Hi all.
I have successfully flashed PsychoGame's CyanogenMod 7 ROM for GT-s5360 together with its kernel.
Now i would like to make some changes in the source code of CM7 and to build it from source. Unfortunately i have spent already 4 days without success.
Those are the steps that i did:
1. I have downloaded CM7 source code from git://github.com/CyanogenMod/android.git -b gingerbread
2. I have cloned PsychoGame's totoro device code into /devices/samsubg/totoro
3. i have connected my device via USB and run the script extract-files.sh which successfully extracted all files.
4. during the building i realized that the above script extract all essential files (like camera related), so i cloned PsychoGame's vendor directory from github.com/PsychoGame/android_vendor_samsung_totoro.git
5. now i realized that the file cyanogem_totoro.mk in the directory vendor/cyanogen/products is missing. where i can find a suitable file?
i have found somewhere such file and succeeded to build an ROM, unfortunately CWM does't let me to flash it because the assert command checks that the current device in "totoro" but it fails. i have tried to open the zip file of the ROM and to delete the assert command but CWM still can''t flash the new ROM.
can somebody please help me with some guild about how PsychoGame built his last vertion of CM - CyanogenMod 7 Alpha 5 Release
Thank you very much!
Use percys source code - It has more fixes
Compare build.prop and update binary & scripts for cwm flashing
marcussmith2626 said:
Use percys source code - It has more fixes
Compare build.prop and update binary & scripts for cwm flashing
Click to expand...
Click to collapse
Hi, thank you for the information about gigngerDX. i found the github of the device but can you please tell me where to find all other files to build this rom? do i need to buld it without the kernel? how to do that?
thank you again!
yuripo said:
Hi, thank you for the information about gigngerDX. i found the github of the device but can you please tell me where to find all other files to build this rom? do i need to buld it without the kernel? how to do that?
thank you again!
Click to expand...
Click to collapse
Percys github is
https://github.com/percy-g2
I haven’t compiled a Cyanogen rom before
If you would like to contribute to the building of Cyanogen roms the best person to talk to is percy
I haven’t compiled a Cyanogen rom before
If you would like to contribute to the building of Cyanogen roms the best person to talk to is percy[/QUOTE]
can please somebody explain how to build only Percys ROM without the kernel?
thank you
Hi all.
Can somebody please give a small guide for how to build percy's CM7 ROM from source?
which directories in the CM7 i should replace? does the process of building is the same as with official ports?
Thank you!
Hello together,
I hope someone maybe can help me out. In the past I comiled the standard CM11 kernel by myself. I just add a few minor tweaks for my display color calibration and so on. Nothing special.
Since CM11 I'm always stuck in a bootloop after the "Google" logo. Even if I try only the stock CM11 kernel without any changes. Same toolchain (4.7) and so on. Why is that the case?!
I hope someone, maybe from all the experiencened kernel creators here, can give me a hint where's my problem? Is it maybe something with all the SELinux stuff? It was also the case in CM10.2 if I tried to comile with modules enabled.
Help here would be very appreciated. Thanks in advance.
Regards, Fred
OK, I answer this question myself. Just found out you have to compile the kernel inline with cyanogenmod. Sync the whole repo, initialize your device, make the changes to the kernel and compile it with make bootimage. This way I also have no need to use Anykernel script anymore.
Hello guys,
My kernel ( KTmanta) is compiled by myselif suing a a15 optimized toolchain. Boots, working nice, however, any build with 4.8, 4.9, will stay at loading screen forever.
Any one can help me out , or might know the source of the problem?? I used once adb bugreport but haven't found interessting stuff(or at least I think)
Thank you.
Suggestion: have you tried building the kernel with another (prebuilt) toolchain, that includes GCC 4.8, 4.9? Maybe you missed something?
Search in forum "JustArchi's ArchiDroid Optimizations" (sorry, I cannot post links).
In that thread there are some patches for fix not booting kernel with gcc 4.8.
I'm here to question the device owner. There are few sources around about this device. They are raw and they are as common always experimental. Does anyone need them?
Furthermore, I can sum up here any sources I or other get to find about this device or its periphery.
If you are eager to Void your Warranty please Mind and Acknowledge that every modification only affects you and your contract and noone else.
custom rom
http://forum.xda-developers.com/xperia-xa/development/f3112-f3116-cyanogemod-13-project-t3488890
Silversniper said:
I'm here to question the device owner. There are few sources around about this device. They are raw and they are as common always experimental. Does anyone need them?
