I flashed AICP last week then i got back to Stock rom but now everytime i restart or switch on my phone gets into bootloader mode even when i try to install ota i get into bootloader mode then i have to get onto recovery mode to install ota.please help
Volume down button stuck?
I've seen this come up before... Did read through q&a?
lafester said:
I've seen this come up before... Did read through q&a?
Click to expand...
Click to collapse
Yeah but i can't find any give me the link.
You are probably still in oem flash mode, after you flashed stock ROM did you enter 'fastboot oem fb_mode_clear'? If you didn't, everytime you restart it will return to the bootloader.
acejavelin said:
You are probably still in oem flash mode, after you flashed stock ROM did you enter 'fastboot oem fb_mode_clear'? If you didn't, everytime you restart it will return to the bootloader.
Click to expand...
Click to collapse
I followed the commands given in forum for installing stock rom the final command was 'fastboot reboot' it didn't have the command you mentioned.
[email protected] said:
I followed the commands given in forum for installing stock rom the final command was 'fastboot reboot' it didn't have the command you mentioned.
Click to expand...
Click to collapse
It should be the command right before the reboot. I don't know what instructions your following, but I've flashed several Motos.
Sent from my XT1575 using Tapatalk
acejavelin said:
It should be the command right before the reboot. I don't know what instructions your following, but I've flashed several Motos.
Click to expand...
Click to collapse
CODE]adb reboot bootloader
fastboot flash partition gpt.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot reboot[/CODE]
I used these commands to flash the rom does adding the command you mentioned before 'fastboot reboot' solve the problem. By the way thanks for replying.
[email protected] said:
CODE]adb reboot bootloader
fastboot flash partition gpt.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot reboot[/CODE]
I used these commands to flash the rom does adding the command you mentioned before 'fastboot reboot' solve the problem. By the way thanks for replying.
Click to expand...
Click to collapse
Hmmm... this is the procedure I have, granted it's from the Moto G3, but both the X Pure/Style and G 2015 are Moto 3rd Gen devices...
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem fb_mode_clear
fastboot reboot
acejavelin said:
Hmmm... this is the procedure I have, granted it's from the Moto G3, but both the X Pure/Style and G 2015 are Moto 3rd Gen devices...
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem fb_mode_clear
fastboot reboot
Click to expand...
Click to collapse
Thanks will try this commands
[email protected] said:
Thanks will try this commands
Click to expand...
Click to collapse
Look at the servicefile.xml in the image, it should contain all the commands, it gives the exact procedure, you just have to interpret it correctly.
I need the procedure to flash Firmware MPJ24.139-64/65 for Moto G4 XT1625. ; which is the procedure to follow?.
I have the device currently in soft brick state.
Many thanks for you help and support.
GersonS001 said:
I need the procedure to flash Firmware MPJ24.139-64/65 for Moto G4 XT1625. ; which is the procedure to follow?.
I have the device currently in soft brick state.
Many thanks for you help and support.
Click to expand...
Click to collapse
There are a several posts that show how to do this. Try searching the forums instead of expecting others to do it for you.
Firmware Download: http://a df.ly/1fRBXU
Firmware pass : www.stockrom.net
To get the download firmware please link the letter a to df.ly
Use this instruccions to flash with fastboot:
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem fb_mode_clear
fastboot reboot
I installed and rooted with TWRP in June. I thought it just installs updates via bootloader, but it needs stock recovery. So, I'm stuck with a update waiting, and it's required to update to Naugat. I tried installing Naugat from a zip, but I kept getting errors. Help?
http://www.filefactory.com/file/x59...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
This is the link ,
Install commands are
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin mfastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0 fastboot flash system system.img_sparsechunk.1 fastboot flash system system.img_sparsechunk.2 fastboot flash system system.img_sparsechunk.3 fastboot flash system system.img_sparsechunk.4 fastboot flash system system.img_sparsechunk.5 fastboot flash system system.img_sparsechunk.6 fastboot flash system system.img_sparsechunk.7 fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem fb_mode_clear
fastboot reboot
Extract the file where you have twrp copy. So you dont have to install any driver.
