Looking For From Suggestion - Verizon Galaxy S 5 Q&A, Help & Troubleshooting

Hi all.
I'm running a Verizon Galaxy S5 through the AT&T network. I'm running in to a handful of issues that I can't fix on the stock rom, to my knowledge at least, and was wondering if someone could suggest a rom that would still allow me to be on AT&T, so long as the rom works on the Verizon S5.
I'm not terribly fond of having 5gb of the phone taken up by the operating system, the constant "sim card not from Verizon" message, and the inability to remove the massive amount of bloatware.
What can you recommend that is stable and will work for my slightly unique scenario?
Thanks

Pb1 deodexed debloated rooted deknoxed by Jr Kruse with fixes and optional extra tweaks via a prop file you edit before you flash
http://forum.xda-developers.com/ver...t/vzwstock-based-tw-rom-3-4-16-t3329029/page1

Related

Galaxy S5 G900R4?

Is there any ROMs that support the galaxy s5 g900r4? (US cellular)
TheTechnicalBoss said:
Is there any ROMs that support the galaxy s5 g900r4? (US cellular)
Click to expand...
Click to collapse
I have asked about issues with the other roms not working. I lost calling, texting, and could only use wifi with all roms. I also had to remove the SD card prior to the phone allowing me to activate after flashing back to "stock."
I have not found one that works. I tried Phoenix and Alliance roms at first and was tired of flashing back to stock. You CAN use xposed framework and I have used kernels like Blaze. That is about all I've been able to find. You can find dedicated US cellular forums BUT you won't find much there unless something changed in the last day or two. Nobody would answer my questions about why their roms would not work and possibly how to get them to work Sorry, this is about all you'll find. I had a few issues and my threads were also deleted
..
I have unlocked every USC phone I've ever had...there's plenty of devolopment out there for USC phones. I haven't seen anything other than custom kernels yet for G900R4 though.
fffft said:
There aren't a lot of USC users here so we don't know much about your system. In the past, USC has locked their bootloaders and that is the key reason that you don't see much custom ROM development.
Also, USC (along with Sprint, Verizon) still use CDMA while the rest of the world is using GSM. That basic incompatibility also deters wider development.
Have a look at the Safestrap thread in the Verizon S5 forum. Safestrap is an app for loading an emulated custom ROM + recovery and can probably be used for USC as well.
.
Click to expand...
Click to collapse
XeCuTioN said:
I have unlocked every USC phone I've ever had...there's plenty of devolopment out there for USC phones. I haven't seen anything other than custom kernels yet for G900R4 though.
Click to expand...
Click to collapse
Does anyone know of a kernel that has SELinux set to permissive that will work? That's honestly the last thing I need. I wanted a bootloader unlocked phone that ran off CDMA so I can use it where I live so US Cellular seemed to be the solution.
US Cellular confirmed that the R4 has a unlocked bootloader. I am running a stock deoxed/debloated touchwiz. I am super surprised and disappointed that there hasn't been more interest and development for this phone. I am so tempted to trade it for a different.
G900r4
phillybizzle said:
US Cellular confirmed that the R4 has a unlocked bootloader. I am running a stock deoxed/debloated touchwiz. I am super surprised and disappointed that there hasn't been more interest and development for this phone. I am so tempted to trade it for a different.
Click to expand...
Click to collapse
I'm running a g900r4, (klteusc) as well. What rom are you using? I've been all over the gs5 unified and initial developments sections, and am currently using the cm11 unified while waiting for the slim rom unified. I'd gladly prefer a bloat free touch wiz though it seems the stock based roms are exclusive to g900f and the like.
{galaxy s5 g900r4 klteusc)
You guys want this http://teamuscellular.com/Forum/forum/411-galaxy-s5-romskernelsmods/
CM11, kernel w/o SELinux Enforcing, other goodies.
Head over to teamuscellular.com/forum and you should find a few available options to try. Including stock deodexed ncf ROM(touch wiz). And other custom Roms ported to USC. Like "cm 12 lollipop alpha." Looks good but no customization. As well as all stock Odin flashable zips. Some others like alliance and beanstalk have been ported, haven't tried those though. Hope this helps. Enjoy!

