Related
Hello guys, I have a problem with this phone.
First I flashed the euro+fastboot kdz... The phone booted and worked awesome but It wasn't showing recovery or LG logo.
Somewhere on this forum I read that you had to flash v10c and then v20B to fix this.
I did so, v10c failed, but v20B flashed correctly, but it didn't boot up.
I'm still stuck here, the phone is completely dark, but when I connect it to the pc I can see it with ADB, It just doesn't go into fastboot mode (because of v20B I guess). But flashing the euro kdz won't work anymore, and I'm stuck in ADB without fastboot.
Hope you guys can help me,
Juxter.
Juxter said:
Hello guys, I have a problem with this phone.
First I flashed the euro+fastboot kdz... The phone booted and worked awesome but It wasn't showing recovery or LG logo.
Somewhere on this forum I read that you had to flash v10c and then v20B to fix this.
I did so, v10c failed, but v20B flashed correctly, but it didn't boot up.
I'm still stuck here, the phone is completely dark, but when I connect it to the pc I can see it with ADB, It just doesn't go into fastboot mode (because of v20B I guess). But flashing the euro kdz won't work anymore, and I'm stuck in ADB without fastboot.
Hope you guys can help me,
Juxter.
Click to expand...
Click to collapse
Try again.
First refer to this thread:
dont see recovery and boot logo - http://forum.xda-developers.com/showthread.php?t=825173
And the original post by: Feuerbard
#22 - http://forum.xda-developers.com/showpost.php?p=9457010&postcount=22
Thumbs up solution to get logo
solution from 4PDA
flash first french firmware _hxxp://csmg.lgmobile.com:9002/swdata/WEBSW/GT540/ANEUBK/V20a_00/V20A_00.kdz
(you must make kdz flasher fullscreen and change right option to CS_EMERGENCY)
dont boot android , remove accu reinsert them and press vol - and plug usb cable into port on mainboard - you must get in download mode )
flash firmware with fastboot (i use CIS _hxxp://narod.ru/disk/26675062000/V20B_00.kdz.html)
boot android and flash this firmware _hxxp://narod.ru/disk/25473801000/out.kdz.html
after this you must see all logo ( LG , Motion LG , Android )
after this flash firmware you like (custom fastboot e t с)
maybe some point is not needed but this tutorial work 100% and tested by myself
Click to expand...
Click to collapse
And the post by namco:
in post -- #45 - http://forum.xda-developers.com/showpost.php?p=10241289&postcount=45
namco said:
So after 4 5 6 or maybe 10 times, it will finally become working, that's what you're saying?
This is really odd, something's wrong with these phones lol
Okay, i'll load myself with a ton of patience and repeat the steps as per the instructions. This is *exactly* how i am doing it, with all the details:
1) Using the French v20A ROM - http://csmg.lgmobile.com:9002/swdata/WEBSW/GT540/ANEUBK/V20a_00/V20A_00.kdz and this Russian one - http://narod.ru/disk/25473801000/out.kdz.html
2) Take out the battery, SIM card and SD card
3) While holding the Vol - button, plug USB into phone so that the phone goes into Download Mode
4) Run the KDZ Updater, put it into CS_Emergency mode
5) Select the French V20A rom and flash it
6) When it's finished (immediately after the DOWNLOAD MODE letters vanish), i pull out the USB plug from the PC, so that the phone doesn't boot.
7) Again hold Vol - and reinsert USB to put the phone back in Download Mode
8) In KDZ Updater (still in CS_Emergency mode) select out.kdz and flash it
9) Let the phone boot into Android
At this point i STILL don't have a boot animation, should i keep doing this until i see one appear?
When it (if) finally appears, i just flash my own ROM, do a factory reset and it should stay that way, correct?
I guess my impossibility to access recovery mode also has something to do with this...
Click to expand...
Click to collapse
Note: For above step: 1) Using the French v20A ROM
-- as long as you have the ROM of v20 with fastboot option, it doesn't really matter.
