Run Viper4Android on Lollipop
Phone needed to be rooted with cfautoroot or supersu must be superuser app
Download Viper4Android SELinux Policy fix
which is attached to this post
To install, just boot into a custom recovery (TWRP, preferably), flash the zip file and reboot.
Then install viper4android and it's driver and reboot
To disable samsung stock effect follow the guide
Go to /system/priv-app/SoundAlive_20_L rename SoundAlive_20_L.apk to SoundAlive_20_L.apk.bak .
Next Go to system/lib/soundfx rename libaudiosa_sec.so to libaudiosa_sec.so.bak,
Next system/lib rename libaudiosa.so to libaudiosa.so.bak.
reboot and enjoy v4a
Related
Personal Experience
I Rooted My Samsung Galaxy Grand Via Kingroot v.3.3.1.apk because I Have No PC And Odin Method Reuires PC.So I Read Many Threads Replace Kinguser With SuperSU But None Of Them Working For Me.Then I Plan To Unroot My Device and Unrooted Successfully.I Have "Replace Kjnguser With SuperSu.zip that Can Be Executed By Terminal Emulator But I Flash It By Recovery And It Shows An Error And After Error It Shows You Device Is Not Rooted "ROOT NOW Yes/No.I Select Yes Then After Reboot Install SuperSu.apk In Myphone And After In Sytem And It Is Working Fine
Method :
Requirement : Custom Recovery Must Be Installed (CWM or TWRP)
Before Proceeding This Method
1)Open Kinguser App
2)Go In Kinguser Settings And Remove Root Permission
3)Use Any File Manager And Create A Zip File e.g.SuperSu.apk to SuperSu.zip And. Put It In Your External SD Card
3)Now Go Into In Recovery By Vol Up+Home+Power Key
4)Now Flash The Zip File (Install zip from Sd Card And Select From SdCard1 SuperSu.zip) It Show An Error Because It Is User Created Zip
5)Before Flashing It Shows Your Phone Is Not Rooted "Root Now"
6)Select Yes
7)Now Reboot Your Phone
8)Install SuperSU.apk Normally
9)Open SuperSU And Install Su Binary Normally
10)Go In SuperSu Settings And Install SuperSU in System
11)Reboot Your Device
12)Congrats,You have Replaced Kinguser With SuperSU
Download The Latest Version Of SuperSU.apk
Hit,Thanks If This Method Works For You
Because several Users have problems with understanding what they actually should do i think the easiest way is writing some How-to.
Guide for Unlocking Bootloader Backup TA and so on
I AM NOT RESPONSIBLE FOR ANY DAMAGES THAT MAY CAUSE YOUR DEVICE
Your Bootloader must be unlocked and TWRP recovery installed.
1. Systemless Root/Xposed
Systemless Mode means that there is no File changed in your System Partition, this works because the main changes are made in the Kernel and not to the Android System itself. Because of this you have a special file on your Internal Memory in /data/ for Systemless Root you get a su.img file and for Systemless Xposed you get a xposed.img file. If you have both sure there are both files present. These files are loaded while your device is booting before the Android System is booting. This is good for us because we can easily Update our Systems (on same Rom).
1.1 Download latest beta-superSU/systemless xposed framework and place them on your sdcard.
1.2 Reboot into recovery and flash beta-superSU/systemless xposed framework (if both, in that order)
1.3 clear cache/dalvik
1.4 reboot
2. System Root/Xposed
With System Mode your changes are direct on the System Partition and mostly Updates dont work.
2.1 System Root is not available for our Device with MM. Download latest beta-superSU/xposed Framework and place them on your sdcard.
2.2 Reboot into recovery and flash beta-superSU/xposed framework (if both, in that order)
2.3 clear cache/dalvik
2.4 reboot
3. Change your Kernel while having a Systemless modified Android
Because the changes that were made while flashing Systemless Root/Xposed, your System wont work with just flashing the new Kernel.
3.1 Download the new Kernel to your Computer (make sure it is with TWRP or you flash it seperate after flashing the Kernel).