Stock firmware

Hi everyone. I am attempting to download the stock firmware for my Edge but can't find it. My phone has SM-G935A printed on the back. It is AT&T. The search feature on SAMMOBILE does not have that model. Is it ok to use a different firmware? It won't be AT&T anymore if I do, right?
The back of my phone gets really hot at times, especially right while booting. I wanted to try to root and put one of the custom ROMS on there but I am not doing anything till I find the correct Stock Firmware.
scm37390 said:
Hi everyone. I am attempting to download the stock firmware for my Edge but can't find it. My phone has SM-G935A printed on the back. It is AT&T. The search feature on SAMMOBILE does not have that model. Is it ok to use a different firmware? It won't be AT&T anymore if I do, right?
The back of my phone gets really hot at times, especially right while booting. I wanted to try to root and put one of the custom ROMS on there but I am not doing anything till I find the correct Stock Firmware.
Click to expand...
Click to collapse
Check out this forum, https://forum.xda-developers.com/att-s7-edge/how-to/updated-935u-935a-live-links-pi3-t3501686. I'm running my AT&T S7 Edge on this firmware, WWWWAAAAAAYYYYYY better than stock AT&T. It has NO AT&T bloatware and it has the Mobile Data On/Off toggle listed in the quick toggles bar. Before you flash this on your phone check what build you're on in the "about phone" in settings. Here is the link with the latest stock AT&T Firmware, https://forum.xda-developers.com/att-s7-edge/how-to/firmware-pi2-s7-edge-sm-g935a-10-03-16-t3477246. Download to your pc in case you want to flash back to stock. Don't root, not really stable if you do and you can't install any other firmware / ROM unless you flash 935U Firmware. You can brick your phone or even trip Knox counter and that will void your warranty if you needed to return to AT&T or Samsung.
ytaida said:
Check out this forum, https://forum.xda-developers.com/att-s7-edge/how-to/updated-935u-935a-live-links-pi3-t3501686. I'm running my AT&T S7 Edge on this firmware, WWWWAAAAAAYYYYYY better than stock AT&T. It has NO AT&T bloatware and it has the Mobile Data On/Off toggle listed in the quick toggles bar. Before you flash this on your phone check what build you're on in the "about phone" in settings. Here is the link with the latest stock AT&T Firmware, https://forum.xda-developers.com/att-s7-edge/how-to/firmware-pi2-s7-edge-sm-g935a-10-03-16-t3477246. Download to your pc in case you want to flash back to stock. Don't root, not really stable if you do and you can't install any other firmware / ROM unless you flash 935U Firmware. You can brick your phone or even trip Knox counter and that will void your warranty if you needed to return to AT&T or Samsung.
Click to expand...
Click to collapse
Hi and thanks. I don't care about warranty. I am thankful you explained that "ROOT" makes it unstable. How is it possible to flash custom ROMS without ROOT? Why is it so hard to find the dang firmware? I went back on that dang Sammobil to look for the stock firmware for a friends Verizon S7 Edge and I can't find THAT but NOW THE AT&T is there!!!!
It sounds to me like you are coming from an older phone that had an unlocked bootloader? Back in the day when flashing a new rom like paranoid or slimrom was the fun and cool way to differentiate your device from your friends. That was also a time when android was about as locked down as ios is now, and ios was still locking users into their own keyboard, and Samsung was scrapping with apple at every turn for the top seat in the mobile phone market. My how things have changed.
Android is much more open in some ways, there are far fewer things that most people need that require root access, and the device manufacturers have also begun locking down the devices much more. At least in the Samsung line, I don't know when the last US variant flagship bootloader was freely unlocked? The s3? I know I had a Verizon s6 that I could not even achieve root on following a certain point in the release cycle. Now we have all of these fun new terms like systemless root, magisk and engineering bootloader. It really comes down with what is your desired outcome from rooting. You can actually get a long way towards what you could do back then with a Samsung theme and the right apps.
I believe what ytaida is referring to is the ability to flash other s7 roms onto your phone. So while we may not be able to flash custom roms, anything with the correct bootloader can still be flashed. Typically with a phone that is only going to be in the same model, but Samsung kind of threw a curveball and created an incestual path for the s7. With their U firmware, (the 930U and 935U firmware shipped on the devices sold directly from Samsung as was mentioned above) you could flash an official version of that onto the tmobile, Verizon, att and a few other carriers hardware, and essentially change the model of the phone. From there changing it back was equally as easy, except changing it back could be changing a Verizon model into an att model. The radios were all the same. In this process a root exploit was achieved and some very smart (I am humbled by their knowledge and determination on these sites every day) folks started hacking together roms. So you will see some neat stuff done where you are never truly running as root, but there were modifications done as root somewhere along the line. Long story only mildly shorter. Be careful how far down the rabbithole you take this.
