Related
Please help needed!!
I'm stuck here for 3 days
Ok I'm going to tell everything I did,,
My Gionee E7 is indian version.
First I rooted my phone with kingo Root.
Than I flashed CWM chinese version.
I upgraded my system to kitkat and changed the recovery to stock.
I used it for a week than some how my music player and gallery were corrupted.
I don't have any rom so I download one but it was in chinese, flashed it to my gionee. than after rooting,,
I flashed the CWM, same I flashed weeks ago
Here my problem started :crying:
The CWM is not starting. I used recoery tool to boot into recovery after boot up it shows black screen. I used every method holding Vol+ and power button but the same result.
than I tired to get back to my stock recovery but it does the same.
flashed many times both recoveries but didn't worked.
I searched a lot and find a TWRP. I flashed it and wow it worked Finally I can boot into recoery mode.
Now I find the Nandroid backup of indian version. I made it a zip and flashed it through twrp.
My phone is back to indian version but its slow, not too much but its slow; camera, gallery and other apps take some time to open. I can't make or rcv phone calls. Now what i did is download the update form System update.
Now i got kitkat rom.zip but twrp failed to install it.
Some one on the internet was saying that its the problem with my Kernel. I have the latest kernel so CWM won't work cuz it uses old kernel and display drivers.
My
android version is 4.2.2
Kernel version is 3.4.0-svn2155
I also got TWRP for lolipop,
and I patched binary_update in my kitkat rom too but TWRP can't flash it
Thats my whooooolllleeeee story. "
I got stuck with this for almost 3 days now I'm damn tired can't do it anymore plz help :crying::crying::crying:
I figured it out by myself
Ok guyz didn't get any help so I figured it out by my self.
I'm posting it here so if anyone gets stuck like me could solve his issue
I used GNQC Download tool and flashed the whole firmware of my cell including, kernel, rom, recovery, boot everything.
Now I'm back to stock indian rom (jellybean) with stock recovery and now I'm going to upgrade to kitkat
I'm new user so I can't posts links just replace the (dot) in the link,
First download stock firmware of Gionee e7 in following link, GNQC download tool and drivers also included in this zip:
www(dot)androidxda.com/download-gionee-stock-rom-models
Just unzip it and follow the instructions on this site:
www(dot)androidxda.com/gnqc-downlod-tool
I didn't slept last night bcuz of this mess now going to sleep whole day :silly:
Goodnite and bless you all :angel:
AkashX4686 said:
Ok guyz didn't get any help so I figured it out by my self.
I'm posting it here so if anyone gets stuck like me could solve his issue
I used GNQC Download tool and flashed the whole firmware of my cell including, kernel, rom, recovery, boot everything.
Now I'm back to stock indian rom (jellybean) with stock recovery and now I'm going to upgrade to kitkat
I'm new user so I can't posts links just replace the (dot) in the link,
First download stock firmware of Gionee e7 in following link, GNQC download tool and drivers also included in this zip:
www(dot)androidxda.com/download-gionee-stock-rom-models
Just unzip it and follow the instructions on this site:
www(dot)androidxda.com/gnqc-downlod-tool
I didn't slept last night bcuz of this mess now going to sleep whole day :silly:
Goodnite and bless you all :angel:
Click to expand...
Click to collapse
Hello my friend, please help me.
I am trying to flash stock inidan rom 4.2 but.. I installed all CWM for E7 found on the internet and I am getting black screen. I managed to Install TWRP but TWRP cannot flash the rom that I need to flash. I flashed a chinese 4.2 but is piece of garbage..
gngc-download-tool said that the com port is closed.
I have windows 64 is this the problem causing gngc not working?
No its not, it is working on 64bit windows very well.
In TWRP factory reset and format system and data, than install
Chinese 4.2 ROM. After that boot it and try it again.
It should work!
bllkarv said:
Hello my friend, please help me.
I am trying to flash stock inidan rom 4.2 but.. I installed all CWM for E7 found on the internet and I am getting black screen. I managed to Install TWRP but TWRP cannot flash the rom that I need to flash. I flashed a chinese 4.2 but is piece of garbage..
gngc-download-tool said that the com port is closed.
I have windows 64 is this the problem causing gngc not working?
Click to expand...
Click to collapse
For me...problem!
there´s a cwm recovery that flashes over the kernel...
i flashed it and than i was unable to go to recovery, every time i tried the phone power off
Solution: Flash the stock boot.img
Use the file according to the Android version...
Help
I just rooted my gionee elife e7. Flashed the chinese recovery which seemed to be the only one which would be compatible. But, while changing a few setting using pimp my rom, the software just stopped working. Errors keep showing up on the screen - "system.ui is not working", "android app is not working", I cannot even go the settings because "settings is not working". Third party apps still seem to work, so, whatsap and stuff continue to function. Doing a factory reset or flashing firmware again seem to be the only viable option.
But, when I try to load up the bootloader using the power and volume keys, it gets stuck on the screen showing the gionee logo and it reads 'fastboot mode' in the bottom left hand side corner. So,
a. can you offer any advice which may be useful ?
b. can you share the link from where you got a TWRP recovery which will work on the Elife ?
c. do you have any idea what exactly went wrong here ?
Any help you can provide will be appreciated because, it's my mausi's phone and I will have a very tough time explaining what really went down here.
Regards,
Hello Guys,
At first a little background story:
I bought the Tablet 3 Month ago. I have got the Update to Android 6.0 in January and unfortunately, I applied it.
