Related
First of all i want to say thankyou to the xda community who help people like us and build rooting and other flashing softwares.
So, this is probably my first post on xda, first for sure when i'm stuck and asking for help
Background of the Problem:
I was on OS 2.1.2 rooted with twrp recovery. (was really happy with my phone)
MM 3.0.2 upgrade comes and i decide to upgrade my phone manually (since ota was disabled due to root)
All goes well in first try..(did a dirty flash) OP2 3.0.2 runs smoothly
However, i found out i had lost root and couldn't boot into recovery.
I ignored for a month when i decided it was too hard to go on without root now..
So i searched through a few forums, went into fastboot tried oem unlocking.. failed.. Stuck hard in the bootloop..
Searched for about 3hours and used the MSM tool to finally unlock bootloader.. but still stuck at bootloop and no luck with recovery.. I couldn't boot into my installed rom(3.0.2)
I flashed recovery from OOS 2.1.2 or 2.0.1 and booted into recovery and flashed 2.1.2 again..
So now, 2.1.2 runs fine on my phone
I have refered to these guides/files while trying to install 3.0.2 or trying to recover my phone
http://forum.xda-developers.com/onep...s-3-x-t3392826
https://www.androidfilehost.com/?w=f...f4a13afecc347f
https://www.androidfilehost.com/?w=f...9e2340a15d9033
https://forums.oneplus.net/threads/u...plus-2.347607/
http://forum.xda-developers.com/oneplus-2/general/zip-oxygenos-3-x-t3392826
PROBLEM:
Whenever i update my phone to 3.0.2, it stucks at the bootloop (showing oneplus logo and cmd showing it in fastboot mode)
i lose recovery and rom
i have tried flashing grarak recovery and hybrid recovery (both of which i believe are modded recovery for OOS MM)
In cmd, fastboot flash command completes without any problem but the phone doesnt boot to recovery and both give an error while giving the fastboot boot command
" downloading boot.img
OKAY
booting...
FAILED (remote: dtb not found)"
finished. "
Please suggest me something so that i can boot into 3.0.2 without bootloop problem.. 3.0.2 runs really smooth..
and additionally if possible, i would like to root but thats secondary.
Thankyou guys in advance. Please help a brother out
Sahaj4 said:
First of all i want to say thankyou to the xda community who help people like us and build rooting and other flashing softwares.
So, this is probably my first post on xda, first for sure when i'm stuck and asking for help
Background of the Problem:
I was on OS 2.1.2 rooted with twrp recovery. (was really happy with my phone)
MM 3.0.2 upgrade comes and i decide to upgrade my phone manually (since ota was disabled due to root)
All goes well in first try..(did a dirty flash) OP2 3.0.2 runs smoothly
However, i found out i had lost root and couldn't boot into recovery.
I ignored for a month when i decided it was too hard to go on without root now..
So i searched through a few forums, went into fastboot tried oem unlocking.. failed.. Stuck hard in the bootloop..
Searched for about 3hours and used the MSM tool to finally unlock bootloader.. but still stuck at bootloop and no luck with recovery.. I couldn't boot into my installed rom(3.0.2)
I flashed recovery from OOS 2.1.2 or 2.0.1 and booted into recovery and flashed 2.1.2 again..
So now, 2.1.2 runs fine on my phone
I have refered to these guides/files while trying to install 3.0.2 or trying to recover my phone
http://forum.xda-developers.com/onep...s-3-x-t3392826
https://www.androidfilehost.com/?w=f...f4a13afecc347f
https://www.androidfilehost.com/?w=f...9e2340a15d9033
https://forums.oneplus.net/threads/u...plus-2.347607/
http://forum.xda-developers.com/oneplus-2/general/zip-oxygenos-3-x-t3392826
PROBLEM:
Whenever i update my phone to 3.0.2, it stucks at the bootloop (showing oneplus logo and cmd showing it in fastboot mode)
i lose recovery and rom
i have tried flashing grarak recovery and hybrid recovery (both of which i believe are modded recovery for OOS MM)
In cmd, fastboot flash command completes without any problem but the phone doesnt boot to recovery and both give an error while giving the fastboot boot command
" downloading boot.img
OKAY
booting...
