Database Users

jellybean problem

hi, this is my first post here and I have a big problem with instal rom 28-07-12][ROM] PARANOID JELLYBEAN HD2 ALPHA 2 [HYBRID/CM10][A2SD][tytung_HWA_r3.2] i have done everythink, but when phone reset after cwm instalation the screen with jellybean is neverending showing,
what i have fals done ? I have instalet the newest cwm 5 , pleas help and sorry for my bad english.

Adrianox2 said:
hi, this is my first post here and I have a big problem with instal rom 28-07-12][ROM] PARANOID JELLYBEAN HD2 ALPHA 2 [HYBRID/CM10][A2SD][tytung_HWA_r3.2] i have done everythink, but when phone reset after cwm instalation the screen with jellybean is neverending showing,
what i have fals done ? I have instalet the newest cwm 5 , pleas help and sorry for my bad english.
Click to expand...
Click to collapse
What CWM partition size did you install? Make sure it's at least the one stated in the ROM's OP, or more.

Nigeldg said:
What CWM partition size did you install? Make sure it's at least the one stated in the ROM's OP, or more.
Click to expand...
Click to collapse
sorry im noob in instaling adnroid on htc hd how to partion sise ?? can you tell me step by step ?

Adrianox2 said:
sorry im noob in instaling adnroid on htc hd how to partion sise ?? can you tell me step by step ?
Click to expand...
Click to collapse
Did U install the CWM or did u ask someone to do it?
Anyways, if u installed CWM from the files then all u need to do is open the flash.cfg document with the notepad. NOT the flash.cfg.txt.
When you open the document, edit the line
"system ya xxxM"
Change the number in this line.
In place of the 'xxx' type in your desired partition
Check the partition in the thread for your rom

adil1508 said:
Did U install the CWM or did u ask someone to do it?
Anyways, if u installed CWM from the files then all u need to do is open the flash.cfg document with the notepad. NOT the flash.cfg.txt.
When you open the document, edit the line
"system ya xxxM"
Change the number in this line.
In place of the 'xxx' type in your desired partition
Check the partition in the thread for your rom
Click to expand...
Click to collapse
i can't find " flash.cfg" anywhere , I install the CWM by Quote:
For MAGLDR up to 1.13, booting from SDCard (SD-files version):
Download the file attached
Extract the files to the root directory of your sdcard
Start recovery within MAGLDR with menu point "AD SD"
Recovery should start
You're done
help me. :crying:

Adrianox2 said:
i can't find " flash.cfg" anywhere , I install the CWM by Quote:
For MAGLDR up to 1.13, booting from SDCard (SD-files version):
Download the file attached
Extract the files to the root directory of your sdcard
Start recovery within MAGLDR with menu point "AD SD"
Recovery should start
You're done
help me. :crying:
Click to expand...
Click to collapse
Why on earth would you install SD Android when you can flash NAND Android?
Just follow this guide. Use the partition size stated in the OP of your ROM. To edit the partition size, download one of the CWM things attached at the end of the guide I posted and open it, then open flash.cfg and edit system ya = xxx to whatever you need and flash as stated in the guide.

nigeldg said:
why on earth would you install sd android when you can flash nand android?
Just follow this guide. Use the partition size stated in the op of your rom. To edit the partition size, download one of the cwm things attached at the end of the guide i posted and open it, then open flash.cfg and edit system ya = xxx to whatever you need and flash as stated in the guide.
Click to expand...
Click to collapse
ok thanks bro , jellybean run as bolt in olimpic games

