Im not responsible for any damage on you phone!!!
You need:
Dev Preview 4 ftf from Z3
Dev Preview 3/4 kernel
http://forum.xda-developers.com/z3-compact/development/kernel-android-n-preview-3-t3399540
any ftf designed for z3 compact
twrp recovery img
flashtool for xperia phones
supersu 2.76zip
INSTRUCTIONS:
1. Unlock your Bootloader
2. Flash the ftf dev preview from z3
3. Boot into fastboot mode
4. flash twrp recovery with the command fastboot flash recovery nameofimghere.img
5. flash kernel with command fastboot flash boot nameofimghere.img
6. boot to TWRP and do a factory reset
7. reboot your phone wait for N to boot up
8. setup n to home screen
9. reboot to TWRP and install supersu
10. boot up n download terminal emulator from playstore
10.1 type su
10.2 type wm density 320
12. Start up Flashtool and select the ftf for Z3C then in that exclude partition thing select "SYSTEM CACHE BOOT RECOVERY"
13. After Finishing the flashing progress you will have the right modem and baseband again and your sim will work
14. ENJOY N PREVIEW
Experimental Method :
Just use my backup from TWRP maybe it will work
BACKUP From DP3 :
https://drive.google.com/file/d/0B_Fkc7tsb_m-T05wbkZfV1dBcTg/view?usp=sharing
If you stuck in a bootloop just try to factory reset
WHATS WORKING:
- EVERYTHING
if you like it thank me :laugh:
Why do you set up density 320?
Sent from my D5833 using XDA-Developers mobile app
lamducthien said:
Why do you set up density 320?
Sent from my D5833 using XDA-Developers mobile app
Click to expand...
Click to collapse
If you dont do it everything is in the dpi of the z3 so way too big for our lil phone
J0SH1X said:
If you dont do it everything is in the dpi of the z3 so way too big for our lil phone
Click to expand...
Click to collapse
I understand but I ask u because I see original z3c density is 320 not 319
Sent from my D5833 using XDA-Developers mobile app
lamducthien said:
I understand but I ask u because I see original z3c density is 320 not 319
Sent from my D5833 using XDA-Developers mobile app
Click to expand...
Click to collapse
oh then the website i looked for the dpi had wrong information i will correct it
J0SH1X said:
oh then the website i looked for the dpi had wrong information i will correct it
Click to expand...
Click to collapse
Have u try with N preview 4?
Sent from my D5833 using XDA-Developers mobile app
lamducthien said:
Have u try with N preview 4?
Sent from my D5833 using XDA-Developers mobile app
Click to expand...
Click to collapse
I tried it its not working
J0SH1X said:
I tried it its not working
Click to expand...
Click to collapse
sadly my try to flash dev preview 4 killed my phone not even my twrp backup is working anymore :crying:
cornfirm: Not working with N preview 4
lamducthien said:
cornfirm: Not working with N preview 4
Click to expand...
Click to collapse
dont forget to factory reset your phone if you dont do it it will show xperia then just reboot
J0SH1X said:
dont forget to factory reset your phone if you dont do it it will show xperia then just reboot
Click to expand...
Click to collapse
Yes, after fail with N preview 4. I do following your intruction with N preview but I get reboot with Xperia animation (with factory reset ) 3 time and now my phone is booting up starting. Maybe I will try another time with N preview 4 and wait for many rebooting
I think we should add one step after
14. reboot to twrp and restore the n Backup
to get booting up
14.1 flash N preview kernel and boot to TWRP do a factory reset
lamducthien said:
I think we should add one step after
14. reboot to twrp and restore the n Backup
to get booting up
14.1 flash N preview kernel and boot to TWRP do a factory reset
Click to expand...
Click to collapse
the kernel is included in the backup
J0SH1X said:
the kernel is included in the backup
Click to expand...
Click to collapse
but if I don't make 14.1 and 14.2 step, my device always rebooting when xperia animation , it can't booting up to os
Okay i will add it if i arrive at home
Gesendet von meinem D5803 mit Tapatalk
J0SH1X said:
Im not responsible for any damage on you phone!!!
You need:
Dev Preview 3 ftf from Z3
Dev Preview 3 kernel
http://forum.xda-developers.com/z3-compact/development/kernel-android-n-preview-3-t3399540
any ftf designed for z3 compact
twrp recovery img
flashtool for xperia phones
supersu 2.72.zip
INSTRUCTIONS:
1. Unlock your Bootloader
2. Flash the ftf dev preview from z3
3. Boot into fastboot mode
4. flash twrp recovery with the command fastboot flash recovery nameofimghere.img
5. flash kernel with command fastboot flash boot nameofimghere.img
6. boot to TWRP and do a factory reset
7. reboot your phone wait for N to boot up
8. setup n to home screen
9. reboot to TWRP and install supersu
10. boot up n download terminal emulator from playstore
10.1 type su
10.2 type wm density 320
11. reboot to TWRP and do a backup of the n rom
12. use flashtool to flash the z3c ftf
13. boot the rom up to home screen
14. reboot to twrp and restore the n Backup
15 ENJOY N PREVIEW
WHATS WORKING:
- EVERYTHING
if you like it thank me [emoji23]
Click to expand...
