3rd thread, about 4th rom flashed
constant issues with builds. have gone from stock to:
cm 6.1.3 -apps crashing, random crash notices i.e "phone book has crashed force close" - "the process com.android.phone has stopped unexpectedly"
cm 7 - random reboots, opening browser caused power cycle, wifi issues, lag (thread posted, no solutions at the forefront)
currently on tripnraver pre release. now another issue. no signal what so ever.
original baseband on this xperia x10a is .55. it is suggested to use with bands 52 or 49.
loading either of these basebands. which ive done. doesn't seem to fix the no signal problem. the description states should be backwards compatible even if appropriate bb is not installed on device. yet no luck.
attempting to flash either baseband fails to resolve this problem. currently trying to flash back to stock and try another full reinstall and baseband flash in flashtool.
any ideas would be a great help. having to flash x number of times between roms is getting quite time consuming
thanks everyone.
if you want to stay on the miui rom, you can flash the baseband patch located here and stay on whatever baseband works best for you (I'm on .55 and find it fantastic), then when you load the rom, go to dev tools>bad behaviour>crash the system server.
http://forum.xda-developers.com/showthread.php?t=1011608
Otherwise, I would recommend wolfbreaks cm 6.1.3, as it is the most stable. You must have done something wrong during installation as I never had an issue with his roms.
The only issue I have ever had with any rom is MiUi and thats because I used the wrong baseband. You must be doing something wrong for you to be having problems
if you want, try this flash, it's trips miui pre-final with the baseband patch implemented.
http://www.multiupload.com/KCKE9K2WKN
worked with my .54 baseband
thanks so much for the links to the baseband patches. i remember coming across a thread that posted it but unfortunately forgot to book mark. so im definitely going to go ahead and try with the patch installed. hopefully all works well
each rom ive flashed has been done properly according to instructions. cache wiped, dalvik, and full reset as per menu options in xrecovery.
one way or another i experienced lag for the most part, and as mentioned some random crashes. never had reset on wolfs rom just error messages at times. trips rom worked excellent, smooth and quick. hopefully with the patch implemented everything will work flawlessly
thanks you guys
*Updated
Flashed over rom with baseband patch. signal working. everything running smooth.
except for when using camera zoom. zoom default displays 0x. as soon as the option is selected it spawns an immediate force close
any patches? or similar outcome for anyone else?
i will outline my steps below so everyones up to speed on how i performed this flash.
- flashed back stock in SEUS
- root with one click (success)
- installed busy box (market)
- installed xrecovery apk
- booted into xrec
1. full factory reset
2. wipe cache
3. wipe dalvik cache
4. wipe battery stats
5. install custom zip from sd card
6. selected trips rom with bb patch implemented
5. reboot
Camera zoom doesn't work in most ROMs yet and the lag you were experiencing was likely just the FW "settling" it can take a little bit and a couple reboots sometimes for the phone to calibrate itself properly.
Sent from my X10i using XDA Premium App
thanks cmoney. maybe ill try my luck with cm7. give it a few reboots and hope for the best. great rom. im really loving trips iphonesque style
clean smooth and quick. everythings working great. hoping the zoom may get fixed soon enough. only other inquiry i have with regards to this rom is the apps2sd.
this feature is essential to myself personally. and it is not working as ive noticed on this rom. ive read a thread with regards to a fix for the last release. i checked the settings for an enable option in case the feature requires being manually set as active but nothing listed. within sd settings state reads as unavailable. if anyone has an answer as to whether this fix will function with the current pre release. ill be going ahead with completeling the flash and reporting what i find back on this thread.
thanks again everyone
Try Wolfbreaks rom. It's very very stable for me. It has cam and everything upto date.
im going to flash back to wolfbreaks updated 6.1.3 unless anyone can point me in the direction of a fix for trips rom.
the smooth and fluid feel of trips rom was brilliant. i am hopeful someone has directions for an apps2sd fix as i have flashed the build twice and the same issue has occured.
thesoundofsilence said:
im going to flash back to wolfbreaks updated 6.1.3 unless anyone can point me in the direction of a fix for trips rom.
the smooth and fluid feel of trips rom was brilliant. i am hopeful someone has directions for an apps2sd fix as i have flashed the build twice and the same issue has occured.