================
For out.kdz file alternate download link by fisher:
#59 - http://forum.xda-developers.com/showpost.php?p=10426771&postcount=59
Originally Posted by fishears
Try this:
http://www.mediafire.com/?u2mhgrbva8dr5cm
================
Hope this helps.
Thanks for the reply, I actually fixed it following this:
hxxp://modaco.com/topic/329863-how-to-raise-gt540-from-the-dead/
Once I got fastboot with that cwm.kdz I reflashed a fastboot rom, and from that one I could use the KDZ updater again, following the French kdz procedure...
The phone now is fully working recovery and bootanimations again
So I am hoping someone can help me here.
I was attempting to install Cloudy G3 (1.3) on my phone and did the following things from stock 4.4.2.
1. Root using ioroot (Success)
2. Installed CWM semi touch recovery (somehow the chinese one got installed rather than english)
3. Used an app to boot me into recovery as the manual method was not working for me.
4. The chinese recovery opened up (to my surprise) and so after reading translations, i pressed restart.
5. Phone now stuck on LG screen with flashing LED.
Progress:
I have figured out that I can get to the chinese recovery by holding Power + Volume up for 5 seconds. Weird because I though you were meant to hold volume down??
I then tried flashing Cloudy G3 form my SD card by using the normal process
-Wipe cache,data,dalvik
-Install KK baseband zip
-Install Cloudy rom zip (Aroma setup works and I can go through and select all the things i want and the rom does install)
-reboot after finished installing
Now the phone boots with lg logo, goes black, goes to lg logo again and then goes into recovery all by itself without me touching volume buttons.
I am trying to go back to stock but the computer won't recognise my phone in download mode
my download mode just stays on this screen.
Needing help with this please!
Maybe there is a solution without using my comupter?
I will play around with uninstalling/ re-installing drivers this weekend.
I have tried a windows 7 and 8 PC.
I have the same problem from exactly the same process. Have you had any progress?
jenz25 said:
I have the same problem from exactly the same process. Have you had any progress?
Click to expand...
Click to collapse
solution 1 http://forum.xda-developers.com/showpost.php?p=54559526&postcount=1052
solution 2 (if twrp or cwm still exist) http://forum.xda-developers.com/showthread.php?t=2694530 download fx22.zip but you need change file inside that zip with file from solution 1, flash it and ur phone should be detected on download mode.
good luck
hyperionx7 said:
solution 1 http://forum.xda-developers.com/showpost.php?p=54559526&postcount=1052
solution 2 (if twrp or cwm still exist) http://forum.xda-developers.com/showthread.php?t=2694530 download fx22.zip but you need change file inside that zip with file from solution 1, flash it and ur phone should be detected on download mode.
good luck
Click to expand...
Click to collapse
Hi, thanks for your response. I have downloaded both files.I want to go with solution 2. However, I'm quite confused which file inside the zip on solution 2 I would need to replace with the file in solution one.
jenz25 said:
Hi, thanks for your response. I have downloaded both files.I want to go with solution 2. However, I'm quite confused which file inside the zip on solution 2 I would need to replace with the file in solution one.
Click to expand...
Click to collapse
just extract file from first one and rename it same like file from fx22.zip
replace content fx22.zip with that modified file with winrar or 7zip (just simple drag n drop)
put on usb flashdisk drive using usb OTG or adb sideload and flash it
Sorry, but the file from Solution 1 (zip file) contain the following:
cygwin1.dll
dd
mmcblk0p2_sbl1
mmcblk0p5_aboot
mmcblk0p6_rpm
mmcblk0p8_tz
mmcblk0p15_recovery
recover_partition
Which one should I transfer to the file on solution 2?