Click to collapse
Here are some screenshots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Gesendet von meinem D5803 mit Tapatalk
bootloop devices
I get bootloop on my device
i have follow the instruction,
i dont know whats wrong with my devices,
my device is D5833
sorry for my bad english
masruradi said:
I get bootloop on my device
i have follow the instruction,
i dont know whats wrong with my devices,
my device is D5833
sorry for my bad english
Click to expand...
Click to collapse
did you do the steps 14.1 reflash n kernel from fastboot and then factory reset once again and i think my phone is D5803 but for the other dude it was working on the screenshot my modell number is the one from big z3 i edited the build.prop after but im just about to do a flashable zip if i can
J0SH1X said:
did you do the steps 14.1 reflash n kernel from fastboot and then factory reset once again and i think my phone is D5803 but for the other dude it was working on the screenshot my modell number is the one from big z3 i edited the build.prop after but im just about to do a flashable zip if i can
Click to expand...
Click to collapse
woah
flashable zip,
can't wait for it
i'm stuck from step six bro,i get bootloop from that step,
i have factory reset,and my device just bootloop,
masruradi said:
woah
flashable zip,
can't wait for it
i'm stuck from step six bro,i get bootloop from that step,
i have factory reset,and my device just bootloop,
Click to expand...
Click to collapse
ive never done a flashable zip before so dont expect it to work its just uploading to google drive
step 6 let me see
try to let it bootlooping for a few minutes and then do factory reset from twrp and after that do art/dalvic wipe then reboot it should boot up then
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
**Intro**
Just a simple HOW TO to centralize everything I found on Russian, Italian, meizufans and xda forums.
M2 Mini has good hardware but very poor software, going to CM is a relief !
**Disclaimer**
I'm not responsible for bricked device.
You may loose warranty.
You need basic knowledge of using adb tools and rooting phones.
**Boot in Recovery and Fastboot**
Boot in recovery : power on holding Volume Up and Power
Boot in fastboot mode : power on holding Volume Down and Power
**Rooting**
King Root works well http://www.kingroot.net
**ADB Drivers**
Google drivers won't recognize M2 Mini, you have to edit the inf file.
You have to activate USB Debugging in the Developer Options for ADB to work.
1) Download drivers at: http://developer.android.com/sdk/win-usb.html
2) Edit android_winusb.inf
3) Go to [Google.NTamd64] section and add this to the end of the section :
;MEIZU M2
%CompositeAdbInterface% = USB_Install, USB\VID_0E8D&PID_201D&MI_01
%CompositeAdbInterface% = USB_Install, USB\VID_2A45&PID_0C02&MI_01
4) Reboot Windows without driver signature enforcement
HOW TO: http://www.howtogeek.com/167723/how...8.1-so-that-you-can-install-unsigned-drivers/
5) Install modified driver
HOW TO : http://developer.android.com/tools/extras/oem-usb.html
**Unlock bootloader**
You have to be on *Flyme OS 4.5.4i* for bootloader unlocking to work.
DOWNLOAD LINK : https://forum.meizufans.eu/topic/3905/flyme-os-4-5-4-stable-m2
1) You need busybox on the phone
DOWNLOAD LINK : https://play.google.com/store/apps/details?id=stericson.busybox&hl=en
2) You have to download the unlock_bootloader.sh
DOWNLOAD LINK: http://www37.zippyshare.com/v/fvm5edpr/file.html
2) Copy file to sdcard via MTP or ADB
adb push unlock_bootloader.sh /sdcard
3) Execute the file as root from ADB
adb shell
su
(accept warning on the phone)
sh /sdcard/unlock_bootloader.sh
4) Unlock
adb reboot bootloader
fastboot oem unlock
(wait for the phone to display confirmation)
"Volume Up" to accept
(wait for unlocking)
5) Reboot your phone into Flyme OS
It is very important to restart your phone and wait for Flyme OS to boot up completely before flashing a custom recovery.
**Custom recovery (TWRP)**
If you didn't boot into Flyme OS at the previous step, you might be stuck in boot loop in recovery and need to go back to the stock recovery (Uploaded on XDA by @murtaza1326)
DOWNLOAD LINK: https://drive.google.com/file/d/0B6kCPdWyvl3xa1RDWVRDRHlfS2c/view
XDA LINK: http://forum.xda-developers.com/showpost.php?p=66476298&postcount=574
1) Download last TWRP 3
DOWNLOAD LINK: https://mega.nz/#!PVcihSST!0yHN3p6dsKqAgW2-2krUSvvzRA-bFQmPR16wUbC7aKs
FOUND ON: http://www.movilesdualsim.com/tema/twrp-3-0-2_modnat-ltt-multilanguage.132746/
2) Flash recovery
fastboot flash recovery_3.0.0.3NAT<T.img
**CyanogenMod 12.1**
Last version seems to be 0.9 from April,16th 2016 on Russian forums.