Click to expand...
Click to collapse
works for me on trips newest....
i just downloaded the new version 1.0
this is ridiculous. without the baseband patch. crash system server. no signal
now apps to sd is saying "apps2sd is not supported on this device"
this is an xperia x10, so obviously there must be something wrong here.
can anyone elaborate on exactly what to do about this because im going to attempt to flash back the rom, flash the bb patch right after, reboot. i assume this will only solve my signal issue. but this apps to sd is getting extremely frustrating and i can not figure out why it is not showing an enabled status.
- Flashed 1.0 with baseband patch - network signal resolved.
- apps to sd is STILL not working. and i really dont know what to do about this. everything else on this rom is perfect. is there something im missing? i came across a patch for apps2sd fix but this was for a previous version. would it be needed here? is there a setting that must be enabled first in order to start apps to sd as a service.
- as mentioned previously within the main menu, under sd card settings. message states "apps2sd is not supported on device" and on previous build would display "apps2sd unavailable". its simply impossible that the phone doesn't support it. as with every other rom the feature has worked. froyo would support it. the question is how do i go about enabling said feature?
thesoundofsilence said:
i just downloaded the new version 1.0
this is ridiculous. without the baseband patch. crash system server. no signal
now apps to sd is saying "apps2sd is not supported on this device"
this is an xperia x10, so obviously there must be something wrong here.
can anyone elaborate on exactly what to do about this because im going to attempt to flash back the rom, flash the bb patch right after, reboot. i assume this will only solve my signal issue. but this apps to sd is getting extremely frustrating and i can not figure out why it is not showing an enabled status.
- Flashed 1.0 with baseband patch - network signal resolved.
- apps to sd is STILL not working. and i really dont know what to do about this. everything else on this rom is perfect. is there something im missing? i came across a patch for apps2sd fix but this was for a previous version. would it be needed here? is there a setting that must be enabled first in order to start apps to sd as a service.
- as mentioned previously within the main menu, under sd card settings. message states "apps2sd is not supported on device" and on previous build would display "apps2sd unavailable". its simply impossible that the phone doesn't support it. as with every other rom the feature has worked. froyo would support it. the question is how do i go about enabling said feature?
Click to expand...
Click to collapse
I dunno man, it works fine for me, but I copied data from my 0.3.2 xrecovery image, so that might be why. try flashing that apps2sd fix for 0.3.2, should work fine
damn it. i just found that thread. found the links to the fixes. so far ive tried miui32_a2sd_fix.zip. and flashed that over with xrec prior to reboot. which did nothing.
there are two more links so im going to try those two flashes as well and hope that one of them will do the trick. if its working when utilizing .32 patches then ideally the bloody thing would have to work here. thanks for the input though dtox. much appreciated
I don't know what else to suggest man
From the feedback I see in the miui thread, everyone else is reporting it working!
Did you factory wipe, wipe cache partition, and wipe dalvik cache before install? then flash the miui 1.0.zip, and flash immediately the baseband patch then reboot into the rom.
Remember not all apps allow apps2sd so use something like android system info, go into the applications tab click on one, click manage and then see if the option "move to sd" is highlighted. Like I said check a few though, not all apps can be moved
i just replied in the dev section lol but yes i have gone ahead and checked the applications menu. specifically downloaded a file i have moved to sd on a previous occasion from the market.
nothing
the "apps to sd" selection is completely greyed out. no matter what application i click on or download. i did a full wipe, full install, and selected the apps2sd fix immediately after rom and bbpatch flash, prior to rebooting. issue still remains.
we'll see i guess. thanks again dtox
thesoundofsilence said:
i just replied in the dev section lol but yes i have gone ahead and checked the applications menu. specifically downloaded a file i have moved to sd on a previous occasion from the market.
nothing
the "apps to sd" selection is completely greyed out. no matter what application i click on or download. i did a full wipe, full install, and selected the apps2sd fix immediately after rom and bbpatch flash, prior to rebooting. issue still remains.
we'll see i guess. thanks again dtox
Click to expand...
