet) and then used that to Freeze the app. It has disappeared from the app list now, so hopefully it wont be nagging me anymore.