TWRP error while flashing capps - Nexus 6P Q&A, Help & Troubleshooting

Hello,
I flashed CM 13 NIGHTLY from 15.07.2016 and wanted to flash capps for CM13. I always seem to get an error in TWRP saying:
Updater process ended with ERROR=7
Error flashing zip '/sdcard/capps-13.0-20160707-signed.zip'
I tried flashing other TWRP versions but it didn't help.
Can anyone help me, please?
The TWRP log is here: http://pastebin.com/LDacBqkb
Thank you.
EDIT: Just for your information, I even tried full wipe and everything... still not working at all... Please help me.

Try mounting /system as read-write in twrp before flashing capps.

svantes said:
Try mounting /system as read-write in twrp before flashing capps.
Click to expand...
Click to collapse
First shot!
Thank you, it works now!
Marked as solved.

Related

TWRP 3.0.0 won't install ROM

I'm trying to flash BlissPop for A500F. But i keep getting an error in TWRP 3 after /system starts to get formatted. I have tried multiple times to reinstall twrp but no luck :crying:
I keep getting the message: Updater Process ended with signal:6
Plz help!
Post the recovery log on pastebin

Need help....Not able to install cm-13.0-20160623-NIGHTLY-tomato.....

Hello guys , i am unable to install cm-13.0-20160623-NIGHTLY-tomato in my YU Yureka. Its stuck on "patching system image unconditionally"
I am using latset twrp 3.0.0.0 . I am on official Cos 12.1.
Before flashing i formatted system, dalvik-ART,cache,dalvik cache.
While installing there is no exception or error raised by recover. I kept my Yureka for 30-40 min with installation going on after so much time there is no progress, not a single percent. (and my memory card is also not shown in twrp recovery)
Then i tried to install recovery again and done the rom flashing procedure, it stucks on "Patching system image unconditionally".
Is there anything wrong with recovery or rom or i skipped any step?
plz help me guys.
@Aj_$tyle$
Use CM recovery to check if it is getting flashed. TWRP is also upgraded to 3.0.2-0. You can use that one too.
Also match SHA-1 of downloaded ROM zip file.
saurav007 said:
@Aj_$tyle$
Use CM recovery to check if it is getting flashed. TWRP is also upgraded to 3.0.2-0. You can use that one too.
Also match SHA-1 of downloaded ROM zip file.
Click to expand...
Click to collapse
dude i tried twrp 3.0.2.0 its not working for me...neither internal or external storage is shown in that recovery......lets try cm recovery...hope it will work for me
saurav007 said:
@Aj_$tyle$
Use CM recovery to check if it is getting flashed. TWRP is also upgraded to 3.0.2-0. You can use that one too.
Also match SHA-1 of downloaded ROM zip file.
Click to expand...
Click to collapse
tried CM recovery....in the middle of flashing it showing "Signature verification failed"....whats wrong with signature verification?
help me dude
@saurav007
i matched the sha 1 and they are same......
@saurav007
i matched the sha 1 and they are same......

twrp 2.8.7.2 Pinaslang zenfone recovery, E:error executing binary in zip

bro i have twrp 2.8.7.2 Pinaslang zenfone recovery.
and i have wipe all system, cache, etc everything.
my phone doesnt have os now
when i got to install Rom its give me error E:error executing binary in zip '/external_sd/#$#%#$%.zip
note: that my usb is not working, ADB is not working, it doest show in my computer or other computer.
solution please 
Use twrp by xanwar then u won't have any problems.
Sent from my ASUS_T00F using Tapatalk
imsandeshjagtap said:
bro i have twrp 2.8.7.2 Pinaslang zenfone recovery.
and i have wipe all system, cache, etc everything.
my phone doesnt have os now
when i got to install Rom its give me error E:error executing binary in zip '/external_sd/#$#%#$%.zip
note: that my usb is not working, ADB is not working, it doest show in my computer or other computer.
solution please 
Click to expand...
Click to collapse
Try this flashable droidboot, use your twrp, hope it work.
http://forum.xda-developers.com/zenfone-5/general/flashable-droidboot-zenfone-a500cg-t3396398
Then you can flash twrp by anwar.
imsandeshjagtap said:
bro i have twrp 2.8.7.2 Pinaslang zenfone recovery.
and i have wipe all system, cache, etc everything.
my phone doesnt have os now
when i got to install Rom its give me error E:error executing binary in zip '/external_sd/#$#%#$%.zip
note: that my usb is not working, ADB is not working, it doest show in my computer or other computer.
solution please 
Click to expand...
Click to collapse
i am in the same situation with you. how do i fix ?
paktepu said:
Try this flashable droidboot, use your twrp, hope it work.
http://forum.xda-developers.com/zenfone-5/general/flashable-droidboot-zenfone-a500cg-t3396398
Then you can flash twrp by anwar.
Click to expand...
Click to collapse
Can you help me please. I installed droidboot. What else can I do ?
Thanks...