[Flashable][GT-I9070] EMMC repartition

Hello, am new here so if I did something wrong please correct me OK
-presentation:
we all love running latest android versions and install big a** games like asphalt 8 and have all the Google apps that we love
But in Janice it's some kind of impossible to do all of that ( come on its only 4 years old!!)
As they say no impossible under the sun now you can easily increase system or data or what ever partition your want just by flashing a Lil file and without losing a single file
-Warning:
Me and XDA are not responsible for any soft hard leaks or what ever you are doing this by your self!!!
Make a full backup(system data boot) before starting..
DO NOT USE THIS FILE WITH ROMS THAT USE CACHE (CM10.2)
-Requirements:
1. Janice or Janice-p(not tested)
2. TWRP Recovery (Any Version)
3. The attached file
Instruction:
1. Download the repartition file
-rename the file with your favorite partition sizes like "lanchon-repit-20160317-system=1-data=max-cache=0.03125 wipe-preload=min wipe-fota=min wipe ext4-sdcard=2-janice.zip" which means 1gb system 2gb sdcard and the rest will go to data partition so you will be able to install more apps
2. Boot into TWRP and make a backup
3. Flash the repartition file of your desire
4. Take a nap or watch big bang theory just waste some time
5. When the script finish restore your backup and reboot
6. Enjoy your games or what ever
-Credit:
1. @Lanchon
2. @madkita
If you want a file with your own sizes just write or in comments and i'll do my best to offer it to you

hi,
thanks for the guide! a couple of comments:
1) i suggest people get REPIT from its main site:
https://github.com/Lanchon/REPIT
the files posted here are already very old, i've updated REPIT several times.
also, i only provide support for the latest version. older versions are unsupported.
2) if you download the files from here, they will not work.
(XDA messes with the filenames changing = for -)
3) you don't need to backup anything unless you want to revert the flashing of the kernel.
4) you don't need to flash any particular kernel to run REPIT, you just need a recent TWRP build.
5) TWRP with gparted is not needed anymore: REPIT now bundles gparted and other tools.
6) the configurations proposed here are incorrect. you should use:
a) if you want 3GB data and rest as internal sdcard:
-system=1.0-data=3.0-cache=0.03125+wipe-preload=min+wipe-fota=min+wipe+ext4-sdcard=max.zip
b) if you have an external sdcard, and want 6GB data and a very small internal sdcard:
-system=1.0-data=max-cache=0.03125+wipe-preload=min+wipe-fota=min+wipe+ext4-sdcard=0.0625+wipe.zip
then your internal sdcard will be useless. so you need to swap internal and external sdcards as detailed here:
http://forum.xda-developers.com/gal...ment/mod-internal-memory-repartition-t2863629
these configurations will keep contents of system and data. if you don't care about their contents, configure wiping (add '+wipe') for those partitions and REPIT will repartition much faster then.
7) read REPIT manual before using!
https://github.com/Lanchon/REPIT

Lanchon said:
hi,
thanks for the guide! a couple of comments:
1) i suggest people get REPIT from its main site:
https://github.com/Lanchon/REPIT
the files posted here are already very old, i've updated REPIT several times.
also, i only provide support for the latest version. older versions are unsupported.
2) if you download the files from here, they will not work.
(XDA messes with the filenames changing = for -)
3) you don't need to backup anything unless you want to revert the flashing of the kernel.
4) you don't need to flash any particular kernel to run REPIT, you just need a recent TWRP build.
5) TWRP with gparted is not needed anymore: REPIT now bundles gparted and other tools.
6) the configurations proposed here are incorrect. you should use:
a) if you want 3GB data and rest as internal sdcard:
-system=1.0-data=3.0-cache=0.03125 wipe-preload=min wipe-fota=min wipe ext4-sdcard=max.zip
b) if you have an external sdcard, and want 6GB data and a very small internal sdcard:
-system=1.0-data=max-cache=0.03125 wipe-preload=min wipe-fota=min wipe ext4-sdcard=0.0625 wipe.zip
then your internal sdcard will be useless. so you need to swap internal and external sdcards as detailed here:
http://forum.xda-developers.com/gal...ment/mod-internal-memory-repartition-t2863629
these configurations will keep contents of system and data. if you don't care about their contents, configure wiping (add ' wipe') for those partitions and REPIT will repartition much faster then.
7) read REPIT manual before using!
https://github.com/Lanchon/REPIT
Click to expand...
Click to collapse
Thus settings are right this is the same file I used and it worked perfectly and I told you I created this threat for noobs who can't understand github and there download section is not working for me it says "try again in 30 minutes" that's why I use old files

madkita said:
Thus settings are right this is the same file I used and it worked perfectly and I told you I created this threat for noobs who can't understand github and there download section is not working for me it says "try again in 30 minutes" that's why I use old files
Click to expand...
Click to collapse
lol no, without the '-sdcard=...' specifier those files won't work, trust me.

