CyanogenMod 13 is a free, community built distribution of Android 6.0.1 (Marshmallow) which greatly extends the capabilities of your phone.
This is the unofficial build of CM 13 for the OnePlus 3 (all variants).
OnePlus warranty covers software modifications!
Downloads:
ROM:
https://www.androidfilehost.com/?fid=24591000424948386
Recovery:
https://dl.twrp.me/oneplus3/
Sources:
https://github.com/CyanogenMod/andro...neplus_msm8996
https://github.com/CyanogenMod/andro...eplus_oneplus3
https://github.com/theMuppets/propri...vendor_oneplus
https://github.com/CyanogenMod/andro...ce_oppo_common
https://github.com/CyanogenMod/andro...ce_qcom_common
https://github.com/CyanogenMod/andro...opensource_Nfc
https://github.com/CyanogenMod/andro...rce_frameworks
https://github.com/CyanogenMod/andro...rce_libnfc-nci
Installation instructions:
You must unlock your bootloader via fastboot.
You must have a custom recovery installed (link above)
Fully wipe your device from Recovery if you are not coming from CM13.0 already.
Flash the downloaded ROM
Locate 6.0 Gapps via a quick Google search. (Make sure it‘s arm64)
Reboot into recovery and install the ROM.
Don‘t flash gapps after you booted up CM 13! This will kill your device. If you want gapps, then flash it right after you wiped your phone and flashed CM 13.
Known issues:
MSM8996: It‘s a new platform. Don‘t expect that CM 13 will run as good as stock.
Dash charge: Does not work, blame OnePlus for not releasing its sources in kernel.
Credits:
LG G5 devs, for their initial CM bringup to the MSM8996 platform
OnePlus, for the actual phone and the engineers helping me with sorting out few issues
Every CM contributor
Grarak
XDAevDB Information
CyanogenMod OnePlus 3, ROM for the OnePlus 3
Contributors
Grarak
_superman
ROM OS Version: 6.0.x Marshmallow
Version Information
Status: Beta
Created 2016-07-19
Last Updated 2016-07-09
Related
##########Welcome to my project########
CM_Mod_Installer.zip- Is a modification for Cyanogenmod 13
CM_MOD_Installer.zip:
=========================================
Features:
Added:
1.AOSP Browser
2.CMAccount
3.FMRadio(New)
4.Terminal Emulator (by Jack Palevich)
5.Torch(app)+Widget
6.VideoEditor
7.VoiceDialer
8.VoicePlus
9.*RomUpdater*
10.YahooWeatherProvider
============Themes:====================
=======================================
1.BlueThemeDark
2.GreenThemeLite
3.IndigoThemeLight
4.PinkThemeDark
=======================================
*RomUpdater* - is the program for update:
1.CM_Mod_Installer.zip
2.Android_System_Apps.zip
3.Apps.zip
4.Markets_Apps.zip
5.Themes.zip
=====================================
CM_Mod_Installer.zip- Is a modification for Cyanogenmod 13
Android_System_Apps.zip - this is an additional system apps for Cyanogenmod 13
Apps-This is a useful programs from google play(Only on site YouTube and on my site, on the website XDA file deleted)
Martkets apps(Markets_Apps.zip) - These are the top 5 stores for CM13
Themes.zip-These are the top 5 themes for CM13
=====================================
==========>>Download here<<===========
=====================================
=====================================
For Cyanogenmod 12.1 watch here(Supported only for Samsung Galaxy S3 mini[GT-I8190]) (There everything is shown in detail):
==========>>Watch here<<===============
For Cyanogenmod 13(Started with Cyanogenmod 13 supported for all devices)
New video: Soon( on YouTube for Cyanogenmod 13)
My site( All instruction and information here):
http://cyanogenmod-13-modified.blogspot.com/p/welcome-to-my-project-cmmodinstaller.html
My YouTube site:
https://www.youtube.com/channel/UC_ETKQn_2Fa0ILMRRAwWFNA
Google Apps
Cyanogenmod: http://cyanogenmod.org/
OpenGapps: http://opengapps.org/
TWRP Recovery: http://twrp.me/Devices/
=====================================
Instruction:
1. Install Cyanogenmod from this website: http://cyanogenmod.org/
2.Find the your device from the list and download firmware.
3.Install TWRP Recovery from this site: http://twrp.me/Devices/
*To find your device and download TWRP Recovery and how to install TWRP Recovery you will find in Google search engine.
4.To enter TWRP recovery, need to press power+Home(button)+volume Up or Power+Volume Up
5.Install firmware and GApps.
6.After Installed firmware and GApps install CM_Mod_Installer.zip
7.Done.
8.Files: Android_System_Apps.zip; Markets_Apps.zip; Apps.zip and Themes.zip(at will).
=============================================
=============================================
XDA:DevDB Information
Cyanogenmod 12.1/13 Modified for all device, ROM for all devices (see above for details)
Contributors
Ipav38
ROM OS Version: 6.0.x Marshmallow
Based On: Cyanogenmod(Modified)
Version Information
Status: Testing
Created 2016-06-01
Last Updated 2016-06-03
So if I install a CM12 for my phone this mod will make it CM13?
[Edit] Currently all that is available for my phone is an unnofficial CM12 mod.
Sent from my LGMS631 using XDA-Developers mobile app
Welcome to Tipsy OS
NOTE:
HTML:
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this Kernel
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
About Tipsy OS:
This is a slim based rom with lot of goodies added and awesomeness of RRO Layers. This rom is for people who want to stick to stability+performance accompanied with a slim base. This rom is well tested before release so expect a major stability
Features:
Initial release
Some Extra Features, which you will find out during your Adventure.