---------- Post added at 12:11 PM ---------- Previous post was at 11:52 AM ----------
OMG! It works now! Thanks Man! I would kiss you right now. )
pc does not recognize g2 in download mode
HI, i need help, I have Lg G2 D800. It is stuck in bootloop. It Hangs on LG logo screen with a blinking led. i can go to download mode but the pc just does not recognize the phone (drivers are installed)... if i connected and turn on the phone by normal way it gets stuck at lg logo but the pc recognize it, but if i connected in download mode does not recongnized! ( i need the pc recognized the g2 in download mode for using lg flash tool in orden to flash .tot stock firmware) any fix?? thanks
I have tried a windows 7 and 8 PC.
[email protected] said:
HI, i need help, I have Lg G2 D800. It is stuck in bootloop. It Hangs on LG logo screen with a blinking led. i can go to download mode but the pc just does not recognize the phone (drivers are installed)... if i connected and turn on the phone by normal way it gets stuck at lg logo but the pc recognize it, but if i connected in download mode does not recongnized! ( i need the pc recognized the g2 in download mode for using lg flash tool in orden to flash .tot stock firmware) any fix?? thanks
I have tried a windows 7 and 8 PC.
Click to expand...
Click to collapse
hi, did you solved your issue because i am in the same boat as you
hyperionx7 said:
solution 1 http://forum.xda-developers.com/showpost.php?p=54559526&postcount=1052
solution 2 (if twrp or cwm still exist) http://forum.xda-developers.com/showthread.php?t=2694530 download fx22.zip but you need change file inside that zip with file from solution 1, flash it and ur phone should be detected on download mode.
good luck
Click to expand...
Click to collapse
This seems promising, but how do I transfer it over to my LG?
Hello, today i tried to flash from recovery this lollipop zip: http://forum.xda-developers.com/lg-g2/development-d802/rom-stock-30d-flashable-zip-t3070383 and flashed immediately TWRP also.
Now when i boot up the device I get a critical demigod error screen from which I can enter Download mode.
So i tried to install v30a .kdzwith flashtool but the installation fails...
Any suggestions? D:
I can only get to download mode, the phone is correctly recognized from the pc and LG Mobile Support Tools sees the device but with SW OPTIMUSG3 1.4.1 (the rom i had when I flashed Lollipop)!
diegz said:
Hello, today i tried to flash from recovery this lollipop zip: http://forum.xda-developers.com/lg-g2/development-d802/rom-stock-30d-flashable-zip-t3070383 and flashed immediately TWRP also.
Now when i boot up the device I get a critical demigod error screen from which I can enter Download mode.
So i tried to install v30a .kdzwith flashtool but the installation fails...
Any suggestions? D:
I can only get to download mode, the phone is correctly recognized from the pc and LG Mobile Support Tools sees the device but with SW OPTIMUSG3 1.4.1 (the rom i had when I flashed Lollipop)!
Click to expand...
Click to collapse
tried lg flash tool? what error you get it stops 2%?
can you reboot recovery with keys or some kind of adb reboot recovery?
OverClockeD_GR said:
tried lg flash tool? what error you get it stops 2%?
can you reboot recovery with keys or some kind of adb reboot recovery?
Click to expand...
Click to collapse
Thanks for the reply!
It stops at 2% and i get the error in the image.
I tried with 30a, 20h and 20f :/
It's a pain mainly because it's my only phone!
diegz said:
Thanks for the reply!
It stops at 2% and i get the error in the image.
I tried with 30a, 20h and 20f :/
It's a pain mainly because it's my only phone!
Click to expand...
Click to collapse
ye i had this problem when tried to kdz from optimusg3...cause phone recognized not as d802 i think.. i flashed a stock rom zip format throught recovery and after i was able to flash kdz..
can you try this
http://forum.xda-developers.com/lg-g2/development-d802/fix-lg-flash-tool-stuck-2-t3031112
if you enter recovery mode somehow then its easy just flash a stock rom
or just flash a rom with tot methode
OverClockeD_GR said:
ye i had this problem when tried to kdz from optimusg3...cause phone recognized not as d802 i think.. i flashed a stock rom zip format throught recovery and after i was able to flash kdz..
can you try this
http://forum.xda-developers.com/lg-g2/development-d802/fix-lg-flash-tool-stuck-2-t3031112
if you enter recovery mode somehow then its easy just flash a stock rom
or just flash a rom with tot methode
Click to expand...