Lanchon said:
lol no, without the '-sdcard=...' specifier those files won't work, trust me.
Click to expand...
Click to collapse
Yeah thank you updated OP

first of all thank you both
just to be sure, i have a couple of questions:
- how much space does a full backup take?
- what is the limit to the repartition? right now i'd like to add one gigabyte to system for apps, which numbers do i need to write in the zip name?
- what does the "wipe preload" and "wipe fota" strings do?

TheSteve87 said:
first of all thank you both
just to be sure, i have a couple of questions:
- how much space does a full backup take?
- what is the limit to the repartition? right now i'd like to add one gigabyte to system for apps, which numbers do i need to write in the zip name?
- what does the "wipe preload" and "wipe fota" strings do?
Click to expand...
Click to collapse
In TWRP it will be around 500-600mb with compression
lanchon-repit-20160317-system=1-data=max-cache=0.03125 wipe-preload=min wipe-fota=min wipe ext4-sdcard=2-janice.zip
Just rename the file to this and your will have 1gb system 2gb SD card and the rest well go to data if you want to edit a partition size for example the number 1 after system means the system will be 1gb and the number 2 in front of SD card means the SD card will be 2gb and max in front of data means the rest well go to data partition
Preload and fota are partition used in only stock ROMs and stock based ROMs so if you are running a custom ROM this will give you more space in the partition your set to max

thanks to both devs, i have one question is it compatible with cm13 ?
will i be able to re-size F2fs or i need a EXT4 to use this tool .

i just did everything but i'm not sure it worked
i used this name for the flashable zip
lanchon-repit-20160317-system=1-data=max-cache=0.03125 wipe-preload=min wipe-fota=min wipe ext4-sdcard=2-janice
but in system info it still says that data is 3.91GB, and i have 1.84GB for SDcard
maybe i should have gone further and give 3GB to SDcard?

TheSteve87 said:
i just did everything but i'm not sure it worked
i used this name for the flashable zip
lanchon-repit-20160317-system=1-data=max-cache=0.03125 wipe-preload=min wipe-fota=min wipe ext4-sdcard=2-janice
but in system info it still says that data is 3.91GB, and i have 1.84GB for SDcard
maybe i should have gone further and give 3GB to SDcard?
Click to expand...
Click to collapse
Yup it works if your wanna check system download a small app called disk info
If you want 3gb on sdcard change the 2 number in front of it this will give you 2gb on data

DaksAnkit said:
thanks to both devs, i have one question is it compatible with cm13 ?
will i be able to re-size F2fs or i need a EXT4 to use this tool .
Click to expand...
Click to collapse
Yup 100%
Make a backup first and when resizing all partitions will be formated to ext4 then restore your backup it will automatically format them to f2fs

ayt man thanks , trying it right away !!
edit : getting error 1 in twrp 3.0.0 on cm13 rom I THOUGHT IT WAS compatible with repit , as said on the GITHUB
also i tried flashing zip from github page of lanchon , that zip also did not worked it said something like couldn`t find meta-inf lanchon REPIT.
??? where did i went wrong i just flashed the zip from twrp it did nt worked i moved the file to /tmp then tried there also same error .