The next thing you know it could be 6am and you realize you've been downloading and archiving your own copies of stock Samsung firmware for the last 20 hours, for devices you don't even have lol..
Sure there are still custom roms out there, but as a US customer, if that is what you're looking for you are best off with a nexus device or One Plus.
scm37390 said:
Hi and thanks. I don't care about warranty. I am thankful you explained that "ROOT" makes it unstable. How is it possible to flash custom ROMS without ROOT? Why is it so hard to find the dang firmware? I went back on that dang Sammobil to look for the stock firmware for a friends Verizon S7 Edge and I can't find THAT but NOW THE AT&T is there!!!!
Click to expand...
Click to collapse
Is not hard, just need to look in correct forum. BTW what firmware you want. You can find any firmware you want for both models. Just look harder.
On Edge of Galaxy
A few things:
1) There doesn't appear to be any physical difference between the 935A, 935T, and 935U. You can, as long as you mind the bootloader version, freely switch between the three versions. I'm not sure about the Verizon and Spring versions.
2) The 935A FW link is around here. I've used it, and it worked fine, but you will be on tap for a few OTA updates.
3) The 935T FW link is actually available in several places, but there is a direct link over in the T-Mobile S7E forum. I'm not really sure what it gets you that the 935U doesn't, though. It has less bloat than AT&T, about the same amount of branding, and AT&T still refuses to let you have access to the more advanced call features. It does appear to be a lot less laggy than the 935A, though - AT&T really screwed up the Nougat upgrade compared to everyone else. It will likely get updates faster as well, and T-mobile doesn't have provisioning checks for tethering.
4) The 935U FW link is also "stock" for this phone, and works much better in many respects (it's certainly faster and less laggy) The difference between the 935A/935T and 935U firmware is that the former two have all the software needed for AT&T/T-mobile specific features, like WiFi calling, VoLTE, Visual Voicemail, etc. The latter has none of those things, but it does give you back BT tethering, disables the checks for WiFi and USB tethering, along with a few other features that were disabled.
Thus, you need to decide what is more important. Carrier specific calling features or more tethering options and overall better performance and battery life.
Please check the ORIGINAL post date!!!
I got the help I needed MONTHS ago. For those of you actually attempting to help,
"THANKS".
NORBARB, as a "SENIOR MEMBER" I would have expected much more than that and again, please look at the date I posted that question. Of course the firmware has shown up now. I don't even own that phone anymore.
How do you determine bootloader version?
jshamlet said:
A few things:
1) There doesn't appear to be any physical difference between the 935A, 935T, and 935U. You can, as long as you mind the bootloader version, freely switch between the three versions. I'm not sure about the Verizon and Spring versions.
2) The 935A FW link is around here. I've used it, and it worked fine, but you will be on tap for a few OTA updates.
3) The 935T FW link is actually available in several places, but there is a direct link over in the T-Mobile S7E forum. I'm not really sure what it gets you that the 935U doesn't, though. It has less bloat than AT&T, about the same amount of branding, and AT&T still refuses to let you have access to the more advanced call features. It does appear to be a lot less laggy than the 935A, though - AT&T really screwed up the Nougat upgrade compared to everyone else. It will likely get updates faster as well, and T-mobile doesn't have provisioning checks for tethering.
4) The 935U FW link is also "stock" for this phone, and works much better in many respects (it's certainly faster and less laggy) The difference between the 935A/935T and 935U firmware is that the former two have all the software needed for AT&T/T-mobile specific features, like WiFi calling, VoLTE, Visual Voicemail, etc. The latter has none of those things, but it does give you back BT tethering, disables the checks for WiFi and USB tethering, along with a few other features that were disabled.
Thus, you need to decide what is more important. Carrier specific calling features or more tethering options and overall better performance and battery life.
Click to expand...
Click to collapse
I'm interested in switching my unlocked Tmobile G935T to ATT G935A to take advantage of Wi-fi Calling. I'm not sure how to make sure I select the AT&T firmware that has the same bootloader as mentioned above.