1) Download Cyanogen
FORUM LINK: http://4pda.ru/forum/index.php?showtopic=715935
DOWNLOAD LINK: https://drive.google.com/file/d/0Bwzrxcf3P6N6S1hzaUYtNGFwMDA/view
2) Download Google Apps
GITHUB LINK: https://github.com/AlexLartsev19/cgapps/releases
DOWNLOAD LINK: https://github.com/AlexLartsev19/cgapps/releases/download/20160423/cgapps-arm-5.1.1-201604241754.zip
3) Boot into recovery
Hold "Volume Up" and Power
4) Copy everything to sdcard via MTP
5) Full wipe
Go to Wipe > Advanced wipe > check Dalvik, System, Cache, Data > Wipe
6) Flash CM and Gapps
Go to Install, select your CM zip file and install.
Do the same with Gapps.
7) Restart your phone
**Enjoy !**
**Screenshots**
Phone is in French,...but all languages available
Reserved @madcorp
any screnshots for cm12.1
Sent from my m2 using XDA Premium 4 mobile app
abhishekbhosale7399 said:
any screnshots for cm12.1
Sent from my m2 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Sure! I'll try to post some later today
thank you ?
Sent from my m2 using XDA Premium 4 mobile app
@abhishekbhosale7399 screenshots added in the main post
Is it better than flyme 4.5.4i ? Are there any bugs? Is battery better? Are you happy with cm?
Nice work!! Permission to port CM12.1? I already have a CM12.1 for MT6735 in the works, but there are a few bugs. Can you do a bug report?
Regards
Nothing for Meizu m2 note ?
is it supports OTG ?
Sent from my m2 using XDA Premium 4 mobile app
It will be really helpful if you could post a video tutorial
update link please i am not able to install by going to about phone
Sent from my M2 Mini using XDA Premium 4 mobile app
i hope @madcorp build for Meizu M2 NOte too, thanks.
Not sure how close this is but looks genuine to debrick meizu phones. This is displaying it on the meizu m2 note but surely should work on the mini.
https://youtu.be/twgynLFAczc
Phone cannot see SIM
Yep, ive been using CM for few months, everything was good. But today i had to wipe /data, and couldn't. Recovery says, that it cannot mount /data. I thinks, that's because of encryption. I played around, tried wipe system from Settings, but it didn't work too. I and did
wipe data
in the phone's terminal. Saw lots of errors from apps, of course. Then rebooted and, oh my, phone was asking me for password to unencrypt the storage. Huh.
I enetered password, loaded into system, and, everything is pretty cool (ive got clean firmware, system apps only), except two things:
Phone is still encrypted, hence, i cant change firmware or do anything else
Second, and most terrible, is that phone can't see SIM card. No SIM at all. I changed SIM's position, but it does not work, yeah. Actually, SD card is working, i can see it from file manager, read/write files. Wi-Fi is working too.
I have backups for all partitions, except Internal Storage and /data. /data was backuped using Titanium Backup, files from Internal Storge moved to SD card. So, i do not care about files, i just want my phone up and running. Any help?
Do we have to unlock bootloader for flashing custom recovery
How downgrade from flyme 5.1 to 4 for bootloader unlock?
meizu m2
guys my mobile meizu m2 stack in bootloop
i am try to recovery but recovery lose
and mobile also not unlock bootloader
any one help me
to install recovery and stock rom
---------- Post added at 07:04 AM ---------- Previous post was at 07:01 AM ----------
murtaza1326 said:
Reserved @madcorp
Click to expand...
Click to collapse
guys my mobile meizu m2 stack in bootloop
i am try to recovery but recovery lose
and mobile also not unlock bootloader
any one help me to unlock bootloader and
install recovery and stock rom
Good Work!
Thank you very much. I needed something like this because I had a lot of problems with Flyme 5.x.x. Now with Root, Flyme 4.x.x,...everything is much better.
Thanks a lot!:good:
jcarlos.trillo said:
Good Work!
Thank you very much. I needed something like this because I had a lot of problems with Flyme 5.x.x. Now with Root, Flyme 4.x.x,...everything is much better.
Thanks a lot!:good:
Click to expand...
Click to collapse
Houw did you downgrade???
Hydrogen OS 2.0 for Oneplus x Listed on
http://www.h2os.com/download
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://download.h2os.com/oneplus_x/...01_all_201608241640_wipe_86b633e3fbec4d56.zip
Size : 703mb
Downloading...