FAILED (remote: dtb not found)"
finished. "
Please suggest me something so that i can boot into 3.0.2 without bootloop problem.. 3.0.2 runs really smooth..
and additionally if possible, i would like to root but thats secondary.
Thankyou guys in advance. Please help a brother out
Click to expand...
Click to collapse
Follow this step one by one ..
1. Flash this recovery via firstboot
https://drive.google.com/file/d/0B0OiN2evbEPuNk5KejhvLWsyeDg/view?usp=drivesdk
2. Now boot into recovery and flash this zip firmware .
https://drive.google.com/file/d/0B0OiN2evbEPucnBkUGZIdlZCSnM/view?usp=drivesdk
3. Now boot into new recovery and flash oxygen os 3.x.x .
That's it.
4. If camera or other sensor not work flash this persist.img file via firstboot.
https://drive.google.com/file/d/0B0OiN2evbEPueVNEQTdUSHJYTHM/view?usp=drivesdk
Jyoti_re said:
Follow this step one by one ..
1. Flash this recovery via firstboot
https://drive.google.com/file/d/0B0OiN2evbEPuNk5KejhvLWsyeDg/view?usp=drivesdk
2. Now boot into recovery and flash this zip firmware .
https://drive.google.com/file/d/0B0OiN2evbEPucnBkUGZIdlZCSnM/view?usp=drivesdk
3. Now boot into new recovery and flash oxygen os 3.x.x .
That's it.
4. If camera or other sensor not work flash this persist.img file via firstboot.
https://drive.google.com/file/d/0B0OiN2evbEPueVNEQTdUSHJYTHM/view?usp=drivesdk
Click to expand...
Click to collapse
Heyy.. Thanks a lot Jyoti_re! It worked out perfectly..
I have done till step 3.. The phone booted into 3.0.2
The sensors are not working. I will flash the presist.img as you said in step 4
However, i have encountered a problem. My OP2 is a 64 GB version. But now the internal storage shows 7gb free out of 9.66 GB.. Earlier it used to show 54GB instead of 9.66..
What should i do?
Thanks again
Yes u must have to flash persist.img via firstboot mode by typing [ fastboot flash persist ] for sensor correctly working.
Install es file explorar from play store and check which folder taking More space
don't forget to press thanks if I helped u.
Thanks a lot Jyoti! /
Yeah i got it.. Flashed the persist img.
i searched through the forums.. somehow my device got the 16gb version img.. i dont know how..
i had to flash userdata64G.img as well
Now it all works perfectly.. sensors are working.. data storage is back at 54gb..
Thanks a lot! I had been stuck on this bootloop since 3 days..
and i pressed the thanks button.. i will press it 100 times over if possible Thanks again! Cheers!
Just to confirm.. Can i flash supersu via recovery now to get root? i hope it wont lead me to bootloops.. If there is some specific supersu file to flash for OOS 3.0.2 please guide me to it.. Thanks!
Sahaj4 said:
Just to confirm.. Can i flash supersu via recovery now to get root? i hope it wont lead me to bootloops.. If there is some specific supersu file to flash for OOS 3.0.2 please guide me to it.. Thanks!
Click to expand...
Click to collapse
Flash this SuperSU
https://drive.google.com/file/d/0B0OiN2evbEPuZk1KSk1hYUpEazA/view?usp=drivesdk
don't forget to press thanks if I helped u.
OP2 stuck in bootloop on upgrading from 2.0.2 to 3.0.2
Hi guys and thanks to all xda developers community for helping us. I'm trying to root my op2 via fastboot,using the comand fastboot oem unlock,but always having this message: <remote oem unlock is disabled>. And when i try to use volume down+power to get in recovery mode the op2 vibrate and flashes the screen and do nothing. I'm not having access to do anything with the op2. Please help...
ciroportugues said:
Hi guys and thanks to all xda developers community for helping us. I'm trying to root my op2 via fastboot,using the comand fastboot oem unlock,but always having this message: <remote oem unlock is disabled>. And when i try to use volume down+power to get in recovery mode the op2 vibrate and flashes the screen and do nothing. I'm not having access to do anything with the op2. Please help...