3.2 Download latest beta-superSU/systemless xposed framework and place them on your sdcard.
3.3 Reboot your device into fastboot mode and flash the new Kernel "fastboot flash boot xxxx.img"
3.4 Reboot your device into TWRP and flash beta-superSU/systemless xposed framework (if both, in that order)
3.5 clear cache/dalvik
3.6 reboot
4. Switch between System and Systemless Mode
For Switching from System Mode to Systemless with Xposed:
4.1 Update or install Material Design xposed installer App
4.2 Download the usual xposed uninstaller zip and the systemless xposed framework for your device
4.3 Open Material Xposed Installer and deactivate the framework
4.4 Reboot into recovery
4.5 Flash the uninstaller zip
4.6 clear cache/dalvik
4.7 Flash systemless xposed framework
4.8 reboot into System (take a few minutes)
4.9 Open Material Xposed Installer and activate Systemless Xposed framework
4.10 reboot
5. Delete / uninstall Systemless Root/Xposed
5.1 Open Material Xposed Installer and deactivate the framework
5.2 restart your System
5.3 Use an Explorer with root access and delete the files "/data/su.img" and "/data/xposed.img"
5.4 restart your System
If i forgot something please tell me i will add it.
Regards
make this for locked bootloaders :/
Can you please provide the link for systemless xposed file??
:highfive:HELLO GUYS
So Here u can Find How To Bypass Safetnet In Your Phone While Being Rooted.
As you all know safetynet is implemented by Google itself to check Security of your Device & also by Some games or apps Eg. Pokeman Go,Android pay,Snapchat etc. So If Your Phone Is Rooted SafetyNet Test Will Fail.
With failed Safetynet Test You Can't Run These Apps in Your Mobile.
Check your Safetynet Status By This App:- https://play.google.com/store/apps/details?id=com.scottyab.safetynet.sample
So If your Test Failed And you can't able to run Games or Some Apps Try This method
1. Fully Unroot Your Phone In SuperSu app Go to Settings tab on the top right corner, and then click Full Unroot. Confirm with 'Continue'. 3. Once this operation is done, which takes a few minutes, you can reboot your Android & Then Flash This Unroot Script In Custom Recovery
https://forum.xda-developers.com/attachment.php?attachmentid=3931994&d=1478779893
2. Download Magisk 12.0 http://tiny.cc/latestmagisk and Flash it in Custom Recovery & Reboot **Make sure in custom recovery if a Line Appears "Boot img already patched" That means You'r Not Fully Unrooted in this case you have to flash your Stock System.img or Stock rom**
3. Now Install Magisk Manager From Play Store https://play.google.com/store/apps/details?id=com.topjohnwu.magisk
4 In Magisk manager Go To Settings Click on Enable BusyBox & Magisk Hide
5. Thats it. Now Run Safetynet test in Magisk Manager It will pass.
6.Enjoy your Games or Apps
UPDATE :- With Android Security Patch 01/04/2016 On Marshmallow Flashed SuperSu 2.79 Flashed Suhide 0.55 Flashed Magisk 12.0 Flashed Xposed 87.0 Systemless PASSING SAFETY NET Without Disabling root
Credits :-
@topjohnwu For Magisk 12.0 & Magisk Manager App
@halifax For Unroot Su Script
Hey, I have a problem:
I used this script on my Galaxy Nexus but now I decided to use SuperSU again because Magsik didn't work for me. I have just one problem: After using this script I can't install SuperSU anymore. The installation works as usual without problems but if I open the SU app it sais I need a Su file flashed. Could you please help me to fix thid problem?
Thanks in advance,
greetings Nils
yo_honey said:
:highfive:HELLO GUYS
So Here u can Find How To Bypass Safetnet In Your Phone While Being Rooted.
.....