Flash the ROM zip with OOS recovery
TWRP wont work to flash this rom and wont boot after successful flash
Guide to Install Gapps and Root
Step 1: Install Hydrogen OS with OPX Stock recovery
Step 2: Dont Reboot the device, Reboot to Fastboot
>> Check if your bootloader is Unlocked
>> Grab Bootloader file (emmc_appsboot.mbn) from Hydrogen OS 5.1.1 stock rom
>> Place it in Adb& fastboot folder and flash it via fastboot
fastboot flash aboot emmc_appsboot.mbn
>> Now Type
fastboot reboot-bootloader
>> Now temporarily boot TWRP official recovery for OPX with fastboot
fastboot boot twrp-3.0.2-0-onyx.img
You should be able to boot to TWRP recovery now
If not use fastboot reboot-bootloader again and this time try to flash TWRP
fastboot flash recovery twrp-3.0.2-0-onyx.img and boot to recovery
Step 3: Now See if your mobile is connected to PC as MTP device like if u can access storage files both on pc and mobile to flash Gapps
Step 4: If storage files are acessible by TWRP, just flash Open Gapps Pico version. If you were unable to flash for some reason try adb sideload
>> Remember you shouldnt reboot your mobile now
>> Reboot to bootloader/fastboot again
>> Now copy the emmc_appsboot.mbn (bootloader file) from Hydrogen os android 6.0 version to fastboot folder (make sure you are deleting or replacing the previous bootloader file from Hydrogen os 5.1.1 version) and flash it
fastboot flash aboot emmc_appsboot.mbn
>> Your mobile should boot normally now with working Gapps
Guide to Flash SuperSu
>> Download Kingroot apk and install it. Try it for once or twice you will be able to gain access to root
>> Try Kingroot to supersu method
ScreenShots
This post has already made me happier, lets try it out.
Nice! flashable through twrp?
migueldbr said:
Nice! flashable through twrp?
Click to expand...
Click to collapse
Yep
Harish_Kumar said:
Yep
Click to expand...
Click to collapse
opengapps or banks gapps for android 6.0 working by flashing with twrp also? Sorry for the questions, but they will be also useful to other users=p
migueldbr said:
opengapps or banks gapps for android 6.0 working by flashing with twrp also? Sorry for the questions, but they will be also useful to other users=p
Click to expand...
Click to collapse
I am still downloading this so cant say
for previous h2os open pico worked fine, if u can wait for 10 more min i can give you more about this 6.0 version
Harish_Kumar said:
I am still downloading this so cant say
for previous h2os open pico worked fine, if u can wait for 10 more min i can give you more about this 6.0 version
Click to expand...
Click to collapse
Sure, i will wait. thanks
Careful with flashing through twrp though, if its anything like the oxygen 3 community build, there is a new bootloader included that will break twrp and you will be stuck without access to recovery (and the only way to fix that is to root with kingroot(dont know if it works on h2os though) and then flash recovery with flashify, or flash with fastboot command)
migueldbr said:
Sure, i will wait. thanks
Careful with flashing through twrp though, if its anything like the oxygen 3 community build, there is a new bootloader included that will break twrp and you will be stuck without access to recovery (and the only way to fix that is to root with kingroot(dont know if it works on h2os though) and then flash recovery with flashify, or flash with fastboot command)
Click to expand...
Click to collapse
Yep
I am safe until i have unlocked bootloader
I will revert back to prev 5.1.1 bootloader and flash Oxygen OS 2.0
Harish_Kumar said:
Yep
I am safe until i have unlocked bootloader
I will revert back to prev 5.1.1 bootloader and flash Oxygen OS 2.0
Click to expand...
Click to collapse
Please leave feedback here when you try then. If twrp still works, etc=p.
Thanks in advance!
Harish_Kumar said:
Hydrogen OS 2.0 for Oneplus x Listed on
http://www.h2os.com/download
http://download.h2os.com/oneplus_x/...01_all_201608241640_wipe_86b633e3fbec4d56.zip
Size : 703mb
Downloading...
Click to expand...
Click to collapse
Hi if you flashed it..
Then please provide some screenshots.
farooque7508 said:
Hi if you flashed it..
Then please provide some screenshots.
Click to expand...
Click to collapse
Will be adding screenshots in few minutes in the second post
@migueldbr
TWRP didnt work for flashing this rom
Had to flash with OOS recovery and after that TWRP didnt boot
Its same like OOS 3.1.0 community build
Harish_Kumar said:
Its same like OOS 3.1.0 community build
Click to expand...
Click to collapse
It' s to be expected.
Harish_Kumar said:
@migueldbr
TWRP didnt work for flashing this rom
Had to flash with OOS recovery and after that TWRP didnt boot
Its same like OOS 3.1.0 community build
Click to expand...
Click to collapse
thanks.
Btw does it have vibration feedback when you double tap screen to wake? It was missing from the previous h2os
Pls share change log in english. On the h20s.com only on chinese...
migueldbr said:
thanks.
Btw does it have vibration feedback when you double tap screen to wake? It was missing from the previous h2os
Click to expand...
Click to collapse
nope it doesn't vibrate
If you flash this in OOS recovery like OOS 3, how would you install gapps afterwards?
Omicron Technics
sniper20 said:
If you flash this in OOS recovery like OOS 3, how would you install gapps afterwards?
Omicron Technics
Click to expand...
Click to collapse
Via Google Installer
What about battery life and
Xposed working or not?
Sent from my ONE E1003 using XDA-Developers mobile app
Install CM14 for OnePlus X (The Unofficial)
** How to Install TWRP for the 3.1.0 version you installed Oxygen.
B1: Starting Fastboot mode by turning off the power on. Then hold down + to the source.