Furthermore, I can sum up here any sources I or other get to find about this device or its periphery.
Click to expand...
Click to collapse
Very good thing, I'm trying to build a CM13 rom from sources and I'm not sure if I have all required sources. For now I have, kernel sources with some "vendor" files from Sony and I found all build parameters like offsets/adresses and correct cmdline (no thanks to Sony because never released or mentioned them), the device tree dumped from my device, and I will dump the vendor tree too.
Now I need the defconfig for CM (very not sure if the stock one will work) , and some files like the boardconfig and some config files. I'm using the Elephone P9000 sources for sample, almost the same device (hardware side) and source files.
If I have some time I will try to upload files to git but I never tried before (sync only)...
rrvuhpg said:
Very good thing, I'm trying to build a CM13 rom from sources and I'm not sure if I have all required sources. For now I have, kernel sources with some "vendor" files from Sony and I found all build parameters like offsets/adresses and correct cmdline (no thanks to Sony because never released or mentioned them), the device tree dumped from my device, and I will dump the vendor tree too.
Now I need the defconfig for CM (very not sure if the stock one will work) , and some files like the boardconfig and some config files. I'm using the Elephone P9000 sources for sample, almost the same device (hardware side) and source files.
If I have some time I will try to upload files to git but I never tried before (sync only)...
Click to expand...
Click to collapse
Don't need to hesitate. I'll try to put the directions I've gathered here up today so it is done.
I finished to upload my files to Github:
https://github.com/rrvuhpg
You will find the device, kernel and vendor files to build CM13 for F3112/F3116. For now it will not work, it's just to share and help. I successfully built and booted the Cyanogen recovery with the kernel from sources, the doors for porting new roms are open?? :fingers-crossed:
My next step is to finish the device tree, verify the vendor tree and build the rom
rrvuhpg said:
I finished to upload my files to Github:
https://github.com/rrvuhpg
You will find the device, kernel and vendor files to build CM13 for F3112/F3116. For now it will not work, it's just to share and help. I successfully built and booted the Cyanogen recovery with the kernel from sources, the doors for porting new roms are open?? :fingers-crossed:
My next step is to finish the device tree, verify the vendor tree and build the rom
Click to expand...
Click to collapse
cool.. if work I would like to have it on my f3111 !!
rrvuhpg said:
I finished to upload my files to Github:
https://github.com/rrvuhpg
You will find the device, kernel and vendor files to build CM13 for F3112/F3116. For now it will not work, it's just to share and help. I successfully built and booted the Cyanogen recovery with the kernel from sources, the doors for porting new roms are open?? :fingers-crossed:
My next step is to finish the device tree, verify the vendor tree and build the rom
Click to expand...
Click to collapse
Can you publish some brief preview?
Need to say the sources I had just seem to be down, so can't share them.
Through which Program are these to flash? If you're that far I can hold a look at it and may join in your development.
Verification of the Vendor Files is something I was not very good at it, not even a yolk I managed.
Silversniper said:
Can you publish some brief preview?
Need to say the sources I had just seem to be down, so can't share them.
Through which Program are these to flash? If you're that far I can hold a look at it and may join in your development.
Verification of the Vendor Files is something I was not very good at it, not even a yolk I managed.
Click to expand...
Click to collapse
For now the only preview I can publish are the CM13 boot and recovery "as is", I'm not sure if it can help but I will release them if someone want to port others MTK Roms on XA. ( Never booted any ported rom with the stock kernel, stuck at Sony logo)
Flashing is easy: the recovery with fastboot and Rom/boot in a single flashable zip on the SD.
The kernel sources are coming from 33.2.B.2.95 open source archive from Sony but built from the lastest CM13 and Google git sources.
The vendor tree from 33.2.B.2.93 dumped from my phone, only common files with the P9000 are on my git for now.
The device tree from P9000 sources (from @Deepflex git) but seem OK.
CM13 have Android 6.0.1, I don't know if the security patch is the last one but August for sure.
I'm not so far from a finished build (not mean fully bootable), for now I successfully build a full CM13 for the Elephone P9000 (the twin of the XA, I'm using it as base). It mean my "kitchen" is working Now I'm trying to identify the last proprietary files from all others stock/cm13 libs, modify make files and cross my fingers it will fully build without errors.
You can join me no problem all people are welcome because I can't do all alone
rrvuhpg said:
For now the only preview I can publish are the CM13 boot and recovery "as is", I'm not sure if it can help but I will release them if someone want to port others MTK Roms on XA. ( Never booted any ported rom with the stock kernel, stuck at Sony logo)
Flashing is easy: the recovery with fastboot and Rom/boot in a single flashable zip on the SD.