1. Fully Unroot Your Phone In SuperSu app Go to Settings tab on the top right corner, and then click Full Unroot. Confirm with 'Continue'. 3. Once this operation is done, which takes a few minutes, you can reboot your Android & Then Flash This Unroot Script In Custom Recovery
https://forum.xda-developers.com/attachment.php?attachmentid=3931994&d=1478779893
2. Download Magisk 12.0 http://tiny.cc/latestmagisk and Flash it in Custom Recovery & Reboot **Make sure in custom recovery if a Line Appears "Boot img already patched" That means You'r Not Fully Unrooted in this case you have to flash your Stock System.img or Stock rom**
3. Now Install Magisk Manager From Play Store https://play.google.com/store/apps/details?id=com.topjohnwu.magisk
4 In Magisk manager Go To Settings Click on Enable BusyBox & Magisk Hide
5. Thats it. Now Run Safetynet test in Magisk Manager It will pass.
6.Enjoy your Games or Apps
UPDATE :- With Android Security Patch 01/04/2016 On Marshmallow Flashed SuperSu 2.79 Flashed Suhide 0.55 Flashed Magisk 12.0 Flashed Xposed 87.0 Systemless PASSING SAFETY NET Without Disabling root
Credits :-
@topjohnwu For Magisk 12.0 & Magisk Manager App
@halifax For Unroot Su Script
Click to expand...
Click to collapse
Thanks my friend, u save my day, Samsung S6 Edge +.
Flash Latest SuperSu Zip in custom recovery
MrFlashGame said:
Hey, I have a problem:
I used this script on my Galaxy Nexus but now I decided to use SuperSU again because Magsik didn't work for me. I have just one problem: After using this script I can't install SuperSU anymore. The installation works as usual without problems but if I open the SU app it sais I need a Su file flashed. Could you please help me to fix thid problem?
Thanks in advance,
greetings Nils
Click to expand...
Click to collapse
Download Latest Stable version of SuperSu zip And Flash it Using Custom Recovery. This may solve your problem.
Hello, anyone have boot img for htc 820 dual sim?
Thank you
Hello all,
This may seem like a stupid question, but I want to make sure that I know what i'm doing before I mess something up and become
So I'm running a Samsung Galaxy S5 (G900V ovbiously), and it has the tobisha emmc chip
Is the only way to gain root on Marshmallow/Nougat or whatever is by reverting to Lollipop, gaining root access, installing TWRP, and then flashing LineageOS/some ROM?
Directions For Users With CID 11 Toshiba eMMC
1. Download EMMC_11_ Root S5_QB2_PB1.zip
2. Unzip
Copy the following to your External SD card:
Root S5 Folder,
EMMC_11_PB1_5_0_1_LL_Firmware_Bootloader.zip, EMMC_11_QA1_6_0_1_MM_Firmware_Bootloaders.zip,
and the TouchWiz ROM you want to install.
3. Reboot Phone to Download Mode (Pwr +Vol Dwn+Home)
4. Use Odin 3.12 and load the COMBINATION_VZW_FA44_G900VVRU2APA1_VZW2APA1_257265 6_REV00_user_mid_noship_MULTI_CERT.tar.md5 in the AP Slot
5. Flash and let the phone reboot. It will reboot to recovery and finish install then it will reboot and take about 20 seconds to boot.
6. If you do not have an External SD Card, copy the following NOW to your Internal Storage:
Root S5 Folder,
EMMC_11_PB1_5_0_1_LL_Firmware_Bootloader.zip, EMMC_11_QA1_6_0_1_MM_Firmware_Bootloaders.zip,
and whatever TouchWiz ROM you want to install.
7. Use the File Manager in the app drawer of the phone and install Apex_Lancher.apk press home button and set Apex as the default launcher.
Install Superuser.apk, Busybox.apk and SafeStrapKK.apk do not open anything yet.
8. Now Install tr_v2.apk.
Open TowelRoot and CLICK MAKE IT RAIN . It should tell you you have succeeded.
9. Now Open Superuser app and click "New User" to install it.
Once done, open SuperSU and update the SU binaries using the "NORMAL" method. It will tell you you need to reboot. You can skip doing this. (If the Superuser install hangs for more than 5 minutes reboot phone and try to install it again.)