Step 2: Install the driver and connect to the computer (HD drivers installed on the network to find it)
B3: Run cmd (run -> cmd) command fastboot boot attachments and enter this download Mod edit link removed
B4: boot into TWRP Self.
** The Stock 2.2.2 ROM you are using the network attempt to open up the OEM and then down Flashfy unbootloader install TWRP on CM ROMs directly or similar 13 and then into TWRP always offline.
** Note: Back up your data before doing us avoid errors arising restore offline.
** Download ROM CM 14: Mod edit link removed
** Link Download Grapps:Mod edit link removed
** Conducted into TWRP and wipe data, cache partitioning, Dalvik Cache. Flash ROM + Grapps and restart.
This is an experiment with me what errors arise not responsible. For those you love to dabble and discourage those you do not know and do not understand anything. People are already getting a bit bored Android does not dabble to dabble like new. : D
Path: Mod edit link removed
Vietnamses : Mod edit link removed
downloading, will report back soon.
Cam on
Thanks much
Post some screenshots.
failed to flash twrp ox 3.1 (https://www.fshare.vn/file/8AH9KRVS4URW). I tried flash it using twrp 3.0.2.0, but failed too
Well, this is interesting.. The step-by-step guide is a bit confusing though. I will download and try the 'ol good method of flashing ROM, gapps and supersu. Hope it works!
namquang93 said:
failed to flash twrp ox 3.1 (https://www.fshare.vn/file/8AH9KRVS4URW). I tried flash it using twrp 3.0.2.0, but failed too
Click to expand...
Click to collapse
can u mirror it? litle bit confusing
Sent from my ONE E1003 using XDA-Developers mobile app
be_are said:
can u mirror it? litle bit confusing
Sent from my ONE E1003 using XDA-Developers mobile app
Click to expand...
Click to collapse
here you go: https://drive.google.com/file/d/0B_Km0FbYnea1aDdIaTEydElhUkk/view?usp=sharing
twrp has not made it to 3 ox you have to use a downgrade to get a fresh start using unbrick method, (keep flashable backup via flashify) get twrp installed with the new (old) boot loader, flash cm14+ext. and you are done.
if you had cm13 or the likes, please confirm if you CAN upgrade to 14 before ox people start trying to install without knowing if it even has android 6 (last update i saw on the branch was from june 7 so idk)
teamwin does not have twrp for the ox 3 on oneplus x yet (on their releases anyway) so you have to follow some other process to downgrade to a twrp'able os (and a backup) before trying yo install this
if i see any info from people who have been able to update (and if it has android 7) i'll try to make a video on the process (in white, Texan english)
Please remove this page.
namquang93 said:
failed to flash twrp ox 3.1 (https://www.fshare.vn/file/8AH9KRVS4URW). I tried flash it using twrp 3.0.2.0, but failed too
Click to expand...
Click to collapse
Did you try boot into it:
> fastboot boot twrp_for_ox_3.1.0.img
Seems like the guide says you have to boot into it, not flash it.
ksigit said:
Did you try boot into it:
> fastboot boot twrp_for_ox_3.1.0.img
Seems like the guide says you have to boot into it, not flash it.
Click to expand...
Click to collapse
You're right. I tried fastboot boot twrp_for_ox_3.1.0.img instead of fastboot flash recovery twrp_for_ox_3.1.0.img and it booted into twrp_for_ox_3.1.0. But it still return an error when flash CM14, the same of twrp 3.0.2.0.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
namquang93 said:
You're right. I tried fastboot boot twrp_for_ox_3.1.0.img instead of fastboot flash recovery twrp_for_ox_3.1.0.img and it booted into twrp_for_ox_3.1.0. But it still return an error when flash CM14, the same of twrp 3.0.2.0.
Click to expand...
Click to collapse
Looks like a successful install to me. Could you provide twrp logs?
With whose permission did you post this build here ? Don't you think there was a reason that even after a complete build of CM14 it was still not posted to the forums ?
I am asking you, as politely as possible, to remove the links and this fake procedure, when N is ready, it will be shared, you might find phony builds or legit but non working ones on the interweebz, that doesn't mean it gives you the right to share it just because you think its cool, because its not.
Take it down.
EDIT: Sure, if you build yourself and want to share it then you're more than welcome.
And then they will cry if things are broken !! Take it down folk !
Sent from my ONE E1003 using XDA-Developers mobile app
This Build was just a test build, what made u think that i will not post it here on xda if the rom booted? We, the team are working to make it work but yeah dont post the builds from afh here, will update u all for sure when its done. I think it was my mistake to not to make that build private. -_-
It flashes successfully but doesn't boot, goes back into recovery. Still, great work.
congrats for succesfull starter build
hats off !!!!! to you guys ([/B]developers off this rom) :good:
Flashed with/without gapps. Doesn't boot - goes back 2 recovery
foster095 said:
Flashed with/without gapps. Doesn't boot - goes back 2 recovery
Click to expand...
