[Urgent] Bootloader for Galaxy A7 SM-A700FD - Galaxy A3, A5, A7, A8, A9 Q&A, Help & Troubleshoot

Hello fellow XDAins...
I am in deep trouble. I was using my friend's A7 and it fell out of my hands. When I tried to switch it on after that it shows A7 logo and a vibration and restarts and repeats the same continuosly. Cannot even turn off the phone. Can't get into recovery mode. But Can access download mode. Flashed Stock ROM. But the result is same. What should I Do. I tried to find bootloader file for A7 but couldn't find one... Please help brothers.... or could it be hardware problem?

lonwulf said:
Hello fellow XDAins...
I tried to find bootloader file for A7 but couldn't find one... Please help brothers.... or could it be hardware problem?
Click to expand...
Click to collapse
Bootloader file already exists inside your stock firmware (boot.img inside stock*.MD5. Maybe your hardware problem !

huynhlam said:
Bootloader file already exists inside your stock firmware (boot.img inside stock*.MD5. Maybe your hardware problem !
Click to expand...
Click to collapse
That's not the bootloader that is the kernel.

Same problem here, any luck?

Related

[Q] brick lenovo s2110 QHsusb-d load

Hi, I was trying to install cwm recovery from rom manager the tablet has rebooted and you are no longer on again, if I connect it to my pc is recognized as QHsusb load-d .. there is a way to bring it back to life? thanks
same problem
Just ran into the same problem running LagFix from the play store. :crying:
In principle, we would have to flash a new boot.img, but AFAIK that's impossible. On Monday I'm going to call and see if I can RMA it.
For anyone else who stumbles on this thread: DON'T RUN LAGFIX!
UPDATE 4/6 I sent it in to Lenovo. It's due back on Monday.
enproceso94 said:
Hi, I was trying to install cwm recovery from rom manager the tablet has rebooted and you are no longer on again, if I connect it to my pc is recognized as QHsusb load-d .. there is a way to bring it back to life? thanks
Click to expand...
Click to collapse
In case you still need it...here's my solution
http://forum.xda-developers.com/showthread.php?t=2603726
s2110a firmware lenovo
dev>null said:
In case you still need it...here's my solution
http://forum.xda-developers.com/showthread.php?t=2603726
Click to expand...
Click to collapse
guys I need the original firmware lenovo s2110a I need to revive the tablet with riff jtag
@enproceso94 Hi! Here's the link: inside the Lenovo.ru forum !
Good luck!

[Q][L5 II] [E460] Fix touchscreen after bad flash

Hello, my friend tried to flash his E460 because his firmware was SIM locked but he used a wrong firmware and now the touchscreen and the 3 buttons on the bottom don't work.
I used LGMobile Support Tool and did an upgrade recovery, but the touchscreen still doesn't work.
Anyone have any solution? Thanks.
ptrVoid said:
Hello, my friend tried to flash his E460 because his firmware was SIM locked but he used a wrong firmware and now the touchscreen and the 3 buttons on the bottom don't work.
I used LGMobile Support Tool and did an upgrade recovery, but the touchscreen still doesn't work.
Anyone have any solution? Thanks.
Click to expand...
Click to collapse
you will be able to use kdz updater in attached link LG-RDTT_1.0.5.4 (needs included windows enabler for this version)
use THIS GUIDE to flash just skip the hosts file editing steps
and let us know
IGGYVIP said:
you will be able to use kdz updater in attached link LG-RDTT_1.0.5.4 (needs included windows enabler for this version)
use THIS GUIDE to flash just skip the hosts file editing steps
and let us know
Click to expand...
Click to collapse
I used this tutorial and successfully flashed the phone but the touchscreen still doesn't work. What should I do? Thanks.
maybe screen damaged by bad flash
ptrVoid said:
I used this tutorial and successfully flashed the phone but the touchscreen still doesn't work. What should I do? Thanks.
Click to expand...
Click to collapse
did buttons start working ?
did you flash kernel and/or recovery onto phone before ? <<<---that might have damaged hardware
did you open your phone at any time ?
IGGYVIP said:
did buttons start working ?
did you flash kernel and/or recovery onto phone before ? <<<---that might have damaged hardware
did you open your phone at any time ?
Click to expand...
Click to collapse
My friend tried to flash it and he used a wrong firmware for E455 instead of E460.
I don't think he did anything else because it doesn't have a custom recovery installed.
The buttons and touchscreen still don't work.
I think somehow the wrong firmware installed incorrect drivers for the touchscreen or something, but I thought the drivers are stored inside the ROM?
burn it
ptrVoid said:
My friend tried to flash it and he used a wrong firmware for E455 instead of E460.
I don't think he did anything else because it doesn't have a custom recovery installed.
The buttons and touchscreen still don't work.
I think somehow the wrong firmware installed incorrect drivers for the touchscreen or something, but I thought the drivers are stored inside the ROM?
Click to expand...
Click to collapse
You probably need to burn it with 10.000V or sell it and give 5 euros to buy new one. :good:
ptrVoid said:
My friend tried to flash it and he used a wrong firmware for E455 instead of E460.
I don't think he did anything else because it doesn't have a custom recovery installed.
The buttons and touchscreen still don't work.
I think somehow the wrong firmware installed incorrect drivers for the touchscreen or something, but I thought the drivers are stored inside the ROM?
Click to expand...
Click to collapse
Hi...
can't flash it again ???
x-jack said:
Hi...
can't flash it again ???
Click to expand...
Click to collapse
Hello, I flashed it with a correct firmware but the touchscreen/buttons still don't work. Is there a way to flash the drivers only?
ptrVoid said:
Hello, I flashed it with a correct firmware but the touchscreen/buttons still don't work. Is there a way to flash the drivers only?
Click to expand...
Click to collapse
it can be helpful :
https://www.lg.com/global/support/o...tegoryId=CAT00000001&osCategoryId=CAT00000002
ptrVoid said:
Hello, I flashed it with a correct firmware but the touchscreen/buttons still don't work. Is there a way to flash the drivers only?
Click to expand...
Click to collapse
Hi!
Did you manage to fix that?
no way to fix this? i have the same issue
I killed my touchscreen too. Is the phone killed forever?
Hello, same situation here,
I compiled LG E460 kernel from LG sources then I flashed into phone (it already had ultraslimrom), then phone did not boot anymore.
I reflashed ultraslimrom and noticed that touch screen was dead.
I have then reflashed various version of stocked rom with "LG flash tool 2014" but situation is the same: touch screen is dead