The kernel sources are coming from 33.2.B.2.95 open source archive from Sony but built from the lastest CM13 and Google git sources.
The vendor tree from 33.2.B.2.93 dumped from my phone, only common files with the P9000 are on my git for now.
The device tree from P9000 sources (from @Deepflex git) but seem OK.
CM13 have Android 6.0.1, I don't know if the security patch is the last one but August for sure.
I'm not so far from a finished build (not mean fully bootable), for now I successfully build a full CM13 for the Elephone P9000 (the twin of the XA, I'm using it as base). It mean my "kitchen" is working Now I'm trying to identify the last proprietary files from all others stock/cm13 libs, modify make files and cross my fingers it will fully build without errors.
You can join me no problem all people are welcome because I can't do all alone
Click to expand...
Click to collapse
good work , but I am noob to create rom with kitchen .. only zip edit I know
Yesterday I successfully built CM13 for XA from sources
But news are not good, the CM recovery is fully working as expected but the rom is stuck just after the Sony logo (Mediatek screen with "loading...") like on my previous attempts to port other roms. The kernel built from CM kitchen do the same... I will upload my git and my rom to see if someone have an idea on the problem. Now I will focus on the "vendor" files, but I'm not sure if it's the real problem. Can it be a locked preloader/kernel or something like that?
EDIT: I think the boot problem is related to the defconfig file from Sony kernel sources, I will try to change some settings. (the door for adding kernel features :good
rrvuhpg said:
Yesterday I successfully built CM13 for XA from sources
But news are not good, the CM recovery is fully working as expected but the rom is stuck just after the Sony logo (Mediatek screen with "loading...") like on my previous attempts to port other roms. The kernel built from CM kitchen do the same... I will upload my git and my rom to see if someone have an idea on the problem. Now I will focus on the "vendor" files, but I'm not sure if it's the real problem. Can it be a locked preloader/kernel or something like that?
EDIT: I think the boot problem is related to the defconfig file from Sony kernel sources, I will try to change some settings. (the door for adding kernel features :good
Click to expand...
Click to collapse
Love you!
I will buy this phone thanks to you :highfive:
Thank you for your work on our phone, it's very cool.
I would have helped if i could develop myself. If you need help get in touch with me i know some great devs who could maybe help you
any news @rrvuhpg ?
Yes I have some news but I want to create a dedicated thread for the CM13 project with updates, explanations and downloads to avoid off topic here. I am on holiday on next week and I will have time to work on it and give explanations. For now I'm stuck on boot because of Sony extra settings in the boot process, it's the first time I see a bootstrap and TA partition mount on a MTK device. If you know a dev for helping me passing the Sony part in the boot init it can be great :angel:
Other thing, I updated my git with parts of the update made by @Deepflex on the P9000 sources and my recent changes.
rrvuhpg said:
Yes I have some news but I want to create a dedicated thread for the CM13 project with updates, explanations and downloads to avoid off topic here. I am on holiday on next week and I will have time to work on it and give explanations. For now I'm stuck on boot because of Sony extra settings in the boot process, it's the first time I see a bootstrap and TA partition mount on a MTK device. If you know a dev for helping me passing the Sony part in the boot init it can be great :angel:
Other thing, I updated my git with parts of the update made by @Deepflex on the P9000 sources and my recent changes.
Click to expand...
Click to collapse
sorry first time I use sony ... I wish you to have nice holiday !
Hi all,
I like to try tweaking and hacking my phone. I've tried some ROMs on my kugo for some time, but I figured I wanted to make my own personalized build. Right now, I'd like to use the 'Night Light' app from F-Droid, which requires KCAL support. In order to enable KCAL I'd need to edit the stock kernel (I know this can be done, it was the case for Genesis Kernel on Nougat).
Hence I'd want to learn to compile a kernel, but I can't get to the end of Sony's tutorial. I've downloaded the kernel source but I am totally lost with defconfig files. How should I configure the kernel ? There is no obvious choice for a defconfig, and I can't get past point #6 in the tutorial..
Given that I've just discovered kernel compilation today, would someone be kind and take some time to maybe point me to useful doc, give me a clue as to what my next step could be, or teach me how they compile kernels for their device ?
Many thanks for any help,
Cheers
TLDR. How to compile a kernel? I have Sony's source for kugo, but don't understand how to configure the kernel compilation.