Click to collapse
Kindly refer to the developer's post, POST #16
So many LEECHERS exist, It's not hard to press a button..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi xda users,
I am very pleased to present LATEST NOUGAT FTFs Google Drive Mirror, Patched Kernels and TWRP .
I spend lots of time and bandwidth for you, so please hit Thanks :fingers-crossed: button and comment below..
Bootloader LOCKED Devices
-Just follow 1 to 14 steps
Bootloader UN-LOCKED Devices
-Just follow 1 to 30 steps
Google Drive Mirror File List
-7.1.1 (32.4.A.1.54) FTFs (E6603, E6633, E6653, E6683)
-Patched Kernels
-TWRP 3.1.1.0 thanks to @kv123
-ROOT Methods (SuperSU, phh and Magisk)
-Flashtool, Flashtool-drivers (0.9.23.2)
Click this for List view
Patched Kernel Specifications
sony-ric
dm-verity
drm-fix
busybox-1.26.2
fully /system read&write access
If r/w didn't work for you, please do that. It will be fixed.
1.Install Termux on Play Store.
2.Write "su" command and give root access.
3.Then write this
Code:
echo 0 > /sys/kernel/security/sony_ric/enable
4.Lastly write this
Code:
busybox mount -o rw,remount,rw /system
Done
Step by Step Installation
Summary
Install Flashtool & Drivers
Flash FTF
Flash Patched Kernel & TWRP
Flash ROOT
Detailed
1-) Install flashtool-0.9.23.1-windows.exe
2-) Copy x10flasher.jar file into "C:\Flashtool", open Flashtool wait until process done then quit program.
3-) Disable "Driver Signature Verification"
Windows 7 : Tap F8 while booting and select required option
Windows 8, 8.1, 10 : Read This Instructions
4-) Install Flashtool-drivers.exe (flashmode, fastboot, z5)
5-) Copy FTF file into "C:\Users\YOUR PC NAME\.flashTool\firmwares"
6-) Backup your Photos & Videos & Musics etc. on Internal Memory to SDCard or PC
7-) Shutdown your phone
Open Flashtool (x32 suggested)
9-) Click Flash button (top left) then Ok button, select FTF on left side
10-) Select ALL wipe options, no NEED Misc TA for every flash (SKIP this, if you want to just UPDATE and keep data)
11-) Click Flash button, wait 1 minute (you will see an info)
12-) Push VOLUME DOWN button, then connect phone to pc (green led)
13-) When flashing done, disconnect and boot-up your phone, complete setup wizard (required)
14-) If you want to use Patched Kernel or ROOT your phone then continue otherwise flashing FTF process done
You have to BL Unlocked device to continue..
15-) Shutdown your phone
16-) Push VOLUME UP button, then connect phone to pc (blue led)
17-) Copy 32.4.A.1.54_E66XX.img and twrp_recovery.img file into "C:\Flashtool\x10flasher_lib"
1 Open "C:\Flashtool\x10flasher_lib" folder
19-) Then press LEFT SHIFT and click mouse right button into this folder
20-) Then press Open command window here option
21-) Then type this code into cmd (xx your model)
Code:
fastboot.exe flash [COLOR="red"]boot[/COLOR] 32.4.A.1.54_E66[COLOR="red"]xx[/COLOR].img
fastboot.exe flash [COLOR="red"]recovery[/COLOR] twrp_recovery.img
22-) Disconnect your phone and boot-up (required)
23-) If you want to ROOT your phone then continue otherwise flashing Patched Kernel process done
24-) Put ROOT files into Internal Memory
SuperSU - Most common root solution
phh's Superuser - I think best root solution
Magisk - Module solution & It has built-in phh root solution
25-) Boot-up your phone into TWRP
-TWRP : Volume DOWN + Power
26-) If you want to use SuperSU, just flash zip and reboot
27-) If you want to use phh, just flash zip and reboot You have to install "me.phh.superuser.apk"
Latest Magisk
Latest Magisk Uninstaller
2 If you want to use SuperSU & Magisk, flash SuperSU first then Magisk then Install Magisk Manager
29-) If you want to use Magisk, flash latest Magisk then Install Magisk Manager
30-) Have fun :fingers-crossed:
You can delete ALL System Apps with System App Remover ROOT APP
HELP ME!
HI :3
a request, could use the same kernel of the Latin American version of the model 6603? since I use that version, and this device and has the fingerprint sensor, please, I currently use the kernel of the US version and I do not have the fingerprint sensor enabled, or is there any way to reactivate this sensor with the American kernel?
SKGT said:
HI :3
a request, could use the same kernel of the Latin American version of the model 6603? since I use that version, and this device and has the fingerprint sensor, please, I currently use the kernel of the US version and I do not have the fingerprint sensor enabled, or is there any way to reactivate this sensor with the American kernel?
Click to expand...
Click to collapse
No, usa kernel was broken. I use TR and Germany kernels.
Thank You so much!
4th comment!
Sent from my E6653 using XDA-Developers Legacy app
Can I flash this ROM using TWRP?