Click to collapse
Try it again but without the fix...
i did that to it doesnt work i get the same message displayed
i tried with fix and without. another thing to note is that the rom itself says it should work with a different baseband as it has elements of unified. (which it doesn't) i had to flash the bb patch to get signal.
im not sure whats up with this but until i figure it out for a certainty ive flashed back over to wolf breaks rom. hopefully something will surface and i can give trips rom another go.
thesoundofsilence said:
i did that to it doesnt work i get the same message displayed
i tried with fix and without. another thing to note is that the rom itself says it should work with a different baseband as it has elements of unified. (which it doesn't) i had to flash the bb patch to get signal.
im not sure whats up with this but until i figure it out for a certainty ive flashed back over to wolf breaks rom. hopefully something will surface and i can give trips rom another go.
Click to expand...
Click to collapse
No idea man, like I said it is fine for everyone else so I'm so no big development will arise that will make it function with your phone....
maybe it has something to do with 10a. i dont know. but the point is it shouldn't even be doing this regardless. hypothetically if its froyo and it has apps2sd built in. it should work. its not the way ive flashed. the phone supports it. so my only conclusion the rom must not be as compatible as stated. and from reading different posts about the prev builds sometimes the patches worked at other times they didnt. and also the fact that the rom is claimed to work without the need for a bbpatch. yet without the patch instaled phone caught no single. i guess certain unexplainable glitches can be bound to happen at times but any how ill give it one last go.
if nothing comes out of that then im giving up on that build because it seems relatively hopeless.
lol I'm using an x10a...
Still man you're the only person reporting this. Don't you find that strange? What baseband are you using anyhow?
I'm on Exodus ROM, 1707 build.
Lightning SBTC kernel.
Pico CyanogenMod gapps.
My issue is that apps download normally but some (most of them) take way too longer than normal to install.
I tried Installing apps from apks and the same issue arises.
I reflashed the to, went back to kk and upgraded. Then flashed this ROM again. But no luck
Also After flashing CMOS 12 apps, I had 2 theme store. I had to remove one (the one without cyanogen logo).
But the issue is that after I apply a theme, the messenger, whatsapp and some other apps' fonts reset to default after sometime.
Please help to solve these issues!
About your issue of slow install, that has been quite the normal case with Lollipop in general, if you feel that apps are being installed at a slower rate then try some other ROM if same continues with other ROM then you'd have found that it's not the ROM's fault else its got something to do with the ROM, post a query to the OP of that ROM's thread.
There maybe some conflict in the theme manager due to you flashing COS12 apps. I'd recommend that you flash the ROM again and see if this issue persists without you flashing COS12 apps.
d3athwarrior said:
About your issue of slow install, that has been quite the normal case with Lollipop in general, if you feel that apps are being installed at a slower rate then try some other ROM if same continues with other ROM then you'd have found that it's not the ROM's fault else its got something to do with the ROM, post a query to the OP of that ROM's thread.
There maybe some conflict in the theme manager due to you flashing COS12 apps. I'd recommend that you flash the ROM again and see if this issue persists without you flashing COS12 apps.
Click to expand...