Clarity on what root is required for

Hi,
I've done fairly extensive flashing (and bricking and modding on my LG g2 but gather things have changed a bit and am a little unsure if root actually required to flash a ROM like superman etc that is based on Samsung stock?
Or is root only required to install recovery, xposed and non stick ROMs?
Any ROM that has been modified in the least bit will be a custom rom.
Superman has some of the base Samsung stock programming, but very little.
Also, Superman, again like most other roms, will be rooted from the start. It gives not only the developers, but the end user much more flexibility and control over the entire OS.
You do not need to be rooted before loading a custom ROM. But, you will need to have the Bootloader unlocked, the proper custom rom ready to go.
https://forum.xda-developers.com/s7-edge
That should get you pointed in the right direction.
But, before you start loading, make sure that the firmware you're installing is for YOUR exact s7 edge, hardware and model specific.
There are two distinct hardware versions, the Snapdragon and the Exynos.
https://www.techwalls.com/samsung-galaxy-s7-edge-model-numbers-differences/
The link above will help you identify what brand and hardware version your edge is.
The same is true for official Samsung ROMs. Hardware and model are a huge factor in what ROM is compatible, but carrier is another factor that now comes into play.
The letter (or letter/number) that comes after the model number is a carrier specific phone.
Sm-935T is an S7 Edge, T-mobile carrier. Sm-935v is an s7 edge, Verizon carrier.
Each carrier specific model has different programs and cell network embedded in the ROM.
If you have a 935v, but have T-mobile as your current carrier, you can load the 935t rom on your 935v, unrooted.
But, Before you do that stuff, make sure to look through the XDA forums to get all the info prior to starting.
Having this information before you begin could mean the difference between a working phone or a shiny paper weight.
Tapatalk for Android - Works awesome on my Samsung Galaxy S7 Edge

Need S5 Stock Rom - Sprint G900P

Hi All,
My trusty S4 lost its life and I purchased a 'new' Sprint S5 G900P off ebay. I'm having issues getting sim card to work (should work per Ting) and I've already had a few weird popup ads... so I'm going to reflash it to a known good stock rom just in case.
I'm pretty sure this is the ROM I want.
https://www.sammobile.com/firmwares/galaxy-s5/SM-G900P/SPR/download/G900PVPS3CQC1/128502/
I'm hoping to verify. And is reloading this rom just a matter of putting it to my microSD card and flashing it from the bootloader? Since I'm going for the stock rom I wasn't sure if I needed any additional tools.
Per my status page, I currently have the following. Keep in mind I haven't fully updated it just yet. I just did a factory reset and haven't reloaded anything since seeing the popups. So this is how it came.
Software Version
G900PVPS3CQD1
Hardware Version
G900P.04
Model Number
SM-G900P
Android Version
6.0.1

I have yet to find a simple guide on "How to load a custom ROM on your AT&T S7 Edge"