Sent from my E6653 using XDA-Developers Legacy app
GeramanX said:
Can I flash this ROM using TWRP?
Sent from my E6653 using XDA-Developers Legacy app
Click to expand...
Click to collapse
No. Follow the instructions of the OP.
Sent from my E6653 using Tapatalk
@sceryavuz is it possible to add kcal support on .54 kernel.
s.hossein said:
@sceryavuz is it possible to add kcal support on .54 kernel.
Click to expand...
Click to collapse
+1
s.hossein said:
@sceryavuz is it possible to add kcal support on .54 kernel.
Click to expand...
Click to collapse
devilmaycry2020 said:
+1
Click to expand...
Click to collapse
Flash 7.1.x_kcal_support.zip via TWRP. :fingers-crossed:
I have flashed it. It works so nice. Battery last longer. Phone doesn't heat up, only warm up a bit. But why does the phone heat up while charging only? Is there any way to fix this?
Thank You
s.hossein said:
@sceryavuz is it possible to add kcal support on .54 kernel.
Click to expand...
Click to collapse
sceryavuz said:
Flash 7.1.x_kcal_support.zip via TWRP. :fingers-crossed:
Click to expand...
Click to collapse
Thank you. Working well on .54 kernel
sceryavuz said:
No, usa kernel was broken. I use TR and Germany kernels.
Click to expand...
Click to collapse
Sorry for my english, google translator
So, I have to flash the ftf of germany? Does this kernel have the fingerprint sensor? I want to recover the fingerprint sensor, but I do not want to lose the drm keys I also do not want to lose root, any help? I use an e6603, with the ftf of latin america, but with the kernel of usa, is there any way to enable the fingerprint sensor?
thanks: 3
thank you sir for your work..but twrp still looping after flashing it>>>what shall i do(the phone stocked on twrp )
i did wipe cache and again mounted the system and flashed supersu>>>>>>but unfortunately.....didnot worked ...any suggestions???
thanks in advance
amer78 said:
thank you sir for your work..but twrp still looping after flashing it>>>what shall i do(the phone stocked on twrp )
i did wipe cache and again mounted the system and flashed supersu>>>>>>but unfortunately.....didnot worked ...any suggestions???
thanks in advance
Click to expand...
Click to collapse
Where did you flash it? And what model do you use?
Sent from my E6653 using Tapatalk
saiz136 said:
Where did you flash it? And what model do you use?
Sent from my E6653 using Tapatalk
Click to expand...
Click to collapse
i flashed rooted kernel via flash tool (fastboot)
then flashed twrp (same method)
then flashed supersu as always
my model is E6633 (dual sim z5)
amer78 said:
i flashed rooted kernel via flash tool (fastboot)
then flashed twrp (same method)
then flashed supersu as always
my model is E6633 (dual sim z5)
Click to expand...
Click to collapse
Are you sure you flashed the right firmware? With ".TA" removed? Try to flash the firmware and make sure it's the right model and build number using flashtool. Also check the img file if it's the right model too.
Sent from my E6653 using Tapatalk
saiz136 said:
Are you sure you flashed the right firmware? With ".TA" removed? Try to flash the firmware and make sure it's the right model and build number using flashtool. Also check the img file if it's the right model too.
Sent from my E6653 using Tapatalk
Click to expand...
Click to collapse
i did it all as mentioned but .....no hope...still stocked at twrp..and hone refuse to boot normaly..
i did wipe cahe ..fixing permissions...everything...n chance
amer78 said:
i did it all as mentioned but .....no hope...still stocked at twrp..and hone refuse to boot normaly..
i did wipe cahe ..fixing permissions...everything...n chance
Click to expand...
Click to collapse
Try to flash ftf (firmware without the boot.img and twrp.img) also I might recommend to download the ftf via Xperifirm and not the one provided by the OP. Use the customised version.
Sent from my E6653 using Tapatalk
saiz136 said:
Try to flash ftf (firmware without the boot.img and twrp.img) also I might recommend to download the ftf via Xperifirm and not the one provided by the OP. Use the customised version.
Sent from my E6653 using Tapatalk
Click to expand...
Click to collapse
i think the problem comes from twrp.....
its not compatible with my device
is there any other method to root?
Hi!!
This is my first contact with Android. I have compiled the TWRP for SM-N980F is fully working. I hope we find a custom rom to be able to install it.... I'm going to try to develop one. Let's see how it goes.
TWRP NOTE20
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Shiresp said:
Hi!!
This is my first contact with Android. I have compiled the TWRP for SM-N980F is fully working. I hope we find a custom rom to be able to install it.... I'm going to try to develop one. Let's see how it goes.
TWRP NOTE20
View attachment 5588669
Click to expand...
Click to collapse
Thanks for your effort. Please let us know, 10 days later, are there any bugs or it works as planned? Are there any special steps we shoul do to install it?
sheebee said:
Thanks for your effort. Please let us know, 10 days later, are there any bugs or it works as planned? Are there any special steps we shoul do to install it?
Click to expand...
Click to collapse
Hi Sheebee,
I haven't found any bug usung the recovery.