Click to collapse
Happens for almost all ROMS
Hi all, I am new here. I was referred by a friend who knows more about this than I do. I think I understand how to get fastboot and TWRP, so that is taken care of already. Now the problem with my OP2 running OxygenOS latest version, everything stock, is that it freezes up after unlocking, and the whole phone is just terribly throttled at this slow speed for a long time. All inputs are extremely delayed, and touchscreen is nearly unusable after the lag begins. There are so far two temporary fixes I found: 1) reboot phone 2)wait it out/keep unlocking until it doesn't lag. I also have been unable to make a copy of my internal storage via USB, as it gives unspecified error during copying. And lastly, the screen dims on its own sometimes at random while anything related to auto-brightness should be off. Fortunately, I was able to make a hard copy of my internal storage thru some wifi file manager apps. Now my friend pointed out that my phone's issues could be related to a bad kernel. To remedy this, he told me it would be good to flash a new kernel onto my phone. I considered changing roms to CM, but apparently a lot of functionality is lost when doing this. He told me that I could retain Oxygen OS while flashing a new kernel, but I am not sure how to do this. I came across a post in the android dev section regarding hydrogen os, and I read that it performs better than Oxygen OS, but has minor issues of its own. I am interested in flashing this rom/kernel (I am not sure which is which). Here is the link in that section of the forum I found http://forum.xda-developers.com/oneplus-2/development/rom-h2os-hydrogen-os-ota-clean-stable-t3195636. I see it says that it is working on Indian OP2, and running stock rom and stock kernel. Does this mean that my north american OP2 won't be able to get this rom? Also if it is the stock kernel, does that mean it is the same kernel as the one currently installed on my phone? Anyways, if anyone knows about my phone's problems, or has a way to fix it let me hear it please. Thank you!
Tzheng456 said:
Hi all, I am new here. I was referred by a friend who knows more about this than I do. I think I understand how to get fastboot and TWRP, so that is taken care of already. Now the problem with my OP2 running OxygenOS latest version, everything stock, is that it freezes up after unlocking, and the whole phone is just terribly throttled at this slow speed for a long time. All inputs are extremely delayed, and touchscreen is nearly unusable after the lag begins. There are so far two temporary fixes I found: 1) reboot phone 2)wait it out/keep unlocking until it doesn't lag. I also have been unable to make a copy of my internal storage via USB, as it gives unspecified error during copying. And lastly, the screen dims on its own sometimes at random while anything related to auto-brightness should be off. Fortunately, I was able to make a hard copy of my internal storage thru some wifi file manager apps. Now my friend pointed out that my phone's issues could be related to a bad kernel. To remedy this, he told me it would be good to flash a new kernel onto my phone. I considered changing roms to CM, but apparently a lot of functionality is lost when doing this. He told me that I could retain Oxygen OS while flashing a new kernel, but I am not sure how to do this. I came across a post in the android dev section regarding hydrogen os, and I read that it performs better than Oxygen OS, but has minor issues of its own. I am interested in flashing this rom/kernel (I am not sure which is which). Here is the link in that section of the forum I found http://forum.xda-developers.com/oneplus-2/development/rom-h2os-hydrogen-os-ota-clean-stable-t3195636. I see it says that it is working on Indian OP2, and running stock rom and stock kernel. Does this mean that my north american OP2 won't be able to get this rom? Also if it is the stock kernel, does that mean it is the same kernel as the one currently installed on my phone? Anyways, if anyone knows about my phone's problems, or has a way to fix it let me hear it please. Thank you!
Click to expand...
Click to collapse
I had the same issue with O2. I changed kernels and the problems persisted. A also word the device and started from scratch through fastboot and the issues persisted. I ended up on hydrogen and I've never looked back. There is a flashable zip in that thread for the newest full version .11. Follow the steps wipe everything besides internal storage, flash the full v11 zip and boot the phone. After this reboot to recovery (power and volume down). Flash the gapps and super su zip if you want root. After this you should be able to add your Google account and be good to go. One thing I did was remove all Chinese apps and the stock launcher. I use trebuchet launcher from cm 12.1. Phone runs incredibly smooth now. I recently started running AK kernel as well. The oxygen version works with hydrogen. I have been averaging between 5 and 7 hours of SOT for battery with up to 8 if I'm just watching videos. Hope this helps. The ROM is a little simpler and the notifications settings are different. But you can set apps to have priority notifications and they function similar to oxygens notifications at that point. Everything is in the thread if you have any questions I'll try to help you.
