Related
Hi, sorry for being noob.
I updated my Yureka to Lollipop via OTA. Everything went smoothly and the phone was running great.
Then I decided to root my mobile and followed the instructions. Downloaded all adb tools and drivers for PC.
By holding shift key opened command window where the extracted adb files were.
Executed command 'fastboot -i 0x1ebf oem unlock'
Then Executed command 'fastboot -i 0x1ebf flash recovery recovery-yu.img'
And then blank..........nothing~!. Tried rebooting, taking out battery, putting it on and rebooting into recovery by holding vol+, vol- and power buttons. Just shows the YU logo and then phone turns blank. Would really appreciate your help guys. Worried :crying:
Solved : See My Last Post.
Same problem. Please help guys.
Did u turned on USB debugging before doing this...?
Flashed from my Yureka
TheIndianSinger said:
Hi, sorry for being noob.
I updated my Yureka to Lollipop via OTA. Everything went smoothly and the phone was running great.
Then I decided to root my mobile and followed the instructions. Downloaded all adb tools and drivers for PC.
By holding shift key opened command window where the extracted adb files were.
Executed command 'fastboot -i 0x1ebf oem unlock'
Then Executed command 'fastboot -i 0x1ebf flash recovery recovery-yu.img'
And then blank..........nothing~!. Tried rebooting, taking out battery, putting it on and rebooting into recovery by holding vol+, vol- and power buttons. Just shows the YU logo and then phone turns blank. Would really appreciate your help guys. Worried :crying:
Click to expand...
Click to collapse
same day same problem please help me if u find a solution....:crying:
Da_Gamer_pk said:
Did u turned on USB debugging before doing this...?
Flashed from my Yureka
Click to expand...
Click to collapse
Yes I had Done everything as mentioned......
Help please
same problem here.
unable to open recovery or bootloader
just YU Initial icon coming and looping.
i used fastboot -i 0x1ebf flash recovery yu-twrp-recoveryx64.img
PROBLEM SOLVED GUYS~!
I downloaded two files
1). cm-12.0-YNG1TAS0W0-tomato-signed-fastboot.zip
2). factory-image-flash-tools-windows-flashtools.zip
I extracted all the contents in one folder of PC. Connected phone in fastboot mode to PC. Then from the folder of PC, executed the flash-all.bat command by double clicking on it. Thats it, after that in a few minutes, My Yureka is alive again.
Here is the thread, please follow all instructions and hit thanks. :good: :laugh:
http://forum.xda-developers.com/yureka/general/yureka-cm12-lollipop-fastboot-zip-t3085621 by RohitJaiswal
TheIndianSinger said:
PROBLEM SOLVED GUYS~!
I downloaded two files
1). cm-12.0-YNG1TAS0W0-tomato-signed-fastboot.zip
2). factory-image-flash-tools-windows-flashtools.zip
I extracted all the contents in one folder of PC. Connected phone in fastboot mode to PC. Then from the folder of PC, executed the flash-all.bat command by double clicking on it. Thats it, after that in a few minutes, My Yureka is alive again.
Here is the thread, please follow all instructions and hit thanks. :good: :laugh:
http://forum.xda-developers.com/yureka/general/yureka-cm12-lollipop-fastboot-zip-t3085621 by RohitJaiswal
Click to expand...
Click to collapse
I have revived my Soft bricked Yureka Using this method. Many thanks.
Also want to conform here that I had PACMAN 5.1 beta while I bricked the phone. I tried this method on my friend's phone with Blisspop ROM too.
Peace. V
hi any 1 help me my android in yu logo showing "image signature verify fail" pls help any idea
fastboot driver
Everything is same except booting after giving the command my device was stuck on fastboot screen but after removing usb cable it boot up and running just like before but hadnt installed twrp.
Device = Yureka Plus
Os = COS12.1
same problem but my phone is not going to fastboot mode and when i pull battarty and re insert it ,, only red light will blow whatcan i do ..my phone is not starting
device- yureka aq5510
os- izer
recovery- twrp
same problem
some one plz help same problem
Is there any way to flash stock rom using fastboot in my Lenovo A3000 H? Actually , my device is not detected when I connect to pc but when I connect it in fastboot mode it is detected. So, if there is any way please tell me. Thank you.:crying:
I have flashed TWRP on my oneplus 2 through fastboot by typing "fastboot flash recovery ./Desktop/OP2/recovery.img" (remove quotations). However, when I go into recovery mode, the stock recovery shows up. I have unlocked bootloader too btw. Can anyone help me solve this (put it in simple terms please)
Try to boot in recovery first time phone restart
Sent from my ONE A2005 using Tapatalk
It's fixed now. Had to enter recovery mode through fastboot using the buttons
Iam a new one to these rooting and all and I rooted and installed cyanogen mod . That is fine . I forgot to flash gapps while flashing that custom rom. Now Iam not able to go to the recovery menu .It is not even showing twrp . Even in my pc it is not showing any fastboot devices when I type fastboot devices. Previously everything is fine before this cyanogen mod . When this cyanogen mod came I have not went to the recovery atleast once . Some seniors please help me..........