DaksAnkit said:
ayt man thanks , trying it right away !!
edit : getting error 1 in twrp 3.0.0 on cm13 rom I THOUGHT IT WAS compatible with repit , as said on the GITHUB
also i tried flashing zip from github page of lanchon , that zip also did not worked it said something like couldn`t find meta-inf lanchon REPIT.
??? where did i went wrong i just flashed the zip from twrp it did nt worked i moved the file to /tmp then tried there also same error .
Click to expand...
Click to collapse
Cm13 recovery doesn't have parted script you have to use the recovery I provided in first post just follow it

madkita said:
Cm13 recovery doesn't have parted script you have to use the recovery I provided in first post just follow it
Click to expand...
Click to collapse
nope , it says error 1
invalid partition configuration ,.. sdcard : sdcard=max.zip
i flashed the kernel then renamed the file attached to ..
-system=1.0-data=3.0-cache=0.03125+wipe-preload=min+wipe-fota=min+wipe+ext4-sdcard=max.zip
something is not right can you please help , i would like to have 1 gb system n 2 or 3gb in data partitions correct me if i am wrong if the size configuration is wrong ?? what should i do.
also so i have to now restore my backup to get back to cm13 coz i am stuck at recovery ? any shortcut,like(flashing cm13 kernel) to go back to system as it was before or i have to restore the backup ?

DaksAnkit said:
nope , it says error 1
invalid partition configuration ,.. sdcard : sdcard=max.zip
i flashed the kernel then renamed the file attached to ..
-system=1.0-data=3.0-cache=0.03125+wipe-preload=min+wipe-fota=min+wipe+ext4-sdcard=max.zip
something is not right can you please help , i would like to have 1 gb system n 2 or 3gb in data partitions correct me if i am wrong if the size configuration is wrong ?? what should i do.
Click to expand...
Click to collapse
Use this and don't miss with it
lanchon-repit-20160317-system=1-data=2-cache=0.03125+wipe-preload=min+wipe-fota=min+wipe+ext4-sdcard=max-janice.zip

madkita said:
Use this and don't miss with it
lanchon-repit-20160317-system=1-data=2-cache=0.03125+wipe-preload=min+wipe-fota=min+wipe+ext4-sdcard=max-janice.zip
Click to expand...
Click to collapse
Thanks man , i sorted it out the problem was silly , i had checked option in windows to
HIDE EXTENSION NAMES OF KNOWN FILE TYPES , so i was just copying and the .zip kepton adding twice
.zip.zip and that is what was happening anyhow the device has started reparting , so one last question after when this process is over , i just install my backup and that is it ? right !!

DaksAnkit said:
Thanks man , i sorted it out the problem was silly , i had checked option in windows to
HIDE EXTENSION NAMES OF KNOWN FILE TYPES , so i was just copying and the .zip kepton adding twice
.zip.zip and that is what was happening anyhow the device has started reparting , so one last question after when this process is over , i ust install my backup and that is it ? right !!
Click to expand...
Click to collapse
Yup just restore your backup and you're done ?

madkita said:
yup just restore your backup and you're done
Click to expand...
Click to collapse
alrighty then !!
:good:
I`ll post how did it go later in the thread .
you have a good day bro enjoy sunday .. cheers

Can someone here confirm that the kernel cm12.1 (OP) can be installed in the latest CM11 ROM by epirex? And if repit could work after 12.1 Kernel installed in CM11 ROM? Thanks in advance.

TPD-21 said:
Can someone here confirm that the kernel cm12.1 (OP) can be installed in the latest CM11 ROM by epirex? And if repit could work after 12.1 Kernel installed in CM11 ROM? Thanks in advance.
Click to expand...
Click to collapse
First make a backup with your cm11's kernel then flash cm12.1 kernel then flash the script and the kernel doesn't t care about your current rom so it should work every where

[FIXED] Cannot update from 7.1 to 7.1.1 Unofficial AOSP N - Jiayu S3 [MT6752]