So If you don't want to apply a custom rom do not update to 6.0, because 5.1.1 is much better.
I am not responsible if anything goes wrong.
Ok, so let's get started:
At first you must install Minimal ADB and Fastboot on your PC/Laptop/Mac.
Windows: https://forum.xda-developers.com/showthread.php?t=2588979
Linux/Mac: http://rootmygalaxy.net/install-adb-and-fastboot-on-mac-or-linux/
Here is the link for all OSs: http://lifehacker.com/the-easiest-way-to-install-androids-adb-and-fastboot-to-1586992378
Before you can Root or flash a Custom Rom you must flash the recovery:
You will need:
-Nvidia Family Drivers(Extract it in a folder of your choice): http://nvidiashieldzone.com/files/shieldtv/shieldfamilydriver.zip not working anymore, official link:
http://developer.download.nvidia.com/mobile/shield/SHIELD_Family_WHQL_USB_driver_201801.zip
-As many of you are experiencing problems with my previously mentioned TWRP 2.8.7.3 version I am replacing the link with the official TWRP Shield Tablet Download Site. Just take the newest stable version: https://dl.twrp.me/shieldtablet/ (Put the file into the ADB+Fastboot Folder)
-TWRP 2.8.7.3 Recovery(Put the file into the ADB+Fastboot Folder): Download URL: https://www.androidfilehost.com/?fid=24269982087009777
Developer Post: http://forum.xda-developers.com/shi...recovery-twrp-2-8-7-0-touch-recovery-t3257172
Install the Drivers
Connect your Tablet to your PC
Windows:
Open your Device Manager
If there Is a device with a yellow ! klick on it and update the Drivers Manually(select the Folder where you extracted the Family Divers)
Linux:
You don't need any drivers
(For every fastboot command in ADB+Fastboot you will need a "sudo" in front of it...)
Mac:
You also don't need any drivers
(For every fastboot command in ADB+Fastboot you will need a "./" in front of it...)
Flash Recovery
1. Open Minimal ADB and Fastboot
2. Type in
Code:
adb devices
if you get a long term of numbers and letters your drivers are correctly installed, If this command does not bring up a device, check your cable connection and/or update your drivers again.
3. Now you must enable developer options on your SHIELD Tablet K1
3.1 Go to your Setting, scroll all the way down and choose Info(or similar)
3.2 Tap seven times on the Build Number
3.3 Now go back and now there is a new menu point Developer Options
3.4 Open them and Enable USB Debugging
4. Now type
Code:
adb reboot bootloader
EDIT: 4.1 To enable the fastboot protocol, you must select "Fastboot mode" on the Tablet. After that type
Code:
fastboot devices
in order to check if fastboot is enabled.
5. Before you can do anything you must unlock the Bootloader
5.1 Type in
Code:
fastboot oem unlock
5.2 Follow the Instructions on the Terminal(On your tablet: press the volume down button and then the power button)
6. Now you are ready to flash the recovery
6.1 Type in
Code:
fastboot flash recovery twrp-x.x.x-x-shieldtablet.img
6.2 Wait until it is finished then navigate with the volume buttons through the Menu on your Tablet and choose the option recovery mod with you power button
7. You are now in a custom Recovery on this point you must decide what you want to do:
-Do you only want to root your Device
-Or do you want to install a custom rom
Custom Rom
If you want to be on the safe side you should consider wiping the /data partition (Troubleshoot section at the end of the Post)
1. You can access your tablet from your PC
2. Now move your Custom rom to your internal or SD Card Storage
2.1 Download your custom rom of your choice.
2.1.1 Cyanogenmod 12.1 (Android 5.1.1) and BlissPop v4.0.3 https://www.androidfilehost.com/?w=files&flid=150249
2.1.2 Cyanogenmod 13.0 (Android 6.0) https://androidfilehost.com/?w=files&flid=27600&sort_by=date&sort_dir=DESC
2.1.3 Nvidia Shield Tablet Resurrection ROM (Android 6.x) https://androidfilehost.com/?w=files&flid=60681&sort_by=date&sort_dir=DESC
2.1.4 BlissPop
2.2 Download Google Apps (Gapps) (ARM Device)
2.2.1 Android 5.1 http://opengapps.org/?api=5.1&variant=stock
2.2.2 Android 6.0 http://opengapps.org/?api=6.0&variant=nano
2.3 Download Nvidia Apps (You still need to install Nvidia Shield HUB from the Play Store)http://forum.xda-developers.com/shield-tablet/development/shield-apps-cyanogenmod-12-t3070116
3. In TWRP click on Backup and Swipe to Back Up
3.1 Now go to Wipe. For a dirty flash you will only need to wipe the Dalvik and Cache for a full wipe select Dalvik, System, Data, Cache
4. After it has finished Click on Install and choose the .zip of your Custom Rom
4.1 To install the Google Apps click on Add More Zips and select the GApps zip
4.2 And again click on Add More Zips and select nvsystemservices.zip
4.3 now you can Swipe to Confirm Flash
Root
Download the Latest Stabel SuperSU file: http://download.chainfire.eu/supersu-stable and copy it to the internal or SD Card Storage
For Android 7.0 (Nougat) the SuperSU r4 2.78 version is confirmed working.