Then run command prompt type "fastboot devices"
It will show som3 id if you device should be detected. Befor doing this you must be in bootloader state
Akash Sharma123 said:
http://www.filefactory.com/file/x59...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
This is the link ,
Install commands are
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin mfastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0 fastboot flash system system.img_sparsechunk.1 fastboot flash system system.img_sparsechunk.2 fastboot flash system system.img_sparsechunk.3 fastboot flash system system.img_sparsechunk.4 fastboot flash system system.img_sparsechunk.5 fastboot flash system system.img_sparsechunk.6 fastboot flash system system.img_sparsechunk.7 fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem fb_mode_clear
fastboot reboot
Extract the file where you have twrp copy. So you dont have to install any driver.
Then run command prompt type "fastboot devices"
It will show som3 id if you device should be detected. Befor doing this you must be in bootloader state
Click to expand...
Click to collapse
I keep getting errors where it cant find it.
lometon said:
I keep getting errors where it cant find it.
Click to expand...
Click to collapse
Im stupid. I was putting it in the wrong folder... I had to put it in Program Files. *facepalm*
My questions are at bottom.
Context:
I recently tried to go back to my stock from lineageos. I successfully did it through this youtube video but I've run into a couple of problems.
Youtube Video Titled: MOTO G5 PLUS STOCK ROM FLASHING | UNBRICK/UNROOT MOTO G5 PLUS
(I'm not allowed to post links)
I used firmware NPN25.137-35
after I flashed twrp, no-verity-check and magisk v14
After mistakenly tried to apply an OTA update(I know better now) my phone always boots into recovery. I discovered this when the updated tried to restart to install. I have to boot to bootloader and press the power button when the selection is on "start". I'm not sure if the OTA had anything to do with that.
The fastboot commands I used where this to install the stock ROM
Code:
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem fb_mode_clear
fastboot reboot
Questions:
1. If I want to download the stock image directly from the "firmware.center" which one do I choose and how do I know? There are 9 of them..
2. Do I ever need to unlock my bootloader again or is that a one time thing?
3. Do those fastboot commands and the stock image bring my moto g5 plus back to the way it was completely when I unpackaged it (minus unlocked bootloader)?
4. Can I run those fastboot commands without unzipping the stock *.xml.zip?
5. Where did these commands come from? Is it common knowledge that they work? Or is a fastboot sequence provided by motorola?
6. Does "just" attempting an OTA update mess stuff up on a rooted android?
Hi Guys
I bricked my phone because I did something wrong. I need help.
I have a rooted Moto g7 (river) running android pie.
I decided to upgrade it to android 10.
1. I downloaded the latest android 10 version from:
lolinet mirrors - firmware, software, iso etc.
lolinet mirrors - powered by h5ai
mirrors.lolinet.com
2. created new C:\adb2021 folder in laptop
obtained latest adb/fastboot from
https://developer.android.com/studio/releases/platform-tools
unziped the zip contents into the new C:\adb2021
3. Connected by cable and turned on phone
4. In a CMD prompt on W10 went to in C:\adb2021
5. adb reboot bootloader
was successful
6. I then ran
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash dsp adspso.bin
fastboot flash boot boot.img
fastboot flash dtbo dtbo.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash system_b system_b.img_sparsechunk.0
fastboot flash system_b system_b.img_sparsechunk.1
fastboot flash system_b system_b.img_sparsechunk.2
fastboot flash vendor vendor.img_sparsechunk.0
fastboot flash vendor vendor.img_sparsechunk.1
fastboot flash vendor vendor.img_sparsechunk.2
fastboot flash oem oem.img
fastboot flash oem_b oem_other.img
fastboot erase carrier
fastboot erase DDR
fastboot flash logo logo.bin
patched_boot.img
fastboot reboot
Problem:
The phone rebooted but is stuck on the
"your device has been unlocked and can't be trusted" screen.
Rebooting just brings me back to this same screen.
I can get to the Android Recovery screens but don't know what to do there.
The fastboot commands I listed above were originally designed for installing android 9. I now see I should have included fastboot flash system system.img_sparsechunk.10
When in the recovery screen "Flastboot Flash mode" I tried to issue from the laptop
C:\ADB2021>adb reboot bootloader
I get
error: no devices/emulators found
Please help. This is my main phone.
How do I recover?
Thanks.
I tried factory reset. And then reboot but it still only goes to the "this device is unlocked....." and stays there.
I really need help.