Related
Hello guys, I want to install a custom ROM on a friends i9500, the problem is that when I try to flash TWRP via ODIN, the program flashes the image but when I want to enter the recovery, TWRP isn't installed.. instead factory recovery opens.. I tried ODIN v3.04 and v3.07 with same results
TWRP is donwloaded from the webpage.. any help? Thanks
Bump! someone?
Uncheck auto-reboot in Odin and flash again.
If help below donĀ“t help flash CWM at the first of all and after that flash TWRP.zip
recovery is not seandroid enforcing i9505 resolved
Lennyz1988 said:
Uncheck auto-reboot in Odin and flash again.
Click to expand...
Click to collapse
same issue stuck on recovery is not seandroid enforcing i9505
I did your operations and :good::good::good:
Thank you so much !!! it works wahhhoo
Lennyz1988 said:
Uncheck auto-reboot in Odin and flash again.
Click to expand...
Click to collapse
+1, this solved it, thanks!
/closed
all.
I have an i9505 on 3 UK that has been rooted for over 6 months. I've been running the excellent TW based Echo Rom but wanted to try an ASOP rom but quickly wanted to revert.
I tried to restore my Nandroid but this failed and screwed up the phone (dont ask)so back to ODIN and i flashed back to stock 4.4.2 firmware for the UK via Sammobile (NG8)
Now back to square 1 so attempted to reroot with CF Autoroot again via ODIN. all show pass and i get the black screen on the phone with the red android logo and line stating stock recovery restored. I then used ODIN to flash Philz recovery again shown as Pass, however when i try to get into recovery i get some small white text on the bkack background that is there too briefly to read before the phone reboots as normal.
The Su superuser app is there but states the Su binary is outdated and the phone has no root access.
Ive read a few methods to get round this but they all seem to follow the same process ive tried a few times now.
The Rom for Echoe is auto root so id have thought if i could get to recovery somehow i could just flash this ?
Any one any views or have i screwed up for good ? .
You will be fine.
If you want to flash a custom rom anyway the shortest way would be to just flash the custom recovery. You don't need root for that.
Uncheck auto-reboot before you flash the recovery and it should work.
Lennyz1988 said:
You will be fine.
If you want to flash a custom rom anyway the shortest way would be to just flash the custom recovery. You don't need root for that.
Uncheck auto-reboot before you flash the recovery and it should work.
Click to expand...
Click to collapse
so i reflashed Philz recovery and unchecked auto reboot. This then gives me PASS in ODIN. I guess then i unplug and try and activate recovery - but still nothing...it just boots up normally ?
robinta said:
so i reflashed Philz recovery and unchecked auto reboot. This then gives me PASS in ODIN. I guess then i unplug and try and activate recovery - but still nothing...it just boots up normally ?
Click to expand...
Click to collapse
What is the model descriped when you are in download mode?
What is the exact version of Philz you are trying to flash?
Lennyz1988 said:
What is the model descriped when you are in download mode?
What is the exact version of Philz you are trying to flash?
Click to expand...
Click to collapse
GTI9505...(Bootloader i9505xxegng8)
Originally I tried philz_touch_5.15.8-i9505.tar.md5
and then updated to philz_touch_6.23.9-i9505.tar.md5 with no avail.
Try redownloading it. If you say that if passes, then it should just work.
If it still fails then try TWRP. Uncheck auto-reboot before flashing.
Could it be connected to me flashing a generic unlocked UK firmware on a 3 UK handset ?
That's sorted it ! Flashed CWM recovery and am now running Echoes v28.
Thanks for the help. I was really panicking for a while.
I wont be changing roms for a while but I guess if I did I won't lose root ?
Hi guys! I need help! I have a Samsung Galaxy S5 (sm-g900h) and everytime I flash the CF Auto Root file (CF-Auto-Root-k3g-k3gxx-smg900h.tar.md5) using Odin, I always end up in bootloop. I always fix this problem by flashing the stock rom. I don't know what is the problem but any solution will be helpful. Thanks in Advance :good::fingers-crossed:
jbsabado28 said:
Hi guys! I need help! I have a Samsung Galaxy S5 (sm-g900h) and everytime I flash the CF Auto Root file (CF-Auto-Root-k3g-k3gxx-smg900h.tar.md5) using Odin, I always end up in bootloop. I always fix this problem by flashing the stock rom. I don't know what is the problem but any solution will be helpful. Thanks in Advance :good::fingers-crossed:
Click to expand...
