Database Users

help needed to get twrp installed

I have a Redmi Note 1GB ram, 2 sims ( model HM NOTE 1S CT ) running ANDROID 4.4.4 MIUI 8.6.7.28 beta.
I'm trying to install TWRP onto it but keep getting the same error as shown below:
C:\Users\david\Desktop\wt86047-TWRP3.0.2-0_LP\adb>fastboot erase recovery
erasing 'recovery'...
OKAY [ 0.078s]
finished. total time: 0.078s
C:\Users\david\Desktop\wt86047-TWRP3.0.2-0_LP\adb>fastboot flash recovery twrp.img
target reported max download size of 268435456 bytes
sending 'recovery' (13408 KB)...
OKAY [ 0.426s]
writing 'recovery'...
OKAY [ 0.563s]
finished. total time: 0.989s
C:\Users\david\Desktop\wt86047-TWRP3.0.2-0_LP\adb>fastboot boot twrp.img
downloading 'boot.img'...
OKAY [ 0.425s]
booting...
FAILED (remote: dtb not found)
finished. total time: 0.534s
I've tried many different twrp versions but always the same error. Anyone help ?

Why you need to flash twrp.img to boot? When I did this part, it was done already.
C:\Users\david\Desktop\wt86047-TWRP3.0.2-0_LP\adb>fastboot flash recovery twrp.img
target reported max download size of 268435456 bytes
sending 'recovery' (13408 KB)...
OKAY [ 0.426s]
writing 'recovery'...
OKAY [ 0.563s]
finished. total time: 0.989s
Click to expand...
Click to collapse

That,s just to check it. It should reboot the phone into twrp, but standard recovery is still there.
Even if I try to boot into twrp using the volume down/power button, standard recovery comes up.

Can anyone help ?

blankers said:
Can anyone help ?
Click to expand...
Click to collapse
What ROM are you on? If you are on a Custom ROM already, you can try to use TWRP manager to install.
Another option would be you flash another recovery, like PhilzTouch, and then a Custom ROM, then TWRP manager...

the 2nd command should work "fastboot flash recovery twrp.img"
in my case.its always working.i already try many times
1.flash stock miui rom using MIUI flash tool
2. flash twrp using fastboot "fastboot flash recovery twrp.img"
3. reboot
note : after flashing twp you need to execute "fastboot reboot" and miui/custom rom should boot normally
then reboot to recovery
i used twrp3.0.2

how did u root nougat b15?

I tried flashing super su 2.79SR3 and it bootloops.

Nik2424 said:
I tried flashing super su 2.79SR3 and it bootloops.
Click to expand...
Click to collapse
2.79 stable

it is working. it might be cause 2 - 3 times bootlops

I have an unlocked BL and recently upgraded to Nougat, but when I try to reinstall TWRP via fastboot flash method, it fails. I have tried two different versions of TWRP 3.0.3-1 & 3.0.4-1. This is the message I get.
PS C:\adb> fastboot flash recovery twrp-3.0.4-1-a7.img
target reported max download size of 536870912 bytes
sending 'recovery' (14472 KB)...
OKAY [ 0.332s]
writing 'recovery'...
FAILED (remote: unknown command)
finished. total time: 0.363s
Any ideas?

Here, from here.
Looks like people are having success.

Cannot remove encryption, tried everything I can think of... Advice?

So I'm in a bit of a pickle regarding the encryption on my OP2. The problem is this, I rooted and installed a custom rom which I went on to encrypt using androids native encryption. I've since this installed a new rom but the encryption is still active when booting to recovery and my lock screen pin is required to get the phone to start, even when its a fresh rom install and full data wipe? I've eve tried replacing the recovery to the latest version of twrp through adb but just get the following:
"C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash recovery twrp.img
target reported max download size of 536870912 bytes
sending 'recovery' (22032 KB)...
OKAY [ 0.576s]
writing 'recovery'...
FAILED (remote: device is locked. Cannot flash images)
finished. total time: 0.600s"
Any thoughts?

Unlock bootloader
Sent from my ONE A2005 using Tapatalk

Brick. Goes directly to eRecovery

I flashed LineageOS OpenKirin than I flashed AOSP meliticoulous and i got bricked. I tried to do the 3 buttons and dload folder method and fastboot flashing system, recovery and boot from upadte.apk. Than i finded that i need to change oeminfo. I changed it and after restart my phone shows only huawei logo and goes to eRecovery. It doesnt show unlocked bootloader screen. I also cant install recovery via fastboot
PS C:\Users\User\Documents> fastboot flash recovery twrp-3.1.1-0-venus.img
target reported max download size of 471859200 bytes
sending 'recovery' (24464 KB)...
OKAY [ 0.875s]
writing 'recovery'...
FAILED (remote: Command not allowed)
finished. total time: 0.891s
PS C:\Users\User\Documents>
I don't know what to do. Please help me
EDIT
I flashed L21C432oemInfo-DS.zip than update.app but when i press 3 buttons on 5% i get message Software install failed

[ADB & FASTBOOT] Problem with flashing TWRP FAILED (remote: Command not allowed)

Hi Guys! After brick, my p9l have red "menu" at start and text "Failed verificatnion" or smth like this.
I can't flash TWRP because of FAILED (remote: Command not allowed).
Bootloader & FRP unlocked.
Adb isn't working at bootloader, only fastboot is working.
I want to rollback to 6.0. I have dload with file on my sdcard but i can't flash oeminfo without twrp.
How to fix it?
Code:
E:\tele\SRKToolHuawei-STABLE-V1.3-20160619>FASTBOOT flash recovery EliteTWRP.img
target reported max download size of 471859200 bytes
sending 'recovery' (24452 KB)...
OKAY [ 0.618s]
writing 'recovery'...
FAILED (remote: Command not allowed)
finished. total time: 0.632s
I want to say sorry for my english :/

Try to flash TWRP with P9 lite toolkit