1. Open Minimal ADB and Fastboot
2. Type in
Code:
adb reboot recovery
to enter the recovery mode
3. In TWRP click on Backup and Swipe to Back Up
4. After it has finished Click on Install and choose the UPDATE-SuperSU-v2.65-20151226141550.zip (or similar) and Swipe to Confirm Flash
5. Restart you Tablet and now a new App SuperSU is Installed
Xposed Framework
Download the Xposed Framework Zip file, take the newest version:
(The Shield Quad Core has a 32 bit arm architecture, so you need the framework for arm)
SDK21 for Android 5.0: http://dl-xda.xposed.info/framework/sdk21/arm/
SDK22 for Android 5.1: http://dl-xda.xposed.info/framework/sdk22/arm/
SDK23 for Android 6.0: http://dl-xda.xposed.info/framework/sdk23/arm/
and the apk: https://forum.xda-developers.com/attachment.php?attachmentid=3921508&d=1477916609
and move them to you Tablet.
Developer Thread (for the uninstaller): https://forum.xda-developers.com/showthread.php?t=3034811
Go to Recovery with Root
1. Now that you have root you don't need you PC anymore. Go to the Play store and download Quick Boot
2. Open Quick Boot and klick on Recovery
3. Allow Root rights and the Tablet should boot into recovery
Go to Recovery without Root
1. Shut down your Tablet
2. Press and hold the Vol down button and the Power button until the Bootloader screen appears
3. Navigate with the volume buttons through the Menu on your Tablet and choose the option recovery mod with you power button
Install Xposed Framework
1. In the TWRP Recovery (Optionally you can make a Backup) select Install and choose the xposed-v80-sdk22-arm.zip file
2. When you get an Error let me know
3. Now Restart you Tablet and install the .apk file normally
4. In the App Press Framework and now there should be a green writing saying: Xposed Framework version 80 is active
5. Here is a list of very useful programs for the Xposed Framework: http://forum.xda-developers.com/android/general/best-xposed-modules-android-t3103027
Please Leave a post if you are getting errors or something isn't clearly explained! And if I could help you, consider giving me a Thanks
Troubleshoot
If you are stuck in a Bootloop:
Without data loss(e.g. when you installed Xposed framework zip and its stuck in a bootloop)
1. flash the stock rom boot image BUT ONLY IF YOU DONT USE A CUSTOM ROM (it will probably loose root). go to https://developer.nvidia.com/gameworksdownload#?search=SHIELD Tablet K1&tx=$additional,shield and download the latest NVIDIA SHIELD Tablet K1 Recovery OS Image
2. Unpack the zip file and flash it to your Tablet
Code:
fastboot flash boot boot.img
If something went wrong while flashing a custom rom (after that you will need to flash the custom/stock rom again)
wipe the /data partition. It could be encrypted from the previous rom. Be aware that you need to reinstall the rom, therefore loose all your data. Troubleshot guide by agentbob123
-Toby
Credits:
@xsquid mac support
@agentbob123 suggestion to mention to wipe the /data partition as a solution for being stuck in a bootloop
@champs777 suggested the newest TWRP
@grävling mentioned importance of waiting until the recovery flash is finished
Toby9 said:
Hello Guys,
At first a litte background story:
I bought the Tablet 3 Month ago. I have got the Update to Android 6.0 in January and unfortunately i applied it.
So If you don't want to apply a custom rom do not update to 6.0, because 5.1.1 is much better.
Ok, so let's get started:
I am not responsible if anything goes wrong.
At first you must install Minimal ADB and Fastboot on your PC/Laptop/Mac.
Here is the link for all OSs: http://lifehacker.com/the-easiest-way-to-install-androids-adb-and-fastboot-to-1586992378
Before you can Root or flash a Custom Rom you must flash the recovery:
You will need:
-Nvidia Family Drivers(Extract it in a folder of you choice): http://nvidiashieldzone.com/files/shieldtv/shieldfamilydriver.zip
-TWRP 2.8.7.3 Recovery(Put the file into the ADB+Fastboot Folder):
Download URL: https://www.androidfilehost.com/?fid=24269982087009777
Developer Post: http://forum.xda-developers.com/shi...recovery-twrp-2-8-7-0-touch-recovery-t3257172
Install the Drivers
Connect your Tablet to your PC
Windows:
Open your Device Manager
If there Is a device with a yellow ! klick on it and update the Drivers Manually(select the Folder where you extracted the Family Divers)
Linux:
You dont need any drivers
(For every fastboot command in ADB+Fastboot you will need a sudo in front of it...)
Mac:
2016/02/16 Please leave a post if you how to do this
1. Open Minimal ADB and Fastboot
2. Type in
Code:
adb devices
if you get a long term of numbers and letters your drivers are correctly installen, If this command does not bring up a device, check your cable connection and/or update your drivers again.