Click to expand...
Click to collapse
Have u enabled OEM unlocking in developer option ??
No i forgot to enable...
No i forgot to enable... What can i do now?
---------- Post added at 06:44 AM ---------- Previous post was at 06:39 AM ----------
Jyoti_re said:
Have u enabled OEM unlocking in developer option ??
Click to expand...
Click to collapse
No iforgot to enable...
What can i do now?
ciroportugues said:
No i forgot to enable... What can i do now?
---------- Post added at 06:44 AM ---------- Previous post was at 06:39 AM ----------
No iforgot to enable...
What can i do now?
Click to expand...
Click to collapse
Go thru "METHOD 1" of this post and fill free to contact if u face any problem.
https://forums.oneplus.net/threads/...ck-guide-for-a-hard-bricked-oneplus-2.347607/
Jyoti_re said:
Go thru "METHOD 1" of this post and fill free to contact if u face any problem.
https://forums.oneplus.net/threads/...ck-guide-for-a-hard-bricked-oneplus-2.347607/
Click to expand...
Click to collapse
Hi. I tried to do every steps in method 1,but when i try to enter to recovery mode my op2 vibrate and flash the screen till i stop pressing the power button,and never get into recovery mode.
ciroportugues said:
Hi. I tried to do every steps in method 1,but when i try to enter to recovery mode my op2 vibrate and flash the screen till i stop pressing the power button,and never get into recovery mode.
Click to expand...
Click to collapse
After use the recovery tool the op2 restarts and stuck into powered by android nothing more happens.
ciroportugues said:
After use the recovery tool the op2 restarts and stuck into powered by android nothing more happens.
Click to expand...
Click to collapse
What does the Device Manager show when you connect your phone? By what name is it identified?
Thanks for reply. When i put press volume+and- shows qualcomm hs-usb qdloader9008 (com29),and when i put into fastboot shows android bootloader interface,and when stucks into start shows the same(android bootloader interface).
---------- Post added at 10:06 PM ---------- Previous post was at 09:37 PM ----------
Sahaj4 said:
What does the Device Manager show when you connect your phone? By what name is it identified?
Click to expand...
Click to collapse
Thanks for reply. When i put press volume+and- shows qualcomm hs-usb qdloader9008 (com29),and when i put into fastboot shows android bootloader interface,and when stucks into start shows the same(android bootloader interface).
When you are in fastboot mode..
Try giving the command
"fastboot continue"
or
"fastboot reboot-bootloader"
"fastboot continue"
(without quotes) if your system files are not corrupt, it will boot you into your rom.. and then enable oem unlocking from settings
Tried this commands and the system reboots and stucks on the screen powered by android.
---------- Post added at 12:27 AM ---------- Previous post was at 12:25 AM ----------
Sahaj4 said:
When you are in fastboot mode..
Try giving the command
"fastboot continue"
or
"fastboot reboot-bootloader"
"fastboot continue"
(without quotes) if your system files are not corrupt, it will boot you into your rom.. and then enable oem unlocking from settings
Click to expand...
Click to collapse
Tried this commands but the sistem reboots and stucka on powered by android
ciroportugues said:
Tried this commands and the system reboots and stucks on the screen powered by android.
---------- Post added at 12:27 AM ---------- Previous post was at 12:25 AM ----------
Tried this commands but the sistem reboots and stucks on powered by android
Click to expand...
Click to collapse
Hi. want to know if you anymore command to help me? thanks for help
ciroportugues said:
Hi. want to know if you anymore command to help me? thanks for help
Click to expand...
Click to collapse
I don't know much.. only as much as i have tried..
try running the command
fastboot oem device-info
if your device is unlocked, you are lucky! then there are many options
but if your device is locked.. then as far as i know, msm tool is your only saviour
try using this guide to unbrick your phone
https://forums.oneplus.net/threads/...ck-guide-for-a-hard-bricked-oneplus-2.347607/
Hello,
I need help about my yureka plus on android (YU5510A),
I bought yureka plus yesterday and it comes on stock android 4.4.4 (Kitkat), I try to install custom rom and connect my phone to my laptop with help of YUWARE and try to unlock the bootloader in fastboot mode, it shows the successful message, but phone cant restart, I restart it manually, but it stuck on Yureka logo, trying again for flashing TWRP, same thing happen.