Click to collapse
I can only go to download mode and the adb seems to not recognize the device from there
diegz said:
I can only go to download mode and the adb seems to not recognize the device from there
Click to expand...
Click to collapse
As said above, you should try .tot method; I was like you, .kdz didn"t work, but .tot method works perfectly. You'll be on 4.2.2, 'cause .tot method only support 4.2.2 version of android on D802, but you can upgrade after with .zip rom or re-try .kdz method.
Check second part of this tutorial : http://forum.xda-developers.com/showthread.php?t=2432476 ( "2015 (updated with pictures) TOT method" ).
Yeah, final thing: if, after .tot method you're stuck in bootloop, factory reset your phone (power off, then volum down + power key, wait for LG logo, release buttons, then volum down + power key again, and your phone should work like a charm). Let us know if it work!
casual_kikoo said:
As said above, you should try .tot method; I was like you, .kdz didn"t work, but .tot method works perfectly. You'll be on 4.2.2, 'cause .tot method only support 4.2.2 version of android on D802, but you can upgrade after with .zip rom or re-try .kdz method.
Check second part of this tutorial : http://forum.xda-developers.com/showthread.php?t=2432476 ( "2015 (updated with pictures) TOT method" ).
Yeah, final thing: if, after .tot method you're stuck in bootloop, factory reset your phone (power off, then volum down + power key, wait for LG logo, release buttons, then volum down + power key again, and your phone should work like a charm). Let us know if it work!
Click to expand...
Click to collapse
Trying the tot method...
But can't even do the factory reset cause as soon as the LG logo appears I get the critical error!
diegz said:
Trying the tot method...
But can't even do the factory reset cause as soon as the LG logo appears I get the critical error!
Click to expand...
Click to collapse
do tot methot and it wil work follow this instructions get the tot files and the right dll i copy paste from a guy that had optimus and worked like this on him
"My problem was the infamous 2% bug with the KDZ. I think reason for this is the wrong device ID set in the 'build.prop' by the G3 rom for the G2. The flash tool expects a G2 but sees a G3.
I did not find a workaround for this BUT there is one for the TOT method. You will need:
- LGUnitedMobileDriver_S51MAN312AP22_ML_WHQL_Ver_3.1 2.3.exe (version does not matter)
- Setup_LGFlashTool_1.8.1.1023.exe - for flashing of a TOT
- LGUP_8974.dll - this is needed for the flash tool to accept all TOTs
- the right TOT for your device
Please google these, I just checked and found them all. You can also find instructions for them.
Install drivers and LGFlashTool then start it.
Start smartphone in download mode by holding the volume up key while plugging USB in PC. Phone must be off.
Wait for the device recognition then change COM port of the new device in Windows device manager to something between 41-56 so that the flash tool can find the phone. In the model config window of the flash tool select the 'manual mode' then enter the path to the downloaded LGUP_8974.dll in 'DLL' and the path to your TOT file in 'S/W'. Set 'Action mode' to 'BOARD DL' then press 'OK'.
Your phone should be shown on selected COM port. Now you can press Start (the arrow).
OverClockeD_GR said:
do tot methot and it wil work follow this instructions get the tot files and the right dll i copy paste from a guy that had optimus and worked like this on him
"My problem was the infamous 2% bug with the KDZ. I think reason for this is the wrong device ID set in the 'build.prop' by the G3 rom for the G2. The flash tool expects a G2 but sees a G3.
I did not find a workaround for this BUT there is one for the TOT method. You will need:
- LGUnitedMobileDriver_S51MAN312AP22_ML_WHQL_Ver_3.1 2.3.exe (version does not matter)
- Setup_LGFlashTool_1.8.1.1023.exe - for flashing of a TOT
- LGUP_8974.dll - this is needed for the flash tool to accept all TOTs
- the right TOT for your device
Please google these, I just checked and found them all. You can also find instructions for them.