3. Now you must enable developer options on your SHIELD Tablet K1
3.1 Go to your Setting, scroll all the way down and choose Info(or similar)
3.2 Tap seven times on the Build Number
3.3 Now go back and now there is a new menu point Developer Options
3.4 Open them and Enable USB Debugging
4. Now type
Code:
adb reboot bootloader
5. Before you can do anyting you must unlock the Bootloader
5.1 Type in
Code:
fastboot oem unlock
5.2 Follow the Instructions on the Terminal(On your tablet: press the volume down button and then the power button)
6. No you are ready to flash the recovery
6.1 Type in
Code:
fastboot flash recovery twrp-2.8.7.3-shieldtablet.img
6.2 Wait until it is finished then move with the volume buttons through the Menu on your Tablet an choose the option recovery mod with you power button
7. You are now in a custom Recovery on this point you must decide what you want to do:
-Do you only want to root your Device
-Or do you want to install a cutom rom
Custom Rom
1. You can access your tablet on your pc
2. Now move your Custom rom to your internal or SD Card Storage
2.1 Download your custom rom of your choice. I decided to use Cyanogenmod 12.1 (Android 5.1.1) http://forum.xda-developers.com/shi...-cyanogenmod-12-shield-tablet-lte-na-t3055043
2.2 Download Google Apps (Gapps) (ARM Device) http://opengapps.org/?api=5.1&variant=stock
2.3 Download Nvidia Apps (You still need to install Nvidia Shield HUB from the Play Store)http://forum.xda-developers.com/shield-tablet/development/shield-apps-cyanogenmod-12-t3070116
3. In TWRP click on Backup and Swipe to Back Up
4. After it has finished Click on Install and choose the .zip of your Custom Rom
4.1 To install the Google Apps click on Add More Zips an select the GApps zip
4.2 And again click on Add More Zips and select nvsystemservices.zip
4.3 now you can Swipe to Confirm Flash
Root
Download the Latest Stabel SuperSU file: http://download.chainfire.eu/supersu-stable and copy it to the internal or SD Card Storage
1. Open Minimal ADB and Fastboot
2. Type in
Code:
adb reboot recovery
to enter the recovery mode
3. In TWRP click on Backup and Swipe to Back Up
4. After it has finished Click on Install and choose the UPDATE-SuperSU-v2.65-20151226141550.zip (or similar) and Swipe to Confirm Flash
5. Restart you Tablet and now a new App SuperSU is Installen
Please Leave a post if you are getting errors or someting isn't clearly explaned!
-Toby
Click to expand...
Click to collapse
My tablet just keeps rebooting to the lock screen whenever I try to go to recovery mode... Somehow twrp doesn't stick... It did when I was on Lollipop. I have already tried to flash the recovery, do a full reboot before trying to get in twrp but without success.
On mac
You dont need any drivers
(For every fastboot command in ADB+Fastboot you will need a ./ in front of it...)
example being ./fastboot oem unlock
xsquid said:
On mac
You dont need any drivers
(For every fastboot command in ADB+Fastboot you will need a ./ in front of it...)
example being ./fastboot oem unlock
Click to expand...
Click to collapse
Thank you I added this in guide
nielsscholte said:
My tablet just keeps rebooting to the lock screen whenever I try to go to recovery mode... Somehow twrp doesn't stick... It did when I was on Lollipop. I have already tried to flash the recovery, do a full reboot before trying to get in twrp but without success.
Click to expand...
Click to collapse
Try other TWRP versions like 2.8.7.0 or 2.8.7.1 i think the 3.0.0.0 is for Andoid 6.0 devices so if you are currently in the newest version of the Android OS try this one out
The 3.0 versionof TWRP was unstabel on my device so you should flash it wipe the storage and flash one of the older ones
nielsscholte said:
My tablet just keeps rebooting to the lock screen whenever I try to go to recovery mode... Somehow twrp doesn't stick... It did when I was on Lollipop. I have already tried to flash the recovery, do a full reboot before trying to get in twrp but without success.
Click to expand...
Click to collapse
3.0.0.0 wasn't out yet when I did mine but it was doing the same thing and this worked perfectly:
fards said:
Try deleting recoveryonboot.p in /system
Click to expand...
Click to collapse
Credit to fards.
xsquid said:
3.0.0.0 wasn't out yet when I did mine but it was doing the same thing and this worked perfectly:
Credit to fards.
Click to expand...
Click to collapse
How can I remove this file without root ?
SonicDBZFan07 said:
How can I remove this file without root ?
Click to expand...
Click to collapse
Try your normal command line for flashing recovery except change flash to boot. It doesn't flash it, just boots to it.
In other words, if you are using:
1. Fastboot Flash recovery recoveryname.img
Do instead:
2. Fastboot boot recovery recoveryname.img
While in recovery (make sure the supersu zip is on the sd card or wherever you normally flash files from first) flash supersu. You should now be rooted but without a recovery.
Go then to delete the file and then reboot, flash the recovery as normal (#1), reboot and then it should be good to go. It was for me.
rooted device no need to unlock bootloader it will unlock for ittself
just go to playstore and dowload twrp manager
choose the name of your device
and choose one of the two versions available
for shield tablet the version 3.0.0.0 doesnt work well it spilts the screen but wthe other version Works great
the link is twrpmanager on play.google
this way you dont need to connect your tablet to your pc
Great work!
Thank you for the awesome guide. Besides deleting the TegraOTA apk, is there any other app/service that I should disable to prevent OTA updates?
Followed the guide after screwing my device up with official firmware. Thanks for nothing Nvidia, why are you offering OTA that cause the device to stop working correctly.
Nothing happened other than appearing to boot itself to the "powered by android" (kernel) screen over and over.
Held down power + volume UP ...
And it factory reset itself.
Somehow.
Did I mention that Nvidia is a terrible company?
Edit: Fixed using TWRP v3.0.0 - this guide should be updated to reflect this particuarly as people who screw their device up after trusting Nvidia OTA MM will be using it.
diji1 said:
Followed the guide after screwing my device up with official firmware. Thanks for nothing Nvidia, why are you offering OTA that cause the device to stop working correctly.