My phone (YU5510A) stuck on yureka plus logo.
So please help me.
Best Regards
Sadique A
sadique2804 said:
Hello,
I need help about my yureka plus on android (YU5510A),
I bought yureka plus yesterday and it comes on stock android 4.4.4 (Kitkat), I try to install custom rom and connect my phone to my laptop with help of YUWARE and try to unlock the bootloader in fastboot mode, it shows the successful message, but phone cant restart, I restart it manually, but it stuck on Yureka logo, trying again for flashing TWRP, same thing happen.
My phone (YU5510A) stuck on yureka plus logo.
So please help me.
Best Regards
Sadique A
Click to expand...
Click to collapse
your device is soft bricked from where i see,
download the drives first for your device link :- https://androidmtk.com/download-yu-usb-driver
download adb platform tools:- https://dl.google.com/android/reposi...st-windows.zip
download recovery:- https://dl.twrp.me/tomato/
download the fast-boot firmware:- http://builds.cyngn.com/factory/tomato/cm-12.1-YOG4PAS8A4-tomato-signed-fastboot-a7a306cebd.zip
download factory image maker :- https://drive.google.com/open?id=0BxGRG9YXw62rUWNLMjdNaGt1a2s
method 1
extract the fast boot firmware and factory image maker in same folder. then follow these steps.
put your phone in fast-boot mode and type fastboot -i 0x1ebf oem unlock (will unlock your bootloader)
and now find flash_all.bat file in the folder where you extracted all files and run as admin. let the process finish you would be back at stock firmware with no boot loops.
if you don't want to go to factory image then
method 2
boot your phone in fastboot and type
fastboot -i 0x1ebf oem lock (to lock your bootloader)
fastboot -i 0x1ebf oem unlock (to unlock your boot loader) as you used yuware or something that might created problem in bootloader so follow both.
fastboot -i 0x1ebf flash recovery name_of_recovery.img
and let it flash recovery then boot into recovery go to advance wipe format data type yes and swipe, install any custom rom and flash gapps done.
if you face still boot loops follow method 1 and flash roms later.
P.s while in fast-boot remove sim cards and memory cards from your phone and then run any commands.
and while flashing any roms please do remove sim cards.
Bhavesh_khatri said:
your device is soft bricked from where i see,
download the drives first for your device link :- https://androidmtk.com/download-yu-usb-driver
download adb platform tools:- https://dl.google.com/android/reposi...st-windows.zip
download recovery:- https://dl.twrp.me/tomato/
download the fast-boot firmware:- http://builds.cyngn.com/factory/tomato/cm-12.1-YOG4PAS8A4-tomato-signed-fastboot-a7a306cebd.zip
download factory image maker :- https://drive.google.com/open?id=0BxGRG9YXw62rUWNLMjdNaGt1a2s
method 1
extract the fast boot firmware and factory image maker in same folder. then follow these steps.
put your phone in fast-boot mode and type fastboot -i 0x1ebf oem unlock (will unlock your bootloader)
and now find flash_all.bat file in the folder where you extracted all files and run as admin. let the process finish you would be back at stock firmware with no boot loops.
if you don't want to go to factory image then
method 2
boot your phone in fastboot and type
fastboot -i 0x1ebf oem lock (to lock your bootloader)
fastboot -i 0x1ebf oem unlock (to unlock your boot loader) as you used yuware or something that might created problem in bootloader so follow both.
fastboot -i 0x1ebf flash recovery name_of_recovery.img
and let it flash recovery then boot into recovery go to advance wipe format data type yes and swipe, install any custom rom and flash gapps done.
if you face still boot loops follow method 1 and flash roms later.
P.s while in fast-boot remove sim cards and memory cards from your phone and then run any commands.
and while flashing any roms please do remove sim cards.