Install drivers and LGFlashTool then start it.
Start smartphone in download mode by holding the volume up key while plugging USB in PC. Phone must be off.
Wait for the device recognition then change COM port of the new device in Windows device manager to something between 41-56 so that the flash tool can find the phone. In the model config window of the flash tool select the 'manual mode' then enter the path to the downloaded LGUP_8974.dll in 'DLL' and the path to your TOT file in 'S/W'. Set 'Action mode' to 'BOARD DL' then press 'OK'.
Your phone should be shown on selected COM port. Now you can press Start (the arrow).
Click to expand...
Click to collapse
Ok downloaded all the files except the .tot. I found THIS but they are .exe :/ should i change the file type once downloaded? (I'm downloading v10a)
Thanks for the help guys!
diegz said:
Ok downloaded all the files except the .tot. I found THIS but they are .exe :/ should i change the file type once downloaded? (I'm downloading v10a)
Thanks for the help guys!
Click to expand...
Click to collapse
No, do not rename file; it's .exe BUT when you'll double-click on it, it gonna launch winrar automatically; I was "scared" too, but it works pretty good don't worry. (Sorry I'm late, but I'm french, and there is jetlag between you and me...)
casual_kikoo said:
No, do not rename file; it's .exe BUT when you'll double-click on it, it gonna launch winrar automatically; I was "scared" too, but it works pretty good don't worry. (Sorry I'm late, but I'm french, and there is jetlag between you and me...)
Click to expand...
Click to collapse
Ok guys! The TOT method worked Then I flashed v30a kdz and it works perfectly!
As you said the problem was that flashtool didn't recognise the G2 (probably it saw it as G3) so it keeps stopping at 2%.
Thank you all for the help :highfive:
Ps no jetlag I'm from Italy ;p
diegz said:
Ok guys! The TOT method worked Then I flashed v30a kdz and it works perfectly!
As you said the problem was that flashtool didn't recognise the G2 (probably it saw it as G3) so it keeps stopping at 2%.
Thank you all for the help :highfive:
Ps no jetlag I'm from Italy ;p
Click to expand...
Click to collapse
My mistake ! Happy for you!
@diegz, what variant of LG G2 do you have? International? I'm planning to flash the 30A 32gb Italy variant on my G2 international. Just want a quick reference before I flash. Sorry for the OT.
@happiness4u i'm on 16gb D802! It's a great update if you ask me
diegz said:
@happiness4u i'm on 16gb D802! It's a great update if you ask me
Click to expand...
Click to collapse
Thanks for the heads up. Gonna try this out in a moment. +1 added.
Hello
i have a tablet
i wanted root this device using tutorial in this forum, but i not success and now tablet stuck on asus logo,
now kindly let me know how i can install firmware? i download firmware from asus website, but there is no way i install it,
also there is no factory reset in boot menu.
i need your help, kindly please help me.
thanks.
any update?
Maybe firmware service help?
3245 said:
Hello
i have a tablet zenpad 10(z300cl),
i wanted root this device using tutorial in this forum, but i not success and now tablet stuck on asus logo,
now kindly let me know how i can install firmware? i download firmware from asus website, but there is no way i install it,
also there is no factory reset in boot menu.
i need your help, kindly please help me.
thanks.
Click to expand...
Click to collapse
In links remove spaces!
Instructions (Russian, try to translate through Google)
4pda . ru/ forum/index.php?showtopic=724206&st=20#entry46980645
Download
yadi . sk / d /EN4IhDFxqFVXB
try this way
try this way.....
1.Download Intel USB Driver For Android Devices and install it
2.download THIS
3.Go to "DROIDBOOT" (turn off tablet,press power+vol up together till u enter it!)
4.copy your-firmware.zip file you have downloaded to extracted folder u download at step 2.