Nothing happened other than appearing to boot itself to the "powered by android" (kernel) screen over and over.
Held down power + volume UP ...
And it factory reset itself.
Somehow.
Did I mention that Nvidia is a terrible company?
Edit: Fixed using TWRP v3.0.0 - this guide should be updated to reflect this particuarly as people who screw their device up after trusting Nvidia OTA MM will be using it.
Click to expand...
Click to collapse
I'm sorry that you had that problem but this guide is a general guide and not an screw nvidia (besides they are awesom giving us a really good tablet for 200 Buck, but jea?) guide. TWRP v3.0.0 has his bugs so generally when you have finished deleting the stock rom you should flash TWRP 2.8.7.3 works the most stabel.
Trafalgar Square said:
Great work!
Click to expand...
Click to collapse
Thanks, i appreciate that
Add TWRP to M image (Shield 1.1)
Folks,
Just received Nvidia Shield K1 and OTA immediately upgraded it to M (Shield 1.1) and I unlocked bootloader no problem. However when I go to flash or temp boot twrp 2.x or 3.x it flashes OK, but when I reboot (either via fastboot or hard off/start to recovery manually) it appears it is overwriting the recovery partition and it just boots normally.
Is there a limitation to flashing twrp bootloader in M, and do I have to downgrade to L to flash recovery partition?
I seem to be happy w/ stock (limited stick time), I just want to root at this point and install my favs. Once I get this running will supersu pro preserve root, or do I need to turn off nvidia OTA process.
Also I see optimization for chrome, does this do anything X1 optimizations)?
Thanks
psychic99 said:
Folks,
Just received Nvidia Shield K1 and OTA immediately upgraded it to M (Shield 1.1) and I unlocked bootloader no problem. However when I go to flash or temp boot twrp 2.x or 3.x it flashes OK, but when I reboot (either via fastboot or hard off/start to recovery manually) it appears it is overwriting the recovery partition and it just boots normally.
Is there a limitation to flashing twrp bootloader in M, and do I have to downgrade to L to flash recovery partition?
I seem to be happy w/ stock (limited stick time), I just want to root at this point and install my favs. Once I get this running will supersu pro preserve root, or do I need to turn off nvidia OTA process.
Also I see optimization for chrome, does this do anything X1 optimizations)?
Thanks
Click to expand...
Click to collapse
After you flash twrp reboot to recovery. I may be wrong, but I think the stock ROM overwrites the custom recovery at reboot. If you reboot to twrp first after flash, twrp will disable this.
Sent from my SHIELD Tablet K1 using Tapatalk
Rooting
Hi everyone,
Yesterday got my new Nvidia Shield Tegra K1 and upon using it I noticed it's a great tablet for it's price range and will do my job easier while flying my Phantom 4. To be honest it's seems very stable and solid but was thinking about rooting it. I have some questions regarding the process wince I haven't rooted anything since my HTC Fire, log time ago that was. What are the benefits of rooting this device ? Will I still be able to update the Shield with its official updates ? Will I be able to roll back to an unrooted tablet should I need too ? I wasn't planning on flashing a custom rom but if I'll do what are the pros and cons of doing so ? I know that maybe searching this forum I would find all the answers needed but since there is so much information and threads I'm lost as from were to start from.
Would be nice to guide me about how to properly root my device with all the necessary links. My tab is running on Android 6.0.
I thank you so much guys for the hard work you all do in providing such information. I know it takes a lot of time and patience.
I just got a Shield K1. I like it a lot but I wanted to root it. Then I saw how confusing it is to distinguish between it and the previous model. My guess is whatever is out there that says Shield Tablet means the old one not the K1. I also updated mine to MM cause I'm using and 128GB micro sd card for internal storage. I guess I'll just have to wait until more support comes out for this tablet such as a stable TWRP 3.0 Recovery and the ability to gain root access and custom ROMs like CM 13.
do you recommed to install all OTAs before install custom recovery and custom roms or is it better to install twrp-2.8.7.1 out of the box and then go for the custom stuff ?
I would install all updates to get the latest bootloader. Do not install twrp 2.8.7.1. Install the official 3.0.x from the official site.
Hello guys.
I have successfully ported TWRP 3.0.0-0 for our Smart Prime 6.
It's 100% working !!
There are NO BUGS !! :good:
DOWNLOAD
NEW LINK: DOWNLOAD
________________________________________
How to install
Via app:
1) Download TWRP 3.0.0-0 from the link above and place it on internal storage of your phone.
2) Download Flashify app from Google Play Store.
3) Open Flashify app.
4) Grant root permissions.
5) Click "Recovery image" and then click "Choose a file"
6) Navigate to the folder where you placed TWRP 3.0.0-0 and choose the .IMG file.
7) Press "Yup!" button and wait.
8) After a while the phone will require reboot. So click "reboot" button.
9) Phone will reboot and automatically boot into TWRP, so you can press reboot to system.
10) Enjoy!
Special thanks to Oneb1t for modded .fstab file! :highfive:
edit: you can use Flashfire app too instead of Flashify, but it's not recommended, because the latest version of the Flashfire app is not flashing properly.
Brilliant! Thank you so much! Do you know any custom ROM what is better than the factory ROM?
There is no custom ROM for this phone yet.
But I'm trying to make LITE ROM.
Adreno306™ said:
There is no custom ROM for this phone yet.