And about the install steps, they are the usual to install twrp.
1. Unlock bootloader.
2. Flash with Odin in AP side the twrp file.
3. Reboot in recovery Mode.
---‐-------------------
4. If you want install magisk or rom. Install it
5. Reboot settings power off.
6. Automatically turn on in recovery Mode.
7. Wipe data.
8. Reboot settings and system.
And thats all.
Sorry for no show the steps.
Byeeee
Thanks Shiresp, may the force be with you! Let us know if you find appropriate ROM.
Shiresp said:
Hi!!
This is my first contact with Android. I have compiled the TWRP for SM-N980F is fully working. I hope we find a custom rom to be able to install it.... I'm going to try to develop one. Let's see how it goes.
TWRP NOTE20
View attachment 5588669
Click to expand...
Click to collapse
Where u got sources from ?
installed smoothly until i tried to boot to system and found that my device no longer boots to system lol now having a hard time finding the stock firmware for the usa model
i think you should try installing GSI ' s to your device
deathbypvp said:
installed smoothly until i tried to boot to system and found that my device no longer boots to system lol now having a hard time finding the stock firmware for the usa model
Click to expand...
Click to collapse
It's just for n980F model. Im using a european model and works properly
Ivan2005 said:
Where u got sources from ?
Click to expand...
Click to collapse
Twrp??? From github.. c1s model....
Shiresp said:
It's just for n980F model. Im using a european model and works properly
Click to expand...
Click to collapse
idk what region model my device was but its a n980f and it just boots to the custom recovery
I have a eu version sm-n980f/ds, android 12. Twrp is installed but you can not boot the system. it remains in twrp recovery
deathbypvp said:
idk what region model my device was but its a n980f and it just boots to the custom recovery
Click to expand...
Click to collapse
When twrp boots, after that you try reboot -> system???
edsoedso said:
I have a eu version sm-n980f/ds, android 12. Twrp is installed but you can not boot the system. it remains in twrp recovery
Click to expand...
Click to collapse
I'll do it with 4 n980F and work. After twrp boot, reboot -> system
Shiresp said:
I'll do it with 4 n980F and work. After twrp boot, reboot -> system
Click to expand...
Click to collapse
I have already rooted phone but have not installed recovery. I tried to install it through magisk but unsuccessfully. Could you please be more specific in steps you follow to install it through odin? Thank you
edsoedso said:
I have already rooted phone but have not installed recovery. I tried to install it through magisk but unsuccessfully. Could you please be more specific in steps you follow to install it through odin? Thank you
Click to expand...
Click to collapse
1. In Odin uncheck auto reboot.
2. In AP side select twrp file.
3. Flash the file.
4. Press In the device volume down and power, when phone rebooting and before logo press volume up and power. When warning about custom firmware installed, release power button.
5. Into twrp flash samsung disabler 3.0 and flash magisk.
6. Option reboot -> power off.
7. Device rebooting again in twrp automatically.
8. Factory data, no factory reset.
9. Option reboot -> system
10. Device will reboot normally. But this first power on system is normal that it takes a few minutes to start the phone completely.
That's the steps I follow with all twrp I have installed.
BYE!!!
Shiresp said:
1. In Odin uncheck auto reboot.
2. In AP side select twrp file.
3. Flash the file.
4. Press In the device volume down and power, when phone rebooting and before logo press volume up and power. When warning about custom firmware installed, release power button.
5. Into twrp flash samsung disabler 3.0 and flash magisk.
6. Option reboot -> power off.
7. Device rebooting again in twrp automatically.
8. Factory data, no factory reset.
9. Option reboot -> system
10. Device will reboot normally. But this first power on system is normal that it takes a few minutes to start the phone completely.
That's the steps I follow with all twrp I have installed.
BYE!!!
Click to expand...
Click to collapse
Thank you for your prompt reply. What should I do under number 8, wipe data? Thank you!
edsoedso said:
Thank you for your prompt reply. What should I do under number 8, wipe data? Thank you!
Click to expand...
Click to collapse
Jajajaj, that's right wipe data... sorry I was typing from memory.
Shiresp said:
Jajajaj, that's right wipe data... sorry I was typing from memory.
Click to expand...
Click to collapse
Thanks a lot! Really appreciate.
Shiresp said:
Twrp??? From github.. c1s model....
Click to expand...
Click to collapse
The tree was still WIP for official release, that's the reason for which it wasn't on XDA yet. I also see you didn't post any links to sources, neither credits whatsoever.
I opened a thread for Official TWRP here, with more instructions, FAQ and everything needed.
Regards
corsicanu said:
The tree was still WIP for official release, that's the reason for which it wasn't on XDA yet. I also see you didn't post any links to sources, neither credits whatsoever.
I opened a thread for Official TWRP here, with more instructions, FAQ and everything needed.
Regards
Click to expand...
Click to collapse
sorry,
I assumed that the sources we all knew are from github. Without the work of those people developing in the repositories, the compilation of the recovery would be impossible.
I have only compiled the recovery because I needed it personally for 4 n980f.