bvsbrk said:
Iam a new one to these rooting and all and I rooted and installed cyanogen mod . That is fine . I forgot to flash gapps while flashing that custom rom. Now Iam not able to go to the recovery menu .It is not even showing twrp . Even in my pc it is not showing any fastboot devices when I type fastboot devices. Previously everything is fine before this cyanogen mod . When this cyanogen mod came I have not went to the recovery atleast once . Some seniors please help me..........
Click to expand...
Click to collapse
Please let me know your current ROM and previous ROM.
Power+Vol down.
Get into bootloader mode by selection keys.
Then type fastboot boot recovery.img
Before this let me know your exact ROM version.
Hope this helps.
Iam using Resurrection Remix -M-v5.7.1-20150719-A6000 and my previous rom is the inbuilt one that comes with purchasing lenovo a6000 plus
bvsbrk said:
Iam using Resurrection Remix -M-v5.7.1-20150719-A6000 and my previous rom is the inbuilt one that comes with purchasing lenovo a6000 plus
Click to expand...
Click to collapse
1. Install Minimal ADB and Fastboot from following thread link
2. Download the recovery [SDK 22/23 (5.1.X/6.X)] TWRP 3.0.2.0 from following link Recovery for Lenovo A6000
3. Replace recovery.img of SDK 22/23 to minimal ADB and Fastboot installation folder
4. Now do the following steps & thanks to @Mr.AW
a. Enter to fastboot
b. Turn off your phone
c. Hold on the volume down key and hold on the power button
d. Wait until lenovo logo appears with small text "Powerkey long press can reboot phone" at the bottom of the screen
e. Connect your phone to your PC
f. Type "fastboot boot recovery.img" (without quotes). Wait until you land on TWRP recovery
I hope, now you can land into recovery mode.
bro I did each and every step above way before. Each time Iam ending up with the resurrection remix logo and nothing comes after that. Even from pc it is saying waiting for any device when I type fastboot boot recovery.img. Any way thanks for your reply
bvsbrk said:
bro I did each and every step above way before. Each time Iam ending up with the resurrection remix logo and nothing comes after that. Even from pc it is saying waiting for any device when I type fastboot boot recovery.img. Any way thanks for your reply
Click to expand...
Click to collapse
Which recovery image you flashed?
You should flash only MM's[sdk22/23.]
My phone lenovo A6000 didnt detect as qualcomm
bro it is showing wating for any device though I installed all the drivers
IbS285 said:
Which recovery image you flashed?
You should flash only MM's[sdk22/23.]
Click to expand...
Click to collapse
Try this it will work
http://forum.xda-developers.com/len...lenovo-a6000-plus-stuck-booting-logo-t3437378
bvsbrk said:
Click to expand...
Click to collapse
Make sure if fastboot driver installed properly by "fastboot devices" command.
Bro when I was in base rom (lollipop) it worked but when I flashed cm then onwards it is showing waiting for device. I dont know how to install fastboot drivers .plz help me
bvsbrk said:
Bro when I was in base rom (lollipop) it worked but when I flashed cm then onwards it is showing waiting for device. I dont know how to install fastboot drivers .plz help me
Click to expand...
Click to collapse
Check out here:-http://forum.xda-developers.com/showthread.php?t=2277112
thanks bro
I am also having same problem...my current ROM is ressurection remix 7.1.2 and while I was flashing ROM and gapps....flashing of gapp failed now recovery mode is not opening
I Can't boot into recovery mode
in my lenovo a6000 mobile fastboot mode is not working
I have boot into recovery mode via PC But is nir working
plsssssssssssssss help me
Hello,
I need help about my yureka plus on android (YU5510A),
I bought yureka plus yesterday and it comes on stock android 4.4.4 (Kitkat), I try to install custom rom and connect my phone to my laptop with help of YUWARE and try to unlock the bootloader in fastboot mode, it shows the successful message, but phone cant restart, I restart it manually, but it stuck on Yureka logo, trying again for flashing TWRP, same thing happen.