5.open "OPEN.cmd" and enter this:
Code:
Code:
fastboot flash update [I]your-firmware.zip[/I]
Hi~ guys, I am an android phone user from China who bought LG G4 Japanese Edition [LG isai vivid V32] last month.
After delete "google play service" in system, then reboot, but the device shows [Security Error Authentication Fail #9]
and automatic started again and again, Ops~ device bricked, GG! :crying:
As we know the resources and softwares are not friendly to LG isai vivid V32, the Firmware is also rare, cos I can't find any tip for LG V32 in XDA,
So it is more difficult for us to save the bricked device.
Due to the [Recovery Mode] still can't solve this problem, here we need to use TOT Firmware to go back to stock,
KDZ is also available to reflash, cos I didn't get the KDZ Files, so I choose TOT to reflash my device.
If your LG V32 device have bootloop or stuck on LG Logo, this method would also help you out.
Now Let me tell you the TOT Method to unbrick your LG isai vivid V32.
Before reflash firmware, you need to download the things below:
1)Download the driver
--[LGUnitedMobileDriver_S52MAN314AP22_ML_WHQL_Ver_3.14.1.exe]
2)Download Both TOT File & DLL File:
--LGV32HL-04-V10o-440-51-OCT-13-2015+0.tot
--LGFLASH_LG_G4_CODEFIRE.dll
3)Download flashtool
--[Setup_LGFlashTool_1.8.1.1023.exe]
4)Download Megalock
--[Megalock.dll]
( I am a new user, due to the policy of XDA forums, so I can not posting outside links,
the softwares which are metioned above, you could google it then download)
Install:
1. Install LGUnitedMobileDriver
2. Install LGFlashtool to C:\
3. Don’t run Flashtool at first, cos you will find that is locked
4. Copy [MegaLock.dll] file to C:\LG\LGFlashtool,
Replace the old MegaLock.dll file to unlock.
5. Extract the TOT file from the Zip,ready for using.
6. Ensure the softwares would work, restart your Windows.
1. Download Mode/Firmware Update
1)power off device
2)press and hold [Vol+] then plug USB cable on connect to pc
3)device shows [Download Mode]
2. Change COM port to 41
1)go to Windows [Device Manager]
2)double click [LGE Mobile USB Serial Port] and tap to [Advanced]
3)change the COM Port to COM 41 then click ok.
4)unplug USB cable but keep device in Download Mode.
3. Import the Firmware
1)Run LG Flashtool
2)in the tool you can see [Model Config]
3)select [Manual Mode],select .dll in files, select TOT Firmware
4)click [Brush Button] change the [LIMO port] to 101
5)on the right side, you could select 1~16 to narrow down the range of searching ports
6)click [ok]
4. Reflash Firmware
1)click the [Yellow Arrow Button]
2)after CRC, tool will show [READY!]
3)plug USB cable to device then the TOT install would be trigged.
4)when process go to about 80%.screens will light up
5)after upload Minios, screen shows in Blue color
6)when flashtool shows [PASS!],it means Success.
Meanwhile screen shows [Factory Reset Statu 3].
5. Reboot
1)unplug USB cable
2)pull battery and reload
3)press power button to Star your device.
PS: If process Failed, I suggest you to unplug USB cable and battery and do this method again.
At last, Here I would like to thank lgviet forum in Vietnam and hyelton who Recognized Contributor on 13th May 2015, 07:07 PM
Some Tips for LG G4 Japan aka isai vivid V32
1. ROOT
After reflash TOT firmware,the system is rooted.
so you don't need other app to root it.
If you can't get the access of root, [360 super root] and [KingRoot] would help you.
