I accidentally froze all apps (even the launcher) by Titanium backup and now my Samsung Galaxy Grand prime G530H cannot boot up. It stops at Samsung animation logo. I can only access the TWRP recovery. Can somebody show me how to defrost all apps in TWRP recovery and likewise?
Thank you so much!
If you don't have a backup of your system partition, your going to have to reflash a rom via Odin I think, you shouldn't loose any personal data like contacts and photos, but you will need to reflash twrp and root again.
Related
Hi,
I have TWRP backup from which i can easily restore System and Boot but Data fails to restore.
I have tried Titanium Backup, nandroid manager as well, still nothing. I am on twrp 2.6.3.3 recovery and it says failed, doesnt show any error on the terminal.
I made the backup using 2.6.3.0 multiboot recovery.
Please help, i have some very important apps and data on there :crying:
Device: Samsung Galaxy S4 (SGH-I337M)
Android:5.0.1
Rooted
cwm custom recovery touch version.
When I do a Nandroid backup it seems to do successfully but I see errors in the log file.
And when I restore using the same backup after it finishes restore process, all the services stop working (example: google.app ....)
I attach screenshots and log file for backup process.
Please explain why this is happening and how to fix it.
Thanks
Sam
____________
As lennyz & Reaper suggested I switched to twrp, both backup and restore are working smoothly.
Thanks for help.
CWM isn't updated anymore. So you should either swith to TWRP or Philz (thought Philz isn't updated anymore either but it still works).
Maybe that could fix it. Also make sure you have plenty of space left when you make a nandroid. Something like 5gb when you are on TW rom.
Use PhilZ, as it is based on CMW, so it should work with your backups. If you don't care about the backups anymore then go with TWRP. Haven't had any problems with TWRP so far.
Hello,
before I played around with getting root and flashing custom roms, I backup everything in Samsung Smart Switch.
After getting root and install TWRP, I backup the whole system (except the recovery partition) to the external sd-card from TWRP.
Now - after getting some experience with custom roms - I will go back to the stock rom from my TWRP-Backup. Set everything to factory default, wipe cache and dalvik and press restore. Select my backup... swipe to flash... everything seems ok. After reboot - no bootloop - a thousands of alert-messages pops up "blabla-app stopped"... Then appears only a black screen.
How can i restore my backup from TWRP? Or is there a stock-rom, so i can backup from smart switch? My System is a LRX21T.G900FXXU1BOJ1
Thanks alot!
Try clearing the caches from recovery and boot again
If it fails, try wiping everything again, then restore all partitions except DATA
See if it boots
If it boots - either reinstall apps etc manually, or use TiBu to restore the DATA partition
I've got it!
I flashed a stock rom with odin and restore with smart switch. Some settings are missing, but i think 90% is restored
Nice job
I just got a s5. And I got it succesfully rooted and also got TWRP working on it.
All the data from my previous phone was transfered to the s5.
Now I made some backups with TWRP with the default settings: Partitions boot, system and data.
With the backups in mind I was thinking I could easily restore it to a previous state.
Thinking I backed up all the data and wanted to make it fresh again, I wanted to restore it.
In the menu I chose the restore option with the same settings as the backup: Partitions boot, system and data.
And it gives a message restoring system succesfull.
But when rebooting, it keeps hanging and at the moment of loading the android system every bit of the system keeps 'hanging'
It keeps saying
'Unfortunately touchwiz startup unsuccesfully'
'Unfortunately youtube startup unsuccesfully'
'Unfortunately greenify startup unsuccesfully'
'Unfortunately app whatever startup unsuccesfully'
And so on and so on
Eventually it starts with a black screen with nothing loaded. Complete blackout.
So this backup doesn't work. And I try my second backup.
Unfortunately also the second backup gave these errors.
And also the third backup!
So the backup files seem the right size, it's some gigabytes, and it alway's keeps saying backup/restore succesfully.
But now it fails to restore and boot the backup
The things I tried.
-Trying three different backups
-Wiping cleaning data/dalvik/cache etc etc
-Restoring a part of the backup. First system, then data, then boot, no succes.
So i'm totally lost! Does somebody know how to fix this? Or have some tips to try??
You can't restore system and boot from a different model phone
That would be like trying to flash a ROM for one model phone to another without porting it
If it was an S5 you backed up, was it the exact same model (ie: G900F etc?)
Flash back to stock, then try restoring only DATA
Or use TiBu to restore your apps from the TWRP backup
*Detection* said:
You can't restore system and boot from a different model phone
That would be like trying to flash a ROM for one model phone to another without porting it
If it was an S5 you backed up, was it the exact same model (ie: G900F etc?)
Flash back to stock, then try restoring only DATA
Or use TiBu to restore your apps from the TWRP backup
Click to expand...
Click to collapse
Thanks for the reply! It was a backup and restore on the same phone. So that is why I thought it was supposed to be a easy restore.
But I found the solution hidden somewhere in one message on XDA:
"Originally Posted by Dr. Fed
Would you happen to know why, when restoring a TW 4.4.2 nandroid using TWRP 2.8.1 or 2.8.4, after running an AOSP lollipop ROM like CM12, the TW ROM boots but then the whole system force-closes? Before restoring the nandroid, I advance wipe system, data, cache, and dalvik. Then I restore the nandroid. It boots, but then some daemon crashes. Then all processes and apps. The screen goes black after a few crashes.