Hi everyone, I have installed in my Jiayu S3 the mentioned AOSP N 7.1, and that process was seamless.
Now, to update to 7.1.1 I read from the ROM thread:
Update for 7.1.1
Q: Can't install rom, TWRP says "Updater process ended with ERROR 7
A: Since 7.1.1 Update, you'll need to unmount /system first , then you can proceed with rom install.
Click to expand...
Click to collapse
I have tried many different ways to do that but I always get the ERROR 7 message and I cannot update.
For example, this is what I have done in one of my trials:
- Restart in Recovery
- From Recovery,
-- Wipe cache, dalvik, data & system
-- Mount section, deselect "system" and leave only cache, data, micro sdcard (deselected "mount system partition read-only")
-- Install section, select the update 7.1.1 zip file and install it.
-- Here is where the process stops and I get the error.
I have tried other ways (like wiping only cache, dalvik & data), mounting the system read only or combinations of those, but I cannot get it to work.
Any help is much appreciated! Can someone explain in a more detailed way how to install?
Thanks a lot in advance.
Ps. I would have asked in the ROM thread but I do not have sufficient permission for that.
Ps2. Here is a log of my problem: https://www.zerobin.net/?f8e33fec02b06703#Gn8wb81G+6zF7mssoMRDS2PK60GAfKnQerhfsJW3Myc=
EDIT: I managed to fix the problem, see my answer in the comments.

marabelec said:
Hi everyone, I have installed in my Jiayu S3 the mentioned AOSP N 7.1, and that process was seamless.
Now, to update to 7.1.1 I read from the ROM thread:
I have tried many different ways to do that but I always get the ERROR 7 message and I cannot update.
For example, this is what I have done in one of my trials:
- Restart in Recovery
- From Recovery,
-- Wipe cache, dalvik, data & system
-- Mount section, deselect "system" and leave only cache, data, micro sdcard (deselected "mount system partition read-only")
-- Install section, select the update 7.1.1 zip file and install it.
-- Here is where the process stops and I get the error.
I have tried other ways (like wiping only cache, dalvik & data), mounting the system read only or combinations of those, but I cannot get it to work.
Any help is much appreciated! Can someone explain in a more detailed way how to install?
Thanks a lot in advance.
Ps. I would have asked in the ROM thread but I do not have sufficient permission for that.
Ps2. Here is a log of my problem: https://www.zerobin.net/?f8e33fec02b06703#Gn8wb81G+6zF7mssoMRDS2PK60GAfKnQerhfsJW3Myc=
Click to expand...
Click to collapse
I just found this post:
https://forum.xda-developers.com/showthread.php?t=2522762
I will try to do what it says and report on the result.
As a request to the developers, it would be nice if the necessary change is already included in the ROM itself, but whatever.
Ciao!

marabelec said:
I just found this post:
https://forum.xda-developers.com/showthread.php?t=2522762
I will try to do what it says and report on the result.
As a request to the developers, it would be nice if the necessary change is already included in the ROM itself, but whatever.
Ciao!
Click to expand...
Click to collapse
Indeed, the post I refer up there was the solution to the problem.
I paste here my steps:
Download the ROM zip file and unpack. I used the file "aosp_7.1.1_s3_h560_20170213.zip"
Open in a text editor the file META-INF/com/google/android/updater-script
Remove the line starting with "assert". In this case the line was number 2. (Remember, even if in your editor it shows in several lines, you have to delete until the semi-colon.)
Save file.
Repack everything into a new .zip file, e.g. "aosp_7.1.1_s3_h560_20170213-FIX_ERROR7.zip".
Use that file to update your 7.1 to 7.1.1 from your TWRP.
Enjoy!

you need to unmount system first.

[fix] easy fix for balong issue

Hi!
i create a software to fix Balong issue after flashing a ROM.
Download the zip, extract the folder then only need to follow the steps in software!
Check the pictures bellow!
If fails check if cust image is properly installed before execute the software again.
Tell me if worked for you!
.

Thanks.