Cant flash any ROM

So here is my problem i can't flash any custom rom i tried twrp cwm philz edition and the problem is the same i get stuck at* patching system image unconditionally at the very beginning of the blue line i tried with resurrection remix, slimrom, and other ROMs and when trying MIUI 8 i get an error couldn't mount system rw
Itried with adb sideload get stucked at 45%.
I e2fsck -y /dev/block/mmcblk0p23 wich is my system partition and fixed so many error but the problem stay the same ... i can flash a recovery or a kernel with no problem with TWRP the problem as i think when dealing with the system partition .. so im stuck with a stock rom that i flashed with odin btw who works great .. so is it my system partition messed up or the gpt table isnt right or is there a way to flash custom rom using odin
It could actually be the permissions. Other problem could be the recovery.
hi i know it's been a while since, but have you found a solution? I am getting exactly the same problem and tried everything possible. at the stage ready to sell it off ebay and upgrade if this doesn't work.
I had same problem with galaxy note 3 sprint variant and twrp 2.8.7.0 helped
If you are not getting twrp 2.8.7.0 try two or three lower versions
Don't use the latest twrp it won't work
1. Try to put custom rom to external storage microSD card or USB otg
2. If not helped 1. solution try older version TWRP 2.5.xx
This 2 solution help for me sometimes
You need to flash the latest TWRP.
Drhedphuk said:
You need to flash the latest TWRP.
Click to expand...
Click to collapse
Thanks, and I was on the latest already at the time of posting. Will try the two suggestions with getting the older versions of TWRP 2.8.7.0. Interestingly enough the CWM has done the same thing, as well as TWRP's sideload.
Will post back later.
tried all the possible versions of twrp, sideload, cwm, different roms, fixing permissions and formatting the partitions...no luck, still gets stuck at 45%. I guess it is time to give up and get myself a new xmas present.

Urgent help needed

I had rooted my yu yureka and flashed twrp . I had installed lineage os 14 and had it working very smoothly. A few days back I updated lineage os on it and also flashed it's volte modem files after updating twrp . Now it worked fine for some days and then one day it starts rebooting every now and then . And yesterday it developed something new.
It starts with yu logo and then goes dark for a second and then again displays yu logo and then again dark and ....... Loop goes on. But if you start charging it , it stays stuck on the yu logo . Also when I try to flash some other version of lineage os , it exits installation with error code 7
Is it hard bricked ?
Please give some solution for this asap
v1nashak said:
I had rooted my yu yureka and flashed twrp . I had installed lineage os 14 and had it working very smoothly. A few days back I updated lineage os on it and also flashed it's volte modem files after updating twrp . Now it worked fine for some days and then one day it starts rebooting every now and then . And yesterday it developed something new.
It starts with yu logo and then goes dark for a second and then again displays yu logo and then again dark and ....... Loop goes on. But if you start charging it , it stays stuck on the yu logo . Also when I try to flash some other version of lineage os , it exits installation with error code 7
Is it hard bricked ?
Please give some solution for this asap
Click to expand...
Click to collapse
Flash twrp 3.2.3
Flash du Oreo
https://androidfilehost.com/?fid=11410963190603842520
Rajendran Rasa said:
Flash twrp 3.2.3
Flash du Oreo
Click to expand...
Click to collapse
Did as you said and got .....
Updater process ended with signal :7
Error installing zip file '/external_sd/du_tomato....'
Updating partition details
Failed to mount '/system' (Invalid Argument)
v1nashak said:
Did as you said and got .....
Updater process ended with signal :7
Error installing zip file '/external_sd/du_tomato....'
Updating partition details
Failed to mount '/system' (Invalid Argument)
Click to expand...
Click to collapse
Wipe system, data, cache,
Then flash ROM
Rajendran Rasa said:
Wipe system, data, cache,
Then flash ROM
Click to expand...
Click to collapse
Did that too
Got same result
"
E1001 : Failed to update system image
Updater process ended with error : 7
Error installing zip file '.....'
Failed to mount '/system' (invalid argument)
"
Edit : Also if that's of any help , I am unable to use features of the twrp like installing zips and wiping without plugging in my phone because it shuts down while the process is going on
Somebody please help !
Dude the problem is of battery inserted. Change it and it would help .
A few days back I also had this problem. After changing the battery problem was solved.
To flash a clean room first wipe all partitions and then flash the image.
Updater process ended with signal :7
Error installing zip file '/external_sd/du_tomato....'
Updating partition details
Failed to mount '/system' (Invalid Argument)
This means your partition size is 1.4 gb only soc change it to 2.5 gb and then flash the image
saalimsam said:
Dude the problem is of battery inserted. Change it and it would help .
A few days back I also had this problem. After changing the battery problem was solved.
To flash a clean room first wipe all partitions and then flash the image.
Updater process ended with signal :7
Error installing zip file '/external_sd/du_tomato....'
Updating partition details
Failed to mount '/system' (Invalid Argument)
This means your partition size is 1.4 gb only soc change it to 2.5 gb and then flash the image
Click to expand...
Click to collapse
Battery problem solved !
Now could you please give me a step by step guide of next task
v1nashak said:
Battery problem solved !
Now could you please give me a step by step guide of next task
Click to expand...
Click to collapse
Flash stock ROM in fastboot
Rajendran Rasa said:
Flash stock ROM in fastboot
Click to expand...
Click to collapse
Please provide link for the stock ROM

Categories

Resources