Bugs/Issues:
Same as Lineage OS by @FireLord
INSTALLATION INSTRUCTIONS:
Download the Latest Build From the Links Below.
Use Twrp Recovery that you currently have installed.
Take a Backup of your Current Rom.
Full Wipe and Factory Reset Your Device.
Flash the Rom zip File.
Flash Gapps zip File.
If you want Root, Flash the Magisk or SuperSU zip file according to your needs.
Reboot.
Enjoy!
Downloads:
ROM Gdrive
GitHub Source Codes:
Tipsy OS Source code
Device Tree
Kernel Tree
Vendor Tree
Credits:
XDA Developers Forum
Tipsy OS Team
@Subham for helping me do this.
@FireLord for making LOS for P2.
XDA:DevDB Information
[ROM][UNOFFICIAL] Tipsy OS [7.1.2][VoLTE], ROM for the Lenovo P2
Contributors
Pranay 7, Subham, Firelord
Source Code: https://github.com/TipsyOs
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: S244 Stock + TWRP
Based On: LOS
Version Information
Status: Stable
Current Stable Version: 6.8
Created 2017-10-07
Last Updated 2017-10-07
Screenshots
Screenshots
halogenOS for Lenovo P2
NOTE:
HTML:
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this Kernel
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
About halogenOS:
halogenOS, also known as XOS is a new Android ROM which ships with the global aim to
become a modular ROM which keeps as high as potentially possible operating
performance on your mobile device while still maintaining a sufficient feature
base of nice, small and minimal features that would not be available via any
external feature base, extension, mod or plugin.
We hope you have a truly halogenified experience!
Bugs/Issues:
Same as Lineage OS by @FireLord
INSTALLATION INSTRUCTIONS:
Download the Latest Build From the Links Below.
Use Twrp Recovery that you currently have installed.
Take a Backup of your Current Rom.
Full Wipe and Factory Reset Your Device.
Flash the Rom zip File.
Flash Gapps zip File.
If you want Root, Flash the Magisk or SuperSU zip file according to your needs.
Reboot.
Enjoy!
Downloads:
ROM
Open Gapps
GitHub Source Codes:
halogenOS Source Code
Device Tree
Kernel Tree
Vendor Tree
Credits:
XDA Developers Forum
XOS Team
@Subham for helping me do this.
@FireLord for making device trees.
XDA:DevDB Information
halogenOS 7.1.2 for Lenovo P2, ROM for the Lenovo P2
Contributors
Pranay 7, Subham, Firelord
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Unlocked Bootloader, S244 Stock + TWRP
Based On: AOSP+CAF
Version Information
Status: Stable
Created 2017-10-13
Last Updated 2017-10-13
Reserved
I can't show navigation bar on my device. What can i do?
Screenshot included
Nevermind i found a option to enable
is this rom under active development?
What is this CAF-based thingy?(I have read about it on internet, I mean whats the change in user experience- UX).
Our focus is to bring the Open Source community a quality OS that can run on all your devices as a daily driver, syncing your apps + settings + customizations across all platforms you run Bliss on.
Bliss ROMs comes with a wide selection of customization options from around the Android community as well as unique options developed by our team. With so many options available, you’ll find it hard not to enjoy the Blissful experience.
Download link : https://sourceforge.net/projects/unofficialrom/files/bliss/Bliss-v12.4-violet-UNOFFICIAL-20200226.zip/download
Gapps link : https://sourceforge.net/projects/nikgapps/files/Releases/Experimental-Q/10-Feb-2020/
XDA:DevDB Information
Bliss ROM For Redmi Note 7 Pro unofficial, ROM for all devices (see above for details)
Contributors
AFTAB 111
Source Code: https://github.com/BlissRoms
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
ROM Firmware Required: already added
Version Information
Status: Stable
Current Stable Version: 12.4
Stable Release Date: 2020-02-26
Created 2020-02-29
Last Updated 2020-02-29
So as I understood this rom is for redmi note 7 pro but it works for all devices so this is a gsi maybe
Man you really need to mention what is it for (rom,gsi,sgsi) otherwise no one would use it
Sent from my Phh-Treble vanilla using XDA Labs
AICP - Android Ice Cold Project for Redmi Go by Aryan Sinha (TechyMinati) @An ASP
[Highlights]
-Based On Android 10
-Initial Release
--------------------------------------------------------------------------------------------------------------------------------------
How to Flash/Install?
-Download Aicp.7z & Extract it, You will get AICP.img .
-Boot to twrp( Make sure you have unlocked bootloader and twrp installed properly)
-Wipe Data,Cache, Dalvik , System
-Flash AICP-10.0 as System Image
-Flash AICP Patch Zip
-Reboot
----------------------------------------------------------------------------------------------------------------------
[Download Links]
AICP 10.0 ROM
AICP 10.0 Patch
------------------------------------------------------------------------------------------------------------
[Bugs]
- Stock File Manager Doesnt Work Properly, Use Files Go by Google for FIx !
-------------------------------------------------------------------------------------------------------------------------------------------
Please Press Thanks On my xda thread !
XDA:DevDB Information
AICP - Android Ice Cold Project 10.0, ROM for all devices (see above for details)
Contributors
An ASP
ROM OS Version: Android 10
ROM Kernel: Linux 3.x
ROM Firmware Required: Stock ROM
Based On: AICP
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2020-10-09
Created 2020-10-09
Last Updated 2020-10-10
MOD ACTION:
Thread closed as duplicate of https://forum.xda-developers.com/android/development/rom-android-ice-cold-project-redmi-t4174835