I've installed TWRP 3.1.1-0, but when I use your software it says "error: no devices/emulators found", even if I put the correct cust path

persona78 said:
Hi!
i create a software to fix Balong issue after flashing a ROM.
Download the zip, extract the folder then only need to follow the steps in software!
Check the pictures bellow!
If fails check if cust image is properly installed before execute the software again.
Tell me if worked for you!
.
Click to expand...
Click to collapse
Hi
After an update (official!) I re-encountered BALONG. After using your marvelous tool, it worked again, but there's no need to reset device (as written on CMD).
In addition, for the ones that get the error "no device attached" or something similar, you've only to reboot to TWRP, connect the phone to Windows and press Win+X, click on "device manager", look for "android device" or something similar. Right click on it and select "update driver", click the second option and than select that you already have the CD driver. You'll see a list: select "ADB composite device" and than finish: you've done!
Ah, I was about to forget: thank you!
Regards,
F

fixed
Hi.
Thanks for fast answer. I could fix the problem.
I downloaded the EMUI 3.1 as Magyar Telekom firmware from an arabic server cause ru huawei servers doesnt work lol. So I downloaded it I extracted boot, recovery, system, cust img files from UPDATE.APP with Huawei AppImage Extractor application. I flashed these with fastboot (Not TWRP, not huawei recovery). Fastboot from computer. Ok. But at the moment SIM does not work. I upgraded the system from Huawei update from settings (not recovery, system settings). After update the ROM and SIM is work perfectly.
Btw thanks your answer, topices too. This is a big help from you.
Have a nice day, Balázs.

How Can i use it for Meanaf Localization ????
How Can i use it for Meanaf Localization ????
@persona78
can you provide me Tool To fix Balong
Countryakistan
Mobile:ALE-L21
ROM:C185

Hello thanks for creating such tool
I've tried to use it but i get this error after TWRP boot :
mount: No such file or directory
mkdir: '/cust/hw': No such file or directory
ln: cannot create symbolic link from '/cust/hw/eu' to '/cust/hw/meafnaf': No such file or directory
Is there any solution for this?

-Mouhammad said:
Hello thanks for creating such tool
I've tried to use it but i get this error after TWRP boot :
mount: No such file or directory
mkdir: '/cust/hw': No such file or directory
ln: cannot create symbolic link from '/cust/hw/eu' to '/cust/hw/meafnaf': No such file or directory
Is there any solution for this?
Click to expand...
Click to collapse
Which Cust Path Do you Want?
hw/meafnaf?

MohmmadUzairKhan said:
Which Cust Path Do you Want?
hw/meafnaf?
Click to expand...
Click to collapse
The program detected this path : cust/hw/meanfaf
Is this what you mean?

-Mouhammad said:
The program detected this path : cust/hw/meanfaf
Is this what you mean?
Click to expand...
Click to collapse
What Do You Want?
hw/eu?

MohmmadUzairKhan said:
What Do You Want?
hw/eu?
Click to expand...
Click to collapse
Do you know what cuases this error?

Thank you its working excellent . And wipe is not needed. Tnx again ?

pls say me
how can i fix it with opened bootloader? must i flash cast?

Doesn't work. Did everything by the instructions. Twice.

[SOLVED][FIX] Unable to Mount Storage

Hi,
Guys
If you are facing
Unable to Mount Storage​
error in recovery
But you are able to access files from the OS then
I have found a solution for this problem
This is not device specific
Just Flash the attached zip
and wait for it to complete
it may take upto 0.5 hours
so be patient​This will not wipe Internal Storage
This is not my work I am just sharing it
All credits to @osm0sis
If this also does not work then flashing fastboot image is the final solution

So you just renamed my sdcard fix permissions zip and opened your own thread? That's pretty inappropriate.
It also doesn't take anywhere close to 30 min, so that's inaccurate.
I appreciate you gave me full credit, but you should remove your attachment and just link to my thread's download and ideally link the thread itself you got it from please.

osm0sis said:
So you just renamed my sdcard fix permissions zip and opened your own thread? That's pretty inappropriate.
It also doesn't take anywhere close to 30 min, so that's inaccurate.
I appreciate you gave me full credit, but you should remove your attachment and just link to my thread's download and ideally link the thread itself you got it from please.
Click to expand...
Click to collapse
OK Sir
I got the zip in that name and in script their was your name So I credited you
Sorry for any inconvenience it caused to you.
?

Please go here and download the sdcard fix permission zip