Click to collapse
did you enable usb debugging ? and maybe try to uncheck the auto reboot at odin and after you flash and pass , just removed your battery a while then plug it again then turn it on...
i use the same file for root but it's work and for some user it's cause bootloop....
You don't need USB debugging enabled for CF AR
--
OP - Try this
http://forum.xda-developers.com/galaxy-s5/help/root-sm-g900h-android-5-0-t3291620
I enable usb debugging. I also tried to flash with auto reboot unchecked, but whenever i boot it to recovery mode i always end up stuck in samsung logo with powered by android under it.
USB Debugging is only for when you are booted into Android, not for download mode
I'll try the link that you sent me. Thanks for the reply ?
*Detection* said:
USB Debugging is only for when you are booted into Android, not for download mode
Click to expand...
Click to collapse
Before I started rooting, I tried flashing cwm custom recovery but no luck. I can't boot to stock recovery. I waited for 30sec but it just stay in samsung logo with powered by android under it. Please help..
Why you trying to boot into stock recovery?
Flash a stock ROM again, then follow the instructions on the link I posted
Start here
http://forum.xda-developers.com/showpost.php?p=64771853&postcount=3
I disable USB debugging then tried flashing TWRP recovery via Odin. After flashing, I remove the battery then boot into the recovery and waited for 30 seconds but the phone is still stuck with the samsung logo. I will try to clean flash stock recovery and try flashing again the custom recovery.
*Detection* said:
Why you trying to boot into stock recovery?
Flash a stock ROM again, then follow the instructions on the link I posted
Start here
http://forum.xda-developers.com/showpost.php?p=64771853&postcount=3
Click to expand...
Click to collapse
I successfully flashed CWM recovery but the problem is, the recovery can't detect my storage. Internal nor external. What seems to be the problem this time? :crying:
You flashed CWM instead of TWRP like the link I posted told you to do
*Detection* said:
You flashed CWM instead of TWRP like the link I posted told you to do
Click to expand...
Click to collapse
THANKS TO YOU!
Somehow, i've managed to root it using CWM recovery. What's the difference though?
TWRP is much more powerful
*Detection* said:
TWRP is much more powerful
Click to expand...
Click to collapse
Yes for G900H TWRP better than cwm
Hi i need help with twrp from mygalaxya. When i do ap on odin and i select the twrp it says "md5 error binary is invalid" why?
gigxmark said:
Hi i need help with twrp from mygalaxya. When i do ap on odin and i select the twrp it says "md5 error binary is invalid" why?
Click to expand...
Click to collapse
perhaps the file is corrupted,i have had the same issue and dl another file and it's ok
try this onehttps://www.androidfilehost.com/?w=file-thanks&fid=24269982086992212&mid=97&download_id=rvfmtpn30ij5btnu0g3hc0r2a6&tid=1473694567&hc=1d0c9de416ddc45365e45fce7c9b29580ae899c13d7cfd7573a36a07
dabenaute said:
perhaps the file is corrupted,i have had the same issue and dl another file and it's ok
try this onehttps://www.androidfilehost.com/?w=...dc45365e45fce7c9b29580ae899c13d7cfd7573a36a07
Click to expand...
Click to collapse
Thanks man
gigxmark said:
Thanks man
Click to expand...
Click to collapse
my pleasure
dabenaute said:
my pleasure
Click to expand...
Click to collapse
man i ve just flash the twrp with odin but when i reboot in recovery there is the stock recovery why?
i ve reflash and nothing but the phone boot up normally
gigxmark said:
man i ve just flash the twrp with odin but when i reboot in recovery there is the stock recovery why?
i ve reflash and nothing but the phone boot up normally
Click to expand...
Click to collapse
Stock recovery has a defense mechanism to reflash it back.
You need to untick Auto-Reboot in Odin.
That being said, the phone wont just leave download mode, you have to do it yourself with Volume Down + Power for like 10 seconds (it will power off, so release your fingers when it's off ). This is a life saver for phones that dont have a removable battery.