But I'm trying to make LITE ROM.
Click to expand...
Click to collapse
Do you think it's easier/possible to adapt a ROM from a similar device like say, the Alcatel
Pop 2 (5) Premium ? I don't know if there's any ROM for that phone tho, but since it's branded as Alcatel you might get more support from the community here than by using Vodafone's name.
Hello, Demonlord6.
I have tried to make a stock flashable ROM via dumping the system folder and the boot.img file, but without success.
It does not boot properly.. when I tried to flash it without dalvik/system wipe everything was as before.
When I tried to wipe /system and dalvik first and then flash the ROM, it causes bootloop.
So now I'm trying to fix this issue..
I don't know where the problem is.
So when this issue will be solved I will try to build a ROM from Alcatel phones with same specs.
Adreno306™ said:
Hello, Demonlord6.
I have tried to make a stock flashable ROM via dumping the system folder and the boot.img file, but without success.
It does not boot properly.. when I tried to flash it without dalvik/system wipe everything was as before.
When I tried to wipe /system and dalvik first and then flash the ROM, it causes bootloop.
So now I'm trying to fix this issue..
I don't know where the problem is.
So when this issue will be solved I will try to build a ROM from Alcatel phones with same specs.
Click to expand...
Click to collapse
Hey, Andreno306
I don't know much about Rom's in that level of expertise I'm afraid :/ but I did some digging and came across this simple tutorial on XDA:
http://forum.xda-developers.com/showthread.php?t=2387941
I imagine it does not work for every single device out there, at least not with modifying stuff after, but it might be a good starting point I think, in fact I would try to actually make one myself had I a working PC currently at home. But even if I did I had no way of testing it because this is currently my daily driver phone.
Just wanted to say that I'm also very interested in getting a slim ROM for this device. I can't offer any expertise I'm afraid! Just wanted to show that there are people interested in your project.
:highfive:
Stock Kernel
Thanks, it works great.
This is little off-topic but does anyone has the stock kernel, i flashed NeoKernel but it is not that good and i forgot to make a backup do can anyone please link me to the stock kernel?
vojta_horanek said:
Thanks, it works great.
This is little off-topic but does anyone has the stock kernel, i flashed NeoKernel but it is not that good and i forgot to make a backup do can anyone please link me to the stock kernel?
Click to expand...
Click to collapse
I have one
https://mega.nz/#!tMJD3B4T!f6m2ELYCVupqGCcN2aGbkrNzEqijLu7au-7usEfeVL0
But I recommend to restore it with the flashify app, because that's how the backup was made.
If, for some reason, you don't/can't restore it, then you can always try Sugar on the PC which basically restores everything to factory settings (recovery, kernel, etc, it all gets reset)
Demonlord6 said:
I have one
But I recommend to restore it with the flashify app, because that's how the backup was made.
If, for some reason, you don't/can't restore it, then you can always try Sugar on the PC which basically restores everything to factory settings (recovery, kernel, etc, it all gets reset)
Click to expand...
Click to collapse
Restored and my phone keeps turning off after boot(once i saw the turn off screen, other times it just vibrates at boot screen), isnt it the wrong file? (flashed wia flashify)
I was able to restore the boot from TWRP (lucky i made a backup this time)
vojta_horanek said:
Restored and my phone keeps turning off after boot(once i saw the turn off screen, other times it just vibrates at boot screen), isnt it the wrong file? (flashed wia flashify)
I was able to restore the boot from TWRP (lucky i made a backup this time)
Click to expand...
Click to collapse
Sorry there about the bootloop but glad u could restore it from TWRP, maybe it was because we have different ROM versions ?
Demonlord6 said:
Sorry there about the bootloop but glad u could restore it from TWRP, maybe it was because we have different ROM versions ?
Click to expand...
Click to collapse
I got this one: http://www.needrom.com/download/vodafone-smart-prime-6-vf-895n-debloatedclean-stock/#
vojta_horanek said:
I got this one: http://www.needrom.com/download/vodafone-smart-prime-6-vf-895n-debloatedclean-stock/#
Click to expand...
Click to collapse
Yeap, that's not the same version as my ROM, mine is not 130FNN etc. Maybe that's why it didn't work
Enviado do meu GT-S5280 através de Tapatalk
Sorry for the stupid question but... does it works on Smart Prime 7 too?
Has anyone installed that linked ROM? It seems to be what we are looking for... a slim debloated rom.
I presume we need to be rooted, install this TWRP, then flash that ROM?
It mentions unlocking the bootloader, I dont think I've seen any info anywhere about unlocking the bootloader.
Can anyone give a quick lowdown on all the steps required to install that ROM please?
Hi everyone, I discovered that Elephone Trunk and Smart Prime 6 have (almost) identical specs: https://www.devicespecifications.com...ison/c584481c6
So it would be great to "port" (or build ?) the official Nougat-OmniROM for Trunk to VF-895N: http://dl.omnirom.org/trunk/
Last but not least, here's official Vodafone Smart Prime 6 sources: Vodafone_Smart_prime_6_20150413.tar.xz
TWRP for vodafone smart max 4 990N (coolpad 8890u).
I tried this recovery image for vodafone smart max 4 990N (coolpad 8890u).
The phone is in a bootloop state. I think i have usb debugging enabled already.
So, in fastboot mode i can see the device in my pc in adb fastboot cmd.
Im trying to ''fastboot boot recovery.img" but it stops in ''booting..''.