By the way,a part user of V32 say, they got bootloop after use Kingroot.
and if you load 360super root, then you can't use [Super SU#]
2. Recovery Mode
The correct way to into [Recovery Mode] is:
1) Power off device
2) Press and Hold [Vol - ] and [Power button]
3) When screen shows logo, keep press [Vol - ], release [power button] for one second, then press and hold [Power button]
4)then screen would shows [Factory data reset]
Really appreciate your effort, come from v32 tieba, LOL, wondering why my g4 charges very slow. It only charges at the rate of 0.3a and 4.2v which is unbelievable considering the fact that it supports Quick Charge
still error
Octopu25 said:
Hi~ guys, I am an android phone user from China who bought LG G4 Japanese Edition [LG isai vivid V32] last month.
After delete "google play service" in system, then reboot, but the device shows [Security Error Authentication Fail #9]
and automatic started again and again, Ops~ device bricked, GG! :crying:
As we know the resources and softwares are not friendly to LG isai vivid V32, the Firmware is also rare, cos I can't find any tip for LG V32 in XDA,
So it is more difficult for us to save the bricked device.
Due to the [Recovery Mode] still can't solve this problem, here we need to use TOT Firmware to go back to stock,
KDZ is also available to reflash, cos I didn't get the KDZ Files, so I choose TOT to reflash my device.
If your LG V32 device have bootloop or stuck on LG Logo, this method would also help you out.
Now Let me tell you the TOT Method to unbrick your LG isai vivid V32.
Before reflash firmware, you need to download the things below:
1)Download the driver
--[LGUnitedMobileDriver_S52MAN314AP22_ML_WHQL_Ver_3.14.1.exe]
2)Download Both TOT File & DLL File:
--LGV32HL-04-V10o-440-51-OCT-13-2015+0.tot
--LGFLASH_LG_G4_CODEFIRE.dll
3)Download flashtool
--[Setup_LGFlashTool_1.8.1.1023.exe]
4)Download Megalock
--[Megalock.dll]
( I am a new user, due to the policy of XDA forums, so I can not posting outside links,
the softwares which are metioned above, you could google it then download)
Install:
1. Install LGUnitedMobileDriver
2. Install LGFlashtool to C:\
3. Don’t run Flashtool at first, cos you will find that is locked
4. Copy [MegaLock.dll] file to C:\LG\LGFlashtool,
Replace the old MegaLock.dll file to unlock.
5. Extract the TOT file from the Zip,ready for using.
6. Ensure the softwares would work, restart your Windows.
1. Download Mode/Firmware Update
1)power off device
2)press and hold [Vol+] then plug USB cable on connect to pc
3)device shows [Download Mode]
2. Change COM port to 41
1)go to Windows [Device Manager]
2)double click [LGE Mobile USB Serial Port] and tap to [Advanced]
3)change the COM Port to COM 41 then click ok.
4)unplug USB cable but keep device in Download Mode.
3. Import the Firmware
1)Run LG Flashtool
2)in the tool you can see [Model Config]
3)select [Manual Mode],select .dll in files, select TOT Firmware
4)click [Brush Button] change the [LIMO port] to 101
5)on the right side, you could select 1~16 to narrow down the range of searching ports
6)click [ok]
4. Reflash Firmware
1)click the [Yellow Arrow Button]
2)after CRC, tool will show [READY!]
3)plug USB cable to device then the TOT install would be trigged.
4)when process go to about 80%.screens will light up
5)after upload Minios, screen shows in Blue color
6)when flashtool shows [PASS!],it means Success.
Meanwhile screen shows [Factory Reset Statu 3].
5. Reboot
1)unplug USB cable
2)pull battery and reload
3)press power button to Star your device.
PS: If process Failed, I suggest you to unplug USB cable and battery and do this method again.
At last, Here I would like to thank lgviet forum in Vietnam and hyelton who Recognized Contributor on 13th May 2015, 07:07 PM
Click to expand...
Click to collapse
I've tried many times, but still failed, there is a solution?
Same broblem
Same broblem
arfans said:
I've tried many times, but still failed, there is a solution?
Click to expand...
Click to collapse
i have the solution
you can pm / inbox / private messages to me if you want
i have the correct dll for yor lg v32
F.Dhil said:
i have the solution
you can pm / inbox / private messages to me if you want
i have the correct dll for yor lg v32
Click to expand...