10. Now open the BusyBox app, grant SuperSU access and install BusyBox.
11. Now open SafeStrap, grant SuperSu access and click "install recovery". If the SafeStrap recovery fails to install, make sure BusyBox is installed by rerunning the BusyBox app (it will tell you if BusyBox is installed) if not click "install" again, reboot phone and open SafeStrap and try to install recovery again
12. Once SafeStrap Recovery is installed click "reboot to SafeStrap Recovery".
13. Once in SafeStrap Recovery, choose what firmware you want to be on:
Lollipop 5.0 Firmware=EMMC_11_PB1_5_0_1_LL_Firmware_Bootloader.zip
Marsmhallow 6.0 Firmware=EMMC_11_QA1_6_0_1_MM_Firmware_Bootloaders.zip
14. Install the firmware zip, and then flash a TouchWiz Lollipop ROM. (Here is the latest stock rooted Lollipop Rom: VZW_BPB1_ODEX_DEODEX_V9.zip). You may want to download a copy of the latest SuperSu zip, and flash if installing a Lollipop ROM that is not rooted. Remember, you cannot root Marshmallow ROMs, so do not try and flash the SuperSu zip on a Marshmallow Rom (you will softbrick if you do).
15. After you install any Lollipop ROM, you may need to reinstall SafeStrap Recovery. Most of the time you don't have to and SafeStrap can be reached by flashing the KitKat Kernel in Download Mode with ODIN. But, in some cases, when flashing a ROM that flashes a system.img instead of a system folder, you may lose SafeStrap during install. This will be the case if you install the above ROM. You can reinstall it after the ROM is booted up. A Safestrap-G900V-4.04_LL_MM.apk is included that will flash a version of SafeStrap that will allow you to reboot to SafeStrap Recovery without flashing a KitKat kernel in Odin. Install BusyBox again from the BusyBox App in the RootS5 Folder. Install Safestrap-G900V-4.04_LL_MM.apk and make sure to grant SuperSU access. It may take a few seconds to prompt. If SafeStrap is not installed, click "Install Recovery". If Safestrap is still installed click on "Uninstall Recovery", close the app, and reopen it. It should say recovery is not installed. Now click on "Install Recovery". If this doesn't work, reboot the phone and try again. Once installed, you can just click reboot to SafeStrap from the SafeStrap app and you will reboot straight to SafeStrap. Remember to flash the appropriate Kernel when leaving SafeStrap!
Download and place these on your device:
LL_KERNEL_SS-FF_Flashable.zip, and
MM_KERNEL_SS-FF_Flashable.zip
If something bad goes wrong you can usually get back to SafeStrap by simply rebooting the phone to Download Mode and flashing NI2_stock_kernel.tar.md5. When the phone reboots, watch for the SafeStrap splash screen and enter SafeStrap.
16. Do NOT change ANY boot options in SafeStrap. ROM slots cannot be used, so you must flash to the Stock ROM slot EVERY TIME OR YOU WILL SOFTBRICK. Some functions don't work in SafeStrap, like choosing an image file to flash directly. All image files must be flashed via zip file.
---------- Post added at 12:50 AM ---------- Previous post was at 12:49 AM ----------
Get the needed files at https://forum.xda-developers.com/ve.../testers-required-easier-root-method-t3561529
Here is in details and with all files on one place how to root stock Android Pie for SM-G955F device.
Please if you don't know what are you doing, better avoid this straight forward process because I presume you already knows it.
Also...it will work on ALL Pie firmware versions.
Download on your SDcard all files attached here and...
Rooting process goes as follows.
1. Flash stock firmware G955FXXU4DSBA_G955FOXM4DSBA_DBT and wait for welcome screen on device and reboot in download mode again
2. Flash latest TWRP recovery
3. Enter in TWRP recovery and allow file modifications, then
3a. Format data from recovery...reboot recovery again and repeat procedure from above
4. Install from TWRP no-verity-opt-encrypt-samsung-1.0.zip from link below.
5. Reboot recovery
6. From recovery install Magisk-v18.1(18100).zip
7. Now restart and configure your device as you need.
8. Install latest Magisk app and open app, and within app, install all necessery files
9. Now you are rooted
Install Viper4android
To prepare before, please with Root explorer app rename file audio_effects.conf in audio_effects.conf.BAK, located in folder Vendor/etc
1. Install latest busybox
2. Install ViPER4Android_FX_v2505_A7.x_Nougat_IO_test_fix.apk from here
3. Reboot device and go into TWRP
3a. Install FUSION KERNEL from link below ( one of the fastest kernels I have ever seen)
4. Install Viper drivers as usuall
5. Reboot device
Viper4android is installed.