My phone (YU5510A) stuck on yureka plus logo.
So please help me.
Best Regards
Sadique A
sadique2804 said:
Hello,
I need help about my yureka plus on android (YU5510A),
I bought yureka plus yesterday and it comes on stock android 4.4.4 (Kitkat), I try to install custom rom and connect my phone to my laptop with help of YUWARE and try to unlock the bootloader in fastboot mode, it shows the successful message, but phone cant restart, I restart it manually, but it stuck on Yureka logo, trying again for flashing TWRP, same thing happen.
My phone (YU5510A) stuck on yureka plus logo.
So please help me.
Best Regards
Sadique A
Click to expand...
Click to collapse
your device is soft bricked from where i see,
download the drives first for your device link :- https://androidmtk.com/download-yu-usb-driver
download adb platform tools:- https://dl.google.com/android/reposi...st-windows.zip
download recovery:- https://dl.twrp.me/tomato/
download the fast-boot firmware:- http://builds.cyngn.com/factory/tomato/cm-12.1-YOG4PAS8A4-tomato-signed-fastboot-a7a306cebd.zip
download factory image maker :- https://drive.google.com/open?id=0BxGRG9YXw62rUWNLMjdNaGt1a2s
method 1
extract the fast boot firmware and factory image maker in same folder. then follow these steps.
put your phone in fast-boot mode and type fastboot -i 0x1ebf oem unlock (will unlock your bootloader)
and now find flash_all.bat file in the folder where you extracted all files and run as admin. let the process finish you would be back at stock firmware with no boot loops.
if you don't want to go to factory image then
method 2
boot your phone in fastboot and type
fastboot -i 0x1ebf oem lock (to lock your bootloader)
fastboot -i 0x1ebf oem unlock (to unlock your boot loader) as you used yuware or something that might created problem in bootloader so follow both.
fastboot -i 0x1ebf flash recovery name_of_recovery.img
and let it flash recovery then boot into recovery go to advance wipe format data type yes and swipe, install any custom rom and flash gapps done.
if you face still boot loops follow method 1 and flash roms later.
P.s while in fast-boot remove sim cards and memory cards from your phone and then run any commands.
and while flashing any roms please do remove sim cards.
Bhavesh_khatri said:
your device is soft bricked from where i see,
download the drives first for your device link :- https://androidmtk.com/download-yu-usb-driver
download adb platform tools:- https://dl.google.com/android/reposi...st-windows.zip
download recovery:- https://dl.twrp.me/tomato/
download the fast-boot firmware:- http://builds.cyngn.com/factory/tomato/cm-12.1-YOG4PAS8A4-tomato-signed-fastboot-a7a306cebd.zip
download factory image maker :- https://drive.google.com/open?id=0BxGRG9YXw62rUWNLMjdNaGt1a2s
method 1
extract the fast boot firmware and factory image maker in same folder. then follow these steps.
put your phone in fast-boot mode and type fastboot -i 0x1ebf oem unlock (will unlock your bootloader)
and now find flash_all.bat file in the folder where you extracted all files and run as admin. let the process finish you would be back at stock firmware with no boot loops.
if you don't want to go to factory image then
method 2
boot your phone in fastboot and type
fastboot -i 0x1ebf oem lock (to lock your bootloader)
fastboot -i 0x1ebf oem unlock (to unlock your boot loader) as you used yuware or something that might created problem in bootloader so follow both.
fastboot -i 0x1ebf flash recovery name_of_recovery.img
and let it flash recovery then boot into recovery go to advance wipe format data type yes and swipe, install any custom rom and flash gapps done.
if you face still boot loops follow method 1 and flash roms later.
P.s while in fast-boot remove sim cards and memory cards from your phone and then run any commands.
and while flashing any roms please do remove sim cards.
Click to expand...
Click to collapse
Need custom recovery
TWRP 3.0.2 not supported by YU5510A
sadique2804 said:
Need custom recovery
TWRP 3.0.2 not supported by YU5510A
Click to expand...
Click to collapse
TWRP is custom recovery itself, using it on my device since year, works fine you might have flashed wrong twrp. Try rom the link provided and remove every thing from phone before flashing twrp.
Bhavesh_khatri said:
TWRP is custom recovery itself, using it on my device since year, works fine you might have flashed wrong twrp. Try rom the link provided and remove every thing from phone before flashing twrp.
Click to expand...
