Hi,
is there a 5.1 rom for the mcu 5.3.18-7-10-650201-160220?
or how can i upgrade to min 4.4.4?
i have now 4.4.2 Navi IQ and i'm experience problem with the rom.
the biggest problem i have is that the steeringwheel controls not always work like they should.
cheers
no one??
is there no one that can help me with porting a 5.1.1 rom to the mcu 5.3.18??
really wondering same thing, or to 4.4.4
Related
I have the PAC rom flashed on my Nexus 4 and it works fine(with a few neglidgeable bugs) but how do i know that its the best or most up to date version of the rom out there? The one i have is 4.3 android and the zip folder is nightly-20131001. I know there are newer ones but how should i decide which to install? Also the feature for OTA updates isnt functioning correctly. It says server is Borked(yes not broke, borked). Is this a problem for me or everyone?
I will be greatful for any help on this topic.
Hi
I was wondering if you have any suggestions on rom where the audio will work during calls.
I have tried stock nexus 5.0, 5.0.1, 4.4.4 and PA latest Alpha.
All of these continued to give me no audio during call.
Instead of keeping on trying roms randomly, I wanted to try something which is likely to work.
Somebody mentioned omni rom is working with audio during call, is this the general feeling?
I really like Lollipop interface and would love to have a lollipop rom if possible? Any other advice on why my audio during calls may not be working even with downgrading to 4.4.4?
Thanks
Edit: Tried OMni ROm Feb 13, 2015 Nightly; 3.4.0-perf-ge7e8c8f omnirom kernel; baseband M9615A-CEFWMAZM-2.0.1701.03
Please help because audio during calls is still not working!
Bump... plz help... I am trying my best i can with my basic skills and am looking out to the community for some guidance.
If you don't a get audio in calls on stock you have a defective device. A rom isn't going to make a difference
Sent from my Nexus 9 using XDA Free mobile app
This problem only started once lollipop build came out. And i believe it is a problem loads of people are facing... something to do wit google play... I doubt that it's a defective device issue. Also, there are times when the audio does work and audio almost always works if I put the device on speakerphone. I am puzzled though why it is not working with OMNI and stock 4.4.4... could it have something to do with radio or bootloader? Are these aspects changed when flashing from TWRP recovery?
Dear Community,
I hope that this is the right place to post and any of you can help me.
My (aktual) Hardware/Software bits:
Galaxy Note 3 (SM-N9005)
Android: 5.1.1
Baseband-Version: N9005XXUGBOD3
Kernel-Version 3.4.108-f2fs-temasek-cm12.1-hlte-v1.25+
temaseksnappy #1
Temasek unofficial version V16.4
Build: LMY48J test-keys
Recovery: twrp 2.8.7.0-hlte-4.4
My actual problem is the following: My Note 3 by default had a 4.4.2 OFW on it, which I early upgraded to Lolipop 5.0.1. Everything works for the OFW 4.4.2 and 5.0.1 fine. As soon as I try to flash it with a CFW like CM11, CM12, CM12.1, CM12.1 (temaseksnappy), Gummy 4.4.4 I am losing the feature of auto rotation.
Of cource I did a clean flash, wiping DALVIK/CACHE/DATA and system, double time even one befor the flash, one after.
I also tried to put the battery, sim and sd out for few min before rebooting, while autorotation is manualy turned off.
Even a MODEM I flushed to fix this issue, but without success. Nothing helps but going back to OFW.
My last try was downgrading to the original 4.4.2, including baseband trieing from there to go to any CFW (CM11) as well as from OFW 4.4.2 -> OFW 5.0.1 -> CFW 5.1.1 (http://forum.xda-developers.com/galaxy-note-3/development/hlte-spr-vzw-temaseks-unofficial-t2953375)
There was also a post about a possible missing or broken lib in /system/lib which I replaced
Nothing helps (libGNU... something). This helped me alreay once in OFW after kicking out all the junk apps, but this is a different storry and not related anyhow.