In Settings check in Sound and vibrations menu if Viper is your default sound module, if not, select it.
.
THANK YOU NOTE GOES TO ALL DEVELOPERS WHO BLESSED US WITH THEIR WORKS !
.
MAGISK
https://www.xda-developers.com/how-to-install-magisk/
FUSION KERNEL with permissive mode
https://www.leorom.cc/index.php/fusion.html?t=1553420049699
TWRP S8+
https://forum.xda-developers.com/galaxy-s8+/development/recovery-twrp-galaxy-s8-exynos-t3594756
VIPER4ANDROID
https://forum.xda-developers.com/showthread.php?t=2191223
I do not take any responsibility for possible errors or damaged devices caused by lack of someones knowledge.
.
Does anyone tryed it?
Will try tomorrow!
Thanks!
Just followed your steps and my phone is rooted now!
keunhuvac said:
Just followed your steps and my phone is rooted now!
Click to expand...
Click to collapse
Excellent !
Btw, i use viper module in magisk manager and it works fine!
keunhuvac said:
Btw, i use viper module in magisk manager and it works fine!
Click to expand...
Click to collapse
Same here, works fine with Magisk Module ?
keunhuvac said:
Btw, i use viper module in magisk manager and it works fine!
Click to expand...
Click to collapse
Thank you for that info. I didn't tryed module rather then install standalone app. Anyway, good to work on both ways.
tin2404 said:
Here is in details and with all files on one place how to root stock Android Pie for SM-G955F device.
Please if you don't know what are you doing, better avoid this straight forward process because I presume you already knows it.
Also...it will work on ALL Pie firmware versions.
Download on your SDcard all files attached here and...
Rooting process goes as follows.
1. Flash stock firmware G955FXXU4DSBA_G955FOXM4DSBA_DBT and wait for welcome screen on device and reboot in download mode again
2. Flash latest TWRP recovery
3. Enter in TWRP recovery and allow file modifications, then
3a. Format data from recovery...reboot recovery again and repeat procedure from above
4. Install from TWRP no-verity-opt-encrypt-samsung-1.0.zip from link below.
5. Reboot recovery
6. From recovery install Magisk-v18.1(18100).zip
7. Now restart and configure your device as you need.
8. Install latest Magisk app and open app, and within app, install all necessery files
9. Now you are rooted
Install Viper4android
To prepare before, please with Root explorer app rename file audio_effects.conf in audio_effects.conf.BAK, located in folder Vendor/etc
1. Install latest busybox
2. Install ViPER4Android_FX_v2505_A7.x_Nougat_IO_test_fix.apk from here
3. Reboot device and go into TWRP
3a. Install RZ KERNEL PIE from here
4. Install Viper drivers as usuall
5. Reboot device
Viper4android is installed.
In Settings check in Sound and vibrations menu if Viper is your default sound module, if not, select it.
.
THANK YOU NOTE GOES TO ALL DEVELOPERS WHO BLESSED US WITH THEIR WORKS !
.
MAGISK
https://www.xda-developers.com/how-to-install-magisk/
RZ KERNEL with permissive mode
https://forum.xda-developers.com/ga...t/kernel-rz-kernel-samsung-galaxy-s8-t3893139
TWRP S8+
https://forum.xda-developers.com/galaxy-s8+/development/recovery-twrp-galaxy-s8-exynos-t3594756
VIPER4ANDROID
https://forum.xda-developers.com/showthread.php?t=2191223
I do not take any responsibility for possible errors or damaged devices caused by lack of someones knowledge.
.
Click to expand...
Click to collapse
what about OEM unlock, I must turn on??
jackherer72 said:
what about OEM unlock, I must turn on??
Click to expand...
Click to collapse
https://forum.xda-developers.com/sitesearch.php?q=oem unlock
Hello, you have solution for root samsung s8 + g9550zhu4dSg2 ?