Note 3 Suddenly Stuck up in Boot Loop

Hi Everyone,
Sorry for creating a new thread. My wife's Note 3 is currently stuck up in a boot loop. It just happened one day and we couldn't figure out what causes it.
The phone is still untouched - stock ROM, unrooted, network-locked.
I'm not new in the rooting process and everything, I just want to basically have some sort of peace of mind in asking you these:
1. Does rooting solve the phone's problem? I'm gonna flash a custom ROM afterwards, any suggestions?
2. Does rooting unlocks the phone itself? Or will it remain network-locked?
Thanks in advance!
1. Does rooting solve the phone's problem?
NO it does nothing bar unlock access to system .
2. Does rooting unlocks the phone itself
No it has nothing to do with network lock .
What model phone is it .
JJEgan said:
1. Does rooting solve the phone's problem?
NO it does nothing bar unlock access to system .
2. Does rooting unlocks the phone itself
No it has nothing to do with network lock .
What model phone is it .
Click to expand...
Click to collapse
Hi, thanks for replying. It's the N9005 model.
Any idea on how to solve the phone's problem? Can I just simply flash a new ROM or something?
Yes you can flash a new stock rom via Odin .
Find stock ROM for device HERE.
Make sure you get proper files. Things you need
-USB Drivers Latest
-Stock Rom
-Odin
-Other necessary file.
NOTE: Make sure you enter correct model number and select country for getting correct STOCK ROM.
Salman
If I helped you please Click on Thanks Button
Salman Al-Badgail said:
Find stock ROM for device HERE.
Make sure you get proper files. Things you need
-USB Drivers Latest
-Stock Rom
-Odin
-Other necessary file.
NOTE: Make sure you enter correct model number and select country for getting correct STOCK ROM.
Salman
If I helped you please Click on Thanks Button
Click to expand...
Click to collapse
Hi, thank you. Problem is now solved.
lawgone said:
Hi, thank you. Problem is now solved.
Click to expand...
Click to collapse
Great

**HELP** Lenovo Tab 3 A8 (TB3-850M) Not booting even after flashing stock rom!

Hello
I have a Lenovo Tab 3 A8 (TB3-850M) that is bricked. I tried to reflash Stock ROM but it still doesn't boot.
When I do a Memory test everything is fine except
"NAND Flash not found"
"UFS Not Found"
I have read about these errors but I didn't get it working.
Hope to see your help soon!
~DeblaGaming/TechNotesStuff
DeblaGaming said:
Hello
I have a Lenovo Tab 3 A8 (TB3-850M) that is bricked. I tried to reflash Stock ROM but it still doesn't boot.
When I do a Memory test everything is fine except
"NAND Flash not found"
"UFS Not Found"
I have read about these errors but I didn't get it working.
Hope to see your help soon!
~DeblaGaming/TechNotesStuff
Click to expand...
Click to collapse
You originally said:
DeblaGaming said:
Need help with TB3-850M
I flashed TB3-850M Stock ROM using SP Flash tool but my tablet is still stuck on Lenovo Logo! ... plz help I need it fast
Click to expand...
Click to collapse
I may be able to help if you answer the following:
Did the problem start with flashing stock ROM, or did you flash to try to fix existing problem? If preexisting, did it occur with normal use, or while doing any modding?
Did you possibly delete any critical partitions using sp flash tool? Eg, did you use format function?
Nb. I monitor the main TB3-850F threads where you previously posted, but won't know you've replied here unless you mention me or reply using my handle in quote. PW
Hello I actually found out that the device had a corrupt nand/emmc and I can't fix it. So I basicly party it out, sold the parts and threw the rest in the trash

Error verifying vbmeta image

what is the best way to recover from this? I can't seem to boot my device at all.
which device
Someone had this issue.
https://forum.xda-developers.com/galaxy-a70/help/a70-vbmeta-error-magisk-update-20-0-t3982421/amp/
I have the same problem with a Note 10 5g N971N I did the whole procedure to install the TWRP with the corresponding files and when Odin appears pass and wanting to enter recovery it does not go beyond the samsung logo
JRoulet8 said:
I have the same problem with a Note 10 5g N971N I did the whole procedure to install the TWRP with the corresponding files and when Odin appears pass and wanting to enter recovery it does not go beyond the samsung logo
Click to expand...
Click to collapse
Have you solved this problem i am also facing the same issue in my samsung a31
ninjasinabag said:
Someone had this issue.
https://forum.xda-developers.com/galaxy-a70/help/a70-vbmeta-error-magisk-update-20-0-t3982421/amp/
Click to expand...
Click to collapse
I wish there was more solutions than just one for this specific device
I have a samsung tab s6 lite and it needs the patched file which I have no way of getting atm

Categories

Resources