Ah ok thanks i will try
PlutoDelic said:
Stock recovery has a defense mechanism to reflash it back.
You need to untick Auto-Reboot in Odin.
That being said, the phone wont just leave download mode, you have to do it yourself with Volume Down + Power for like 10 seconds (it will power off, so release your fingers when it's off ). This is a life saver for phones that dont have a removable battery.
Click to expand...
Click to collapse
i tryed as you tell me but nothing
Is Odin reporting the flash successful? Does it PASS in the end?
Also, are you restarting the download mode after the flashes fail?
It's pointless to retry a flash if it fails in a single session at Download Mode, after the first flash, the phone and odin communication behave weirdly.
PlutoDelic said:
Is Odin reporting the flash successful? Does it PASS in the end?
Also, are you restarting the download mode after the flashes fail?
It's pointless to retry a flash if it fails in a single session at Download Mode, after the first flash, the phone and odin communication behave weirdly.
Click to expand...
Click to collapse
Odin report that the flash is successfull
So?
can you try a different TWRP, the 2.8.x one?
PlutoDelic said:
can you try a different TWRP, the 2.8.x one?
Click to expand...
Click to collapse
Wich? I flash the 2.8.7 of mygalaxya
Just change to a different one, if you tried 2.8, try 3.0 this time.
PlutoDelic said:
Just change to a different one, if you tried 2.8, try 3.0 this time.
Click to expand...
Click to collapse
But the 3.0 is for flashing on flashify and i don t have the root because i have a marshmallow bootloader and i must flash before the twrp and next i flash the supersu zip and this twrp is adapt dor my A5 and i don t know what will happen if i flash another twrp as you say the 3.0
http://forum.xda-developers.com/sam...overy-samsung-galaxy-a52015-sm-a500f-t3360802
That is not what i am reading. You can flash it through Odin, as it says on the instructions.
PlutoDelic said:
http://forum.xda-developers.com/sam...overy-samsung-galaxy-a52015-sm-a500f-t3360802
That is not what i am reading. You can flash it through Odin, as it says on the instructions.
Click to expand...
Click to collapse
Yes because i flash another twrp i will try with this tomorrow and i will tell here if works and thanks again
PlutoDelic said:
http://forum.xda-developers.com/sam...overy-samsung-galaxy-a52015-sm-a500f-t3360802
That is not what i am reading. You can flash it through Odin, as it says on the instructions.
Click to expand...
Click to collapse
i resolved the problem now i flashed the twrp and did the root thanks a lot
Man why i didn't have the root if i flashed the supersu zip? supersu says that i am not on root how to do?
Hi guys
Just got a brand new, G935F S7, would like to root and install custom recovery to install the dream S8 Port.
https://forum.xda-developers.com/s7-edge/development/root-proton-x-1-0-t3497772
I looked around, but found a few different versions of recovery and rooting options.
Is there a link i can jump to for the easiest, less risk way?
I have SM-G935F (Black Onix) and i have TWRP+Root and Custom ROM
Download:
TWRP -> Twrp-3.0.2-4-hero2lte.img.tar
Odin -> Odin
1. activate developer mode on the current system and turn on the option 'enable OEM
2. reboot phone mode to 'download mode' and flash using Odin (position AP) TWRP recovery [ATTENTION you must turn off autoreboot options in odin and after flash manually reboot the phone into recovery mode]
3. You can flash SuperSU or if you want custom rom with root:
3.1 go to options and select wipe data format - write "yes" then after finishing wipe necessarily restart phone to recovery mode [ATTENTION this operation will clear the memory of the phone without touching the data contained on the ex-scdard]