Click to collapse
I know TWRP is custom recovery
But in my phone (YU5510A, Stock Android 4.4.4) it is not supported.
Whenever I am trying to install, it corrupt the recovery and the firmware of my phone.
After installing TWRP 3.0.2.0 (downloaded from official website under tomato section) my phone cant boot, it stuck on YU logo.
If you have the link please share.
sadique2804 said:
I know TWRP is custom recovery
But in my phone (YU5510A, Stock Android 4.4.4) it is not supported.
Whenever I am trying to install, it corrupt the recovery and the firmware of my phone.
After installing TWRP 3.0.2.0 (downloaded from official website under tomato section) my phone cant boot, it stuck on YU logo.
If you have the link please share.
Click to expand...
Click to collapse
Like i said your device is soft bricked try methods i suggested, but recovery should work fine press vol up+ vol down+power button to boot into recovery you would be able to use TWRP. if not try to flash recovery again as i said yuware might have introduced some bugs install as i suggested. your device stuck at boot loop has nothing to do with recovery not working.
---------- Post added at 08:03 PM ---------- Previous post was at 07:50 PM ----------
Try to flash older versions here is 2.8.4.0 if you on kit-kat or any,
https://dl.twrp.me/tomato/twrp-2.8.4.0-tomato.img
https://dl.twrp.me/tomato/twrp-2.8.5.0-tomato.img
https://dl.twrp.me/tomato/twrp-2.8.6.0-tomato.img
type
fastboot -i 0x1ebf flash recovery twrp-2.8.4.0-tomato.img
remove simcards and memory cards while flashing. hope this helps.
I flashed cm12.1 officially signed, and it worked and i recovered my device, but i want to flashed custom rom and it needs a custom recovery.
That's the problem, and I tried 2.8.7 and 2.8.6 and 2.8.5.
Currently I am on official cm12.1 with cm recovery.
I m also facing same problem.
---------- Post added at 08:26 PM ---------- Previous post was at 08:26 PM ----------
sadique2804 said:
I flashed cm12.1 officially signed, and it worked and i recovered my device, but i want to flashed custom rom and it needs a custom recovery.
That's the problem, and I tried 2.8.7 and 2.8.6 and 2.8.5.
Currently I am on official cm12.1 with cm recovery.
Click to expand...
Click to collapse
Your problem solved bro?
sadique2804 said:
I know TWRP is custom recovery
But in my phone (YU5510A, Stock Android 4.4.4) it is not supported.
Whenever I am trying to install, it corrupt the recovery and the firmware of my phone.
After installing TWRP 3.0.2.0 (downloaded from official website under tomato section) my phone cant boot, it stuck on YU logo.
If you have the link please share.
Click to expand...
Click to collapse
TRY TO UNLOCK BOOTLOADER FIRST.
Twrp won't install properly if the bootloader is locked.
IF THIS HELPS CLICK THANKS :good:
Hangs twrp
My phone got hanged at twrp yureka plus yu5510A stock lollipop plz help
ray pember said:
My phone got hanged at twrp yureka plus yu5510A stock lollipop plz help
Click to expand...
Click to collapse
Flash latest version of twrp using adb
Here is the link
https://dl.twrp.me/tomato/twrp-3.1.1-0-tomato.img.html
My device 5510a I install twrp but touch not working properly so plz help me....next what I do
sadique2804 said:
Hello,
I need help about my yureka plus on android (YU5510A),
I bought yureka plus yesterday and it comes on stock android 4.4.4 (Kitkat), I try to install custom rom and connect my phone to my laptop with help of YUWARE and try to unlock the bootloader in fastboot mode, it shows the successful message, but phone cant restart, I restart it manually, but it stuck on Yureka logo, trying again for flashing TWRP, same thing happen.
My phone (YU5510A) stuck on yureka plus logo.
So please help me.
Best Regards
Sadique A
Click to expand...
Click to collapse
hello for yureka i have some files I hope u don't try fastboot cause yureka have limited rom memory i have some files i encountered the worst case . i went to local vendor he did it for 3dollar. nd yes i read some yureka have a different board in the differnet country so files are bit messed up feel free to message i have somefiles try the luck or better search other thread developers are not doing a lot nowadays i was trying ubuntu but somehow sad life
Hii I have yu yureka plus (yu5510a) the phone is starting and stuck at YU logo after that blue screen appears and phone can't go ahead .
And When i connect the phone with pc it can't detected and an error shows in phone that "do not disconnect the data cable" & in bottom left "your phone is not secure" please help