Is there anybody out there who has the same problem or even better knows a solution?
My shot would be that:
1) CM has a problem with my particular hard-/software (Kernel, Baseband, Recovery, whatever) as I just tied CM or at least CM based CFWs.
PLEASE HELP.
Thank you very much in advance.
After about almost a year I cam back, giving again a try to CM, However I still have the same issue. Finally Anybody please!
Do you have the same issue with touchwiz 5.1.1 and 6.0.1?. Not the cm/aosp roms which aren't samsung based.
Sent from my SM-N920C
Rosli59564 said:
Do you have the same issue with touchwiz 5.1.1 and 6.0.1?. Not the cm/aosp roms which aren't samsung based.
Sent from my SM-N920C
Click to expand...
Click to collapse
Hello,
Thx for your reply. Right now I am on CM13 (temasek hlte v9.6)
http://forum.xda-developers.com/galaxy-note-3/development/hlte-spr-vzw-temaseks-unofficial-t2953375
This might should be specially compiled for sm-n9005 like mine.
Everything expect rotation works fine. However The accelleration is also working fine as I tested with "sensor test". Even the integrated camera App is rotating, however the rest is not.
In addition I downloaded "adaptive rotationfree", If I set it "stock Auto" nothing happens, but if I set it to "force auto" the rotation will work exacly once and then stops undtil I force it to portrait again.
What do you mean exactly with "touchwiz"? Is this jus a different kernel or a whole CFW?
As I wrote in the frist post I tried already a lot of CFW and ALL had this issue, but the OFW ;(
What shell I flush to get this working, which is not OFW?
BIG THX for YOUR HELP
Touchwizz is the firmware that comes with the stock Samsung firmware .
Also in custom Samsung based roms .
Hello,
thx for the tip with TouchWiz vs aosp. At the moment I am running "DarkLord N5 Release Candidate 2.12" which can get find here: http://forum.xda-developers.com/galaxy-note-3/development/rom-darklord-s6-port-alpha-t3083087
This Rom is TouchWiz Based and guess what ....
Autorotation works.
However I do not understand what the problem realy is and would prefer to run cm13 insteat. I mean even samsung devices got a accellerator within which works also fine with AOSP software, showing numbers moving while turning the phone. In addition for example on the post http://forum.xda-developers.com/galaxy-note-3/development/hlte-spr-vzw-temaseks-unofficial-t2953375 it is said that this is explicite for note 3 including the model n9005. So ...
Can anybody point me to the problem or even better to the fix?
Is there any chance CM would fix this?
Regards
I know this should not be a big deal but I have an issue with EMUI on Android 6.0.1 on my P8: PowerAMP skins does not work on any EMUI based device over Android 6.0.1 (not just the P8).
Unfortunatelly I dont know much about ROM developments and the causes of the issue, or if there is a way to fix it. As some of you guys develop ROMs you might have a clue what cause this problem? Or could you consider it during the development of Your new ROM if it does not take much of your time?
Thanks.
I have a P8 with the latest firmware update (B382) & PowerAmp skins work fine.
Perhaps some other common app installed on both is causing the problem?
Are your phones with stock Huawei firmware, unrooted & unaltered in any way?
Have you tried uninstalling & reinstalling PowerAmp?
This is my present ROM's full build number (Europe/UK): GRA-L09C432B382
EMUI version: 4.0.1
Android version: 6.0 (not 6.0.1)
Hi Dear Friendns I need Rom (Frimware ) Andoid Box sunvell R69 RAM 2G Factory android IS version 10 ??
Can anyd Body Share with me this ROM
I share Picture Of my Board
where i find firmware for r69
I have tried the ROM below based on android 10 and it's much faster than the stock rom 7.1.
CANAL T3CH ASSIS - H3 ALLWINNER ANDROID 10.zip
After install, change the language under preferences.