I have yet to find a simple guide on "How to load a custom ROM on your AT&T S7 Edge"
I've traveled all over the interwebs, including this website and many others but have not found a simple guide for noobs. I read about CWM, TWRP, Odin, rooting, zip files, tar files, nandroid, backup ROM, root with app, root via computer, blah, blah, blah, blah....
All I know is that before I do anything I want to backup the stock ROM but before that I'm thrown all kinds of different tools and processes that one could use. For the noob it should be as simple as:
Step 1: backup your stock ROM and to do this download/install this tool then follow these instructions.
Step 2: root your S7 Edge and to do this download/install this tool then follow these instructions.
Step 3: find a custom ROM you want to install and to do this go here, here or here for you model and download it to your PC.
Step 4: flash your custom ROM and to do this down/install this tool and follow these instructions.
Maybe I haven't done a good job of searching so shame on me but I don't feel like given the effort I've expended thus far has yielded a straight and easy answer when it probably should be. I seem to run across a lot of promising reads/threads about this only to find that there seems to be so much more knowledge and experience with the SM-935F and not so much with the SM-935A variant. On top of it, it would seem that I'm told that rooting will or will not break Samsung Pay and other apps/features or that the flag will or will not permanently trip that shows the device has been modified. Very confusing.
When I'm presented with a tar/zip download I'm not sure to where I'm supposed to be downloading. To my PC then used Odin s/w on the PC to install via USB cable to the handset?
Can someone please point me to the simple guide to get this going...or am I gonna have to write it myself? TIA.
BTW, I should note that I'm coming from a S3 on Virgin Mobile to a S7 Edge SM-G935A to be used on Cricket Wireless (AT&T). Since I'll be on Cricket and not directly a AT&T customer per se I'd like to get rid of all the bloatware that AT&T was so kind to load up on the handset. Right now it has Nougat 7.0 installed: samsung/hero2qlteuc/hero2qlteatt:7.0/NRD90M/G935AUCU4BQA6
I am not sure if you have a US version the S7 (Qualcomm G935A) or the S7 non US version. But if you have the US version, we are out of luck. Our bootloader is completely locked and all those steps you pointed out are not available.
Sent from my SAMSUNG-SM-G935A using Tapatalk
freeop said:
I am not sure if you have a US version the S7 (Qualcomm G935A) or the S7 non US version. But if you have the US version, we are out of luck. Our bootloader is completely locked and all those steps you pointed out are not available.
Sent from my SAMSUNG-SM-G935A using Tapatalk
Click to expand...
Click to collapse
So it seems that with all USA Qualcomm versions regardless of GSM carrier you have confirmed we pretty much cannot do much other than load some other versions of firmware such the U version ROM? From what I read HERE this is the Marshmallow 6.0 o/s. I currently have the stock Nougat 7.0 firmware from AT&T on my S7 Edge. Is there a debloated 7.0 version of the U ROM available?
UPDATE: Never mind...I came across THIS THREAD regarding an unbloated 7.0 U-version. I see you were active in that thread so now I need to read the entire thing before I have more questions and if so I'll ask them there. Thanks!
SyberTiger said:
So it seems that with all USA Qualcomm versions regardless of GSM carrier you have confirmed we pretty much cannot do much other than load some other versions of firmware such the U version ROM? From what I read HERE this is the Marshmallow 6.0 o/s. I currently have the stock Nougat 7.0 firmware from AT&T on my S7 Edge. Is there a debloated 7.0 version of the U ROM available?
UPDATE: Never mind...I came across THIS THREAD regarding an unbloated 7.0 U-version. I see you were active in that thread so now I need to read the entire thing before I have more questions and if so I'll ask them there. Thanks!
Click to expand...
Click to collapse
If you still want to root your phone, you can follow this link and will let you get rid of all the bloat and root your phone, install xposed and all the mods for xposed. I have used the ENG.IMG version of root for the G935A over 6 months ago and it works great, given the choices we have.
Here's the link: https://forum.xda-developers.com/tm...eres-how-rooted-nougat-s7-edge-g935t-t3567502
I know the thread is in the T-Mobile section but if you read the first line, it says it works for T-Mobile, ATT, Sprint, Verizon, etc. It is a very long thread but if you read mostly the later posts from @Craz Basics and you will be able to see that it works really nice.
Good luck
freeop said:
If you still want to root your phone, you can follow this link and will let you get rid of all the bloat and root your phone, install xposed and all the mods for xposed. I have used the ENG.IMG version of root for the G935A over 6 months ago and it works great, given the choices we have.
Here's the link: https://forum.xda-developers.com/tm...eres-how-rooted-nougat-s7-edge-g935t-t3567502