3.2 flash in the recovery file no-verity-opt-encrypt-2.2.zip
3.3 reboot phone to recovery mode
3.4 Flash your favorite rom and wait for boot up I recommend Ambasadii ROM..
Have a good day
Talentooman said:
I have SM-G935F (Black Onix) and i have TWRP+Root and Custom ROM
Download:
TWRP -> Twrp-3.0.2-4-hero2lte.img.tar
Odin -> Odin
1. activate developer mode on the current system and turn on the option 'enable OEM
2. reboot phone mode to 'download mode' and flash using Odin (position AP) TWRP recovery [ATTENTION you must turn off autoreboot options in odin and after flash manually reboot the phone into recovery mode]
3. You can flash SuperSU or if you want custom rom with root:
3.1 go to options and select wipe data format - write "yes" then after finishing wipe necessarily restart phone to recovery mode [ATTENTION this operation will clear the memory of the phone without touching the data contained on the ex-scdard]
3.2 flash in the recovery file no-verity-opt-encrypt-2.2.zip
3.3 reboot phone to recovery mode
3.4 Flash your favorite rom and wait for boot up I recommend Ambasadii ROM..
Have a good day
Click to expand...
Click to collapse
Hi there!
Thank you very much. I saw this one, just wanted confirmation, will use this steps
^^rac said:
Hi there!
Thank you very much. I saw this one, just wanted confirmation, will use this steps
Click to expand...
Click to collapse
If you need any help you can contact me, have a nice day
Talentooman said:
If you need any help you can contact me, have a nice day
Click to expand...
Click to collapse
HI there
I did all steps, everything went fine, flashed the Dream rom from 6.0.1 but no only showing samsung logo? Not booting?
^^rac said:
HI there
I did all steps, everything went fine, flashed the Dream rom from 6.0.1 but no only showing samsung logo? Not booting?
Click to expand...
Click to collapse
its depends. I never use Dream rom.
Try to download Ambasadii rom, if works then its problem in rom..
Did you update bootloader and modem?
Talentooman said:
its depends. I never use Dream rom.
Try to download Ambasadii rom, if works then its problem in rom..
Did you update bootloader and modem?
Click to expand...
Click to collapse
I no, where would i get the correct bootloader and modem?
^^rac said:
I no, where would i get the correct bootloader and modem?
Click to expand...
Click to collapse
Dont know honestly, i update with aroma in my rom
Try to download nougat firmware, flash it with odin and then flash your rom
Talentooman said:
Dont know honestly, i update with aroma in my rom
Try to download nougat firmware, flash it with odin and then flash your rom
Click to expand...
Click to collapse
Thank you very much! I got it back up, i had to format the data in TWRP, reflashed the rom, and it started
Thanks for the help :good:
Talentooman said:
I have SM-G935F (Black Onix) and i have TWRP+Root and Custom ROM
Download:
TWRP -> Twrp-3.0.2-4-hero2lte.img.tar
Odin -> Odin
1. activate developer mode on the current system and turn on the option 'enable OEM
2. reboot phone mode to 'download mode' and flash using Odin (position AP) TWRP recovery [ATTENTION you must turn off autoreboot options in odin and after flash manually reboot the phone into recovery mode]
3. You can flash SuperSU or if you want custom rom with root:
3.1 go to options and select wipe data format - write "yes" then after finishing wipe necessarily restart phone to recovery mode [ATTENTION this operation will clear the memory of the phone without touching the data contained on the ex-scdard]
3.2 flash in the recovery file no-verity-opt-encrypt-2.2.zip
3.3 reboot phone to recovery mode
3.4 Flash your favorite rom and wait for boot up I recommend Ambasadii ROM..
Have a good day
Click to expand...
Click to collapse
hi, @Talentooman
is there any way to FAST fix "Custom Binary Blocked by FRP Lock S7 Edge" after I have deleted root from supersu menu and off oem unlock?
I found this https://www.youtube.com/watch?v=512_HFD3USk
And one more question^ is there any way to install magisk after supersu?
Thanks.
eee3+ said:
hi, @Talentooman
is there any way to FAST fix "Custom Binary Blocked by FRP Lock S7 Edge" after I have deleted root from supersu menu and off oem unlock?
I found this https://www.youtube.com/watch?v=512_HFD3USk
And one more question^ is there any way to install magisk after supersu?
Thanks.
Click to expand...
Click to collapse
SOLVED
I had try again with, and i can has normally,
1. Pres Vol -, Power and home 7second,
2. System will boot odin,
3. Install Stock Firmware,
4. Switch on Developer Mode & OEM Unlocking
5. Download FRP unlock bypass APK
6. Restart the phone,
7. Now you can Install Costum Again
Thank You,,,,