Hello.
At first, I am new in the forum, so hi to everybody and thanks for the job in this site.
I have a very big problem with Note 4 ( I can't use it right now). Since I rooted the phone and changed the rom (to Cyanogenmod 12) all apps stop constantly and in random way. I have tried everything (I think so), return to the stock rom (android 5.0.1), make wipes (cache, data...) and reinstall the rom from Samsung switch.
I don't know what to do.
More info: All apps stop but the gapps stop with more frequency. I sent the device to the technical service but they take it back because I have modified the software (knox 0x1).
Sorry for my english. I am from Spain.
Thanks.
Third party apps or system apps?
Did you install any battery saving or ram booster apps?
GrippingSphere said:
Third party apps or system apps?
Did you install any battery saving or ram booster apps?
Click to expand...
Click to collapse
All of them
No, I don't believe in those apps. The only thing that I did for imrpoving the performance was to intall CM12 (It works fine at first)
I thought that CM12 doesn't work well with the Fast Charging... Could it be?
Thanks.
It seems like you might've flashed a gApps package for an earlier version of Android than what Cm12 is (5.1.1).
Try a full device wipe, reflashing CM12 & a gapps for 5.1.1
Jishy420 said:
It seems like you might've flashed a gApps package for an earlier version of Android than what Cm12 is (5.1.1).
Try a full device wipe, reflashing CM12 & a gapps for 5.1.1
Click to expand...
Click to collapse
I tried that and It didn't solve the problem. I also reflashed the stock rom (with Odin). Without effect, the problem was not resolved...
Thanks for your help.
Hi, I'm here to ask for your help because I don't know what to do.
Since the update to xXx 9.6 no limits my Oneplus 5 runs in slow motion, the applications take a lot of time to open it is unusable. Even the startup animation is slow.
I've already reformatted everything, flash with unbrick tool but it's the same.
I have the impression that only when I format in F2FS it works normally but I can't find a compatible Rom. Thank for your help.
Have you tried another aosp rom or just the stock rom some tweaks of the xxx might be causing some issues
Thesuprememonkey said:
Have you tried another aosp rom or just the stock rom some tweaks of the xxx might be causing some issues
Click to expand...
Click to collapse
I have try xXx, Stock Rom and Lineage OS
mrsachou said:
I have try xXx, Stock Rom and Lineage OS
Click to expand...
Click to collapse
That's weird do you have any heavy syncing apps ?? When did you start noticing the problem ? immediately after 9.6xxx update or after installing a certain app ? Have you tried changing the kernels ? Try decrypting and then Omni since it's a stable 8.1 rom
Thesuprememonkey said:
That's weird do you have any heavy syncing apps ?? When did you start noticing the problem ? immediately after 9.6xxx update or after installing a certain app ? Have you tried changing the kernels ? Try decrypting and then Omni since it's a stable 8.1 rom
Click to expand...
Click to collapse
I start notice when i install the new Snapchat.
I'm gonna try thanks
You formatted the data (which wipes everything on your device ) or just wiped the partitions? If you completely formatted and are experiencing the exact same issue on LOS and xXx there are several possibilities -- 1) You have a hardware issue; 2) You are using corrupt or mismatched firmware; 3) A third party app is causing the issue. The last one is very easy to check--just boot your OP5 into Safe Mode and see if the issue persists. If you encountered the issue on stock OOS and did a clean install after formatting your data then it shouldn't be a firmware issue.
It's very important that you completely format all the data on your phone--not wipe the partitions or format them individually because you need a fresh start in case it's just an issue with corrupted data. My guess based on everything you wrote is that you have a hardware problem and need to have your phone serviced.