I know the thread is in the T-Mobile section but if you read the first line, it says it works for T-Mobile, ATT, Sprint, Verizon, etc. It is a very long thread but if you read mostly the later posts from @Craz Basics and you will be able to see that it works really nice.
Good luck
Click to expand...
Click to collapse
Hey thanks....but I have another question now that I'm given choices.
Which ROM is better, the U 7.0 ROM or the T-Mobile ROM you just linked? And, why is it better than the other?
SyberTiger said:
Hey thanks....but I have another question now that I'm given choices.
Which ROM is better, the U 7.0 ROM or the T-Mobile ROM you just linked? And, why is it better than the other?
Click to expand...
Click to collapse
Ok the U 7.0 ROM is still un-rooted and bootloader locked. If you go that way, you get the U ROM with-out all the Bloat. But nothing more.
And the link is not really for the T-Mobile phone only. The ENG.IMG is for all makes of the Qualcomm chip. You install that and you are still with ATT. Still have all the things ATT provides like WiFi-Calling and other ATT things. And you can get rid of the Bloatware from the ATT ROM using different apps, like Titanium Backup. With the ENG.IMG you can root your phone and use all the apps that are available for Rooted Phones. One of the best is Titanium Backup. You can only use that one Rooted phones. If you have the U 7.0 ROM, you will have to use the same ENG.IMG to Root the U 7.0 ROM to get that OS rooted. And as I mentioned before you can use Xposed with the rooted phone.
If you are just looking to get rid of Bloatware on the ATT, there is an app for that also. Check out BK Disabler in the playstore. You can get rid of all the bloatware without rooting your phone.
Anyway, hope this make some kind of sense...
freeop said:
Ok the U 7.0 ROM is still un-rooted and bootloader locked. If you go that way, you get the U ROM with-out all the Bloat. But nothing more.
And the link is not really for the T-Mobile phone only. The ENG.IMG is for all makes of the Qualcomm chip. You install that and you are still with ATT. Still have all the things ATT provides like WiFi-Calling and other ATT things. And you can get rid of the Bloatware from the ATT ROM using different apps, like Titanium Backup. With the ENG.IMG you can root your phone and use all the apps that are available for Rooted Phones. One of the best is Titanium Backup. You can only use that one Rooted phones. If you have the U 7.0 ROM, you will have to use the same ENG.IMG to Root the U 7.0 ROM to get that OS rooted. And as I mentioned before you can use Xposed with the rooted phone.
If you are just looking to get rid of Bloatware on the ATT, there is an app for that also. Check out BK Disabler in the playstore. You can get rid of all the bloatware without rooting your phone.
Anyway, hope this make some kind of sense...
Click to expand...
Click to collapse
Thanks, appreciate it.
I'm really not planning on spending a lot of time making changes or tweaking the handset. I'm on Cricket Wireless therefore I don't see any value in the AT&T bloatware which is why I wanted it removed. My interest is primarily having the latest/greatest android version I can have without all the stuff junking it up. I'd like it to be as fast as is reasonably possibly but at the same time have reasonably good battery life. I'm coming from a Galaxy S3 on Virgin Mobile so the change to the S7E is a huge upgrade. I haven't figured out yet if there are any apps (that require rooting) that are so slick I can't live without them.
I installed the U 7.0 and as I recall I got about 5 or 6 OTA updates which in encouraging. I think the AT&T ROM never received any of the 3 or 4 most current security updates. Anyhow, U 7.0 is up and running with no AT&T bloatware.
SyberTiger said:
Thanks, appreciate it.
I'm really not planning on spending a lot of time making changes or tweaking the handset. I'm on Cricket Wireless therefore I don't see any value in the AT&T bloatware which is why I wanted it removed. My interest is primarily having the latest/greatest android version I can have without all the stuff junking it up. I'd like it to be as fast as is reasonably possibly but at the same time have reasonably good battery life. I'm coming from a Galaxy S3 on Virgin Mobile so the change to the S7E is a huge upgrade. I haven't figured out yet if there are any apps (that require rooting) that are so slick I can't live without them.
I installed the U 7.0 and as I recall I got about 5 or 6 OTA updates which in encouraging. I think the AT&T ROM never received any of the 3 or 4 most current security updates. Anyhow, U 7.0 is up and running with no AT&T bloatware.
Click to expand...
Click to collapse
AT&T's software updater only works if you have an AT&T SIM card. This is why the first thing you should do if you buy an AT&T (or other carrier) device that you don't plan to use on that network is to convert it to the unlocked version. That, and AT&T (in particular) loads the crap out of their devices with bloatware to the point that switching to U feels like an early upgrade to the next generation device.