Click to expand...
Click to collapse
Need custom recovery
TWRP 3.0.2 not supported by YU5510A
sadique2804 said:
Need custom recovery
TWRP 3.0.2 not supported by YU5510A
Click to expand...
Click to collapse
TWRP is custom recovery itself, using it on my device since year, works fine you might have flashed wrong twrp. Try rom the link provided and remove every thing from phone before flashing twrp.
Bhavesh_khatri said:
TWRP is custom recovery itself, using it on my device since year, works fine you might have flashed wrong twrp. Try rom the link provided and remove every thing from phone before flashing twrp.
Click to expand...
Click to collapse
I know TWRP is custom recovery
But in my phone (YU5510A, Stock Android 4.4.4) it is not supported.
Whenever I am trying to install, it corrupt the recovery and the firmware of my phone.
After installing TWRP 3.0.2.0 (downloaded from official website under tomato section) my phone cant boot, it stuck on YU logo.
If you have the link please share.
sadique2804 said:
I know TWRP is custom recovery
But in my phone (YU5510A, Stock Android 4.4.4) it is not supported.
Whenever I am trying to install, it corrupt the recovery and the firmware of my phone.
After installing TWRP 3.0.2.0 (downloaded from official website under tomato section) my phone cant boot, it stuck on YU logo.
If you have the link please share.
Click to expand...
Click to collapse
Like i said your device is soft bricked try methods i suggested, but recovery should work fine press vol up+ vol down+power button to boot into recovery you would be able to use TWRP. if not try to flash recovery again as i said yuware might have introduced some bugs install as i suggested. your device stuck at boot loop has nothing to do with recovery not working.
---------- Post added at 08:03 PM ---------- Previous post was at 07:50 PM ----------
Try to flash older versions here is 2.8.4.0 if you on kit-kat or any,
https://dl.twrp.me/tomato/twrp-2.8.4.0-tomato.img
https://dl.twrp.me/tomato/twrp-2.8.5.0-tomato.img
https://dl.twrp.me/tomato/twrp-2.8.6.0-tomato.img
type
fastboot -i 0x1ebf flash recovery twrp-2.8.4.0-tomato.img
remove simcards and memory cards while flashing. hope this helps.
I flashed cm12.1 officially signed, and it worked and i recovered my device, but i want to flashed custom rom and it needs a custom recovery.
That's the problem, and I tried 2.8.7 and 2.8.6 and 2.8.5.
Currently I am on official cm12.1 with cm recovery.
I m also facing same problem.
---------- Post added at 08:26 PM ---------- Previous post was at 08:26 PM ----------
sadique2804 said:
I flashed cm12.1 officially signed, and it worked and i recovered my device, but i want to flashed custom rom and it needs a custom recovery.
That's the problem, and I tried 2.8.7 and 2.8.6 and 2.8.5.
Currently I am on official cm12.1 with cm recovery.
Click to expand...
Click to collapse
Your problem solved bro?
sadique2804 said:
I know TWRP is custom recovery
But in my phone (YU5510A, Stock Android 4.4.4) it is not supported.
Whenever I am trying to install, it corrupt the recovery and the firmware of my phone.
After installing TWRP 3.0.2.0 (downloaded from official website under tomato section) my phone cant boot, it stuck on YU logo.
If you have the link please share.
Click to expand...
Click to collapse
TRY TO UNLOCK BOOTLOADER FIRST.
Twrp won't install properly if the bootloader is locked.
IF THIS HELPS CLICK THANKS :good:
Hangs twrp
My phone got hanged at twrp yureka plus yu5510A stock lollipop plz help
ray pember said:
My phone got hanged at twrp yureka plus yu5510A stock lollipop plz help
Click to expand...
Click to collapse
Flash latest version of twrp using adb
Here is the link
https://dl.twrp.me/tomato/twrp-3.1.1-0-tomato.img.html
My device 5510a I install twrp but touch not working properly so plz help me....next what I do
sadique2804 said:
Hello,
I need help about my yureka plus on android (YU5510A),
I bought yureka plus yesterday and it comes on stock android 4.4.4 (Kitkat), I try to install custom rom and connect my phone to my laptop with help of YUWARE and try to unlock the bootloader in fastboot mode, it shows the successful message, but phone cant restart, I restart it manually, but it stuck on Yureka logo, trying again for flashing TWRP, same thing happen.