Dont know whats the problem but for sure i can not find a specific twrp image for this device.
If i enter fastboot oem device-info it says ''(bootloader) Device unlocked: true''.
Any ideas ?
hi i was wondering if you could share how you did this or if you can make one for the Vodafone smart n9 (VFD720) it would help a lot of people out looking for this
Needed to root a Vodafone Smart Prime 6 (VF 895N) (got it from a friend because it became unresponsive from all the updated google play stuff ) to get linux-deploy running. Just wanted to leave a big thank you here for Adreno306 for his TRWP 3.0.0-0. it did the job very well!
Only the procedure to get it installed differed quite a bit for me, since Flashify is no longer available.
I wanted to preserve boot and just flash trwp to recover, what worked quite well.
The first thing I did was to boot the phone manually in recovery mode (Power+Vol up) and reset it to factory settings from there. It takes a little while. Then follow the setup, go to phone settings, enable developer mode and set usb debugging. If "unlock oem" is not available there, reboot into recovery again, set unlock there and reboot into bootloader.
The prerequisites are adb and fastboot, both must work. Means adb devices and fastboot devices must show the phone. What can make problems under win10 as it sometimes does not detect the phone in bootloader mode. An actual google usb driver is needed, as provided by google.
For me adb worked well, but when rebooted into bootloader with adb reboot bootloader, fastboot didnt detect the phone. With the phone still connected, the windows device manager showed an unknown device with and exclamation mark (!). Right click, install driver, select driver manually, select driver from device list, mark all devices (first entry) and click "disk", then point to the usb driver director and select "ADB fastboot driver". ( A more comprehensive description is available here )
Once adb and fastboot detect the device, it is time to prepare it. Boot to system (normal operation) first. Make sure that the TRWP 3.0.0-0.img is renamed to trwp.img and then
adb reboot bootloader
fastboot devices
fastboot oem unlock
fastboot boot trwp.img
Now the phone should show the trwp menu, set it up to root the phone and install SuperSU. Reboot into bootloader and
fastboot flash recovery trwp.img
fastboot reboot
Verify with adb reboot recovery, you should see trwp now. Reboot to system.
Now finally go into the app selector, start SuperSU, and root the phone. SuperSu uses trwp recovery mode to install its image and root is done.
Again, big thanks for providing the TRWP image!
Adreno306™ said:
Hello guys.
I have successfully ported TWRP 3.0.0-0 for our Smart Prime 6.
It's 100% working !!
There are NO BUGS !! :good:
DOWNLOAD
NEW LINK: DOWNLOAD
________________________________________
How to install
Via app:
1) Download TWRP 3.0.0-0 from the link above and place it on internal storage of your phone.
2) Download Flashify app from Google Play Store.
3) Open Flashify app.
4) Grant root permissions.
5) Click "Recovery image" and then click "Choose a file"
6) Navigate to the folder where you placed TWRP 3.0.0-0 and choose the .IMG file.
7) Press "Yup!" button and wait.
8) After a while the phone will require reboot. So click "reboot" button.
9) Phone will reboot and automatically boot into TWRP, so you can press reboot to system.
10) Enjoy!
Special thanks to Oneb1t for modded .fstab file! :highfive:
edit: you can use Flashfire app too instead of Flashify, but it's not recommended, because the latest version of the Flashfire app is not flashing properly.
Click to expand...
Click to collapse
Hi, I would like to try your tutorial but I can't root this phone (which is an important step in the tutorial), is there any way someone could help me??
Thanks
Hello dear Community!
It is depressing that my first appearance here is to ask for help, but I am going crazy.
So, I tried to Root my phone via Odin + CF Autoroot klte and it seemed to have been a success.
The root checker also said, that my device was rooted so I went on and installed TWRP to be able to install Lineage OS.
After getting Lineage to work I got a few error messages suddenly popping up, telling me that either "Music had stopped" or other android operation were closed because they didn't work properly.
I tried to install Gapps, it seemed to have worked but I was only able to open and enter the store once, afterwards the store never managed to load and then the app closed itself after starting it.
So I checked again with Root Checker, but this time it gave me an error message, too. It said, that my device was not rooted properly.
I guess this is were I made it worse by deciding to just root the phone again. Obviously, it didn't work either.
Afterwards I thought that maybe installing The Original Android OS and then unrooting the phone would be the best solution to be able to start anew.
First I tried to flah Lineage again and that made it impossible for me to boot the phone. The farthest I got was the setup page, were it tells you Hello and were you can choose a Language, but clicking the arrow key didn't do anything at all.
The recovery mode was also not the TWRP one anymore, but the original Android one and that was a huge problem for me.
Then I tried to flash the 6.1 OS for the S5 (I made sure it was the correct version), but now it is stuck at the "Samsung" screen while it boots.
It never boots though.
I don't know what to do anymore.
Please, I beg you, could anyone help me out?
Don't flash the latest Lineage OS ROM
Hello AsylumAlice u shouldn't have flashed the latest Lineage OS ROM because now u will need a new motherboard for your S5 since the ROM corrupts the MMC chip now u will need to get a new MMC chip or a new Motherboard sorry that your s5 is now hard bricked but when u get it fixed flash the DreamUX S8 Rom it works flawless on my S5 SM-G900i
Yours Sincely
Matty Bourke
mattybourke1994 said:
Hello AsylumAlice u shouldn't have flashed the latest Lineage OS ROM because now u will need a new motherboard for your S5 since the ROM corrupts the MMC chip now u will need to get a new MMC chip or a new Motherboard sorry that your s5 is now hard bricked but when u get it fixed flash the DreamUX S8 Rom it works flawless on my S5 SM-G900i
Yours Sincely
Matty Bourke
Click to expand...