jshamlet said:
AT&T's software updater only works if you have an AT&T SIM card. This is why the first thing you should do if you buy an AT&T (or other carrier) device that you don't plan to use on that network is to convert it to the unlocked version. That, and AT&T (in particular) loads the crap out of their devices with bloatware to the point that switching to U feels like an early upgrade to the next generation device.
Click to expand...
Click to collapse
Yeah, I have a Cricket SIM which explains why this unlocked handset is stuck on 7.0 G935AUCU4BQA6 which is the February 1, 2017 update. Interestingly enough, the Network Signal Info app shows the SIM Operator as AT&T and Network Operator as Cricket/AT&T.
Going to the U got rid of all the bloatware and the handset immediately started receiving 5 or 6 OTA updates. I'll probably stick with the U version unless it becomes apparent there's a significantly better ROM available that increases performance, battery life or really adds some whizbangs that make the S7E experience a lot better.
forgive me for butting in -- I have a SM-G935A (stock) on Cricket as well.
Updates to the ROM and while keeping Samsung Pay are important to me.
In the past, I have d/led ATT updates and installed them using Odin, but that wipes my phone's apps/settings each time. Recently, I purchased an ATT sim & put the minimum $$$ on it with the intention of popping it in for OTA's. I've received BQK2, Nov 1 2017. It's a crappy work around, but the easiest I know of without having to rebuild my phone each Odin'ed update.
Would installing U or TMO firmware on the 935A remove the ability to use Samsung Pay? Would either of them be updated for frequently/easier than the 935A?
The U firmware supports Samsung pay and gets updates directly. The only downsides are no carrier features like wifi calling, etc., and if gets updates later than the carrier versions. I have run it on AT&T since I got the phone and it has worked fine.
jshamlet said:
The U firmware supports Samsung pay and gets updates directly. The only downsides are no carrier features like wifi calling, etc., and if gets updates later than the carrier versions. I have run it on AT&T since I got the phone and it has worked fine.
Click to expand...
Click to collapse
Thanks, jshamlet.
This is my first phone I haven't rooted & I feel a bit powerless without Xposed and Titanium Backup. I find myself using Samsung Pay so often, that I don't want to lose it & was concerned that installing the U (or TMO) firmware on the ATT version would trip Knox, too.
William Thornton said:
forgive me for butting in -- I have a SM-G935A (stock) on Cricket as well.
Updates to the ROM and while keeping Samsung Pay are important to me.
In the past, I have d/led ATT updates and installed them using Odin, but that wipes my phone's apps/settings each time. Recently, I purchased an ATT sim & put the minimum $$$ on it with the intention of popping it in for OTA's. I've received BQK2, Nov 1 2017. It's a crappy work around, but the easiest I know of without having to rebuild my phone each Odin'ed update.
Would installing U or TMO firmware on the 935A remove the ability to use Samsung Pay? Would either of them be updated for frequently/easier than the 935A?
Click to expand...
Click to collapse
Hmm, doesn't Samsung Smart Switch back up everything?
SyberTiger said:
Hmm, doesn't Samsung Smart Switch back up everything?
Click to expand...
Click to collapse
I've never gotten it working 100%.
William Thornton said:
I've never gotten it working 100%.
Click to expand...
Click to collapse
I'd be talking about the PC version not the phone-to-phone setup. Back up to PC then from PC to your phone. Worked great for me.
SyberTiger said:
Hmm, doesn't Samsung Smart Switch back up everything?
Click to expand...
Click to collapse
Um, no. No it doesn't. Helium (or if you are feeling oldster, ADB) does a vastly better job of backing up apps than Smart Switch. Smart Switch does a reasonably good job of putting your phone's settings back, but it doesn't appear to back up most app data.
I learned this the hard way.
---------- Post added at 01:51 AM ---------- Previous post was at 01:47 AM ----------
William Thornton said:
Thanks, jshamlet.
This is my first phone I haven't rooted & I feel a bit powerless without Xposed and Titanium Backup. I find myself using Samsung Pay so often, that I don't want to lose it & was concerned that installing the U (or TMO) firmware on the ATT version would trip Knox, too.
Click to expand...
Click to collapse
Samsung Pay, with the MST technology, is one of those weirdly underrated features that continually amaze people. It works nearly anywhere you can physically see the mag stripe reader, which instantly makes it vastly more useful than either Apple Pay or Android Pay. I have had more than a few people say "We don't take Apple Pay", and then drop their jaw when the transaction goes through.
The fact that Samsung doesn't make a bigger deal about it is strange, because it really is one of those technologies that sets them apart from the other two.

Categories

Resources