My phone (YU5510A) stuck on yureka plus logo.
So please help me.
Best Regards
Sadique A
Click to expand...
Click to collapse
hello for yureka i have some files I hope u don't try fastboot cause yureka have limited rom memory i have some files i encountered the worst case . i went to local vendor he did it for 3dollar. nd yes i read some yureka have a different board in the differnet country so files are bit messed up feel free to message i have somefiles try the luck or better search other thread developers are not doing a lot nowadays i was trying ubuntu but somehow sad life
Hii I have yu yureka plus (yu5510a) the phone is starting and stuck at YU logo after that blue screen appears and phone can't go ahead .
And When i connect the phone with pc it can't detected and an error shows in phone that "do not disconnect the data cable" & in bottom left "your phone is not secure" please help
I am no noob and have always flashed factory images and rooted phone, for years.
For the very first time today I am having a problem.
I had 7.1.2 with unlocked bootloader, twrp installed and root.
Decided to install DP3, so I first made a twrp backup and then successfully installed DP3.
Since I was having problems, I decided to restore backup from twrp> from here only problems.
Backup restored successfully but phone wouldn't boot: stuck at boot logo with 4 coloured circles spinning. Waited minutes to no avail.
Tried then everything I could: flash manually with fastboot, resetting phone from recovery, relocking bootloader, flashing again latest 7.1.2 factory images manually piece by piece with fastboot> all to no avail. Phone can boot into bootloader and into original recovery, but when I try to boot it is stuck at four spinning coloured circles. I can hear every few seconds a short vibration, but it won't boot.
Any help please?
Thanks.
The restored backup didn't have something it needed prob. Like maybe vendor. Had to be something you missed
thegios said:
I am no noob and have always flashed factory images and rooted phone, for years.
For the very first time today I am having a problem.
I had 7.1.2 with unlocked bootloader, twrp installed and root.
Decided to install DP3, so I first made a twrp backup and then successfully installed DP3.
Since I was having problems, I decided to restore backup from twrp> from here only problems.
Backup restored successfully but phone wouldn't boot: stuck at boot logo with 4 coloured circles spinning. Waited minutes to no avail.
Tried then everything I could: flash manually with fastboot, resetting phone from recovery, relocking bootloader, flashing again latest 7.1.2 factory images manually piece by piece with fastboot> all to no avail. Phone can boot into bootloader and into original recovery, but when I try to boot it is stuck at four spinning coloured circles. I can hear every few seconds a short vibration, but it won't boot.
Any help please?
Thanks.
Click to expand...
Click to collapse
Format your data through CMD, then flash a different stock
Sent from my Pixel XL using Tapatalk
bennyboy2120 said:
Format your data through CMD, then flash a different stock
Sent from my Pixel XL using Tapatalk
Click to expand...
Click to collapse
been trying this several times to no avail... unless I am doing it in the wrong way
fastboot flash bootloader C:\angler\bootloader-angler-angler-03.69.img
fastboot reboot-bootloader
fastboot flash radio C:\angler\radio-angler-angler-03.81.img
fastboot reboot-bootloader
fastboot flash boot C:\angler\boot.img
fastboot flash system C:\angler\system.img
fastboot flash vendor C:\angler\vendor.img
fastboot flash recovery C:\angler\recovery.img
fastboot reboot
Select "Recovery" using the volume buttons.
When a small Android appears, press Power Button + Volume UP.
Select "Wipe data/factory data reset"
Problem now is that when I go to recovery the green android keeps on flashing and it does not go into recovery mode
Bro u flashed stock recovery..right?