So, what I do is pull out the battery, boot into recovery, advance wipe system, data, cache, dalvik, flash a CM11 ROM, reboot. I let CM11 start up, skip the set-up, then I boot back to TWRP (2.8.1 and now 2.8.4), advanced wipe, restore TW nandroid, and now it works just fine.
It seems like TWRP doesn't fully wipe."
Here the steps for if other people will run into the same problem:
Problem: Android 5 is running, with twrp 2.7 performed a back up = Restoring the backup is difficult because it problably doesn't do a clean wipe somehow.
1. I downloaded a cyanogen 11 rom, a Android 4 version.
2. Installed it with TWRP. Somehow it 'wipes' it more efficiently.
3. From cyanogen 11 back to booting TWRP.
4. In TWRP trying the Android 5 restore.
And Amazingly this worked!! = Celebrate!!
chokolademan said:
Thanks for the reply! It was a backup and restore on the same phone.
Click to expand...
Click to collapse
Confused me with this line
chokolademan said:
All the data from my previous phone was transfered to the s5.
Click to expand...
Click to collapse
Good to see you solved it
Hi experts,
I would very much appreciate some help regarding the following:
I have a Samsung Galaxy S5 SM-G900F with factory installed stock rom G900FXXU1BPA2 (Android 5.0). I used the SkipSoft Unified Android Toolkit 1.4.5 to root the phone and install TWRP recovery (2.7.1.0-klte as recommended by Unified Android Toolkit). I made a first Nandroid Backup and was able to successfully restore this backup (I restored boot, system and data to verify that Nandroid restore works). I then used Titanium Backup to restore my apps from another phone, and all was well.
A week or so later I wanted to modify something I wasn't sure I wanted to keep (using apktool). I therefore made a second Nandroid backup and then proceeded to make modifications to the phone. After I saw the result, I didn't like it, and therefore restored the second Nandroid backup. After rebooting, the phone gave a flurry of forced stops ("Unfortunately XXX has stopped"). It is not a bootloop but I can't do anything meaningful with the phone other than restart it.
To try and resolve this, I used TWRP to wipe cache and dalvik cache and rebooted. The phone went through the lengthy "Android is upgrading" process but the result was the same: all my apps force stop.
I then decided to try and restore the original first Nandroid backup (which I had been able to restore successfully earlier), and this resulted in the same issue. Since I have several backups of this first backup I was able to verify that the files were good. Also did MD5 checksum verification in TWRP and it all checked out.
Using Odin, I was able to restore a stock ROM from SamMobile (G900FXXU1BOL1_G900FOJK1BOL1_ILO) and after restart, the phone works as usual, but of course all my apps and data were gone.
I was then able to use TWRP to restore only boot and system from the second backup, so I would be back on the exact same ROM that my phone came with, and this worked just fine; the phone started as if factory restored.
I then used TWRP to restore only data, and this resulted again in the same problem: all apps force close. Note that this is a restore of data only to the same phone running the exact same ROM that the Nandroid backup was made on, and it still did not work.
I have been thinking about this issue and searching through the various forums but I did not find anyone having this same exact issue. Here are some questions I came up with:
1. Is TWRP 2.7.1.0 completely compatible with this phone and with Android 5.0? Would it help if I installed a newer version of TWRP? Would I be able to restore Nandroid backups made with TWRP 2.7.1.0 with TWRP 3.X?
2. Assuming my second Nandroid backup is not corrupt, is there a better (less intrusive) restore I can do of the apps? Can Titanium Backup read TWRP 2.7.1.0 backups and restore them, including SMS?
3. What could be the reason for TWRP 2.7.1.0 restore not to be working properly? I did activate the fingerprint reader after the first Nandroid Backup, but if that is the issue I would have expected that first backup (in which fingerprints were not yet enabled) to restore properly and it doesn't.
Would appreciate any help!
Thanks,
AH
That version of TWRP is pretty old, possible it doesn't fully support 5.0
Grab 3.0.0.0 from here (newer versions are not fully bug free yet)
https://dl.twrp.me/klte/
Flash .tar version with ODIN 3.10.7
TiBu can read Nandroid backups and restore apps yes
Not sure about SMS
The method you used to root and flash TWRP is not a usual method used here, most of us use ODIN to flash TWRP and then flash SuperSU from recovery
or use CF Auto Root to root, and then flash TWRP with ODIN
I'd flash stock again, factory reset, and then flash TWRP and SuperSU, then try restoring your apps with TiBu
*Detection* said:
That version of TWRP is pretty old, possible it doesn't fully support 5.0
Grab 3.0.0.0 from here (newer versions are not fully bug free yet)
dl.twrp.me/klte
Flash .tar version with ODIN 3.10.7
Click to expand...
Click to collapse
Thanks *Detection*! I installed TWRP 3.0.0.0 as per your instructions and restored just data. Same result as before.
Then I used TWRP 3.0.0.0 to restore the entire backup including system, boot, recovery, and data. Same result (of course I lost TWRP 3.0.0.0 and was back on TWRP 2.7.1.0).
This exercise was useful for one reason: I now know that TWRP 3.0.0.0 is able to read Nandroid backups from TWRP 2.7.1.0.
This is quite crazy but I seem to be unable to restore a full Nandroid backup and get a working system.
Am going to try Titanium Backup.
Thanks again!
AH