Click to collapse
I flash it by octopus box lg software .
Now loop reboot and can't enter download mode
Solusion please
Help me for LG V32 bootlop
Octopu25 said:
Hi~ guys, I am an android phone user from China who bought LG G4 Japanese Edition [LG isai vivid V32] last month.
After delete "google play service" in system, then reboot, but the device shows [Security Error Authentication Fail #9]
and automatic started again and again, Ops~ device bricked, GG! :crying:
As we know the resources and softwares are not friendly to LG isai vivid V32, the Firmware is also rare, cos I can't find any tip for LG V32 in XDA,
So it is more difficult for us to save the bricked device.
Due to the [Recovery Mode] still can't solve this problem, here we need to use TOT Firmware to go back to stock,
KDZ is also available to reflash, cos I didn't get the KDZ Files, so I choose TOT to reflash my device.
If your LG V32 device have bootloop or stuck on LG Logo, this method would also help you out.
Now Let me tell you the TOT Method to unbrick your LG isai vivid V32.
Before reflash firmware, you need to download the things below:
1)Download the driver
--[LGUnitedMobileDriver_S52MAN314AP22_ML_WHQL_Ver_3.14.1.exe]
2)Download Both TOT File & DLL File:
--LGV32HL-04-V10o-440-51-OCT-13-2015+0.tot
--LGFLASH_LG_G4_CODEFIRE.dll
3)Download flashtool
--[Setup_LGFlashTool_1.8.1.1023.exe]
4)Download Megalock
--[Megalock.dll]
( I am a new user, due to the policy of XDA forums, so I can not posting outside links,
the softwares which are metioned above, you could google it then download)
Install:
1. Install LGUnitedMobileDriver
2. Install LGFlashtool to C:\
3. Don’t run Flashtool at first, cos you will find that is locked
4. Copy [MegaLock.dll] file to C:\LG\LGFlashtool,
Replace the old MegaLock.dll file to unlock.
5. Extract the TOT file from the Zip,ready for using.
6. Ensure the softwares would work, restart your Windows.
1. Download Mode/Firmware Update
1)power off device
2)press and hold [Vol+] then plug USB cable on connect to pc
3)device shows [Download Mode]
2. Change COM port to 41
1)go to Windows [Device Manager]
2)double click [LGE Mobile USB Serial Port] and tap to [Advanced]
3)change the COM Port to COM 41 then click ok.
4)unplug USB cable but keep device in Download Mode.
3. Import the Firmware
1)Run LG Flashtool
2)in the tool you can see [Model Config]
3)select [Manual Mode],select .dll in files, select TOT Firmware
4)click [Brush Button] change the [LIMO port] to 101
5)on the right side, you could select 1~16 to narrow down the range of searching ports
6)click [ok]
4. Reflash Firmware
1)click the [Yellow Arrow Button]
2)after CRC, tool will show [READY!]
3)plug USB cable to device then the TOT install would be trigged.
4)when process go to about 80%.screens will light up
5)after upload Minios, screen shows in Blue color
6)when flashtool shows [PASS!],it means Success.
Meanwhile screen shows [Factory Reset Statu 3].
5. Reboot
1)unplug USB cable
2)pull battery and reload
3)press power button to Star your device.
PS: If process Failed, I suggest you to unplug USB cable and battery and do this method again.
At last, Here I would like to thank lgviet forum in Vietnam and hyelton who Recognized Contributor on 13th May 2015, 07:07 PM
Click to expand...
Click to collapse
Halo Brother,
Help me please, my device LG v32 bootlop,
could you give me link for that firmware?
Thanks vv much
STOCK ROM
Hello everyone!
I know this phone barely has stock rom files available for download but I want to know if any of you have the marshmallow version LGV3220g to download.
I'm stuck with 5.1 and I can't even update it on OTA because I'm not in Japan...