Sent from my Nexus 6P using Tapatalk
---------- Post added at 03:26 AM ---------- Previous post was at 03:24 AM ----------
That's y u have the android..You flashed over twrp
Sent from my Nexus 6P using Tapatalk
---------- Post added at 03:28 AM ---------- Previous post was at 03:26 AM ----------
I always use wugs tool when messing up and it at least can get u back to stock..Then it can flash twrp and su to root..Then download your ROM and backup the stock in twrp for safety and boom your back to were u started ...
Sent from my Nexus 6P using Tapatalk
---------- Post added at 03:29 AM ---------- Previous post was at 03:28 AM ----------
That way you don't have to manually do it ...I always seem to misspell or screw up for some reason doing it myself...
Sent from my Nexus 6P using Tapatalk
kenbrownstone said:
Bro u flashed stock recovery..right?
Sent from my Nexus 6P using Tapatalk
---------- Post added at 03:26 AM ---------- Previous post was at 03:24 AM ----------
That's y u have the android..You flashed over twrp
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
no no sorry, forgot to mention that by recovery.img I meant TWRP.
so now I have twrp installed, I can boot to bootloader and to recovery (twrp) correctly, I can issue fastboot and adb commands, yet when trying to flash any stock image by following steps above, at reboot phone is stuck at the 4 spinning circles...
I have even tried to delete EFS partition with
ADB shell dd if=/dev/zero of=/dev/block/platform/soc.0/f9824900.sdhci/by-name/modemst1 bs=16384
and
ADB shell dd if=/dev/zero of=/dev/block/platform/soc.0/f9824900.sdhci/by-name/modemst2 bs=16384
but still stuck at boot
You have a efs backup somewhere righy
Sent from my Nexus 6P using Tapatalk
Tried wugs tool as well, but it did not work... maybe i did the wrong thing?
Flash cache and user data img..that should do I t but will wipe your phone I believe...At least do cache it worked for me ..User data IMG did too but that wipes phone
.I'm totally praying you had a efs backup to restore
Sent from my Nexus 6P using Tapatalk
kenbrownstone said:
Flash cache and user data img..that should do I t but will wipe your phone I believe...At least do cache it worked for me ..User data IMG did too but that wipes phone
.I'm totally praying you had a efs backup to restore
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
No I have no efs backup, but maybe I tried to restore using a bugged twrp version and it got corrupted so I used twrp suggestion to erase it.
Well I have downloaded latest factory image and the only images found are
fastboot flash bootloader C:\angler\bootloader-angler-angler-xx.xx.img
fastboot reboot-bootloader
fastboot flash radio C:\angler\radio-angler-angler-xx.xx.img
fastboot reboot-bootloader
fastboot flash boot C:\angler\boot.img
fastboot flash system C:\angler\system.img
fastboot flash vendor C:\angler\vendor.img
no cache and no user data
I dont care loosing data, I have a backup of docs and pics
woah I did it!!!!!!!!!!!!!!!!!!
pretty sure it was the efs corrupted
thanks anyway for the support
Just get wugfresh toolkit and do it that easy way. It'll do everything for you just follow the prompt, There's a part for flashing on a bootlooped device it will correct all the errors for you
Hello. I may have bricked my phone trying to install TWRP. I must have failed in installing because it only bootloops now. I cant boot into OS and also recovery. I can only boot into fastboot mode. I tried flashing recovery.img but still cannot boot into recovery. pls send help T.T
Os version is oreo and in the feb security patch
also i tried typing "fastboot erase cache" and "fastboot erase userdata" to wipe but nothing happened. What can i do
Aarawrn said:
Hello. I may have bricked my phone trying to install TWRP. I must have failed in installing because it only bootloops now. I cant boot into OS and also recovery. I can only boot into fastboot mode. I tried flashing recovery.img but still cannot boot into recovery. pls send help T.T
Os version is oreo and in the feb security patch
also i tried typing "fastboot erase cache" and "fastboot erase userdata" to wipe but nothing happened. What can i do
Click to expand...
Click to collapse
1) Download Oreo RAW for ZenFone 3:
ZE520KL: https://drive.google.com/drive/folders/1-cPPsOKlhHqdqAtYTAaSeaHfcTXReTmW
ZE552KL: https://drive.google.com/drive/folders/1sDO09vDONlHcuadd8W9kfXe07syuo0Tw
2) Download ASUS Flash Tool
https://drive.google.com/drive/folders/1Zmc9L0tPbSMSkzHfmSAA_0AxzTRZffP6
3) Enter Fastboot Mode on your device.