Click to collapse
What are the grounds for your claims?
You needn't root via CF-autoroot if your end goal was to flash lineage. CF autoroot was intended to root stock roms with ease and less effort.
Flash The LATEST, official TWRP via odin then do a FULL WIPE. Wipe system, data, cache and dalvik cache.
From here on, you have two options:
1.) Sideload the LineageOS rom via ADB
2.) Transfer it to the phone's storage via MTP and flash it from TWRP.
As for how to accomplish this, the forum search bar and Google has your back. You need only choose one procedure.
If you need the Play Store, flash gapps AFTER flashing LINEAGE AND BEFORE REBOOTING.
Since you were under the idea that utilizing CF-autoroot was a necessity, I suggest that you re-read this post thoroughly before actually putting it into practice.
Kinloch said:
What are the grounds for your claims?
You needn't root via CF-autoroot if your end goal was to flash lineage. CF autoroot was intended to root stock roms with ease and less effort.
Flash The LATEST, official TWRP via odin then do a FULL WIPE. Wipe system, data, cache and dalvik cache.
From here on, you have two options:
1.) Sideload the LineageOS rom via ADB
2.) Transfer it to the phone's storage via MTP and flash it from TWRP.
As for how to accomplish this, the forum search bar and Google has your back. You need only choose one procedure.
If you need the Play Store, flash gapps AFTER flashing LINEAGE AND BEFORE REBOOTING.
Since you were under the idea that utilizing CF-autoroot was a necessity, I suggest that you re-read this post thoroughly before actually putting it into practice.
Click to expand...
Click to collapse
Thank you so much for your fast reply!
-> I flashed the newest Version for klte via Odin, but I can't get into the boot mode.
I only am able to enter the download mode. What can I do now?
Flash TWRP via odin again, untick the Auto-Reset option of Odin first. Then try booting to recovery via long holding the power, home and volume up button simultaneously without releasing any of the buttons until you successfully see the TWRP splash screen.
If that still doesn't work, reboot to recovery via adb from download mode. You need the adb and the usb drivers for your device.
If that still doesn't work, you might have flashed an incompatible version of TWRP.
Kinloch said:
Flash TWRP via odin again, untick the Auto-Reset option of Odin first. Then try booting to recovery via long holding the power, home and volume up button simultaneously without releasing any of the buttons until you successfully see the TWRP splash screen.
If that still doesn't work, reboot to recovery via adb from download mode. You need the adb and the usb drivers for your device.
If that still doesn't work, you might have flashed an incompatible version of TWRP.
Click to expand...
Click to collapse
Thank you so much, it worked perfectly!
I can now start my phone and use it normally.
But the Root Checker still says:
"Sorry! Root access is not properly installed on this device.
Device: SM-G900M
Android version: 7.1.2"
What should I do from now on?
Thank you so much for your help (agaiN).
And as for why I used the auto-root, well I just followed a guide that I found, it only had positive reviews so I assumed it was a correct tutorial.
AsylumAlice said:
Thank you so much, it worked perfectly!
I can now start my phone and use it normally.
But the Root Checker still says:
"Sorry! Root access is not properly installed on this device.
Device: SM-G900M
Android version: 7.1.2"
What should I do from now on?
Thank you so much for your help (agaiN).
And as for why I used the auto-root, well I just followed a guide that I found, it only had positive reviews so I assumed it was a correct tutorial.
Click to expand...
Click to collapse
just flash supersu in twrp
AronFerr said:
just flash supersu in twrp
Click to expand...
Click to collapse
I thought about doing that, but wasn't sure how exactly to proceed and what Version to install.
I downloaded SuperSU v.2.82 and put it on my internal storage.
Just install over TWRP the same way that I Installed Lineage and Gapps I suppose?
I guess if it doesn't work out, I just follow the steps from above again and retry?
Thank you so much. I feel like in idiot in this situation.
AsylumAlice said:
I thought about doing that, but wasn't sure how exactly to proceed and what Version to install.
I downloaded SuperSU v.2.82 and put it on my internal storage.
Just install over TWRP the same way that I Installed Lineage and Gapps I suppose?
I guess if it doesn't work out, I just follow the steps from above again and retry?
Thank you so much. I feel like in idiot in this situation.
Click to expand...
Click to collapse
yes just flash it but no wipes
I am having some issues when its in download mode my pc shows alot of drives n asking me to format it n the downloder is not reading my phone n the fastboot is showing the remote error n adb doesnt detect my phone at all......i need helppp*
I tried installing the stock os several times before but my phone boots to the 'lenovo for those who do' part n then reboots....it reboots before even the logo completes......it booted once n there is no sound no readings for sim at all......I NEED SERIOUS HELP
:crying:
:crying:
:crying:
Which version os did you have when the phone got bricked? I suppose you have twrp installed. First try to wipe data partition in twrp and reboot.
If that won't work then try installing a custom rom same as the android version you had on your phone (for example, if you had marshmallow os the find a marshmallow custom rom).
You can also try the same with any latest stock firmware. Make sure it is a flashable zip.
Hope this helps.