4) Open ASUS Flash Tool and select your device.
5) Connect your phone to your PC & your serial number will pop out on AFT.
6) Select the RAW firmware & flash (wait 10- 15 mins) [You'll get error 5 (ignore it)]
Your phone is now fixed
---------- Post added at 10:59 AM ---------- Previous post was at 10:57 AM ----------
Aarawrn said:
Hello. I may have bricked my phone trying to install TWRP. I must have failed in installing because it only bootloops now. I cant boot into OS and also recovery. I can only boot into fastboot mode. I tried flashing recovery.img but still cannot boot into recovery. pls send help T.T
Os version is oreo and in the feb security patch
also i tried typing "fastboot erase cache" and "fastboot erase userdata" to wipe but nothing happened. What can i do
Click to expand...
Click to collapse
If you want to use TWRP on stock ROM, please FLASH Magisk.
Without flashing Magisk, your device will bootloop (same case as yours)
Saktis_STi said:
1) Download Oreo RAW for ZenFone 3:
ZE520KL: https://drive.google.com/drive/folders/1-cPPsOKlhHqdqAtYTAaSeaHfcTXReTmW
ZE552KL: https://drive.google.com/drive/folders/1sDO09vDONlHcuadd8W9kfXe07syuo0Tw
2) Download ASUS Flash Tool
https://drive.google.com/drive/folders/1Zmc9L0tPbSMSkzHfmSAA_0AxzTRZffP6
3) Enter Fastboot Mode on your device.
4) Open ASUS Flash Tool and select your device.
5) Connect your phone to your PC & your serial number will pop out on AFT.
6) Select the RAW firmware & flash (wait 10- 15 mins) [You'll get error 5 (ignore it)]
Your phone is now fixed
---------- Post added at 10:59 AM ---------- Previous post was at 10:57 AM ----------
If you want to use TWRP on stock ROM, please FLASH Magisk.
Without flashing Magisk, your device will bootloop (same case as yours)
Click to expand...
Click to collapse
still no recovery,any other fix please?this my only phone,please help
herumukti9901 said:
still no recovery,any other fix please?this my only phone,please help
Click to expand...
Click to collapse
at what stages do you have problems? did you manage to launch to system?
make screenshots or provide additional info, please.
I've restored my phone with different RAW (service) firmwares (oreo, nougat, marshmellow) installed magisk (on everyone) and even managed to launch orangefox recovery for our model.
TrickyJoe said:
at what stages do you have problems? did you manage to launch to system?
make screenshots or provide additional info, please.
I've restored my phone with different RAW (service) firmwares (oreo, nougat, marshmellow) installed magisk (on everyone) and even managed to launch orangefox recovery for our model.
Click to expand...
Click to collapse
recovery succes to install in cmd,,but not start (just blackscreen) in PC 9008 diagmode
Hi
The phone does not turn on in any way. Recovery mode does not turn on.
Stock recovery won't open, I'm flashing TWRP and it gets stuck on TWRP logo. Bootloader and FRP is unlock.
Fastboot mod is working. No matter what I do, the phone didn't boot up normally in recovery mode or not. Please help me.
I've tried multiple versions of TWRP none of them turned on. Erecovery mod won't turn on
enes.korogluu said:
I've tried multiple versions of TWRP none of them turned on. Erecovery mod won't turn on
Click to expand...
Click to collapse
Hey man I have the exact same problem right now, were you able to fix this? for me i tried flashing some stock rom imgs via flashboot but that didnt help either. Hope you found out about something
---------- Post added at 09:24 AM ---------- Previous post was at 09:15 AM ----------
small update: https://forum.xda-developers.com/huawei-p-smart/help/unable-to-enter-twrp-stock-recovery-t4126357 use what it says there, i can open twrp again now
Enter fastboot mode and type the following commands "fastboot erase system" and "fastboot erase userdata" I solved the problem in this way.